Also adding a similar comment in C4::Installer.
No test plan, just documentation.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Disable the possibility for a borrower to cancel a reservation
which is either in a Transit or Waiting state.
This reproduce the behaviour seen on the OPAC.
Also replaces previous checks on the borrowernumber
since CanReserveBeCanceledFromOpac already checks this.
--------------------------------
Test plan (before patch) :
-Put a reserve for a borrower
-Try to cancel the reserve providing another borrowernumber as argument
-> Should fail and reply "RecordNotFound"
-> Reserve still appears in the list of holds.
-Try to cancel the reserve providing the borrowernumber the reserve is
for.
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Put a new reserve with a pickup branch != from the homebranch
-Transfer the item to the pickup branch (reserve status = Transit)
-Try to cancel the reserve (with proper borrowernumber)
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Checkout the reserved item in the pickup branch (reserve status =
Waiting)
-Try to cancel the reserve (with proper borrowernumber)
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
--------------------------------
Test plan (after patch) :
-Put a reserve for a borrower
-Try to cancel the reserve providing another borrowernumber as argument
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
-Try to cancel the reserve providing the borrowernumber the reserve is
for.
-> Should succeed, reply with "Canceled"
-> Reserve do not show up in the list of holds for the borrower
-Put a new reserve with a pickup branch != from the homebranch
-Transfer the item to the pickup branch (reserve status = Transit)
-Try to cancel the reserve (with proper borrowernumber)
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
-Checkout the reserved item in the pickup branch (reserve status =
Waiting)
-Try to cancel the reserve (with proper borrowernumber)
-> Should fail and reply "BorrowerCannotCancelHold"
-> Reserve still appears in the list of holds.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When using the ./misc/cronjobs/automatic_item_modification_by_age.pl -v
after setting up rules under Tools > Automatic item modifications by
age the script outputs several lines of warnings:
Use of uninitialized value in string eq at /kohadevbox/koha/C4/Items.pm
line 1864.
This is because even when there is no condition defined, modification
rule is stored with empty hash, like :
[{"substitutions":[{"field":"items.new_status","value":"0"}],"conditions":[{}],"age":"60","agefield":"items.dateaccessioned"}]
Test plan :
1) Go to Tools > Automatic item modifications by age
2) Create a rule with no conditions, just a substitution
3) Run misc/cronjobs/automatic_item_modification_by_age.pl -v
4) Check there is no warning
5) Edit the rule to add a condition
6) Run misc/cronjobs/automatic_item_modification_by_age.pl -v
7) Check the condition is applied
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adjusts the template/profiles to use the default of '0'
This should probably be NULL, and the columns foreign keys, this code
could use a further rewrite, but this should fix a long standing bug
To test:
1 - Using the fresh install, with all the sample data.
2 - Go to Home › Tools › Patron card creator › Templates
3 - New > Card template
4 - Save
5 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'profile_id' at row 1
6 - Edit an existing template
7 - Save
8 - Error: Can't bless non-reference value at /kohadevbox/koha/C4/Creators/Profile.pm line 89
9 - Create a new 'Printer profile'
10 - Save
11 - Error: DBD::mysql::st execute failed: Incorrect integer value: '' for column 'template_id' at row 1
12 - Apply the attached patch.
13 - Verify you can create a new 'Card template' and 'Printer profile' with no errors
14 - Verify you can edit and save both of the newly created objects above
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This just adds a top level set of POD headings to make the QA script
happy
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We already have 2 tables that are configurable, on acqui/basket and
reports/orders_by_budget.
This patch is modifying a bit the existing code to transfer the
responsability/logic to the KohaTable constructor instead of the
template that is creating the object.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the searchResuls code to pass through the pre-constructed branches and itemtype lookups
to XSLTParse4Display to avoid repeating this
It also updates getAuthorisedValues4MARCSubfields to fetch the values for mapped subfields and pass
then through to transforMarc4XSLT
Note that we currently blank invalid branches and itemtypes - I presrve this, we should open another bug
if we want to change this behaviour
Changes are covered by tests
To test:
1 - Perform searches in OPAC and staff client that return many records
2 - Use the 'Network' tab on the browser console (opened with F12 usually) to see the time taken
3 - Note the speed before the patch
4 - Apply patch
5 - restart all the things
6 - Note improvement in speed
**Note: The improvement is more drastic the more items per record, try adding large numbers of items to your search results to test**
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes a trivial warning caused by a parameter being
compared to a literal but not being defined. Doing a
$ git grep GetTagsLabels
shows the change is safe as the function is always called with a value
of either 0 or 1.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset introduces the Two-factor authentication (2FA) idea in
Koha.
It is far for complete, and only implement one way of doing it, but at
least it's a first step.
The idea here is to offer the librarian user the ability to
enable/disable 2FA when logging in to Koha.
It will use time-based, one-time passwords (TOTP) as the second factor,
an application to handle that will be required.
https://en.wikipedia.org/wiki/Time-based_One-Time_Password
More developements are possible on top of this:
* Send a notice (sms or email) with the code
* Force 2FA for librarians
* Implementation for OPAC
* WebAuthn, FIDO2, etc. - https://fidoalliance.org/category/intro-fido/
Test plan:
0.
a. % apt install -y libauth-googleauth-perl && updatedatabase && restart_all
b. To test this you will need an app to generate the TOTP token, you can
use FreeOTP that is open source and easy to use.
1. Turn on TwoFactorAuthentication
2. Go to your account, click 'More' > 'Manage Two-Factor authentication'
3. Click Enable, scan the QR code with the app, insert the pin code and
register
4. Your account now requires 2FA to login!
5. Notice that you can browse until you logout
6. Logout
7. Enter the credential and the pincode provided by the app
8. Logout
9. Enter the credential, no pincode
10. Confirm that you are stuck on the second auth form (ie. you cannot
access other Koha pages)
11. Click logout => First login form
12. Enter the credential and the pincode provided by the app
Sponsored-by: Orex Digital
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Notice the subtitle doesn't appear.
4. Apply patch and restart_all
5. Again try step 2.
6. Notice the subtitle appears alongside the title now.
7. Make sure it still sorts that column correctly.
Signed-off-by: shiyao <shiyao@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some new serial subscriptions and connect them to biblios that contain subtitles.
2. Do a serial search that will return your newly created subscription.
3. Click on one of those subscription to be taken to the subscription detail page.
4. Look at the main heading (h1) and the "Biblio:" line. Notice there is no subtitle in either place
5. Apply patch, restart_all, and reload the subscription detail page.
6. You should now see the subtitle on both the main heading (h1) and on the 'Biblio:' line.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some libraries have certain patron categories that can only do in house checkouts via SIP self check machines.
In these cases, the items should not be demagnetized since the items cannot leave the library.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces the AutoEmailOpacUser system preference with a new
AutoEmailNewUser preference. This makes the functionof the preference
clearer.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The error pages wrote a HTTP status code of 200 for all PSGI requests, even
though it should have only done it for PSGI requests from the ErrorDocument
middleware. This patch fixes that.
0) Do not apply patch
1) Open F12 dev tools and go to Network tab
2) Go to http://localhost:8081/files/blah
3) Note that the webpage is a 404 error but HTTP status code is 200
4) Go to http://localhost:8081/cgi-bin/koha/circ/blah
5) Note that the webpage is a 404 error and HTTP status code is 404
6) Apply patch
7) Go to http://localhost:8081/files/blah
8) Note that the webpage is a 404 error and HTTP status code is 404
9) Go to http://localhost:8081/cgi-bin/koha/circ/blah
10) Note that the webpage is a 404 error and HTTP status code is 404
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Currently, on SIP checkout, Koha only returns "Patron Blocked" when there is
a problem with the patron.
This patch adds more specific informations, with the following messages:
- "Patron expired"
- "Patron debarred"
- "Patron has fines" (see system preference "noissuescharge")
- "Patron blocked" (see system preference "OverduesBlockCirc")
Test plan:
- Try to do a SIP checkout with a patron that is in one of the above situations.
- Check that the displayed message matches the patron's situation.
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a few tests to cover more cases, and to highlight current functionality.
The script only allows renewal if all outstanding holds can be filled by available items.
This means we can return as soon as we have determined that not all holds can be filled.
I add FIXME and some explanatory comments - I will file a follow-up bug for those, but
I feel we can accept these improvements to the performance and deal with the issues
of how it 'should' work versus how it does work on another report.
To test:
1 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
ItemsAnyAvailableAndNotRestricted can take a long time and create nested loops.
We can check it once per patron, however, this requires us to flip the loops.
Since an item can only be used once, we now add a check to see if this item has already
been assigned to a borrower.
To test:
1 - Find or create a biblio with 100 items
2 - Place ten 'Next available' holds on a biblio
3 - Set preference 'AllowRenewalIfOtherItemsAvailable' to 'Allow'
Set circ rules 'On shelf holds allowed' to 'If any unavailable'
4 - Checkout one of the items to a patron, backdated to be overdue
5 - Note a long loading time for the patron's checkouts
6 - Apply patch, restart_all
7 - Patron loads much faster
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Some discovery tools can't translate ISL-DI results, it would be useful
if we can get ISL-DI output already translate.
This patch add an optional parameter language to GetAvailability, and
make GetAvailability results translatable.
If no parameter is given the output language is the language of the
cookies is present or the first language in the opac language list.
Test plan:
1. Enable the ILS-DI system preference
2. Locate a record
3. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice.)
4. Apply the patch
5. Test these URLs:
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[BIBLIONUMBER]&id_type=biblio&language=[LANGUAGE]
and
[OPACBASEURL]/cgi-bin/koha/ilsdi.pl?service=GetAvailability&id=[ITEMNUMBER]&id_type=item&language=[LANGUAGE]
(Where the [OPACBASEURL] is the OPAC URL of your test instance,
[BIBLIONUMBER] and [ITEMNUMBER] are a record number and item number of
your choice, [LANGUAGE] is a language code ex: 'en' or 'fr-FR')
6. The results should now be in the requested langugage
Sponsored-by: University Lyon 3
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The cookie created on L1496 is useless, since it is not returned.
We could either remove the cookie creation (unchanged behavior).
But since check_api_auth is expected to return a cookie when it is ok,
I opt for returning the cookie here (corrected behavior).
Test plan:
Logout in staff.
Check on staff: /cgi-bin/koha/svc/localization?id=1
You should have a 400 response.
Login with staff credentials (incl. manage_itemtypes)
Revisit same URL.
You should see a JSON response.
Check if you can hit other staff pages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We can now use $cookie_mgr->replace_in_list instead. This
effectively removes duplicates and keeps the newest cookie.
Note: In the test plan below we are just verifying if
this patch did not change behavior. The replace_in_list
routine has been tested already in a unit test.
Test plan:
Run t/db_dependent/Auth.t
Login at OPAC.
Hit some opac and staff pages.
Perform an Advanced search on OPAC.
Check cookies in browser.
Logout.
Check cookies again. Verify with your do_not_remove_cookie lines
in koha-conf.xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Enable language selection and have two languages.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie has been cleared in browser.
Add do_not_remove_cookie line for KohaOpacLanguage in koha-conf.
Restart, flush.
Login again.
Change language.
Check cookie value in browser for KohaOpacLanguage.
Logout.
Verify that cookie still contains the language.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Reverted the change to $cookies to minimize changes.
Fixed Auth.t where checkauth is being mocked.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This subroutine was mostly the same as GetColumnDefs, we replace it
identically as in the previous patch.
Test plan:
Translate some strings in another language
% gulp po:update --lang es-ES
% cd misc/translate
# Translate the relevant strings in po/es-ES-messages.po
# For instance "Alternate contact: Surname"
% perl translate install es-ES
Select the language for the interface (enable it in the 'language' syspref
first)
Create a new guided report and confirm that the columns for the borrowers
table are translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Templates::GetColumnDefs can easily be replaced using the new
Koha::Database::Columns module.
Test plan:
Go to the import patron tool and confirm that you see the same list of
patron's attribute on the import patron form.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to do inventory by collection.
_TEST PLAN_
Before applying:
1) Go to "Tools > Inventory/stocktaking"
2) Note that there is no "Collection code:" option
Optionally:
2b) You can create a Barcode file with a single barcode
2c) Don't select anything from "Select items you want to check" (or filter if you know
how to filter to make it faster... doesn't matter)
2d) Click "Submit" at the bottom of the screen
2e) Note that there is no "Collection code" column in the screen output or CSV output
(ie with/without the "Export to CSV file" box ticked before submitting)
Apply the patch.
After applying:
3) Note that there is a "Collection code" filter on the main inventory screen
4) Create a Barcode file with a single barcode for an item with a collection
and upload it using the "Choose file" button.
5) Select that item's collection code from the "Collection code" filter
6) Click "Submit"
7) Note that the screen output and the CSV output contains a "Collection code" column
(ie with/without the "Export to CSV file" box ticked before submitting)
Signed-off-by: kelly mcelligott <kpmcelligott@gmail.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In koha interface, a warning is displayed when an item on hold is returned
only if the return is for this specific item.
This patch does the same in SIP: the return is blocked when holds_block_checkin
is enabled and there is a hold on a specific item and this is the very item
being returned.
Test plan:
The following behavior is expected in SIP:
- An item is returned, and there is a reservation on record-level: block
- An item is returned, and there is a reservation on this very item: block
- An item is returned, and there is a reservation on another item: allow
Signed-off-by: Sonia <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Authority heading use is based on authority MARC 008/14-16. This could
be useful to show on authority search results, if new system preference
ShowHeadingUse is enabled.
To test:
1. Apply patches, update database, restart services
2. Go to Koha Administration -> system preferences -> searching tab.
Notice new ShowHeadingUse system preference is disabled. Leave it
disabled for now.
3. Do an authority search. Confirm it works as expected and no new
information is shown since ShowHeadingUse is disabled.
4. Do a biblio search and edit a record. Go to one of the authority
fields (1xx, 6xx or 7xx) and launch the authority finder plugin. Do an
authority search and confirm it works as expected and no new information
is shown since ShowHeadingUse is disabled.
5. Go back to system preferences and enable ShowHeadingUse syspref.
6. Repeat steps 3 and 4 but confirm the 'Heading use' column now shows, and
correctly displays what the heading can be used for based on 008/14-16.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Jessica <jzairo@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I added explanatory text to staff interface on the preference to explain how it works
Removed a debug warn in the _get_sort_bin routine
changed comparitor => comparator
fixed a missing call in the tests
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds support for specifying the comparison operator used in
the sort bin method. It allows for more complex cases where one may wish
to sort on groups of callnumbers for example.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This bug adds the SIP2SortBinMapping to make it possible to tell
the Koha SIP2 server to include a sort_bin/CL field in the
Checkin Response, if appropriate.
To test:
- Check out an item and return it via SIP2:
$ telnet localhost 8023
9300CNterm1|COterm1|CPCPL|
09N20200422 12430020200422 124300APCPL|AOCPL|AB001|AC|
(Where 001 in |AB001| is the barcode of the item in question)
- Check there is no CL field in the last response
- Apply the patch, fill in SIP2SortBinMapping with e.g.:
CPL:itype:BK:3
- Repeat the first step
- Check the respons contains a CL field with a value of 3 (or what
you put in the config). The field should look like |CL3|
- Signe ye offe
2020-06-25: Pass an item to _get_sort_bin, not a checkout. Rebase.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A new agefield has been added to the 'Automatic item modifications by
age' tool. The options for the agefield are: replacementpricedate, datelastborrowed,
datelastseen, damaged_on, itemlost_on, withdrawn_on
If no option is selected then Koha will default to saving 'agefield' =
items.dateaccessioned
Similarly, if a Koha instance has an old item rule without 'agefield'
defined then Koha will default to using 'items.dateaccessioned'.
This is confirmed by the AutomaticItemModificationByAge.t unit test.
Test plan:
1. Go to: Tools > Catalog > Automatic item modifications by age
2. Observe there is a new 'Age field' dropdown in the rule form.
3. Create a rule, set the values:
- 'Age in days' = 20
- Leave 'Age field' = 'Choose an age field'
- 'Substitutions': 'items.barcode' = 'test'
- Save the rule
4. Confirm the 'List of rules' page displays 'items.dateaccessioned in the 'Age field' column
5. Add another rule:
- 'Age in days' = 2
- 'Age field' = 'items.datelastseen'
- 'Substitutions': 'items.barcode' = 'test2'
- Save the rule
6. Confirm the 'List of rules' page displays 'items.datelastseen' in
the 'Age field' column for that second rule
7. Add some more rules and confirm you can delete them
8. Edit a record:
- Make the items.dateaccessioned = 3 day ago (so rule 1 is false)
- Make the items.datelastseen = 3 days ago (so rule 2 is true)
9. Run the automatic_items_modification_by_age.pl:
- sudo koha-shell <instance>
- cd misc/cronjobs
- ./automatic_item_modification_by_age.pl -v -c
10. Confirm the item has it's barcode set to 'test2'
11. Run unit tests:
- sudo koha-shell <instance>
- prove t/db_dependent/Items/AutomaticItemModificationByAge.t -v
Sponsored-By: Catalyst IT
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There are 2 prefs that control the default view of biblio detail pages:
IntranetBiblioDefaultView for staff and BiblioDefaultView for OPAC.
There are as well viewISBD, viewLabeledMARC and viewMARC to allow/don't
allow access to those page for staff members.
This code need to be in a single place to avoid discrepancy.
Test plan:
Play with BiblioDefaultView and IntranetBiblioDefaultView and confirm
that the links of biblio point to the correct view.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The following authorities subroutines are used by the ImportBatch
script but are not accessible, because they aren't imported. This
caused MARC importing errors.
- GetAuthorityXML
- ModAuthority
- DelAuthority
These affected the BatchCommitRecords and BatchRevertRecords routines,
and it wasn't caught because there are no tests written for them.
To test:
1. Find an existing authority record, or import one to use.
2. Save this authority record (export/download).
3. Go to Admin -> Record matching rules. Create a new record matching
rule for authorities that matches on 001, Local-Number index.
4. Go to Tools -> Stage MARC for import. Upload the authority file you
just downloaded.
5. Change record type to authority.
6. Under 'Look for existing items in catalog?', set the record matching
rule to the rule you just made which matches on 001. If matching
record found, replace the existing one. If no match is found, ignore.
7. Stage the record. Once complete, a match should've been found.
8. Go to Staged MARC management.
9. Import the batch into the catalog. Notice it hangs and never
completes.
10. Apply the patch and restart services.
11. Repeat steps 4-9. This time importing should be successful.
Sponsored-by: Educational Services Australia SCIS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The last run of a report is updated only if method execute_query() is
called with report_id.
This whas missing for :
- when report is run publicly
- when report is sent by email
- when report is exported
Patch changes the method signature to use a hash of params, in order to
easily avoid some params.
Test plan :
1) Create a report.
2) Run report.
3) Check the report listing. Confirm that the last run info on the report is updated.
4) Make report public.
5) Run report via public url.
6) Check the report listing. Confirm that the last run info on the report IS NOT updated.
7) Schedule the report to run at a given time and e-mailed to an address.
8) After the report runs at the scheduled time, check the report listing. Confirm that the last run info on the report IS NOT updated.
9) Run report.
10) Export results.
11) Check the report listing. Confirm that the last run info on the report IS NOT updated AT THE TIME OF THE EXPORT.
Questionable (I don't know if this is addressed):
12) Run report on backend through a cron job and send results via e-mail.
13) Check the report listing. Confirm that the last run info on the report IS NOT updated.
14) Apply patch.
15) Rerun steps 2-13. Confirm that steps 3, 6, 8, 11, and 13 DO UPDATE the last run info.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In C4/Reports/Guided.pm update_sql() called by test suite return warn :
Use of uninitialized value $sql in substitution (s///)
Test plan :
Run prove t/db_dependent/Reports/Guided.t and see warning disapearing
(whouchhhh)
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also addresses QA test tools, perldoc in ImportExportFramework.pm
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the comments from Comment 29 and the import
functionality. You should now be able to import an exported file without
editing the file at all and the authority type code will be overwritten
in the file (same behaviour as biblio frameworks).
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch amends C4::ImportExportFramework to work for authority types as well as MARC frameworks.
New file: admin/import_export_authtype.pl
Update: Ensuring we are passing the right column to the right tables.
Update2: Making the error messages the same to be consistent with patch on Bug 15665
Update3: Fixing merge conflicts
Update4: Fixing merge conflicts and removing tabs
Update5: Getting rid of warns, making sure Import and Export of default
authority will work
Update6: Merge conflicts and making sure export of default auth type
works
Update7: Fixing merge conflicts and updating buttons to bootstrap3
To test:
1) Go to Admin -> Authority types
2) Confirm there are two new columns 'Export' and 'Import' in the table
3) Click 'Export' on an existing authority type and choose a file type, click 'Export'
4) Confirm that the authority type is exported as your chosen file type. Save the file
5) Create a new authority type
6) Import into your new authority type using the file you just exported
7) Confirm you are taken to auth_tag_structure.pl
8) Go back to Authority types
9) Export your new authority type. View the exported file and confirm
the authtypecode has been updated to match the code you set for the new
auth type
10) Click 'Import' next to any existing authority type and attempt to import a file that is not XML, CSV or ODS. Confirm that this fails and you are asked to import a file of the correct file type
11) Confirm Export and Import work for the Default authority type
12) Go to Admin -> MARC bibliographic framework
13) Confirm that the 'Export' and 'Import' functions still work here as well
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch simply adds a check of cached values to see if agerestriction enabled before
fetching the biblio object
To test:
1 - prove -v t/db_dependent/Holds.t
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a record has holds on it, and, using offline circulation, an item on
that is checked out to a patron that did not have a hold on the record,
the next hold that would have trapped that item will be canceled.
1) Place two bib level holds on an item for two patrons
2) Find a third patron, note his or her cardnumber
3) Create the file test.koc by copying and pasting the following into a
text editor
Version=1.0 Generator=kocTest GeneratorVersion=0.7
2008-06-11 12:24:11 547 issue PATRONCARDNUMBER ITEMBARCODE
note the fields are tab delemited, ensure the tabs do not get lost
when copying and pasting!
4) Upload the offline circ action, and commit the action
5) Note the item was checked out to the third patron
6) Note one of the other patron's holds were canceled
7) Reset your database
8) Apply this patch
9) Test again, no hold should be canceled!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
