This patch ensures that the global maxreserves preference is enforced
when staff members place hold requests.
For example:
Create 3 items to place holds on. Set the circulation rule to allow 50
holds for all items. Set maxreserves to 2. Place a hold on 3 different
items. On the third item, it will give a warning, but you can still
place the hold. Despite what the circulation rule is set for (which is
only a specific case rule), maxreserves is a global rule and
should stop this from happening, not just give a warning.
Test Plan:
1) Reproduce the bug by following the steps above
2) Verify the bug exists
3) Apply this patch
4) Verify the librarian cannot place the hold now
5) Enable AllowHoldPolicyOverride
6) Verify the librarian can forcefully place the hold
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 12197: (follow-up) rename variable for greater clarity
"maxreserves" was referring both to the system preference and to the
condition of having exceeded the number of hold requests allowed.
This patch renames a variable to remove the ambguity.
Test plan:
* Same as the main patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Librarians should be warned that a patron is restricted when placing
holds, as they are warned that a patron's acount has expired.
Test Plan:
1) Apply this patch
2) Add a restriction for a patron
3) Attempt to place a hold for that patron
4) Note the notice at the top notifying you that the patron is restricted
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a patron owes more than the system preference maxoutstanding in fees
and fines, the patron will be unable to place holds via the opac.
However, a librarian placing a hold for a patron is not even warned!
Test Plan:
1) Apply this patch
2) Set maxoutstanding to 1.00
3) Find a patron owing more than 1.00
4) Attempt to place a hold
5) Note the warning that the patron owes money
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This bug removes deprecated C4::Dates from reserve/request.pl
To test:
- Apply patch
- In staff client, search a biblio and try to put a hold for a borrower (Home > Catalog > [Some Biblio] > Place a hold to [Some biblio])
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Create a new record in Cataloguing
2) When done, instead of adding an item to the record, click on the Holds tab in the left nav
3) Notice warns
4) Apply patch and refresh page
5) Click on Holds tab again
6) Notice warns are gone and page still works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Warns disappear; note that the display of the error message is still ugly.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the staff client we had still some remains referring to the
constraint types.
Also touched one comment line from SIP.
Test plan:
Add a hold in the staff client.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This way ILS-DI HoldItem and HoldTitle services also benefit from this
check
Test plan:
1/ Define some default holds policies by item type in
/admin/smart-rules.pl
2/ Use ILS-DI HoldItem service and check that those rules are respected
3/ Check that staff and opac hold behaviour is unchanged regarding
these rules.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script. No regressions found,
improves the ILS-DI HoldItem response.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The due dates should be displayed as due dates :)
i.e not displayed with 23:59
On the way, this patch fixes the sort on the info column.
The column is now sorted using the due dates
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the case where only 1 result is returned by the search, the
borrowernumber should be passed correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Important note: This will modify the UI.
The patron list will now be displayed in a table (instead of a select).
Test plan:
1/ Place a hold on a record
2/ Search for a patron
3/ Select a patron and submit
4/ The hold workflow should continue as previously
No behavior changes should be observed.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the way CanBookBeReserved() and CanItemBeReserved() return error
messages and how they are dealt with in the templates. This change makes it possible
to distinguish between different types of reservation failure.
Currently only two types of errors are handled, all the way to the user, from the CanItemBeReserved():
-ageRestricted
-tooManyReserves which translates to maxreserves
#############
- TEST PLAN -
#############
((-- AGE RESTRICTION --))
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You get a notification, that placing a hold on ageRestricted material is
forbidden. (previously you just got a notification about maximum amount of reserves reached)
((-- MAXIMUM RESERVES REACHED --))
0. Set the maxreserves -syspref to 3 (or any low value)
STAFF CLIENT AND OPAC
1. Make a ton of reserves for one borrower.
2. Observe the notification about maximum reserves reached blocking your reservations.
((-- MULTIPLE HOLDS STAFF CLIENT --))
3. Observe the error notification "Cannot place hold on some items"
((-- MULTIPLE HOLDS OPAC --))
1. Make a search with many results, of which atleast one is age restricted to the current borrower.
2. Select few results and "Place hold" from to result summary header element.
(Not individual results "Place hold")
3. Observe individual Biblios getting the "age restricted"-notification, where others can be
reserved just fine.
Updated the unit tests to match the new method return values.
t/db_dependent/Holds.t & Reserves.t
Followed test plan. Works as expected and displays meaningful messages for the reason why placing a hold is not possible.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When placing a new hold, the listed priority for the hold will be
incorrect if there are any holds with items in transit ( i.e. found = T ).
Test Plan:
1) Place 3 holds on a record with at least 2 items
2) Fill one hold so it is marked as waiting
3) Fill on hold so it is marked as in transit
4) Begin placing a new hold
5) Note the expected priority would be 2, but is actually 3
6) Apply this patch
7) Reload the patch, now the expected priority shows correctly
Signed-off-by: Coralie Barsacq <c.barsacq@mairie-laciotat.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Re-add the system preference maxreserves.
All the code using maxreserves is still in place. Though it
is not used in the Reserves module, it is used in all the
scripts where holds are placed.
Also adds a check so that a borrower cannot exceed the maximum
number of allowed holds by using the multi-hold feature via
the opac.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Set maxreserves to 3, set opactheme to bootstrap
4) Log into the opac as a patron
5) Place 3 holds
6) Attempt to place a 4th hold
7) Note you get an error message and cannot place a forth hold
8) Delete two of those holds
9) Attempt to place 3 or more holds as a multi-hold
10) You should see a warning that you cannot place this many holds
11) Try to anyway
12) You should see an alert to tell you to reduce the number of holds
you are placing.
13) Reduce the number for holds you are placing to 2
14) Your holds should now be placed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an item needs to be transferred to fill a hold, the hold will be
listed as 'Waiting to be pulled" while it is in transit.
Test Plan:
1) Place a hold for pickup at another library
2) Check in the item, confirm the hold transfer
3) View the holds for that record ( request.pl )
4) Note the priority is "In transit" and the status is 'Waiting to be
pulled".
5) Apply this patch
6) Reload the holds page
7) Note the status is now "Item being transferred to $branch"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ CURRENT_DATE() is a MySQLism and should be replaced with CAST(now() AS
DATE).
2/ The date formatting should be done in the template (using the TT
plugin).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before bug 9788 the alldates parameter of GetReservesFromItemnumber was
actually not used in the codebase.
The first patch of bug 9788 did change that and passed true by default.
But a closer look revealed that we do not really need it.
The parameter is removed by this patch; the SQL statement is slightly
adjusted: if reservedate<=now or a waitingdate is filled for the
requested itemnumber, GetReservesFromItemnumber will return the reserve.
This includes so-called future waits: a future hold that has been confirmed
ahead of time with pref ConfirmFutureHolds > 0 days.
Note that future item-level holds are not really interesting to return; this
just corresponds to original behavior. Future next-available holds are not
in view at all; they do not contain an item number.
Test plan:
Actually, the test plan of the first patch is valid. But for completeness I
repeat it here:
[1] Enable future holds and set ConfirmFutureHolds to 2 days.
[2] Place a future next-available hold for 2 days ahead.
[3] Check item status on catalogue detail. Available? That is fine.
[4] Confirm the future hold by checking it in. ('future wait')
[5] Look at item status again on catalogue detail. Must be Waiting now.
[6] Switch to OPAC and login as another opac user. Goto Place a hold.
[7] Check item status with item level hold info. Is it waiting?
[8] Try to place hold in staff, check item level status again. Waiting?
[9] Make a transfer for the item. Switch branch. Check hold status on
Transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes GetReservesFromItemnumber also returns the waiting
date and removes some repeated code.
Improves item status display on catalogue detail, when placing a hold at
opac-reserve and in staff, and on transfers to receive form.
This patch builds on work from reports 9367 and 9761.
Test plan:
Place a future next-av. hold (enable future holds prefs), say 2 days ahead.
Check item status on catalogue detail. Nothing to see.
Enable ConfirmFutureHolds by inserting a number of days, say 2.
Confirm earlier hold by checking it in. Look at item status again on detail.
Switch to other opac user. Try to place a hold again. Check item status with
item level hold info. Try to place hold in staff, check item level status.
Make a transfer for that item. Switch branch. Look at transfers to receive.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On intranet, when placing a hold requst:
If borrower has reached the request limit, a warning should appear :
Cannot place hold
* Too Many Holds: TEST has too many holds.
This works when quota defined in circulation rules is reached but not
when limit specified in syspref maxreserves is reached, in case this
limit is lower than the one defined is circulation rules.
This is because template param maxreserves is set twice, this patch
corrects this bug.
Also moves warnings and messages conditional variable from Perl to
template because it cause the same bug as for maxreserves.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
One just needed parentheses, but the one on line 219 reflects
a slightly deeper problem -- it's running patron checks when
a patron hasn't actually been supplied.
To test:
[1] From the staff interface, bring up a biblio that has no
holds on it, then go to the holds tab.
[2] Verify that the Apache log has no new warnings containing:
request.pl: Use of uninitialized value in string eq at /home/gmc/koha/reserve/request.pl line 219
or
request.pl: Use of uninitialized value in string eq at /home/gmc/koha/reserve/request.pl line 488
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Let the template take care of generating the display.
Lets at least part of request.pl be more succinct.
To test, place a hold and search for the patron using a partial name.
You should get a dropdown select list of patrons and be able to select
the patron to hold for from there.
The functionality should remain unimpaired after this patch is applied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If IndependantBranches is enabled, all holds for an item display the
currently logged in library no matter what, and modifying the holds will
set all pickup locations for all the holds to that logged in library!
Test plan:
1) Disable IndependantBranches
2) Place 3 holds on a record with 3 different pickup locations
3) Enable IndependantBranches
4) Refresh the holds page for that record, all the holds show now
show a pickup location of the logged in branch
5) Modify the order of the holds
6) Disable IndependantBranches
7) Refresh the holds, verify the holds all now have a pickup
location of the logged in branch
8) Apply the patch
9) Repeat steps 1-3
10) Refresh the holds page for that record, all the holds should
now show the correct pickup branch, but it cannot be changed
as IndependantBranches is enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In my tests the above test plan only worked out if my user
had no superlibrarian permission. But then behaviour for
independentbranches off/on was all correct.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This follow up reinstates or add check for undef returned
by C4::Context->userenv, only where previous patch touch
code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch replace use of CGI::scroll_list() to show list of branches.
In two files, marc21_linking_section.pl and unimarc_field_4XX.pl,
the scrolling list is created but not used in the template file,
so the code is removed.
Also minor renaming/normalizing of variables.
To test:
1) Install with some branches, records and patrons
2.1) Select a record, click 'Place hold', select user,
there is a library pull-down next to 'Pickup at:',
list is ordered case sensitive
2.2) Go to Reports > Average loan time,
next to Library is a pull-down,
list without order
2.3) Go to Reports > Catalog by item type,
next to 'Select a library' is a pull-down,
list is ordered case sensitive
2.4) This is tricky, go to Reports home,
change last part of URL 'reports-home.pl' with
'manager.pl?report_name=issues_by_borrower_category'
(can't find a direct link), next to 'Select a library'
is a library pull-down,
list without order
2.5) Edit/Add a patron, on section 'Library management'
there is a library pull-down, case sensitive
2.6) OPAC, as logged user, make a suggestion or hold,
there is library pull-down, correct order
3) Apply the patch
4.1) Repeat 2.1), correctly ordered list
4.2) Repeat 2.2), correctly ordered list
4.3) Repeat 2.3), correctly ordered list
4.4) Repeat 2.4), correctly ordered list
4.5) This is a bit more work
There are 3 possible situations to test:
A) No branches, must show a message that are no
libraries defined
B) New patron, must show a correctly ordered
list of branches, current branch selected
C) Edit patron, must show a correctly ordered
list of branches, patron branch selected
4.6) Small changes on variable names, so retest 2.6)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- the dateformat value is send to all templates (from
C4::Auth::get_template_and_user)
- remove all assignment of dateformat in all .pl files
- the DHTMLcalendar_dateformat variable is unused
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed conflicts:
- opac/sco/sco-main.pl
- reports/acquisitions_stats.pl
- tools/cleanborrowers.pl
All tests pass, perlcritic problems appeared in some files
before and after these patches were applied.
Checked sorting in following pages:
- acqui/addorderiso2709.tt - list of staged imports in acq
- acqui/histsearch.tt - sorting of dates in acq search result list
- acqui/invoices.tt - billing date in list of invoices in acq
- acqui/lateorders.tt - list of late orders in acq
- acqui/ordered.tt - ordered titles and estimated costs for a fund
- acqui/parcels.tt - receive shipment page
- acqui/spent.tt - received titles and actual costs for a fund
...
- serials-search.tt - subscription search result list
...
- opac/sco/sco-main.tt - due dates in list of checked out items
- reports/acquisitions-stats.tt - date searches, display of dates
- tools/cleanborrowers.tt
- tools.holidays.tt - different views of dates library is closed,
adding dates
Checked dates display according to system preference everywhere and
searching, entering dates etc. still worked as expected.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preference to turn on/off this feature.
By default the system allow the patron to place holds even if it is in his possession.
Script to place holds check if the system preference is off and if patron has at least one item to block holds.
Messages to say that are already in patron possession added to templates.
Method to check if patron has one issue from one record added to C4::Circulation
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
For request.pl, there are two ways to suspend a reserve, either
by using the 'suspend' button for an individual reserve, or by
using the 'Update hold(s)' button with suspend until dates set.
If the 'suspend' button is used, any date in the 'suspend until'
field is ignored. This commit fixes this issue.
* Add suspend_until date to suspend button link via jquery
* Add optional date to ToggleSuspend()
* Add KohaDates plugin where necessary
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
passes tests, tested:
* suspend all holds from circ.pl
* suspend one hold from circ.pl
* suspend all holds from moremember.pl
* suspend one hold from moremember.pl
--- NOTE: clicking suspend all holds without setting a date will mean the holds must be manually unsuspended. I'm not sure this is intentional?
* suspend a specific hold using the in-table button on reserves
* suspend a specific hold using the "update hold" button
500 error is gone.
http://bugs.koha-community.org/show_bug.cgi?id=8084
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
Fixes the patron name sorting when placing holds.
Testing - See Bug 5674.
Create two patrons. One named SMITH, THOMAS and the other Smith, John.
Search for an item to place on request. Do a patron search for Smith.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Confirm both the original bug and the fix, sorting is correct now.
Patch does not change status of tests - prove t t/db_dependent xt no different from master.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Replaces all four usages of GetMemberDetails with GetMember, since none of the
hashref fields used were anything other than those in borrower table, which GetMember
returns.
To Test:
1. Apply patch
2. Go to reserve/request.pl; the page should load without error
3. Search for a cardnumber: the page should load without error
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removed SearchMembers() and replaced with more generic Search()
Amended Search() to try cardnumber first
Replaced SearchMembers() calls with Search()
Replaced SELECT with Search() where appropriate
C4::SQLHelper:
- added support for '' key for search filter.
- when passing an array to filter, join with OR (rather than AND)
- added support for key => [val1, val2] in filter
- did not document - there was no input documentation to start with,
and SQLHelper should be replaced with something better anyway
Signed-off-by: Liz Rea <lrea@nekls.org>
(again - testing merge issue)
The functionality of the patch seems to be maintained with Biblibre's changes.
I tested the following:
Extended attribute searching: works
3 part name searching: works
2 part name searching: works
1 part name searching: works
From:
mainpage.pl
members-home.pl
Patron search limited by branch: Works
Patron search limited by patron category: works
Ordering by cardnumber instead of surname: works
The "Check Out" field in the masthead.
Circ Autocomplete is not reliably functional at this time, but the problem appears to predate this patch.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
use C4::Koha was loaded only to call C4::Koha::get_infos_of in get_branchinfos_of
the sub get_branchinfos_of was used nowhere
(checked with "grep -R get_branchinfos_of *")
only one reference was made to get_branchinfos_of, in reserve/request.pl, but the sub was not used in fact (maybe removed previously & silently)
This patch removes sub get_branchinfos_of and use C4::Koha in C4::Branch, as well as the reference in request.pl and the t test
The patch doesn't remove use C4::Branch in reserve/request.pl, as it's still used for other subroutines.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Display links to parent biblios, show linked items in holdings, allow holds on
linked items. This uses MARC to maintain relationships.
Sponsored by the Mississippi Department of Archives and History and RapidRadio
Solution. Originally developed by Savitra Sirohi and Amit Gupta at OSSLabs, with
UNIMARC support added by Zeno Tajoli. Commits squashed and merge conflicts
resolved by Chris Cormack from Catalyst. Respect for NORMARC and some small
framework portability fixes made by Jared Camins-Esakov of C & P Bibliography
Services.
IMPORTANT NOTE: A bug in the 773 coding for MARC21 was corrected from the
original OSS Labs code. The 773s generated by the pre-release code did not have
the first indicator set to '0', which means that they were not supposed to
display. Going forward, the first indicator will be set correctly, but existing
records created with this code will no longer appear (they appeared before only
due to another bug). To correct this, you could globally (or, to make sure you
only modify records created with the Analytics tool, for records with 773$0)
change the first indicator of the 773 from blank to '0'.
== Background ==
An analytic record for an item is a more detailed, monographic biblio for an
item attached to a serial record . This is often used for special issues of a
journal that are released as books on their own (assigned an ISBN, as well as an
ISSN/volume/issue). It is important for researchers to be able to search for
these items both as issues of the serial, and as monographs. It is equally
important for the library to not have duplicate item records for the item in
question to have to keep synchronized.
== Establishing relationships ==
Analytical records are connected to items belonging to parent or host
bibliographic records. This can be accomplished by:
* From an analytical bibliographic record linking to an host item by providing
the item barcode as input
* From a host item by using option "analyze", this creates a new empty
bibliographic record with field 773 (MARC21) populated
* Running a new CLI script that establishes a relationship between the
analytical record and the host item identified by the barcode in the
analytical record's 773$o (MARC21)
== Connecting Records ==
The relationships are maintained in the MARC records, we have not used database
tables at all.
== MARC Representation ==
In MARC21/NORMARC we have used:
* 773$9 to store the Koha item number of the host item
* 773$0 to store the Koha biblio number of the host bibliographic record
The above fields are used to display the relationships in various screens in the
OPAC and the staff interface. Additionally, when populating field 773 with host
item's details, we have used following MARC 21 mapping:
* 'a' <= 100/110/111 $a (author main)
* 'b' <= 250$a (edition)
* 'd' <= 260$a, 260$b, 260$c (place, publisher, year)
* 'o' <= barcode
* 't' <= 245$a (title)
* 'w' <= (003)001 --> if no 001 is available, we can populate biblionumber
* 'x' <= 022$a (issn)
* 'z' <= 020$a (isbn)
In UNIMARC, this code uses:
* 461$9 to store the Koha item number of the host item
* 461$0 to store the Koha biblio number of the host bibliographic record
When populating field 461 in UNIMARC, the following mapping is used:
* 't' <= 200$a (title)
== Treatment of Holds ==
A key requirement was to allow holds to be placed on host items from the
analytical record. We have accomplished this by allowing holds on specific
copies only. Biblio level holds are not allowed. This ensures that holds are
placed on specific items that are relevant to the analytical record.
== Deleting host items with linked analytical records ==
As we have not used database tables to maintain relationships, we had to use
search to find out if any linked analytical records are present. If 1 or more
analytical are present, we do not allow deletion of items. This is similar to
what we see when we try to delete authority records.
== Importing analytical records ==
Analytical records can be imported using bulkmarcimport or the GUI tools. The
new CLI script can be executed after the import to establish relationships with
host items. The script will establish relationships using the host item's
barcode, the barcode must be present in 773$o of the analytical record.
== What if there are two or more copies of the host item? ==
The current design will require that there be two host (773) fields, one for
each copy.
== What if there is no barcode available for the host item? ==
It is still possible to establish a relationship, by populating 773$9 with the
host's item number. However the CLI script uses barcode in 773$o to establish
relationships so it won't work where barcodes are unavailable. Also from an
analytical record, it is possible to establish a relationship to a host item by
providing the barcode as input, this option will not be available as well.
Commits that added the following features were squashed by Chris Cormack (this
is not a list of every commit):
* Display links to host records from biblio detail screens
* Support for UNIMARC, respecting the system preference 'marcflavor'
* Support holds from the OPAC
* Ability to link to items belong to host records from a analytical record
* Display items belonging to host records in the moredetail page
* Ability to edit items belonging to host records, also ability to delink from
them
* Move get host items code into a C4 routine, also calling the new routine in
related perl scripts
* Move host field population to a C4 routine, all changes in pl files to call
new routine
* Allow only specific copy holds for analytical records plus changes to use new
C4 routines
* Support for holds on items linked via host records
* Storing bibnumber and itemnumber in subfields 0 and 9, plus other mapping
changes
* New command line script that establishes relationships between analytical
records and host items and bibs. The script looks for host field (MARC21 773)
in records, and based on barcode in subfield 'o' populates host bibnumber in
subfield '0' and host itemnumber in subfield '9'. The script can be run after
an import of analytical records, it can also be run in the crontab to maintain
the relationships
* Ability to create analytical records from items, to view linked analytics, and
prevent deletion of items that have linked analytics
* New template for catalogue/detail.pl (NOTE: not a new template file, just a
new way of displaying analytics), template displays linked analytics and
allows creation of analytical records
* New zebra index for item number in host fields. This index will be used to
display links to analytical records from host records
* Display title of host record instead of the phrase host record
* Using detail.tmpl for analytics tab instead of a new template file
* Improved qualification info prepration in Prephostmarcfield
* Check for linked analytics before deleting item
* Display link to host record and more meaningful anchor text for edit item link
* Analytical record: Unimarc index in record.abs and help in
create_analytical_rel.pl
* Adding a sys pref that controls display of options to create analytical
relationships
* Add host entry in XSLT stylesheet in staff item detail
* Added host record support to OPAC detail XSLT
* Adding 773$0 and 773$9 to all frameworks
* Adding 773 subfields 0 and 9 to default marc framework via updatedatabase.pl
* Display create analytics and used in links in catalog detail
* Fixed problem where analytical records not showing in OPAC search results
because GetMarcBiblio now needs a flag to add item records
* Fixed problem where analytics count was set to 1 for all records, not just
those with analytics
* Fixed catalogue detail page not to show analytics counts if count is 0
Conflicts:
installer/data/mysql/updatedatabase.pl
koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/addbiblio.tt
kohaversion.pl
Co-author: Savitra Sirohi <savitra.sirohi@osslabs.biz>
Co-author: Zeno Tajoli <tajoli@cilea.it>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This fixes a regression introduced by Bug 6526 that told you someone
already had a reserve if you attempted to move their ordering in the
hold queue.
(note: it also cleans a host of trailing whitespace errors that were in
that file)
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previously it used the cardnumber, which caused numerous issues if your
users don't have card numbers.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a check to make sure that the item is actually unavailable before requiring the override
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
AllowHoldPolicyOverride should be able to override AllowOnShelfHolds, as well as other possible reasons for blocking a hold. Before, this only
allowed override of branch policies set in Circ Rules.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds a check to confirm that the maxreserves syspref actually has a value before
using it. Also fixes an off-by-one error in the maxreserves calculation that
would allow librarians to place maxreserves + 1 holds for patrons.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Previous commit modified checks for the item-level_itypes preference
to look for a different variable name but didn't update where that
variable is set in Auth.pm.
Other scripts perform a direct check of item-level_itypes and must
continue to use the name of the variable in the database.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch provides a universal override to any hold policy if the AllowHoldPolicyOverride is set.
Amongst other overrides, this patch allows missing, non-checked out items to be placed on hold even with AllowShelfHolds turned off.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adding two new granular permissions under 'reserveforothers,' place_holds
and modify_holds_priority. If a user does not have modify_holds_priority
permission, the option to change the priority of a hold is hidden.
Revised patch includes changes to mandatory data files including
properly translated fr-FR version.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
* export C4::Reserves::CancelExpiredReserves
* rename misc/cronjobs/cancel_expired_reserves.pl
to misc/cronjobs/holds/cancel_expired_holds.pl
* added cancel_expired_holds.pl to example crontab
* fix staff crash if AllowHoldDateInFuture is on
* expirationdate is now nullable instead of relying
on 0000-00-00
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This is a much improved re-implementation of the reserves updates from dev_week.
Less new code has been added, and more existing functions are used instead of adding new ones.
The 'Lock Hold' function has been removed due to it not working as intended.
[RM note for documentation: this adds the following features:
* ability to specify an expiration date for a hold request
when placing it via the staff interface or OPAC
* daily batch job to cancel expired holds
* nice interface to change the priority of hold
requests for a bib in the staff interface]
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Adding finedays and reservesallowed and renewalsallowed management in smart rules
Adding Clone Rules
Adding CanBookBeReserved and CanItemBeReserved in C4::Reserves
Manage Reservesallowed in opac and staff interface
Manage renewalsallowed in C4/Circulation.pm
Update Database follow
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Squashed commit of the following:
commit e9dd6e1dee03fe3503f7995b57510f9edfe6b333
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Wed Aug 19 08:14:53 2009 +0000
Version number
commit df3ee5473e79b760a91c62b96d7ce19229e0fd27
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Wed Aug 19 08:08:11 2009 +0000
French systempref
commit c4b036e4e43947d7d1fb9f2e18e460788cb4e1ec
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Wed Aug 19 00:25:33 2009 +0000
Code to update the database, and updating the sysprefs.sql
commit f74b942c24d5e9c33a4ec0e5ac706a0e347eb1a7
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Tue Aug 18 02:07:22 2009 +0000
Now hides the name on the detail screen too
commit 53c80dbef88e360a4bbb78ecff3a6ca6ec401398
Author: Chris Cormack <chrisc@catalyst.net.nz>
Date: Tue Aug 18 01:35:19 2009 +0000
Allowing the librarians to choose to hide the borrowers name on holds
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This adds to the interface and code the ability to set the reserve date when
requesting a hold.
Resubmit. Sorry, I formatted it from the wrong branch.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Improves previous patch through the use of GetBranchesLoop. Also adds highlighting to the Existing holds table.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Before this patch, we used to test for flags == 1, which was wrong when patron had all privileges.
This patch just adds a %2 to check that patron has superlibrarian privilege, and maybe something else we don't care.
I think I fixed it everywhere except in acquisition, that will be addressed by BibLibre new acquisition module.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Coding by Rick Welykochy <rick@praxis.com.au>
[1] Three new system preferences to enable particular
bib record views in the staff interface:
viewMARC
viewLabeledMARC
viewISBD
Implements enhancement 2642.
[2] New button in the regular and cataloging search results
pages in the staff interface to allow the operator to redo
the search against Z39.50 targets instead of the Koha database.
[3] Added copyright date and edition to cataloging and Z39.50 search results.
Implements enhancement 2640.
Feature sponsored by MassCat.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch allows staff users to request reserves on multiple
items at one time.
Added checkboxes, select-all, clear-all, and place-hold button to
staff search results page. Place-hold button will only appear if
the user has permission to place holds for others. Item-level
Place-Hold button will not appear for multiple holds, nor will
the vertical detail menu.
Patron input page now shows multiple items, if applicable.
Hold confirmation page shows results for multiple items, if
applicable. Those which cannot be reserved are highlighted and
are excluded from the reservation. The reservation is placed at
the biblio number (i.e. next available) level.
Fixed display of item type.
Removed side menu for multiple items; removed item-oriented button for multiple items.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Overriding items.itype from biblioitems.itemtype
is needed only with item-level_itypes is OFF.
[LL bug 321]
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds holds policy creation support to smart rules and read support to
C4/Circulation.pm, and the two reservation pages. It also adds a system
preference, AllowHoldPolicyOverride, to control whether the staff can override
these policies.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a new function, getitemtypeimagelocation, that returns the image
unmodified for absolute urls and returns the proper intranet or opac path
otherwise. It also updates all of the relevant files to use that function.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
When placing a hold request from the staff interface,
now correctly indicate if the patron account has expired.
Prior to this patch, would warn that the account
had expired even when the expiry date is in the future,
and vice versa.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Prior to this fix, changing the priority of any hold requests
in the queue of requests for a bib would convert
all item-level requests to title-level requests.
As part of this fix, improved display of the holds queue
so that item-level and bib-level requests can be more
clearly distinguished.
Documentation note: new screenshot of list of requests for
a bib in the staff interface.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Fixed rules for determining whether an item is
available for an item-level hold request. Create a
new function in C4::Reserves, IsAvailableForItemRequest(),
that checks whether an item is potentially available for
an item-level hold request.
An item is considered available if:
* it is not lost AND,
* it is not marked not for loan AND,
* it is not withdrawn AND,
* it is not damaged (unless the AllowHoldsOnDamagedItems syspref is ON), AND
* it is not on loan (unless the AllowOnShelfHolds syspref is ON)
Preventing a hold request on withdrawn items is bug 1739, as is
the new preference on whether to allow holds on damaged items.
Removing the condition that an item cannot be requested if
it has already been requested by another patron is the topic of bug 1710.
Note that this patch does not change the behavior where if
independent branches is on and the canreservefromotherbranches
syspref is off, a staff operator is prevented from placing
an item-level hold request on an item from a different branch.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch should reduce the occurrence of the following
message in the error log:
Illegal Date '2008-3-14' does not match 'iso' format: yyyy-mm-dd
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The new tables have the same structure and constraints
as the tables they archive with the following exceptions:
* borrowernumber and biblionumber in old_reserves can be
NULL
* the FK constraints (e.g., for itemnumber) on old_reserves
set the child column to NULL if the parent row is deleted
instead of deleting the child row.
* there is no FK constraint on old_issues.branchcode, allowing
a branch to be deleted without changing archived requests.
Some miscellaneous cleanup was done as part of this patch:
* GetMemberIssuesAndFines (C4::Members) now uses bind variables
* fixed POD for GetMemberIssuesAndFines
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Moved following functions from C4::Biblio to
C4::Items:
GetItemStatus
GetItemLocation
GetLostItems
GetItemsForInventory
GetItemsCount
GetItemInfosOf
GetItemsByBiblioitemnumber
GetItemsInfo
get_itemnumbers_of
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
670 is primarily about the status of a biblio or item that's got a
hold on it ... specifically the 'in transit' and 'waiting' status.
It applies to the following pages.
* request.pl - tested
* detail.pl - tested
* circulation.pl - tested
* moremember.pl - tested
* opac-user.pl - doesn't show transit status, but only shows waiting
when item has arrived at the pickup library
* opac-detail.pl - doesn't show hold statuses
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Major Fix:
Fixing bug where 'expected' label existed for items that
were 'waiting'
Minor Cleanup:
Show correct statuses
Show itemtypes at correct levels depending on
global system preference
Display branch names, not branch codes
Adding in visibility option for 'canreservefromotherbranches' syspref
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
SANOP hadn't ported reserve to OPAC yet. that's why opac reserves were no more working.
I've fixed that, but it need more testing...
Signed-off-by: Chris Cormack <crc@liblime.com>
Abiding by Name Convention.
Using Members wherever it should be used.
Borrower is only used for borrower Categories.
+ GetBorrowersWhoHaveNeverBorrowed
and lists like that.
So this implies quite a change for files.
Sorry about conflicts which will be caused.
directory Interface::CGI should now be dropped.
I noticed that many scripts (reports ones, but also some circ/stats.pl or opac-topissues) still use Date::Manip.
- checkaccount and getborraccountno => GetBorrowerAcctRecord
Many changes in names,
some changes in function signature.
Will be detailed in a mail to kohadevel.
if this prefence is switched on: the document returned in another library than homebranch, the system automaticly transfer the document to his homebranch (with notification for librarian in returns.tmpl) .
switch off : the document stay in the holdingbranch ...
correcting bugs :
- comment C4::acquisition (not using in request.pl).
- correcting date in request.pl
-add the new call of function getbranches in request.pl
the intranet. The development was made on branch 2.2 by Arnaud Laurin from
Ouest Provence and integrated on HEAD by Pierrick Le Gall from INEO media
system.
New page reserve/request.pl taking a biblionumber as entry point.
New functions:
- C4::Biblio::get_iteminfos_of retrieves item informations for a list of
itemnumbers
- C4::Biblio::get_biblioiteminfos_of retrieves biblioitem informations for a
list of biblioitemnumbers
- C4::Biblio::get_itemnumbers_of retrieve the list of itemnumbers related to
each biblionumber given in argument.
- C4::Circulation::Circ2::get_return_date_of retrieves return date for a
list of itemnumbers.
- C4::Koha::get_itemtypeinfos_of retrieves the informations related to a
list of itemtypes.
- C4::Koha::get_branchinfos_of retrieves the informations related to a list
of branchcodes.
- C4::Koha::get_notforloan_label_of retrives the list of status/label for
the authorised_values related to notforloan.
- C4::Koha::get_infos_of is the generic function used by all get_*infos_of.
- C4::Reserves2::GetNumberReservesFromBorrower
- C4::Reserves2::GetFirstReserveDateFromItem
Modified functions:
- C4::Reserves2::FindReserves was simplified to be more readable.
The reservation page is reserve/request.pl and is linked from nowhere as
long as zebra is not stable yet on HEAD.
