In Koha, any report that uses C4::Reports::Guided will be limited to 999,999 rows. This is causing problems for larger libraries where some reports may have over a million results.
Test Plan:
1) Create a report "SELECT * FROM borrowers" and run it, note the number
of results
2) Apply this patch
3) Add the line `<report_results_limit>3</report_results_limit>`
within the <config> block of your koha-conf.xml
4) Restart all the things!
5) Run the report, download the results as a CSV
6) Note your CSV only has 4 lines, the header and 3 patrons
Signed-off-by: Rachael Laritz <rachael.laritz@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This subroutine was mostly the same as GetColumnDefs, we replace it
identically as in the previous patch.
Test plan:
Translate some strings in another language
% gulp po:update --lang es-ES
% cd misc/translate
# Translate the relevant strings in po/es-ES-messages.po
# For instance "Alternate contact: Surname"
% perl translate install es-ES
Select the language for the interface (enable it in the 'language' syspref
first)
Create a new guided report and confirm that the columns for the borrowers
table are translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In C4/Reports/Guided.pm update_sql() called by test suite return warn :
Use of uninitialized value $sql in substitution (s///)
Test plan :
Run prove t/db_dependent/Reports/Guided.t and see warning disapearing
(whouchhhh)
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This problem appeared because of this commit:
Bug 14435 Add the ability to store result's report
cf90317112
This patch fixes it by removing the third $date that wasn't removed
back then.
To reproduce:
1) Head over to Reports page.
2) Search for report by date. It should cause 500 error.
3) Apply the patch.
4) Repeat the search again, it should be working now.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When trying to figure out which saved SQL report caused too much load,
it's useful to have the report id show in the mysql process list.
This patch adds the saved SQL ID number as a comment line in front
of the SQL before passing it to the database.
To test:
1) Run a saved report that takes long enough time, so you can:
2) Connect to the database with your preferred client, and use
"show processlist;" to list all the running mysql processes.
3) The running saved SQL report should show up with
"-- saved_sql.id=123" in the process info field.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
'Insert runtime parameter' has now more options for the SQL reports : 'cash register', 'debit types' and 'credit types'
Test plan:
1)Home > Reports > Create from SQL
2)Click on 'Insert runtime parameter' and notice the current options
3)Apply patch and repeat 2)
4)New parameters are now available
5)A simple SQL request to try 'credit_types' option : SELECT * FROM account_credit_types WHERE code = <<Credit types|credit_types>>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=29796
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1) Create a new notice, for example with Koha module "Patrons",
name/code TEST and message body "<strong>testing<strong>".
2) Create a new sql report, the query could be someting like:
SELECT "<number>" as `borrowernumber`, "to@example.com", as `email`, "from@example.com" as `from`;
where "<number>" is a valid borrowernumber.
3) Run patron_emailer.pl --report=<id> --notice=TEST --module=members -commit
where <id> is the report id.
4) Check the message_queue table that the content_type column has been
set to text/html; charset="UTF-8".
5) Ideally process the message queue and veriy that the sent email is displayed
as rendered html.
6) Run tests in t/db_dependent/Reports/Guided.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The saved SQL report code validates the SQL in multiple places:
when saving, when updating, and when executing the query.
Move the validation code into Koha::Reports, and write tests for it.
Test plan:
1) Apply patch
2) Create a new valid SQL report, save it (success)
3) Create a new illegal SQL report, try to save (fails)
4) Update already saved SQL report by adding one of
the forbidden words, eg. delete or drop (saving will fail)
5) Edit a save_sql in the database, changing it to eg.
"drop borrowers", and try to execute it (fails)
6) Prove t/db_dependent/Koha/Reports.t
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no qa errors.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24695: (QA follow-up) Fix number of tests
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TODO: Need to address the svc endpoints
To test:
1 - Create a 'New SQL report' like:
SELECT * FROM items WHERE itemnumber IN <<Itemnumbers|list>>
2 - Run the report
3 - You should have a text area where you can enter various itemnumbers
4 - Enter some valid and invalid itemnumbers
5 - You get the info for the valid itemnumbers, no error for the others
6 - Test adding other params to the report and ensure things still work as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Otherwise the tests will fail. We will certainly log twice the error
when run from the UI, but not a big deal. This definitely needs more
attention in a follow-up bug report.
We want to raise proper exceptions here.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In order to get the default value defined at DBMS level, we use
Koha::Reports (to inherit from Koha::Object->store) from the 2 add/edit
methods of C4::Reports::Guided.
A second step would be to remove completely those CRUD subroutines and
use directly Koha::Reports instead.
Test plan:
1. Add and edit some reports
2. Disable memcached, create a report, edit it
=> Should not crash
3. Make sure the tests make sense and that they pass after the second
patch.
The error was:
DBD::mysql::db do failed: Column 'cache_expiry' cannot be null [for
Statement "UPDATE saved_sql SET savedsql = ?, last_modified = now(),
report_name = ?, report_group = ?, report_subgroup = ?, notes = ?,
cache_expiry = ?, public = ? WHERE id = ? "] at
/kohadevbox/koha/C4/Reports/Guided.pm line 633.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Create a report
SELECT borrowernumber, firstname, surname, email, emailpro FROM borrowers WHERE surname='acosta'
2 - Create or edit patron with surname acosta to have a separate email and emailpro
3 - perl misc/cronjobs/patron_emailer --notice HOLDS --module reserves --verbose --email emailpro --report ## --from 'me@you.us'
4 - Note email is used, not email pro
5 - Apply patch
6 - Repeat, correct eamil is used
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set or have two patrons with emails - note thier borrowernumber for the report
2 - Create a report - note the report id ($REPORT_ID)
SELECT borrowernumber, surname, firstname, email FROM borrowers WHERE borrowernumber IN (##,##);
3 - Create a notice in circulation with code TESTEMAIL
4 - The content should be "[% surname %]"
5 - perl misc/cronjobs/patron_emailer.pl --report $REPORT_ID --notice TESTEMAIL --module circulation --from anyone@anywhere.com --verbose
6 - Note that the emails both have the same surname
7 - Apply patch
8 - Repeat 5
9 - Emails now have correct content
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Jessica Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
# Failed test 'nb_rows returns 0 on bad queries'
# at t/db_dependent/Reports/Guided.t line 441.
# got: undef
# expected: '0'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Caused by
commit bca4453c50
Bug 23624: (QA follow-up) Optimize even more
A report like:
SELECT * FROM issues JOIN borrowers USING (borrowernumber)
will have two borrowernumber columns - SQL will give us there rsults,
but if we try to wrap them in a SELECT COUNT(*) FROM (report) it throws
a duplicated column error.
This patch suggests to execute the query the old way if the derived
table optimization failed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch optionally adds an 'all' option to report dropdowns
Note you will need to use 'LIKE' instead of '=' to allow 'All' to work
To test:
1 - Write a report:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches>>
2 - Run it
3 - Select a branch
4 - You get one branch info
5 - Note you cannot select all
6 - Apply patch
7 - Run report
8 - No change
9 - Update report like:
SELECT branchname FROM branches WHERE branchcode LIKE <<Branch|branches:all>>
10 - Run report
11 - Select 'All'
12 - You get all branches
13 - Select one branch
14 - You get one branch
15 - Test with other authorised categories (itemtypes, YES_NO, etc.)
16 - Confirm it works as expected
17 - Prove -v t/db_dependent/Reports/Guided.t
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch makes counting the results have no memory footprint by
leveraging on the DB to count the rows.
To test:
- Without this path, run:
$ kshell
k$ prove t/db_dependent/Reports/Guided.t
=> SUCCESS: Tests pass
- Apply this patch
- Run:
k$ prove t/db_dependent/Reports/Guided.t
=> SUCCESS: Tests still pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
C4::Reports::Guided::nb_rows (called by get_prepped_report in reports/guided_reports.pl) uses DBI::fetchall_arrayref to retrieve all rows at once; counts them; and then discards the rows and returns the count. This has the potential, if the number of rows is very large, to exhaust all available memory.
(Other code in guided_reports.pl has the same potential effect, but because the solution to that is much less straightforward it will be addressed in a separate bug report.)
This patch uses the second ($max_rows) parameter to DBI::fetchall_arrayref to retrieve a smaller number (1,000) of rows at a time, looping until all results have been retrieved. This will only use as much memory as the maximum amount used by a single call to DBI::fetchall_arrayref.
Test Plan:
1) Create a report the will generate a huge number of results
2) Run the report, watch your memory usage spike
3) Apply this patch
4) Restart all the things!
5) Run the report again, note your memory usage is much lower
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the moment every time you run runreport.pl with the --store-results
option another line will appear for your report in the saved
reports table. This is not a data, but a display problem as the
report is still only stored once.
1) Create a report and note the report number
2) Run from command line (replace X by report number) :
misc/cronjobs/runreport.pl X --format=csv --csv-header --store-results
3) Go to saved reports table
4) Look at the table, each run of the cronjob will create a new row
in the table instead of just updating the saved results column.
5) Apply patch
6) Veriy the table displays correctly again and there are no regressions
QA: Run t/db_dependent/Reports/Guided.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Ths patch add an EmailReport function to C4::Reports::Guided
It accepts a notice (module, code, branch) and a report and attempts to
email notices to patron, generating content using report content.
Notice must be in template toolkit syntax, only columns in report are
available for notice.
To test:
1 - Specify various options
2 - Ensure errors are returned if options are incomplete or incorrect
3 - Pass a report containing 'from' and 'email' and 'borrowernumber'
columns and ensure message queue populated as expected
Signed-off-by: Jessica Ofsa <jofsa@vt.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Includes:
* code factorization
Some code from subscription & Mana-KB has been factorized in order to speed-up next developments
* SytemPreferences:
Mana Activation:
- add a value "no, let me think about it", that is the default value.
- as long as this value is selected, messages ask if user want to activate it ( in Administration and Add-subscription(page 2) )
AutoShareWithMana
- Add the syspref AutoShareWithMana: user can automatically share infos with Mana-KB (not set by default)
* Interface :
- On mana-search, rows are now sorted by date of last import, then by number of users
- Windows redesigned to improve the user experience
* New Feature : report a mistake.
- people can now report an invalid data (wrong, obsolete,...)
- if a data is reported as invalid many time, it will appear differently
- Added few tooltip (to explain the fields last import, nb of users, to explain the new feature)
- When reporting a data as invalid, a comment can also be added. Koha will then display comments related to data in result lists
* API (svc/mana)
- add svc/mana/addvaluetofield: allows to ask mana incrementing a field of a resource
- no hardcoding for resources in the code of api (api needs to be called with a ressourcename)
* New feature : SQL report sharing
- Create Koha::Report.pm and Koha::Reports.pm, objects class for Reports
- New feature: share reports with Mana-KB
- New feature: search report in Mana-KB with keywords
- New feature: load reports from Mana-KB
Test plan:
1 - Apply Patch + update database
2 - Copy the three lines about mana config in etc/koha-conf.xml in ../etc/koha-conf.xml (after <backupdir> for example)
<!-- URL of the mana KB server -->
<!-- alternative value http://mana-test.koha-community.org to query the test server -->
<mana_config>https://mana-kb.koha-community.org</mana_config>
3 - Check Mana syspref and AutoShareWithMana syspref are not activated
4 - Search the syspref ManaToken and follow the instructions
5 - subscriptions
- Try create a new subscription for a first serial => Mana-KB shouldn't show you anything (except if the base hase been filled)
- Share this serial with Mana-KB (on the serial individual's page there must be a Share button)
- Try to create a new subscription for serial nr1 => a message should appear when you click on "next", click on "use", the fields should automaticaly appear
- Activate AutoShareWithMana => Subscriptions
- Create a new subscription for a second serial
- There shouldn't be any Share button
- Create a second subscription => the message should appear, click again on use
6 - SQL Report
- Create a new SQL report, without notes.
- On the table with all report (reports > use saved), there should be the action "Share"
- If you click on share, you have an error message
- Create a new report, with a title and notes longer than 20 characters
- You can share it with mana => you will have a success message
- On (report > use saved), there must be a message inviting you to search on Mana-KB for more results, enter a few word from title, notes, type of the report you shared, it should appear. You can use it, it will load it into your report list.
7 - Report mistakes.
- On any table containing Mana-KB search results, you can report a mistake and add a comment.
8 - For each previous test, try to send wrong data, to delete the security token, to send nothing: it should show a correct warning message.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com> (2018-07-04)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove t/db_dependent/Reports/Guided.t
2 - grep "get_saved_report" - ensure there are no occurences of the
singular form
3 - create, save, edit, and convert a report
4 - access a public report and report json from opac and staff client
5 - Ensure all function as expected
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
git grep "Create Compound Report"
-- only one file
git grep compound | grep 1
-- this is the only setting of the compound tt variable
less koha-tmpl/intranet-tmpl/prog/en/modules/reports/guided_reports_start.tt
-- There is an TT IF statement for compound.
-- In that statement it would trigger 'Save Compound'
git grep save_compound
-- only the template and the guided report perl
git grep create_compound
-- only triggered by the save code in the guided report perl
-- in the export for the C4/Reports/Guided.pm
git grep run_compound
-- left over in export
apply the patch
look around and see the pieces are cleaned up.
run koha qa test tools
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 17898 provides a way of converting reports that use biblioitems.marcxml so that they will use biblio_metadata.metadata instead.
This only works with reports that do not refer to other columns in the biblioitems table. This is a known limitation. It means that we should be able to do a substitution of every occurrence of biblioitems with biblio_metadata, and every occurrence of marcxml with metadata.
Unfortunately, we're not doing a global replace, we're only replacing the first occurrence.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Reports/Guided.t
All tests successful.
Files=1, Tests=9, 10 wallclock secs ( 0.11 usr 0.01 sys + 2.85 cusr 0.25 csys = 3.22 CPU)
Result: PASS
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 17196 move the marcxml out of the biblioitems table.
That will break SQL reports using it.
It would be handy to propose an automagically way to convert the SQL
reports.
We do not want to update the reports automatically without user inputs,
it will be too hasardous.
However we can lead the user to convert them.
In this patchset I suggest to warn the user if a report is subject to be
updated.
TODO: Add a way to mark this job done (using a pref?) to remove the
check and not to display false positives.
Test plan:
- Create some SQL reports (see https://wiki.koha-community.org/wiki/SQL_Reports_Library)
- Go on the report list page (/reports/guided_reports.pl?phase=Use saved)
- For the reports using biblioitems.marcxml you will see a new column
warning you that it is obsolete
- Click on update link
=> that will open a modal with the converted SQL query
- Click on the update button
=> you will be informed that the query has been updated
If all the reports are updated, the new column "Update" will no longer
be displayed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The commit cf90317112
Bug 14435: Add the ability to store result's report
introduced a regression when searching for reports by keywords.
It also breaks tests in t/db_dependent/Reports/Guided.t
It's caused by the missing join on saved_reports.
The error says DBD::mysql::db selectall_arrayref failed: Unknown column
'report' in 'where clause'
Test plan:
Confirm that the tests are fixed and that you are able to search for
reports using the "keyword" input
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At one time it was possible to store the results of a report into the
saved_reports table.
This allowed the librarians to compare different results, from the Koha
interface.
This patch is a proof of concept and is not very polished (understood:
it cannot be pushed like that).
Test plan:
Execute the runreport.pl cronjob script with the new --store-results
option.
This will serialize into json the results and put it into the
saved_reports table.
On the "Saved report" list, the "Saved results" column is now populated
with a date (note that you can have several date for a given report).
If you click on this link, the data will be displayed in a simple table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces sql queries done in some pl script and in
C4::Reports::Guided.
Since we have now a Koha::Patron::Categories module, we should use it
where it is possible.
Test plan:
- Prerequisite: Be sure you have several patron categories created, with
different option enabled, and limit some to certain libraries.
- On the 'Circulation and fine rules' admin page (admin/smart-rules.pl),
all the patron categories should be displayed (even the ones limited to
another library), ordered by description. Try to add/update existing rules.
- On the overdue rules page (tools/overduerules.pl), all the patron
categories with overduenoticerequired set should be displayed.
Try to add/update existing rules.
- On the following reports:
reports/borrowers_stats.pl
reports/issues_avg_stats.pl
The patron categories should be displayed. Note that there is an
inconsistency with these 2 reports: the patron categories limited to
other libraries are displayed on them, when they are not on the other
reports. This should certainly be fixed (on another bug report).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Koha::IsAuthorisedValueCategory contains only 2 useful calls, from
C4::Reports::Guided and reports/guided_reports.pl
It can be replaced with
Koha::AuthorisedValues->search({ category => $authorised_value})->count
Test plan:
1/ Create a sql report using an authorised value category, something
like:
SELECT COUNT(*) FROM items where itemlost=<<lost|LOST>>
2/ Execute the report and confirm that everything works fine.
3/ Create a sql report using a nonexistent authorised value categor,
something like:
SELECT COUNT(*) FROM items where itemlost=<<lost|NONEXIST>>
4/ When saving the report, you should get a warning message
"lost: The authorized value category (NONEXIST) you selected does not exist."
5/ Save anyway and execute the report, you should get the same warning
message.
QA:
git grep IsAuthorisedValueCategory
should not return any results
prove t/db_dependent/ReportsGuided.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine has been added by
commit 42acfbf75b
Bug 7993: Save reports with Group/Subgroup hierarchy
But it has never been used (or git grep cheats me).
Test plan:
1/ git grep build_authorised_value_list
should not return any result
2/ Create a report, execute it
Everything should work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch removes C4::Dates from files:
- reports/guided_reports.pl
- reports/dictionary.pl
- C4/Reports/Guided.pm
To test:
- Go to Home > Reports > Guided reports wizard
- Then go to 'View Dictionary' (menue at teh left)
- Click 'New definition' and step through
- In step 2. select e.g. borrowers
- In step 3 select a date field
- In step 4, select date range and test start / end dates
- In step 5, verify that dates display properly
- Save and verify that dates are insertet properly in sql definition
- Go back to Home > Reports > Guided reports wizard
- Step through the wizard and verify that it works as before.
http://bugs.koha-community.org/show_bug.cgi?id=14982
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Follow-up for reports.
Test plan:
1/ Use a translated template (fr-FR or ar-Arab)
2/ Go on the report guided page, step 3
3/ The field names should be correctly encoded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Most of them were found and fixed using codespell.
Fix also some related grammar issues.
In C4/Serials.pm a variable was renamed to make future codespelling
checks easier.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
http://bugs.koha-community.org/show_bug.cgi?id=14383
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See QA comment #5
- new reports log their Id instead of 0
- format info: <name> | <sql>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch sets adds the possibility to log new, update and delete actions for saved reports.
To test:
-Apply patch
-Run updatedatabase.pl
-Enable system preference ReportsLog
-Create, duplicate, edit and delete saved reports
-Go to Home > Tools > Logs
-Verify that you can select "Reports" in Modules list
-Verify that your actions were logged
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
