If a definition in api/v1/definitions/*.json has a corresponding Koha-object by
filename, compare properties of the definition and columns of the Koha-object
and ensure that all columns are defined inside properties of the definition.
To test:
1. Run t/db_dependent/api/v1/swagger/definitions.t
2. See that all of the tests pass. (If not, file a bug report to fix missing
properties in the Swagger definition.)
3. Remove a property from api/v1/swagger/definitions/patron.json
4. Repeat step 1
5. See that test fails and lets you know that the property you just removed
is missing from the definition.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It would be helpful if we could find a plugin based on some metadata
tag as returned by the plugin. This extends the use of GetPlugins that
already supports searching on method.
GetPlugins is used in: admin/edi_accounts.pl, plugins/plugins-home.pl and
tools/stage-marc-import.pl. The changes in these three scripts are
minimal and just related to parameter passing.
Test t/db_dependent/Plugins.t includes another test for GetPlugins. In this
regard a metadata tag has been added to t/Koha/Plugins/Test.pm.
NOTE: This adjustment will also be used in a redesign for bug 15545.
Test plan:
Run t/db_dependent/Plugins.t.
Enable pref UseKohaPlugins and config var enable_plugins.
Go to plugins-home.pl. Verify that it still lists your plugins.
Bonus: Check edi_accounts or stage-marc-import.pl if you have a working
plugin for that.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previous patch but if another circ rule exists
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the case on-site checkouts are considered as a regular checkout in issuing
rules (i.e. ConsiderOnSiteCheckoutsAsNormalCheckouts is on):
When after the on-site checkout the maximum limit of checkouts is
reached and the patron wants to switch an on-site checkout to a regular
checkout, the C4::Circulation::TooMany subroutine will return a
TOO_MANY_CHECKOUTS error.
To avoid that, we need to allow an extra checkout in this subroutine.
Test plan:
0/ Switch ConsiderOnSiteCheckoutsAsNormalCheckouts and
SwitchOnSiteCheckouts on
1/ In the issuing rules, set the total number of checkouts (maxissueqty)
to 2 and the number of on-site checkouts to 2 (maxonsiteissueqty)
2/ Check 2 items out ticking the 'on-site checkout' checkbox
3/ Check one of these items out, to automatically switch it to a regular
checkout
=> The checkout should be allowed.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds 2 new methods to Koha::Review: approve and unapprove.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutines in C4::Reviews are only doing CRUD operations.
This patch set moves them to 2 new Koha::Review[s] classes.
Test plan for the whole patch set:
0/ Set the reviewson syspref
1/ At the OPAC, create a couple of reviews for a record
Try and create a review without html tags different that br b i em big
small strong: You should get a warning.
2/ Edit a review
3/ On the Staff interface, you should see a "Comments pending approval"
link on the mainpage
4/ Approve 1 review and delete the other
5/ At the OPAC you should only see 1 review (the approved one) in the
"Comments" tab
6/ Modify the review
7/ The review should appear again in the "comments awaiting moderation"
tab.
Note that even the comment has not been changed, it will have to be
reapproved (FIXME later). This behavior already existed prior to this
patch.
Tested all patches together (with database updated)
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just move C4::Members::HasOverdues to
Koha::Patron->has_overdues and updated callers
Test plan:
No change in behavior is expected.
1/ If a patron is debarred and does not have overdues and
AutoRemoveOverduesRestrictions is on, the debarment will be removed on
checkin
2/ Add overdues and make sure the patron cannot renew
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To make sure nothing else will be broken, it's certainly better to
handle date strings in a first phase.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the doc of C4::Ratings, it was written that the rate values should be
>=0 and <=5, but it was not taken into account.
This bug should be fixed on stable releases as well.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rewrite and move the tests.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The purpose of C4::Members::GetBorrowercategory was to return the patron
category for a given categorycode. This can be done easily with the
Koha::Patron::Categories->find method.
Test plan:
- Same prerequisite as before
- Edit a guarantor and confirm the information will be updated for his/her
guarantee(s).
- Update a child to adult patron (Note: Should not we hide the patron
categories limited to others libraries? If yes, it must be done on another
bug report).
There is a special behavior if there is only 1 adult category, the
user does not need to select a category. So the same as before with
only 1 adult patron category.
- Import a patron with a category_code which does not exist. You should
be warned.
- Modify some patron using the batch patron modification tool. The
patron category descriptions should correctly be displayed.
Note that the overduerules page has already been tested in a previous
patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Category module contained only 1 method to return the patron
categories available for the logged in user.
The new method Koha::Patron::Categories->search_limited does exactly the
same thing (see tests) and must be used in place of it.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to
other libraries.
- On the 'Item circulation alerts' admin page
(admin/item_circulation_alerts.pl), modify the settings for check-in
and checkout (NOTE: Should not we display all patron categories on
this page? If yes, it must be done in another bug report to ease
backporting it).
- Search for patrons in the admin (budget) and acquisition (order) module.
- On the patron home page (search form in the header)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add should_hide_marc to ViewPolicy filter
Add should_hide_marc tests to t/db_dependent/Filter_MARC_ViewPolicy.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
s/Koha::Cache->get_instance/Koha::Caches->get_instance
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We need to define several namespaces for our cache system.
For instance sysprefs, koha conf (koha-conf.xml) and unit tests
should be defined in a separate namespace.
This will permit to
- launch the tests without interfering with other cache values
- and flush the sysprefs cache without flushing all other values
To do so, we need to store different Koha::Cache objects at a package
level. That's why this patch adds a new Koha::Caches module.
FIXME: There is an architecture problem here: the L1 cache should be
defined in Koha::Cache
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=11921
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Removes tests no longer needed
* Updates rules to work with existing tests
* Fixes code issues revealed by unit tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Creates a few simple tests for the two new subroutines in ImportBatch.pm.
Test plan:
Run t/ImportBatch.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I really don't know how these tests passed before 16431, the mapping was not complete.
Test plan:
prove t/db_dependent/Search.t
should return green
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When user does not have required permissions to use API operation, it would be
useful to let them know which permissions he is missing. Since they are now
defined in Swagger, we can easily render them into the response.
To test:
1. Use a patron without any permissions
2. Make GET request to http://yourlib/api/v1/patrons
3. Observe permission error and see that required_permissions are displayed.
4. Run t/db_dependent/api/v1/patrons.t
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1. Run t/db_dependent/api/v1/holds.t
2. Run t/db_dependent/api/v1/patrons.t
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch re-introduces the transaction into t/db_dependent/Items_DelItemCheck.t
and does some cleaning on the touched tests so they raise less warnings.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove $dbh as argument to C4::Items::DelItemCheck
and C4::Items::ItemSafeToDelete, also change all
calls to these functions throughout the codebase.
Also remove remaining reference to 'do_not_commit' in
t/db_dependent/Items_DelItemCheck.t
Fixed doubled "$$" in C4/ImportBatch.pm
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
