It was there already but not at the same place!
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some SIP devices need access to item fields that are not sent as item information in the checkin, checkout and item information responses.
It makes sense to allow these fields to be sent in an arbitrary and configurable way, rather than hard code in each special case.
Test Plan:
1) Apply this patch
2) Edit your SIP2 config file, add the following within the login stanza:
<item_field field="XX" code="<item field 1>" />
<item_field field="XZ" code="<item fied 2>" />
where <item field 1> and <item field 2> are item table columns of your choosing
3) Using the sip cli emulator, run checkout, checkin and item information
messages using that item.
4) Note the values you set for the item columns are sent in the
corrosponding fields!
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Fixed merge conflict with number of tests (was 5, changed to 7 which is correct)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As promised, I am commenting out the configuration for git repositories
to use for searches by default prior to release. To enable the feature,
simply uncomment the relevant github repositories or add your own.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
== test plan ==
To test:
0 - Have Koha running with ES 6 enabled
1 - Launch the z3950 responder:
perl misc/z3950_responder.pl --config-dir /kohadevbox/koha/etc/z3950 --debug
2 - Connect using yaz-client:
yaz-client localhost:2100
2.1 Alternative, if you add the responder as a Z39.50 server in Koha and
do a catalogue Z39.50 search. Don't forget to search in the keywords
field. Not the title field.
3 - base biblios
4 - find bruce
5 - No results
6 - Stop the responder
7 - Apply patch
8 - Repeat
9 - This time you get results
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
* We should not call Log::Log4perl directly
* Not sure it is correct as I get from (comment 77):
% koha-sip --restart
[2020/04/23 11:23:27] [ERROR] [undef]@[undef]: Argument "0.33_01" isn't
numeric in numeric lt (<) at /usr/share/perl5/Net/Server/Log/Sys/Syslog.pm
line 42.
C4::SIP::Trapper::PRINT /kohadevbox/koha/C4/SIP/Trapper.pm (24)
Why "ERROR" when it's a warning?
The [undef]@[undef] seems wrong here.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It looks like RewriteLog will no longer work with Apache 2.4 and later.
RewriteLog
Those familiar with earlier versions of mod_rewrite will
no doubt be looking for the RewriteLog and RewriteLogLevel
directives. This functionality has been completely replaced
by the new per-module logging configuration mentioned above.
http://httpd.apache.org/docs/current/mod/mod_rewrite.html
All lines removed were commented out, so there should be
no change in behaviour or side effects.
To test.
- Verify every mention of RewriteLog has been removed from Koha
- Verify patch by reading it
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
According to the list of two-letter language codes found in ISO 639-1
(https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes), the correct
Zebra language option for Greek should be 'el', not 'gr'.
This patch fixes that.
Test plan:
0) Apply the patch.
1) Confirm that 'gr' has been changed to 'el' in all relevant files.
2) Create a new Koha instance using `koha-create --zebralang el testinst1`.
3) Edit /etc/koha/koha-sites.conf and set ZEBRA_LANGUAGE to 'el'. Then,
create another Koha instance with `koha-create testinst2`.
4) Confirm that both instances created in steps 2) and 3) have picked up
the Zebra CHR file from the /etc/koha/zebradb/lang_defs/el/ directory.
This is done by inspecting the value of 'profilePath' in these files:
/etc/koha/sites/testinst{1,2}/zebra-authorities-dom.cfg
/etc/koha/sites/testinst{1,2}/zebra-biblios-dom.cfg
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - You will need to enable SIP on your testing instance
cp etc/SIPconfig.xml /etc/koha/sites/kohadev/
sudo koha-start-sip
add a user listed in the SIPconfig to your system and give them permissions (superlibrarian works)
on koha-testing-docker you should be able to start sip with user koha/koha without any adjustments
2 - If you copied the above file you should be set to get custom field DE with dateexpiry
Otherwise edit the sip login for the user to have a custom section like:
<login id="koha" password="koha" delimiter="|" error-detect="enabled" institution="kohalibrary" encoding="utf8" >
<custom_patron_field field="DE" template="[% patron.dateexpiry %]" />
</login>
3 - send a status test using the sip cli tester:
perl misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su koha -sp koha -l kohalibrary --patron 23529001000463 -m patron_status_request
4 - send an information test using the sip cli tester:
perl misc/sip_cli_emulator.pl -a 127.0.0.1 -p 6001 -su koha -sp koha -l kohalibrary --patron 23529001000463 -m patron_information
5 - confirm you receive the DE field with a dateexpiry
6 - Add your own custom fields and confirm it works with several
<custom_patron_field field="EW" template="Phone: [% patron.phone %] Email: [% patron.email %]" />
7 - prove -v t/db_dependent/SIP/Patron.t
8 - prove -v t/db_dependent/SIP/
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
No more wide characters in print when logging to a file with Koha::Logger.
Test with this string
"♯Turpo :"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ablity to specify a cash register id to link to
payments taken via SIP2 clients.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The line for enabling the unsafe expand_entities option is commented
and includes a warning to keep it like that ;)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It would be nice to be able to search and install plugins directly from GitHub ( and GitLab if possible ). This would make it easier to verify the authenticity of plugins and make discovering new plugins easier as well as making installation of plugins simpler.
Test Plan:
1) Apply this patch
2) Add the new block for plugin_repos to your koha-conf.xml
3) Restart all the things!
4) Browse to the plugins home page
5) Try searching for 'patrons' in the new search box
6) Verify you get results!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
At the last development meeting we have voted to remove the
QueryParser-related code
https://wiki.koha-community.org/wiki/Development_IRC_meeting_19_February_2020
Hea tells us that it has not been adopted, and the code/bug tracker that
it is not really usable as it. As nobody is willing to work on it, we
decided to remove it instead.
Test plan:
% prove t/db_dependent/Search.t
must return green
See commits from bug 9239 and confirm that the code is removed in this
patch.
Also play with the search on the UI and confirm that you do not see
obvious regressions
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Patch change Apache access control from 2.2 to 2.4 directives.
Test plan:
0. Apply patch
1. Build Koha from source
2. Copy or symlink koha-dev/etc/koha-httpd.conf into your relevant
Apache directory.
3. Reload Apache
4. Note a lack of syntax errors regarding the "Order" directive
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Trivial change. Speaks for itself.
Since koha/detail.pl does not exist, we cannot break things ;)
Test plan:
[1] Copy the change in apache-shared-intranet.conf to your actual
apache configuration. Probably in /etc/koha/.
[2] Restart Apache.
[3] Try a biblionumber say 123 on intranet with [your_staff_client]/bib/123.
Does the detail page come up?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Removes last remaining bit of configuration for the Titles facet
configuration.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some Sami languages need few more characters to be mapped, or
are otherwise very hard to search for.
Test plan:
1) Catalogue a new record with title "Ǩoǯeŋa"
2) Make sure zebra indexed that record, then try to search for
it with the text "kozena"
3) Apply patch
4) Redo 2, now the record should be found.
Signed-off-by: Pasi Kallinen <pasi.kallinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing entries are added to those files.
Test plan:
Search for typos
Compare the two files and comfirm the entries are the same in both.
Exception: supportdir exists in etc/koha-conf.xml only, but I think it's
obsolete.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Koha has a number of features that rely on knowing the IP address of the connecting client. If that server is behind a proxy these features do not work.
This patch adds a module to automatically convert the X-Forwarded-For header into the REMOTE_ADDR environment variable for both CGI and Plack processes.
TEST PLAN:
1) Apply this patch set
2) Install Plack::Middleware::RealIP via cpanm or your favorite utility
3) Update your plack.psgi with the changes you find in this patch set ( this process differs based on your testing environment )
4) Restart plack
5) Tail the plack error log for your instance
6) Use curl to access the OPAC, adding an X-Forwarded-For header: curl --header "X-Forwarded-For: 32.32.32.32" http://127.0.0.1:8080
7) Note the logs output this address if you are unproxied
8) If you are proxied, restart plack using a command like below, where the ip you see in the logs ("REAL IP) is what you put in the koha conf:
<koha_trusted_proxies>172.22.0.1 1.1.1.1</koha_trusted_proxies>
9) Restart all the things!
10) Repeat step 6
11) You should now see "REAL IP: 32.32.32.32" in the plack logs as the remote address in your plack-error.log logs!
12) Disable plack so you are running in cgi mode, repeat step 6 again
13) You should see "REAL IP: 32.32.32.32" as the remove address in your opac-error.log logs!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
directory _LOG_DIR_/logs does't exists.
All other log4perl -logs are out to _LOG_DIR_
Thank you for the good work Ere!
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Splits Session to GenericSession and ZebraSession where Generic supports any
search backend via the SearchEngine classes and Zebra maintains the direct
channel to the Zebra server.
Adds config files required for mapping BIB-1 attributes to Koha search fields
and SRU indexes to BIB-1 attributes.
Adds PODs.
Sponsored-by: National Library of Finland
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This creates a new daemon, misc/z3950_responder.pl, which can respond to
Z39.50 requests. By default, it just proxies searches to Zebra.
If desired, however, it can also add a subfield to the item tags on
outgoing records with a textual description of the item's status
(checked out, lost, etc.). This is useful for certain ILL systems. These
strings can be translated using the 'Z3950_STATUS' authorized value.
Test plan:
1) Start the Z39.50 server using `perl misc/z3950_responder.pl`.
2) Connect to the server using `yaz-client 127.0.0.1:9999/biblios`.
3) Run a search, such as `find @attr 1=1016 book`.
4) Fetch the results both one at a time with `show 1` and in a batch
using `show 1+5`.
5) Turn on MARCXML using `format xml` and `elements marcxml`, and
verify that the records are still correctly fetched.
6) Enable the item status subfield by restarting the server with the
option `--add-item-status=k`.
7) Search for and fetch records, and verify that a $k subfield is
added to the item tags as appropriate. It should show some
combination of "Checked Out", "Lost", "Not For Loan", "Damaged",
"Withdrawn", "In Transit", or "On Hold" as appropriate, or
"Available".
8) Add an authorized value named "Z3950_STATUS" with any of the keys
"AVAILABLE", "CHECKED_OUT", "LOST", "NOT_FOR_LOAN", "DAMAGED",
"WITHDRAWN", "IN_TRANSIT" or "ON_HOLD", and verify that their
descriptions are used instead of the default values above.
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Stefan Berndtsson <stefan.berndtsson@ub.gu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Missing installer for debian packages.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Johanna Raisa <johanna.raisa@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The example SIP config file in Koha is kind of a kitchen sink document where
all available SIP2 options should be demonstrated.
The allow_empty_passwords flag should be included in it.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should be able to set system preference overrides for SIP in a
similar manner that we do in Apache. It would be great if we could
specify those overrides on both a config level, and login level basis.
Test Plan:
1) Apply this patch
2) Start your SIP server
3) Enable the syspref AllFinesNeedOverride
4) Find or create a patron with a small fine ( less than noissuescharge )
5) Attempt to check out an item to the patron, it should fail
6) Add the global syspref override from the bottom of the example SIP config file
7) Restart your SIP server
8) Attempt to check out an item to the patron again, this time it should work
9) Now, add the login level syspref override section as it appears in
the eaxmple SIP config file. Make sure to add it to the login you are using
10) Attempt to check out another item to the patron, this time is should
again fail
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like to limit the amount of personal information a SIP server sends
to arbitrary parties on a per-login basis.
Test Plan:
1) Add a new key/value pair to one of your existing login stanzas in your SIP config file
For example: hide_fields="BD,BE,BF,PB"
2) Restart SIP
3) Send a SIP message that would normally return those fields ( in this example, a Patron Information Request )
4) Note the response has had those fields removed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Davis <tubaclarinet@protonmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Add a record with a unique publisher "Supercalifragilistic" in the
264 b field
2 - Search for the value
3 - Record not found
4 - Apply patch (may need ot copy the .xml file into koha install)
5 - Reindex all the things
6 - Search for the value
7 - Success!
Signed-off-by: Felicia Martin <felicia.martin@dncr.nh.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If the alternative mana KB server URL in etc/koha-conf.xml is used it
causes an error message like 'malformed JSON string, neither tag,
array, object, number, string or atom, at character offset 0 (before
"<html>\r\n<head><tit...") at /usr/share/perl5/JSON.pm line 171.' when
submitting an account creation request, and the account creation
request fails.
This patch updates the alternative mana KB server URL in
etc/koha-conf.xml from http://mana-test.koha-community.org to
https://mana-test.koha-community.org (the URL should start with https
instead of http). If the updated URL is used the account creation
request succeeds without causing any error messages.
To test:
1) Add <mana_config>http://mana-test.koha-community.org</mana_config> to
/etc/koha/sites/<instancename>/koha-conf.xml (see etc/koha-conf.xml
in the Koha code repository for an example of where to add this;
<instancename> if using koha-testing-docker is kohadev).
2) Clear memcached and restart services so that the changes to your Koha
instance configuration are recognised (if using koha-testing-docker
run flush_memcached and then restart_all).
3) From the staff client home page go to Koha administration >
Additional parameters > Share content with Mana KB.
4) Enable content sharing: change 'Use Mana KB for sharing content' to
Yes and press Save.
5) Enter your first name, last name and email address in the Configure
Mana KB section of the page and then click on 'Send to Mana KB'.
6) An error message is displayed, this may be something like:
'malformed JSON string, neither tag, array, object, number, string
or atom, at character offset 0 (before "<html>\r\n<head><tit...") at
/usr/share/perl5/JSON.pm line 171.'
7) Change the mana server URL to https://mana-test.koha-community.org
(see step 1), and repeat steps 2, 3 and 5.
8) Instead of an error message you should get 'You successfully created
your Mana KB account. Check your mailbox and follow instructions.'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Define a matching rule for authorities on field 001 index Local-Number
2 - In koha-conf.xml raise the zebra_loglevels
<zebra_loglevels>none,fatal,warn,request,info</zebra_loglevels>
3 - Export some authorities using the tools->export data
4 - Import those authorities
5 - Note no matches found
6 - View the zebra output log, you should see lots of error 114
7 - Apply patch
8 - Copy the indexdefs files to the installed versions
9 - Reapply matchign rules to staged files
10 - Matches should now be found
11 - Logs should not have errors
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
'Static' is the default value of Search::Elasticsearch and for a good
reason : it works in most cases, unlike the 'Sniff' option
To test:
1 - Apply patch
2 - Edit koha-conf.xml
3 - Add '<cxn_pool>Static</cxn_pool>' to the elasticsearch stanza
4 - Restart all the things!
5 - Reindex ES, it works
6 - Set SearchEngine to ES, try searching
7 - It works!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Add some word with character "ů" into metadata, for example author "Martinů, Bohuslav"
2) Try to search it with "Martinu" and you'll see you can't find it
3) Apply the patch
4) Copy file etc/zebradb/etc/word-phrase-utf.chr to your /etc/koha directory
sudo cp etc/zebradb/etc/word-phrase-utf.chr /etc/koha/zebradb/etc/
5) koha-zebra --restart kohadev
6) koha-rebuild-zebra -f kohadev
6) try to search "Martinu" again - you should be able to find your record
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Now that we have Koha::Logger, we should use it in our SIP server. This
has the potential to make debugging SIP issue much easier. We should add
the userid for the sipuser to the namespace so we can allow for separate
files per sip user if wanted.
Also modifies the log4perl.conf to lazy-open filehandles to log files,
so the same config can be used with log-files needing different
permissions.
Test Plan:
1) Apply this patch set
2) Update the modififed log4perl.conf to your system
3) Restart your sip server
4) Tail your sip2.log, run some queries
5) Note you still get the same output messages as before, with the
addition of the ip address and username ( if available )
prefixing the message.
Based on original patches by Kyle Hall and additions by Olli-Antti
Kivilahti.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a CT field to be sent, even if that field is empty. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option ct_always_send for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP, which will not be transferred
5) Note the response contains a CT field with no value
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a checkin success to return a CV field of the value "00" rather than no CV field at all. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option cv_send_00_on_success for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP
5) Note the response contains a CV field with the value '00'
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
