This patch adds a "--reload" option to koha-plack, which allows
a sysadmin to gracefully restart Koha.
This is very useful when installing Koha plugins or deploying a hot fix
where you need to change code but don't want to interrupt anyone's
usage of Koha.
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. ps -efww | grep "starman"
4. Now at roughly the same time do the following two actions:
4a. Go to http://localhost:8081/cgi-bin/koha/about.pl
4b. koha-plack --reload kohadev
5. Note that the web request completes successfully
6. ps -efww | grep "starman"
7. Note that the "starman master" process stays alive, but the "starman worker" processes have been restarted
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
0. Apply patch
1. cp /usr/sbin/koha-plack /usr/sbin/koha-plack.bak
2. cp debian/scripts/koha-plack /usr/sbin/koha-plack
3. Now at roughly the same time do the following two actions:
3a. Go to http://localhost:8081/cgi-bin/koha/about.pl
3b. koha-plack --stop kohadev
4. Note that the HTTP request completes
5. Click on "Home"
6. Note that the error is "Service Unavailable" rather than "Proxy Error",
which would've occurred with an interrupted HTTP request/response
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Also, return 0 rather than return 1 in else clause of koha-zebra
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Stop plack, indexer, sip, worker, z3950 and zebra.
Note: To test Z39.50 restarting you will need to setup the server: https://wiki.koha-community.org/wiki/Setting_up_the_Z39.50_and_SRU_Server#Setting_up_the_Z39.50_and_SRU_Server
2. Run restart command for each service:
- [Plack] sudo koha-plack --restart {instance}
- [Indexer] sudo koha-indexer --restart {instance}
- [SIP] sudo koha-sip --restart {instance}
- [Worker] sudo koha-worker --restart {instance}
- [z3950] sudo koha-z3950-responder --restart {instance}
- [Zebra] sudo koha-zebra --restart {instance}
3. Observe the services do not get restarted.
Instead you get an error saying the service is not running
4. Apply patch
5. If you are using kohadevbox you must copy koha-* scripts to /usr/sbin/:
sudo cp debian/scripts/koha-plack /usr/sbin/koha-plack
sudo cp debian/scripts/koha-indexer /usr/sbin/koha-indexer
sudo cp debian/scripts/koha-sip /usr/sbin/koha-sip
sudo cp debian/scripts/koha-worker /usr/sbin/koha-worker
sudo cp debian/scripts/koha-z3950-responder /usr/sbin/koha-z3950-responder
sudo cp debian/scripts/koha-zebra /usr/sbin/koha-zebra
6. Repeat step 2
7. This time confirm that each service is restarted
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If I run a query like "SELECT NOW()" from a koha report, I will get a different answer than if I had run it from koha-mysql.
In Koha, we set the timezone for each database connection.
However, koha-mysql does not do this, so instead we are left using the default timezone of the database.
Test Plan:
1) Set your time zone to something other than the database time zone
2) run "SELECT NOW()" using debian/scripts/koha-mysql
*not* /usr/sbin/koha-mysql
3) Note you get the database timezone's current time
4) Apply this patch
5) Repeat step 2
6) Now you get the correct time!
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Minor improvment on display.
Solve the error message if the folder for uploaded temp files
doesn't exist.
Sponsored-by: Orex
Test plan:
- Apply the patch
- Try using koha-dump without any option
- Try using koha-dump with --uploaded_files
- Try using koha-dump with --uploaded_temp_files
- Try using koha-dump with both of the options above
Expected results: the .tar.gz dump will include uploaded and/or temporary
uploaded files if requested.
Change message and solve the error message if no temporary folder
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Orex
Test plan:
- Apply the patch
- Try using koha-dump without any option
- Try using koha-dump with --uploaded_files
- Try using koha-dump with --uploaded_temp_files
- Try using koha-dump with both of the options above
Expected results: the .tar.gz dump will include uploaded and/or temporary
uploaded files if requested.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 23250 we decided to generate a password without special chars
then add a '@' at the end to comply with MySQL policy.
That is wrong, we should handle correctly the special chars we don't
want to be part of the password.
Test plan:
1.
mysqlpwd=$(pwgen -s -y -r ":'&\\<>/" 16 1)
echo $mysqlpwd
Confirm that you don't see one of the following chars : ' & \ < > /
2.
Copy from src and edit /usr/sbin/koha-create to add an echo $mysqlpwd
Create several instances, like:
koha-create --create-db x
koha-create --create-db xx
koha-create --create-db xxx
...
When you see a password with a special chars, do:
koha-shell xxx
grep '<pass>' $KOHA_CONF
And make sure the password does not contain "__DB_PASS__"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Apply the patch
2. Restart services
3. Run koha-dump
4. Confirm the .sql.gz and .tar.gz files are generated successfully
Sponsored-by: Catalyst IT
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This is just theoretical, but by removing the second true you
could end the script on another error.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When restoring a Koha instance, and the database user does not exist, an error is shown,
although it is prevented from stopping the script by ` || true`. This patch removes the
` || true` guard, and rather uses `DROP USER IF EXISTS` which does exactly what one
would expect, without confusing error messages, whether the user existed or not.
To test:
1) Assume your Koha instance is called `asdf`.
1) Export the Koha instance using `koha-dump`.
2) Remove the instance completely using `koha-remove`.
3) Import it again using `koha-restore`.
4) No error should be shown, and the import should work. There was NO user to drop, therefore `DROP USER IF EXISTS` did nothing.
5) A database user called `koha_asdf` should exist, and have all privileges on the database of the same name.
6) Remove the instance again using `koha-remove`.
7) Now create a database user in MySQL called `koha_instance` where instance is the name of your dumped koha instance.
8) Import your koha instance again using `koha-restore`.
9) Again, no error should be shown, and the import should work. There WAS a user to drop, therefore `DROP USER IF EXISTS` dropped the user before creating a new one.
10) Again, a database user called `koha_asdf` should exist, and have all privileges on the database of the same name.
Sponsored-by: Reformational Study Centre
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Why require `job_`.. it's easiery to just use 'queue' and we have 'job'
from the context of the script we're calling. This also inproves
consistency between the debian commands and the script params.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds queue name handling in is_worker_running and a handy
method to centralize process name handling for queue-specific workers.
To test:
1. Apply this patch
2. Run:
$ source debian/scripts/koha-functions.sh
$ get_worker_name kohadev
kohadev-koha-worker
=> SUCCESS: Default queue means no queue name included
$ get_worker_name kohadev default
kohadev-koha-worker
=> SUCCESS: Default queue means no queue name included
$ get_worker_name kohadev long_tasks
kohadev-koha-worker-long_tasks
=> SUCCESS: Queue name appended to the name
4. Run:
$ perl misc4dev/cp_debian_files.pl \
--koha_dir /kohadevbox/koha \
--gitify /kohadevbox/gitify \
--instance kohadev
5. Run:
$ koha-worker --start --queue oleonard kohadev
=> SUCCESS: Starts!
6. Check:
$ ps waux | grep oleonard
=> SUCCESS: It is running
7. Play with --stop, --restart, --status and different queue names,
including 'default' and without the --queue param as well.
=> SUCCESS: All as expected!
8. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
As requested on comment99. Personally I do not feel that it
should be a requirement for adding a koha-conf entry though.
Note that koha-create does/did not even support adding multiple
line entries to koha-conf like we do here now.
But it might be a start for adding them?
Test plan:
The following tweak might help you to test without running the
complete koha-create, while still convincing you:
[1] cp debian/templates/koha-conf-site.xml.in /etc/koha/test.conf
[2] Add the following line in debian/scripts/koha-create. Append
if after the BCRYPT_SETTINGS= line on L652:
generate_config_file test.conf test.xml; exit
[3] Run debian/scripts/koha-create --keep-cookie A
[4] Check if you see <do_not_remove_cookie>A<..> in test.xml.
[5] Run debian/scripts/koha-create --keep-cookie A --keep-cookie B
[6] Check for two lines in test.xml
[7] Run debian/scripts/koha-create clone_name
[8] Check that the __KEEP_COOKIE__ line is gone in test.xml.
[9] Undo the tweak by removing test.xml and /etc/koha/test.conf,
and removing the added line from koha-create.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The line to use the --databases flag with mysqldump by default was accidentally
removed from koha-dump when the --schema-only option was added. This makes all
backups act as if koha-dump is called with the --without-db-name flag, causing
koha-restore to fail to restore the database because it's neither CREATEd or USEd.
This patch restores that line
To test:
1 - sudo debian/scripts/koha-dump kohadev
2 - zcat /var/spool/koha/kohadev/kohadev-2021-07-28.sql.gz | grep DATABASE
3 - Notice no output
4 - Apply patch
5 - sudo debian/scripts/koha-dump kohadev
6 - zcat /var/spool/koha/kohadev/kohadev-2021-07-28.sql.gz | grep DATABASE
7 - You get the line:
CREATE DATABASE /*!32312 IF NOT EXISTS*/ `koha_kohadev` /*!40100 DEFAULT CHARACTER SET latin1 */;
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
koha-indexer doesn't test INDEXER_PARAMS correctly which causes errors
to display when stopping/starting the daemon.
This patch fixes the test so that the variable is tested as a string,
so that no errors are created and the params are passed correctly.
Test plan:
0. Apply patch
1. vi /etc/default/koha-common
2. Add the following to the bottom of the file:
INDEXER_PARAMS="-daemon -sleep 6"
3. cp debian/scripts/koha-indexer /usr/sbin/koha-indexer
4. koha-indexer --stop kohadev
5. Note no errors
6. koha-indexer --start kohadev
7. Note no errors
8. ps -efww | grep "indexer"
9. Note that rebuild_zebra.pl has the arguments "-daemon -sleep 6"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
% koha-shell kohadev -c 'echo $PERL5LIB'
=> /kohadevbox/koha:/kohadevbox/koha/lib
% koha-shell kohadev
echo $PERL5LIB
=> /kohadevbox/koha:/kohadevbox/koha/lib:/kohadevbox/qa-test-tools
Note that this is not consistent but at least we have lib now in both
situations
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a "lib" directory to the source tree which gets
mapped to the same directory as "C4" and "Koha" for single and
standard installations.
CGI::Session::Serialize::yamlxs is put into this "lib" directory.
This patch also includes some changes so that dev/git installations
work as well.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes koha-create generate the log4perl.conf file for the
instance, belonging to the instance user. This is done in order to have
the z3950 responder work.
My original idea was to make the responder accept a '-g' parameter but
that is not supported by Net::Z3950::Responder. Also, as the library
insists on handling the PID file on its own, it wont' work to handle the
responsability to start-stop-daemon. The only solution I found was
making the fiel be owned by the instance user.
1. Create a Koha instance:
$ koha-create --create-db test
2. Initiate all the things
3. Enable and start the z3950 responder
$ koha-z3950-responder --enable test
$ koha-z3950-responder --start test
4. Try doing some search:
$ yaz-client localhost:2100
=> FAIL: you get:
Connecting...OK.
Sent initrequest.
Target closed connection
Z> quit
See you later, alligator.
=> FAIL: No warning or anything on the logs
5. Stop the daemon
$ koha-z3950-responder --stop test
6. Run it manually:
$ PERL5LIB=/usr/share/koha/lib KOHA_CONF=/etc/koha/sites/test/koha-conf.xml \
/usr/bin/perl /usr/share/koha/bin/z3950_responder.pl \
-c /etc/koha/sites/test/z3950 -u test-koha \
-p /var/run/koha/test/z3950-responder.pid -d test-koha-z3950
7. Repeat the 4, on a separate terminal (no daemon mode this time)
=> FAIL: You get:
Cannot open /etc/koha/sites/test/log4perl.conf (Permission denied) at /usr/share/perl5/Log/Log4perl/Config/BaseConfigurator.pm line 51.
8. Change the file owner:
$ chown test-koha /etc/koha/sites/test/log4perl.conf
9. Repeat 6, and 4
=> SUCCESS: It doesn't break anymore!
10. Apply this patch
11. Create a new instance, with the patched koha-create:
$ debian/scripts/koha-create --create-db test1
12: Check the generated files permissions:
$ ls -l /etc/koha/sites/test2
=> SUCCESS: You get:
-rw-r----- 1 root test2-koha 19720 May 17 13:26 koha-conf.xml
-rw-r----- 1 test2-koha test2-koha 2825 May 17 13:26 log4perl.conf
-rw-r----- 1 root test2-koha 2014 May 17 13:26 zebra-authorities-dom.cfg
-rw-r----- 1 root test2-koha 2279 May 17 13:26 zebra-biblios-dom.cfg
-rw-r----- 1 root test2-koha 26 May 17 13:26 zebra.passwd
13. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the following option switches to koha-create:
--mb-host
--mb-port
--mb-user
--mb-pass
--mb-vhost
They are used to override the default values on instance creation.
To test:
1. Play with the several option switches and verify that the resulting
koha-conf.xml contains the expected data.
=> SUCCESS: It works as expected
2. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new --schema-only optoin to the koha-dump script.
This can be used to generate a new kohastructure.sql file during the release, and later to
compare the DB structure of a koha instance to the kohastructure.sql file shipped with a version
to identify any missing constraints or other db structure issues
To test:
1 - debian/scripts/koha-dump kohadev
2 - Confirm db and configs are dumped correctly
3 - Apply patch
4 - debian/scripts/koha-dump --help
5 - Confirm new option is listed and makes sense
6 - debian/scripts/koha-dump --schema-only kohadev
7 - Confirm only schema is dumped and is not zipped
8 - debian/scripts/koha-dump kohadev
9 - Confirm entire db is dumped as before
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch sets the group and group read permissions on
configuration backups, so that they can be downloaded
via the web staff interface.
Test plan:
0. Apply the patch
1. cp debian/scripts/koha-dump /usr/sbin/koha-dump
2. koha-run-backups --days 2 --output /var/spool/koha
3. Note *.tar.gz backups in /var/spool/koha/kohadev
now have root:kohadev-koha ownership and 640 permissions
4. vi /etc/koha/sites/kohadev/koha-conf.xml
5. Set backup_db_via_tools and backup_conf_via_tools to 1
6. echo 'flush_all' | nc -q 1 memcached 1121
7. koha-plack --restart kohadev
8. Go to http://localhost:8081/cgi-bin/koha/tools/export.pl
9. Click on "Export configuration"
10. Choose a file
11. Click Download configuration
12. Note that *.tar.gz file downloaded correctly
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a trivial switch so koha-run-backups can pass the
--exclude-indexes option switch to koha-dump. This way if the sysadmin
doesn't want to backup the Zebra indexes, it can be controlled by
tweaking the cron definition.
To test:
1. Apply this patch
2. Run:
$ debian/scripts/koha-run-backups --days 2 --output /var/spool/koha
3. Notice the size of the backups:
$ ls -lh /var/spool/koha/kohadev
4. Try the new option switch:
$ debian/scripts/koha-run-backups \
--exclude-indexes \
--days 2 --output /var/spool/koha
5. Repeat 3
=> SUCCESS: Backups are smaller!
6. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: fix --exclude_indexes vs --exclude-indexes in koha-run-backups.xml
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an entry to koha-conf.xml for setting a default SMTP
server config. 'koha-create' gets option switches for all options.
To test:
1. Use the tweaked script to crete a new instance
2. Notice it contains entries for smtp_server and they respect your
options.
3. If you don't choose any option, it sets the current default.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The "--commit" or "-c" parameter was incorrectly not used if it was
passed to the koha-elasticsearch program.
To test:
1) Before patch notice koha-elasticsearch --rebuild --commit 1 -v <instance>
only commits every 5000 records
2) Apply patch and notice the above command commits every 1 record
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently, if a koha-plack is given multiple instances, it will create
duplicate $KOHA_HOME/installer and $KOHA_HOME/installer/lib entries
in PERL5LIB as these changes are done at the global rather than local level.
This issue can only be seen in non-dev Koha, since dev Koha installs
rewrite PERL5LIB.
This patch localizes PERL5LIB to each instance.
To test dev installs:
0. cp debian/scripts/koha-plack /usr/sbin/koha-plack
1. koha-plack --restart kohadev
2. Note that nothing breaks
To test non-dev installs:
0. Don't replace /usr/sbin/koha-plack yet
1. Create multiple non-dev installs with plack enabled and running
2. Set up one of these non-dev installs so you can use the web
UI (that is beyong the scope of this test plan)
3. koha-plack --restart test1 test2 test3
4. For test3, go to /cgi-bin/koha/about.pl
5. Note that there are duplicate /usr/share/koha/installer
and /usr/share/koha/lib/installer entries in PERL5LIB
6. cp debian/scripts/koha-plack /usr/sbin/koha-plack
7. koha-plack --restart test1 test2 test3
8. For test3, go to /cgi-bin/koha/about.pl
9. Note that there are no duplicates entries in PERL5LIB
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This raises the debug level a lot, it it a bit overwhelming, but may be useful in debugging indexing issues
To test:
1 - Apply patches
2 - sudo koha-indexer --stop instance
3 - sudo debian/scripts/koha-indexer --start --debug instance
4 - tail -f /var/log/koha/instance/indexer-output.log
5 - Note you get a listing that nothign in the queue
6 - Go to staff client and make a change to a record
7 - Note the logs have tons of info
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After bug 25538, after a koha-shell we are not longer in the current directory:
root@cec7bffd8100:koha(master)$ pwd
/kohadevbox/koha
root@cec7bffd8100:koha(master)$ sudo koha-shell kohadev
kohadev-koha@cec7bffd8100:~$ pwd
/var/lib/koha/kohadev
Test plan:
Repeat the commands above and confirm that with this version of the
script you get /kohadevbox/koha inside the koha-shell
Search for possible regressions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By putting koha-shell in an if statement, "set -e" will no longer
cause the entire koha-foreach program to exit, if koha-shell
returns a non-zero status.
If a non-zero status is returned, we warn on it, and the caller
of koha-foreach can interpret that command visually.
To Test:
1) Write a shell script that says "Hello" and then exits with a 1
status
2) Run koha-foreach against that shell script with multiple instances
available to koha-foreach
3) Before the patch, koha-foreach will die after the first "Hello"
4) After the patch, koha-foreach will continue, through all the
instances, and report which instances returned non-zero statuses
by which command.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See man sudo, -i parameter.
Should we expect regressions?
Test plan:
0. Use D11 or U18.
Don't apply this patch
1.
$ echo $KOHA_INTRANET_URL
$ sudo koha-shell kohadev
$ echo $KOHA_INTRANET_URL
2. Apply this patch
$ cp debian/scripts/koha-shell /usr/sbin/koha-shell
3. Repeat 1.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
root@koha-debian9:/# koha-z3950-responder --start d9
[....] Starting Z39.50/SRU daemon for d9:Can't open perl script "/usr/share/koha/bin/z3950_responder.pl/z3950_responder.pl": Not a directory
failed!
Test plan:
On a dev install, copy the debian script and run it
Same on a package install
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
root@koha-debian10:~# koha-translate --install es-ES
/bin/bash: /usr/share/koha/misc/bin/clear_cache.pl: No such file or directory
The script is in /usr/share/koha/bin/clear_cache.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To prevent Apache to create intranet-error.log and opac-error.log with
root permission we chown them after it has been restarted (and so
created them) when a new Koha instance is created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Since D10, the behaviour of start-stop-daemon changed, see from its
manual:
"""
Warning: using this match option with a world-writable pidfile or using it alone with a daemon that writes the pidfile as an unprivileged (non-root) user will be refused with an error (since
version 1.19.3) as this is a security risk, because either any user can write to it, or if the daemon gets compromised, the contents of the pidfile cannot be trusted, and then a privileged
runner (such as an init script executed as root) would end up acting on any system process. Using /dev/null is exempt from these checks.
"""
Test plan:
koha-plack --restart kohadev
should success with this patch.
Without this patch you get:
start-stop-daemon: matching only on non-root pidfile /var/run/koha/kohadev/plack.pid is insecure
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When searching if some apache mod are enable we are hiding the error (2> /dev/null) and display an error about the (guessed) missing module.
It can lead to wrong tracks, let display the original apache error if there is one.
This is linked with https://gitlab.com/koha-community/koha-testing-docker/-/merge_requests/119
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
According to the list of two-letter language codes found in ISO 639-1
(https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes), the correct
Zebra language option for Greek should be 'el', not 'gr'.
This patch fixes that.
Test plan:
0) Apply the patch.
1) Confirm that 'gr' has been changed to 'el' in all relevant files.
2) Create a new Koha instance using `koha-create --zebralang el testinst1`.
3) Edit /etc/koha/koha-sites.conf and set ZEBRA_LANGUAGE to 'el'. Then,
create another Koha instance with `koha-create testinst2`.
4) Confirm that both instances created in steps 2) and 3) have picked up
the Zebra CHR file from the /etc/koha/zebradb/lang_defs/el/ directory.
This is done by inspecting the value of 'profilePath' in these files:
/etc/koha/sites/testinst{1,2}/zebra-authorities-dom.cfg
/etc/koha/sites/testinst{1,2}/zebra-biblios-dom.cfg
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as previous test, but use the script to run the reindex
reset_all to update the scripts or use
misc4dev/cp_debian_files.pl
sudo koha-elasticsearch --rebuild -r -v
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When languages are added or removed when need to flush the caches to
keep the interface consistent
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
