Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Misspelled variable causes _get_outstanding_holds to crash
if patron is queued on biblio level
Caused by
commit 62a075987a
Bug 21184: Replace C4::Items::GetBarcodeFromItemnumber calls
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Set up your SIP: https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
2) Run:
misc/sip_cli_emulator.pl -a localhost -p 6001 -su <login> -sp <passsword> -l <library_code> --patron <borrowernumber> -s "Y " -m patron_information
the -s parameter says what kind of additional information you want to see
3) Check the response: if the requested patron has waiting hold, there
is field "AS" with the barcode of waiting item
The right response looks like this:
64 00120180817
052434000100000000000000000000AOCPL|AA1|AEKoha Admin|BLY|CC5|AS39999000004410|PCS|PIY|AFGreetings from Koha. |
More reading ;)
http://multimedia.3m.com/mws/media/355361O/sip2-protocol.pdf
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
No need to check the pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Many services use SIP patron req info to validate a patron against
the koha database. If recording lastseen sites will
also want to record that the user has accessed these
library facilities although they have not logged into koha
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that Patron Info request (63) updates lastseen when the pref has
been enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sounds like we do not need related fields or 'overdue' flag here.
No idea how to confirm there is no regression here.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we are, patronflags is used in a couple of places where (almost) all flags
were really useful: C4::SIP::ILS::Patron->new and circulation.pl
This patch only deal with the circulation code as I am not convident
enough with SIP code.
The change does not seems trivial because of the complexity of the
existing code, but the logic is the same. We send a variable to the
template depending on the situation of the patron.
I guess only code eyes ball could catch issue in this patch quickly.
Maybe we need to find a good place in a Koha module to move this code
and provide code coverage (especially when C4::SIP::ILS::Patron will
reuse it).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries need to be able to send additional patron data from the
extended patron attributes in made up SIP2 fields for the patron
information and patron status responses.
Test Plan:
1) Apply this patch
2) Create 3 new patron attributes with the codes CODE1, CODE2, CODE3.
Make a least one repeatable.
3) Create a patron, add those attibutes for the patron, make sure there
are at least two instances of the repeatable code
4) Edit your SIP2 config file, add the following within the login stanza:
<patron_attribute field="XX" code="CODE1" />
<patron_attribute field="XY" code="CODE2" />
<patron_attribute field="XZ" code="CODE3" />
5) Using the sip cli emulator, run patron_information and
patron_status_request messages for the patron
6) Note the values you set for the patron attributes are sent in the
corrosponding fields!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Mauchley <dmauchley@duchesne.utah.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: added parentheses on line 488 when assigning hashref to array.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces "or" with "||" in variable assignment
second attempt to retrieve borrower was not being executed due
to changed precedence
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The GetMemberAccountRecords may be a perf killer, it retrieves all the
account lines of a patron and then the related item and biblio
information.
Most of the time we only want to know how much the patron owns to the
library (sum of amountoutstanding). We already have this information in
Koha::Patron->account->balance.
This patch replaces the occurrences of this subroutine by fetching only
the information we need, either the balance, the detail, or both.
It removes the formatting done in the module, to use the TT plugin
'Price' instead.
There is a very weird and error-prone behavior/feature in
GetMemberAccountBalance (FIXME): as the accountlines.accounttype is a
varchar(5), the value of the authorised value used for the
ManInvInNoissuesCharge pref (category MANUAL_INV) is truncated to the 5
first characters. That could lead to unexpected behaviors.
On the way, this patchset also replace the GetMemberAccountBalance
subroutine, which returns the balance, the non issues charges and the
other charges. We only need to have the balance and the non issues
charges to calcul the third one.
Test plan:
Add several fees for a patron and play with HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge.
The information (biblio and item info, as well as the account line) must
be correctly displayed on the different screens: 'Fines' module, fine
slips, circulation module
Note that this patchset could introduce regression on price formatting,
but will be easy to fix using the TT plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'OverduesBlockCirc' to block
2 - Find or create a patron with overdues
3 - Perform a SIP patron lookup on that patron
misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su term1 -sp term1 -l CPL
--patron {userid or cardnumber} --password {pass} -m patron_information
4 - Note the first character of response is a ' '
5 - Apply patch
6 - Restart memcached, apache, and plack
7 - Perform SIP patron lookup
8 - Note the first character of response is 'Y'
9 - prove t/db_dependent/SIP/Patron.t
10 - Test should return green
Signed-off-by: Chris Kirby <chris.kirby@ilsleypubliclibrary.org>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha's SIP2 server sends the patron's name in the format "Firstname
Surname" which is not very good for machine reading. We need to allow
the format of the patron name to be customized in a manner similar to
what is done with the DA field on bug 16755.
Test Plan:
1) Apply this patch, start or restart your SIP server
2) Find a patron with a first and last name
3) Send a patron information request via the sip2 cli tool
4) Note the AE field has the format "<firstname> <surname>" ( i.e. the current behavior )
5) Add this parameter to the login stanza you are using:
ae_field_template="[% patron.surname %][% IF patron.firstname %], [% patron.firstname %][% END %]"
6) Restart your SIP server
7) Repeat step 3
8) Note the AE field now has the format "<surname>, <firstname>"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Benjamin Daeuber <BDaeuber@cityoffargo.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14507 introduced the use of checkpw in C4::SIP::ILS::Patron so that
non-Koha internal authentication processes would be able to function via
SIP ( LDAP et al ).
The problem is that checkpw changes the userenv to that of the patron!
This is not usually an issue in Koha because most of the time that
patron running through checkpw is the one to be logged in.
Aside from SIP2 the only other area where this may be an issue is in SCO
when using SelfCheckoutByLogin.
Test Plan:
1) On master, check out an item to a patron via SIP2
2) Note the checkout lists the item as having been checked out
from the patron's home library not matter which library is was
supposed to be checked out from.
3) Apply this patch
4) Re-checkout the item
5) The item should now be checked out as if it was checked out from
the library as defined in the SIP configuration file.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Previous to bug 14507, SIP2 only did internal authentication. A change
to the way we check empty passwords has caused any empty password to
send back a CQ of Y. Previous to that patch set, a CQ of Y would only be
sent back of the patron password column was NULL. Now, an empty AD field
*always* returns a CQ of Y.
Test Plan:
1) Send a patron information request with an empty AD field
Note: You must send the AD field or you won't get back a CQ field
2) Note you get back a CQ of Y
3) Apply this patch
4) Repeat step 1
5) Note you now get back a CQ of N
Signed-off-by: Trent Roby <troby@bclib.info>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Koha's SIP2 server should have support for the AV field ( field items ).
The biggest problem with this field is that its' contents are not really
defined in SIP2 protocol specification. All it says is "this field
should be sent for each fine item". Due to this, I think the contents of
the field need to be configurable at the login level, so that the
contents can be defined based on the SIP2 devices requirements for the
AV field.
Test Plan:
1) Apply this patch
2) Find a patron with outstanding fines
3) Run a patron information request using misc/sip_cli_emulator.pl using the new -s option with the value " Y "
4) Note there is an AV field for each fee containing the description and amount
5) Edit your sip config, add an av_field_template parameter to the login you are using such as
av_field_template="TEST [% accountline.description %] [% accountline.amountoutstanding | format('%.2f') %]"
6) Restart your SIP server
7) Repeat the patron information request
8) Note your custom AV field is being used!
Signed-off-by: Chris Davis <cgdavis@uintah.utah.gov>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Some devices are using patron information responses to validate
patron passwords to govern access to facilities as we
were using C4::Auth::checkpw_hash this only worked in a db password
context not other authentication routines.
The C4::Auth routines are not very consistent and there isnt a dropin
replacement for checkpw_hash this calls checkpw instead.
In a password only environment this behaves as the old version did
returning field CQ as Y if a valid password or no password is passed in
the patron info request and N if an incorrect password is supplied
It should also test against the appropriate authentication sources if
othere autrhentication schemes are in use
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested this with a client who reports that this enables SIP authentication to work correctly with their LDAP server.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
For historical reasons the SIPServer and SIP modules
have used an extra module path in addition to the
standard Koha one. This has caused numerous irritants
in attempting to set up scripts and basic tests. It
does not help in attempting to modify or debug
this code
This patch changes the package value in the modules
under the C4/SIP directory and makes calls to
them use the full package name.
Where the export mechanism was being short circuited
routines have been explicitly exported and imported
declarations of 'use ILS' when that module was
not being used and which only generated warnings
have been removed.
As a lot of the changes affect lines where
an object is instantiated with new. The opportunity
has been taken to replace the ambiguous indirect
syntax with the preferred direct call
In intializing ILS the full path is added as this
will not require any changes to existing configs.
I suspect this feature is unused, and adds
obfuscation rather than flexibility but have kept
the feature as we need this change in order to
rationalize and extend the testing of the server.
The visible difference is that with the normal Koha
PERL5LIB setting. Compilation of Modules under C4/SIP
should be successful and not fail with unlocated modules,
allowing developers to see any perl warnings
All the SIP modules can now be run through the tests
in t/00-load.t now except for SIPServer itself
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the patron has amassed charges that block borrowing, but we
allow staff override the information that the patron cannot
issue should be included the patron information response
This patch sets the appropriate status fields in the patron object
It restores the fee_limit member to the patron object
and calls a local subroutine to set it.
This could be done more elegantly but that would require more
major refactoring of the rather messy initializer code
in ILS::Patron
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patron has a record-level hold that is unavailable, any patron
information request will send back an empty CD field when this field
should have an item barcode in it [RM note: this actually isn't
universally true -- the SIP2 standard is silent as to what is supposed
to go in the CD field. Some SIP2 devices do indeed want an item
barcode, but others are known to just want a display of the title
and author of the request in question. Providing an option is the
topic of a new enhancement request, however.]
This is due to a minor error in ILS::Patron::_get_outstanding_holds
where GetItemnumbersForBiblio is assumed to return an array but in
reality returns an arrayref.
Test Plan:
1) Create a record level hold for a patron and record
2) Using SIP2, make a patron information request
3) Note the empty CD fields
4) Apply this patch, restart SIP server
5) Repeat step 2
6) Note the CD field now has a barcode
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test this patch but the following code shows me it is correct:
use C4::Items;
use Data::Dumper;
my $biblionumber = 5035;
my $itemnumber = (GetItemnumbersForBiblio($biblionumber))[0];
say Dumper $itemnumber;
$itemnumber = (GetItemnumbersForBiblio($biblionumber))->[0];
say Dumper $itemnumber;
displays:
$VAR1 = [
'23168',
'23169',
'23170',
'23171',
'23172'
];
$VAR1 = '23168';
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The system preference 'maxoutstanding' is defined as the maximum amount
of fees owed by the patron before Koha should block placing holds (
terrible naming on this one ).
However, although the Koha OPAC respects this preference, placing holds
via a SIP2 device will not.
Test Plan:
1) Set maxoutstanding to $10
2) Pick a patron owning more than $10 in fees
3) Attempt to place a hold for this patron from a SIP2 device
This attempt should succeed
4) Apply this patch
5) Restart your SIP2 server
6) Attempt to place a hold for this patron from a SIP2 device again
This attempt should now fail
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
* SIP: Have an old user and create a new user
- use either tenet sip test or
C4/SIP/interactive_patron_check_password.pl to check old
userid/password
- do the same for the new user
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Test
1) using perl C4/SIP/interactive_patron_check_password.pl
can check current (short) and new (long) passwords
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When requested by the summary flags the sipserver
should return in the patron info response barcodes of
the relevant titles.
For available holds this is the barcode of the captured items.
For unavailable holds ( i.e. current unsatisfied holds ),
we need to send a barcode so that the unit can use this to
request the title info. The barcode could be any one
belonging to the title.
This patch also corrects the erroneous return of empty items
in the patron information response. If the unit supplies a
range 1 - 100 unless the title has a hundred or more copies the
unit expects all copies. The server was erroneously stuffing
the returned arrays with null copies so that all summary requests
returned 100 copies (mainly without barcodes)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
Using the test script provided on the bug report, but changed it
to match sip user and patron existing in my database.
Before applying the patch the SIP responses show the behaviour
pointed out above regarding the 100 items. After applying the
patch and restarting the SIP server responses are much more clean
not returning empty IDs.
64 Patron information response
AS = hold items
hold items count is correct.
AS contains barcodes of waiting holds.
Before patch, all AS were empty.
AT = overdue items
overdue items count is correct.
AT contains barcodes of overdue items.
AU = charged items
charged items count is correct.
AU contains barcodes of charged items.
AV = fine items
Judging from behaviour seen and comment in
Patrons.pm currently not implemented.
BU = recall items
Recalls are not implemented in Koha yet.
CD = unavailable hold items
unavailable items count is correct.
CD contains barcode for item level holds and is empty
for title level holds where no item can be determined.
Before patch, all CD were empty.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The debarred status in DB switched from a boolean to a date.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Correctly pulls debared flag instead of debarment date.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Expansion of Liz Rea's original patch
Bug report specifically mentioned lack of the
Zip/Postal code but all used address fields should
be included. Moved the address
generation to its own sub.
Hopefully using an if else will read more clearly than
the original ternary operator proved to be
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
All the modules in the SIP/ILS tree are objects
The addition of calls to Exporter or hand manipulation of
@ISA added unnecessary bloat
Removed the "self = shift or return" idiom as it is nonsensical
if the method can only be called via an object.
standardized inheritance via use parent
added a $self = shift in a couple of places where it
was not strictly necessary as its absence seemed to have
misled readers in the past
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add C4/SIP to perlcritic tests. Fix those issues that were
generating perlcritic errors
Signed-off-by: Stacey Walker <stacey@catalyst-eu.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Corrects typo in list of flags; was DEBARRED, but the actual name of the flag is
DBARRED (for some reason)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Using Flag EXPIRED to notice whether Patron CAN or CANNOT checkout a book
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This update the way Member is added and editing so that import and Edition
could be best automatized
GetMember evolves and allow ppl to serach on a hash of data
Adding SQLHelper A new package to deal with INSERT UPDATE and SELECT
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
