See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Have some holds and build the holds queue.
2. Go to view_holdsqueue.tt, there is no patron category column
3. Apply patch
4. Look again, there should now be a column for 'Patron category'
showing both the caterory name and the category code.
5. Make sure you can sort and filter by this new column
6. Go to table settings and make sure you can properly hide this column
and all other columns in the Holds queue.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a check for browser support for the "applicationCache"
feature required by the offline circulation tool. If the feature is not
available, a message is shown to the user that offline circulation is
disabled.
To test, apply the patch and enable the AllowOfflineCirculation system
preference.
In a browser which supports applicationCache (Firefox < 81, Chrome < 94,
Safari <= 15), go to Circulation -> Built-in offline circulation
interface.
- You should see the standard Offline Circulation menu options: Check
out, check in, syncrhonize, etc.
- Click "Synchronize," then "Download records."
- The process should complete correctly, updating the "last synced"
information on the page.
Follow the same steps in a browser which has dropped support for
applicationCache. As soon as you reach the built-in offline circulation
page you should see a message, "Your browser is not compatible..."
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add new column item type to holds table in patron's details and check
out views. Some libraries will find this information useful for
distinguishing inter library holds from normal holds.
To test:
1. Apply patch
2. Place a hold and confirm it
3. Go to cgi-bin/koha/circ/circulation.pl?borrowernumber=1 with
borrowernumber being the id of your patron
4. Click "1 Hold(s)" tab
5. Observe new column "Item type"
6. Confirm the item type is correct
7. Go to moremember.pl?borrowernumber=1 with
borrowernumber being the id of your patron
8. Repeat steps 4-6
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add a 'Resolve' button in the alert dialogue that is displayed when a
lost item with a return claim is checked in. The button will trigger the
usual resolution modal allowing the user to pick their resolution.
This patch splits the resolution modal out of checkouts.js and
checkouts-table.inc so it can be used outside of the checkouts table.
We then reload it, optionally based upon the presence of the claims
preference, where needed. This has the added benefit that it saves a
little bit of page load data in cases where the feature is not enabled.
Test plan
1. As we alter the file locations of the resolution handling code we
need to test that normal claims functionality continue to work as
expected.
2. Test the new functoinality by checking in an item that has been
claimed as returned (but not yet resolved). The dialogue box should
now contain a 'resolve' button next to each claimant and clicking
upon it should trigger the resolution modal where the librarian can
subsequently pick the resolution and submit it.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the wantarray use in Koha::Clubs->get_enrollable and
adjusts the callers.
Also, reference to some unused params in Koha::Patron clubs-related
methods are removed as well.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch:
- Adds a notice about the fee to be charged to the patron (staff and
OPAC)
- Adds the right UI description for ARTICLE_REQUEST_FEE debit types in
the UI.
To test:
1. Have some article request fee rules
2. Play with placing an article request in OPAC and staff
=> SUCCESS: You see a message about the fee
=> SUCCESS: The fees are correctly applied to the patron
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the patron page (detail and circulation) use the API to
suspend/resume holds on the holds tab.
It previously used the old svc/ scripts we plan to replace.
To test
1. Have a patron with some holds
2. Play with suspending/resuming holds. Include the indefinite
suspension.
=> SUCCESS: Everything works as usual
3. Apply this patch
4. Repeat 2
=> SUCCESS: Nothing changed, a soft breeze surprises you
5. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In circ/overdue.tt there is a end tag </td> inside a IF condition.
I should be outside.
Test plan :
Check HTML in overdue page with and without seeing patrons infos from other
branches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes a few corrections, including adding the
correct Flatpickr date format option when the timepicker is enabled.
Besides past and future date options, I've added a "pastinclusive"
option which allows dates in the past OR today. This option was
previously applied to the checkin page.
The patch also corrects a couple of places where the wrong date field
was modified with the new data attributes.
To test, apply the patch and test the datepickers on the batch checkout
and renew pages. When you select a date and time the "TimeFormat" system
preference should be correctly applied.
The calendar widget on the checkin page should allow you to select
today's date.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We must reduce the instantiations as much as possible to take advantages
of the default values and specific behaviours we have defined in
calendar.inc
This patch is suggesting to have a .flatpickr class and using the data
attributes:
- flatpickr-futuredate
- flatpickr-pastdate
- flatpickr-enable-time
- flatpickr-on-close-focus
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates a few more instances of jQueryUI datepickers which
were missed initially, replacing them with Flatpickr widgets.
Also changed: A few datetime input fields are updated to have a size of
20, consistent with other datetime input fields.
To test, apply the patch and go to Circulation.
Check in:
- With the 'SpecifyReturnDate' system preference enabled, go to Check
in.
- Click the "Checkin settings" link.
- Test the "Specify return date" field. Clicking it should trigger a
Flatpickr widget with a time picker. It should limit your selection to
dates in the past.
- Check the "Remember return date" checkbox and confirm that the date is
preserved over page reloads.
- Check and uncheck the "Box drop mode" checkbox to confirm that the
return date field is disabled and enabled correctly.
Check out:
- With the 'AllowRenewalOnHoldOverride' preference enabled, check out to
a patron who has a checkout which is on hold for another patron.
- At the bottom of the table of checkouts, click the "Override renewal
restrictions" checkbox.
- The on-hold checkouts should now have a checkbox in the "Renew"
column. Check one or more of these checkboxes.
- In the table footer you should now see two date inputs, "Renewal due
date" and "On hold due date." These should both trigger Flatpickr
widgets with time pickers.
- Confirm that your date selections are submitted correctly when you
renew items.
ILL checkout:
- Create a new ILL request with the type "book," filling in at least
title, patron, and destination library.
- On the "Manage ILL request" page, click "Confirm request" and "Confirm
request" on the next confirmation page.
- There should now be a "Check out" button in the "Manage ILL request"
toolbar. Click it.
- Test the "Due date" field. It should trigger a Flatpickr widget with a
time picker.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We did some clean-up in that area a little while ago, agreeing that
as we acutally display the descriptions, the label should be just
"collection".
This patch also removes some ():
Before:
4 items found for Centerville and item type:(Books) and collection: (Reference) and shelving location: (General Stacks)
Now:
4 items found for Centerville and item type: Books and collection: Reference and shelving location: General Stacks
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the new filter form in the sidebar when showing results.
To do so the form markup is moved into a BLOCK so that it can be reused.
This patch also adds pre-selection of submitted options on the filter
form so that it reflects the user's choices.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation -> Holds queue.
- Submit the form with one or more filters selected.
- On the results page the queue should be correctly filtered and the
sidebar should show your search fields preselected.
- Test with the CircSidebar preference enabled and disabled. The
circulation menu should appear correctly, with the filter form only
displaying in the sidebar after submitting the form.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the "Holding library" column in the returns table
with a 'Transfer to' column that displays the destination for the item
awaiting transfer if a transfer exists.
Signed-off-by: Ben Daeuber <bdaeuber@fargolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies templates so that instances of "cardnumber" are
replaced with "card number."
Some instances where the word "card" is used by itself have been updated
to "library card" to add some context.
To test, apply the patch and view the following pages:
- Circulation -> Built-in offline circulation interface -> Submit the
"Check out" form without entering number. Check the alert message
which appears.
- Go to Administration -> System preferences and enable the
AutoMemberNum system preference and use the BorrowerMandatoryField
preference to make card number mandatory.
- Go to Patrons -> New patron. The hint under the "Card number" field
should refer to "card number" instead of "cardnumber."
- Go to Tools -> Import patrons.
- Under the page heading, the note should read "If a card number
exists..."
- Under "Field to use for record matching" you should see a "Card
number" option in the menu.
- If you try to import a CSV with an invalid card number you'll see an
error message, "Card number X is not a valid card number."
- Under Tools -> Upload patron images, check the "image file" radio
button. The card number field label should read "Enter patron card
number."
- Log in to the OPAC as a patron whose card has been marked lost. Try to
place a hold. You should see a message containing "please take your
library card to the circulation desk"
- On the "your summary" page you should see a message, "Your library
card has been marked as lost or stolen."
- Try to check out an item to this patron in the self-checkout system.
You should be shown a message, "This library card has been declared
lost."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Place a variety of holds on some records
2 - Place more holds on records with low biblionumbers and less on ones with high biblionumbers
3 - Go to Circulation->Holds ratios
4 - Set the ration to 1 and load the report
5 - Sort by the 'Holds ratio' column and note it is incorrect
6 - Apply patch
7 - Confirm sort works correctly on first three columns and call numbers column
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves to using a data-start_for attribute to point the 'from'
flatpickr to the 'to' flatpickr.
We also fix the date validation issue in the onClose handler inline.
Test plan.
1. Check that the from/to datpicker combinations work on each of the
changed pages.
2. Look at the console for errors, there should be none
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug allows for batch printing of multiple article requests slips
To test:
1. apply this patch
2. restart_all
3. enable ArticleRequests preference
4. create multiple article requests
5. go to circ/article-requests.pl in staff interface
6. print a single slip from a row
CHECK => it works as expected
7. select all rows and print slip from general actions menu (above the table)
SUCCESS => all article requests slips are printed
8. select multiple rows (not all) and print slip from general actions menu (above the table)
SUCCESS => only selected article requests slips are printed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Perltidy!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 27944 added another block for the new stage introduced.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Checkout' search hijacks some of the DataTables searching code used for 'Search patrons'
Rather than try to implement the search again on another page, we can simply send the user
to the patron search if the cardnumber is not found
Additionally, this patch adds a 'Check out' button to the patron search results to allow
going to checkotus directly
To test:
1 - Apply patch
2 - Perform a 'Checkout' search from the header
3 - Note that:
For a cardnumber, you are redirected directly to checkouts page for the borrower
For a search with one result, you are redirected directly to the checkout page for the borrower
For a search with many results, you are redirected to the patron search results
and there is a 'Checkout' button under the cardnumber
4 - Confirm circulation page works as expected (i.e. checkout to a patron)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug corrects the text "Reserve notes" to be "Hold notes" on the
holds to pull page.
To test, apply the patch and go to Circulation -> Holds to pull.
You should see in the table header a column labeled "Hold notes."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes Koha::Patron->article_requests use the underlying DBIC
relationship and _new_from_dbic instead of a plain search. It also
refactors 'article_requests_current' and 'article_requests_finished' to
use ->article_requests, as well as the new methods introduced by bug
29082 for filtering.
No behavior change should take place.
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Biblio.t \
t/db_dependent/ArticleRequests.t
=> SUCCESS: Tests pass!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29084: Unit tests
This patch adds missing tests for Koha::Biblio->article_requests and
reorganizes (and extends) the tests for 'article_requests_current' and
'article_requests_finished' that were originally in ArticleRequests.t
into Koha/Biblio.t as we do now.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/ArticleRequests.t \
t/db_dependent/Koha/Biblio.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29084: Remove article_requests_finished and article_requests_current
This patch removes those methods that are not really needed. Templates
are adjusted to use the expected combination of
->article_requests->filter_by_current.
To test:
1. Apply this patch
2. Visit a biblio with article requests
=> SUCCESS: All works
3. Run:
$ kshell
k$ prove t/db_dependent/Koha/Biblio.t
=> SUCCESS: Tests pass, less tests.
4. Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes Koha::Patron->article_requests use the underlying DBIC
relationship and _new_from_dbic instead of a plain search. It also
refactors 'article_requests_current' and 'article_requests_finished' to
use ->article_requests, as well as the new methods introduced by bug
29082 for filtering.
No behavior change should take place.
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t \
t/db_dependent/ArticleRequests.t
=> SUCCESS: Tests pass!
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Unit tests
This patch adds missing tests for Koha::Patron->article_requests and
moves (and extends) tests for 'article_requests_current' and
'article_requests_finished' that were originally in ArticleRequests.t
into Koha/Patron.t as we now do.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/ArticleRequests.t \
t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: (QA follow-up) Remove unused param
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Fix OPAC listing of article requests
This patch makes the OPAC template reuse a precalculated value for the
active article requests for the patron (and its count).
The original code relied on the methods returning a list, which is not
the case for _new_from_dbic until bug 28883 is pushed.
This patch fixes that.
Note: there was an odd behavior when ArticleRequests was enabled but no
active article requests were present: the tab wasn't rendered but the
'empty table' with the 'You have no article requests currently.' message
was displayed below the Checkouts tab. I'm not sure that was caused by
this patches, or other. Fixed on this patch.
To test:
1. In the OPAC, go to 'your summary'
=> FAIL: Things don't show for article requests
2. Add some article requests and repeat 1
=> FAIL: Something's wrong there
3. Apply this patch and repeat 1
=> Yes! Things show correctly!
4. Cancel all your article requests
=> SUCCESS: Things render as they should
5. Re-enter the 'your summary' page (to force re-rendering)
=> SUCCESS: Things render correctly for empty article requests
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 29083: Remove article_requests_finished and article_requests_current
This patch removes those methods that are not really needed. Templates
are adjusted to use the expected combination of
->article_requests->filter_by_current.
To test:
1. Apply this patch
2. Visit a patron with article requests
=> SUCCESS: All works
3. Run:
$ kshell
k$ prove t/db_dependent/Koha/Patron.t
=> SUCCESS: Tests pass, less tests.
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug adds a cancellation reason authorised values to article requests
To test:
1. apply this patch
2. updatedatabase
3. in staff interface go to /cgi-bin/koha/admin/authorised_values.pl
CHECK => AR_CANCELLATION category should appears
4. place several article requests
5. in staff interface go to /cgi-bin/koha/circ/article-requests.pl
6. select multiple requests, or just one and cancel them
SUCCESS => a modal pops up offering to select a cancellation reason
CHECK => message_queue table has messages with cancellation reason included
7. repeat steps 4 to 6 but for /cgi-bin/koha/circ/request-article.pl
8. cancelling article requests from opac interface should work just as before
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the stage "requested" in article request process, which
is previous to pending stage.
To test:
1. apply this patch
2. updatedatabase
3. enable ArticleRequests syspref
4. from staff inteface and from opac search for a record and place an
article request
5. koha-mysql kohadev
6. query: select subject, content, letter_code from message_queue;
CHECK => There is a message for each article request with code
AR_REQUESTED
=> In opac-user.pl, in "Article requests" tab you should see a row
in the table with "Requested" status
5. in staff go to Circulation -> Article Requests
SUCCESS => You should see 3 tabs, one for Requested stage (with two
requests), one for Pending stage and one for Processing stage.
6. play with actions buttons
CHECK => you should see a new action called "Set request as pending"
SUCCESS => All action buttons behave as expected, and tab counts updates
correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the staff interface catalog search results to use
a new reusable BLOCK for displaying item information: Available items,
checked-out items, and unavailable items.
Some style has been updated, and an old GIF image has been replaced with
an SVG. The hold ratios template has been updated to accommodate this
change.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Perform a catalog search in the staff interface which will return
multiple results with multiple items each. For thorough testing, some
records should have items which are checked out, available, or
lost/notforloan.
- On the search results page, confirm that item information is accurate
and readable.
- Test with item-level_itypes on and off.
- Test with noItemTypeImages on and off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - place an item level hold, it says: [one of the barcodes] or any available
2 - place a bib level hold, it says: [one of the barcodes] or any available
3 - Apply patch
4 - item level hold should say: Only [barcode]
5 - bib level hold should say: [one of the barcodes] or any available
Signed-off-by: Azucena <Azucena.Aguayo@uvu.edu>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the use of jQueryUI's datepicker on circulation and
patron-related pages.
The patch modifies Flatpickr's default configuration (in calendar.inc)
so that it has the following features:
- A Flatpickr input with a "futuredate" class will require that the
selected date be after today.
- The Flatpickr input field will be wrapped in a container to
facilitate better CSS styling.
- Generic handling of paired date fields is enabled using
".flatpickrfrom" and ".flatpickrto" field classes. This mimics the
same feature we have for jQueryUI datepickers using ".datepickerfrom"
and ".datepickerto".
This patch also removes an unused function which was repeated in three
templates: validate1.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation and check out to a patron.
- Open the Restrictions tab and click "Add manual restriction."
- In the "Expiration" field, test that the Flatpickr widget works
correctly and limits to dates after today.
- Enable the SpecifyDueDate preference if necessary.
- Test the behavior of the SpecifyDueDate controls: Setting a date,
clearing a date, session persistence.
- Enable the SuspendHoldsIntranet system preference if necessary.
- Check out to a patron with existing holds.
- Open the Holds tab and click the "Suspend" button for one of the
holds.
- In the modal window which appears, check that the Flatpickr
widget works correctly and limits to dates after today.
- At the bottom of the table of holds, test that the "Suspend all
holds" Flatpickr works correctly and limits to dates after
today.
- Perform this same test from the patron details page.
- Enable the BatchCheckouts system preference if necessary.
- Open a patron record and click "Batch check out" in the left-hand
sidebar menu.
- Test that the "Hard due date" Flatpickr works correctly as a date
and time picker.
- Go to Circulation -> Overdues.
- Test that the date due filters in the sidebar work correctly and
are linked, e.g. the "to" field cannot be before the "from" field.
- Perform the same test here: Circulation -> Holds to pull; and
here: Circulation -> Hold ratios.
- Enable the HouseboundModule system preference if necessary.
- Check out to or view details of a patron.
- Click "Housebound" in the sidebar menu.
- Save delivery day and frequency settings for that patron.
- Click "Add a new delivery."
- Test that the "Date" Flatpickr widget works correctly.
- Go to Patrons -> A patron record -> Edit.
- Test that Flatpickr widgets work on the following fields:
- Date of birth
- Registration date & Expiration date (linked).
- Patron restrictions -> Add manual restriction -> Expiration.
- View a bibliographic record and start the process of placing a hold.
- After selecting a patron, test the "Hold starts on" and "Hold
expires on" date fields. The fields should be linked and each
should limit to future dates.
- Confirm that the dates are saved correctly when you submit the
hold.
- Locate a bibliographic record with multiple holds and view the holds.
- In the table of holds, test each date field: Date, expiration, and
suspend-until.
- Test that Flatpickr's static "formatDate" method is working
correctly:
- Locate a bibliographic record's item so that there is text in both
the "Public note" and "Non-public note" field.
- Check that item out to a patron.
- After the page reloads the public and non-public notes should be
shown under the checkout title highlighted in red.
- Check for references to a "validate1" function. There should be none.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes capitalization corrections to many templates in the
OPAC and staff interface. A exhaustive test plan would be huge, so I
recommend examining the patch to confirm that it contains correct case
changes.
If you want to make it easier to examine changes you can try:
https://github.com/so-fancy/diff-so-fancy
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When preference CircAutoPrintQuickSlip is 'clear the screen', when an empty barcode field is submitted in circulation :
Before Bug 17845, behavior was to display empty circulation page (no patron selected).
Now behavior is displaying the circulation page of current patron.
I think previous behavior was used when scanner is used to clear form and wait for another patron card to be scanned.
Test plan :
1) Set system preference CircAutoPrintQuickSlip to 'clear the screen'
2) Go to a patron circulation page
3) Post form without a barcode
=> Check you go to circulation page with no patron selected
4) Set system preference CircAutoPrintQuickSlip to 'open a print quick slip window'
5) Go to a patron circulation page
6) Post form without a barcode
=> Check you go to print quick slip window with correct datas
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is a proof of concept demonstrating how jQueryUI date & time
pickers could be replaced using the Flatpickr library
(https://flatpickr.js.org/).
NEW: I've modified the default configuration of Flatpickr instances so
that a "Clear date" link is automatically appended. This eliminates the
need to add a button to the markup and event handling for each case.
NEW: Date/time formatting should be corrected in this revised patch.
The patch modifies three pages as test cases:
- Circulation -> Renew (with SpecifyDueDates enabled), to demonstrate
date and time selection.
- NEW: You can also test the datepicker shown when you renew an
on-hold item. This demonstrates a configuration which requires that
the selection be after today.
- Administration -> Patron categories -> New category, to demonstrate a
calendar-only date picker enforcing a date after today.
- NEW: Reports -> Patrons. The "Date of birth" fields are linked so
that the second cannot be before the first.
I've made some customizations to the default Flatpickr library's CSS and
incorporated it into staff-global.scss, so you must rebuild the staff
client SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Disable AutomaticItemReturn systme preference
2 - Check in an item that does not float at a branch no it's home
3 - Test new accesskeys for I,N,Y,P
4 - With transfer confirmed check the item in at a wrong branch
5 - Test accesskeys Y,P,X
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds accesskey elements to the hold modals during checkin
For tips on how to access the accesskeys:
https://developer.mozilla.org/en-US/docs/Web/HTML/Global_attributes/accesskey
To test:
1 - Place some holds on items
2 - Check in an item with a hold at a branch that requires transfer
3 - Use accesskey I to ignore
4 - Use accesskey Y to confirm and transfer
5 - Check in again
6 - Use accesskey Y to confirm
7 - Repeat 4-6 with a new hold but use the accesskey P to print the slip
8 - Check in the item again ans use accesskey X to cancel
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
