Important note: This will modify the UI.
The patron list will now be displayed in a table (instead of a select).
Test plan:
1/ Place a hold on a record
2/ Search for a patron
3/ Select a patron and submit
4/ The hold workflow should continue as previously
No behavior changes should be observed.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If one chooses to edit an existing course reserve for an item, saving it
should go back to the course details, but instead displays the "add
items: scan barcode" form.
Test Plan:
1) Edit a course reserve
2) Save it
3) Note you get the "add items: scan barcode" form
4) Apply this patch
5) Repeat steps 1 and 2
6) Note you are now redirected back to the course details page
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
'Add selected patrons to:' at the top of the patron search result
table is hard to translate correctly, because the 'to:' appears
as a separate string from the rest of the sentence.
To test:
- Make sure patron lists are activated
- Do a patron search with more than 1 result
- Look for the text at the top of the search results table
- Verify it looks the same before and after the patch
Bonus:
- run perl translate update <langcode> and verify the
2 strings are now 1 string with the patch applied
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/admin/aqbudgets.tt:15' and check the typo "wan" or go to Administration > Acquisition parameters > Funds > Help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Typo is fixed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/admin/columns_settings.tt' line 9 and check the typo "columsn" and change for columns.
2) See also changes for Column settings to Columns settings at lines 3 and 15
3) Apply the patch
4) Repeat step 1 and chek if the typo is fixed or go to Administration > Additional parameters > Configure columns and go to Help page.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Typo is fixed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous patch removed the name column, it's a regression.
This patch reintroduces it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The guarantor_search.tt is now useless, no script uses it.
It can be removed safely.
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
The "common" template is improved to allow different type of picking:
"add" or "select".
The first one appends a patron to a list, the second one selects the
patron and close the result search window.
The members/guarantor_search.pl has completly changed but is quite the
same file as acqui/add_user_search.pl. Both should exist: they don't
belong to the same module (acqui vs members), the picking type is
different (add vs select) and the columns are not the same.
The changes in the common template are very powerful, it's now possible
to list the column we want! This will be very useful for further
reusability.
Before this patch, all patrons mathing the pattern were return. Now only
the first 20 are (depends on the DataTables selected value).
For QA: This patch introduces a new template plugin "To", for now it
permits to convert a perl structure to json. In the idea, it could
permit to convert foo to bar too.
Test plan:
1/ Verify there is no regression in the guarantor search. When the
selection has been done, all data from the guarantor should fill the
form in the "main address" section.
Note that the request is done when the search input in not empty and the
user stop to write for 1 sec.
2/ Verify there is no regression on the 2 other pages where this patron
search is used: link a patron to an order and to a basket (in the
acquisition module).
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The add_user_search tt file will be reuse in next commits, this commit
just moves it in a "common" directory.
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without the patch the translated pages for quotes.tt may have the problematic line broken.
So the js is broken too. The line with bad usage of double quotes escaped :
var sEmptyTable = _("No quotes available. Please use the \"Add quote\" button to add a quote.");
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
diff on staff PO file
-msgid ""
-"No quotes available. Please use the \\\"Add quote\\\" button to add a quote."
+#, fuzzy
+msgid "No quotes available. Please use the 'Add quote' button to add a quote."
No koha-qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
\n in strings doesn't translate well, so we move it outside
the translated string.
To test:
- create at least 2 budgets
- close one of the budgets (moving orders from one budget to the other)
- after selecting the budget to move your orders to, save
- the confirmation message shown should read:
You have chosen to move all unreceived orders from 'budget 1' to 'budget 2'.
This action cannot be reversed. Do you wish to continue?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes all instances of CGI::scrolling_list from
reports/acquisitions_stats.pl, which prevented proper translation
To test:
1) Install and enable a language (es-ES or de-DE are good choices)
2) On Acquisitons wizard, some pulldown labels are not translated
3) Apply the patch
4) Update and install again the language
5) Check labels are translated and all pulldown works
This does not solve the 'Collection code' problem,
is more strange
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, good improvement.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The paging is slightly broken in the datatables table on the
news page in the tools module.
To test:
- Access the tools > news page
- Make sure you have a few news entries
- Check that the paging is broken without the patch and
fixed once the patch is applied
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Go on admin/cities.pl and catalogue/search-history.pl and confirm the
pagination is not broken anymore.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This will remove the restriction that forces the due date for
an on-site checkout to the end of the current day.
It will still suggest the end of the day, but you will be able
to change the date to whatever you want using the datepicker
widget.
To test:
Before applying the patch:
- Turn on OnSiteCheckouts and OnSiteCheckoutsForce
system preferences
- Check the on-site use checkbox and try to set due date
manually, it should not be possible
- Check out the item and check the due date is set to the
end of today
- Put a restriction on your patron account and repeat steps,
the item checked out should again have a due date at the
end of the day
> There should be no way to be able to check out an item
with a 'custom' due date
Apply the patch:
- Repeat steps from above, check out
- on-site use without a restriction on your account
- without changing the due date
- with a due date picked with the datepicker
- on-site use with a restriction on your account
... see above
- no on-site use but with a specified due date
- no on-site use, not specifying a due date
- Turn off SpecifyDueDate
- on-site use with and without restriction should
set the due date automatically to the end of the date
now, altering the due date should not be possible.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The date filters on the parcel page would only work with
dates formatted YYYY-MM-DD.
To test:
- Select a vendor, that already has a few invoices
- "Receive shipment" - you are on the parcels page
- Use the From and To filters on the left, notice there
is now a date picker on those fields
- Verify the search works correctly for different date
formats
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since bug 7162, it's possible to give a cancellation reason on deleting
an order.
This would be better to fill an authorised values category with the
different possible values.
Like that we will avoid to have duplicate or similar reasons.
Also, it will be easier to filter or create reports.
Test plan:
0/ Don't apply the patch
1/ Cancel some orders and give a cancelletion reason
2/ Apply the patch and execute the updatedb entry
3/ Cancel an order and verify the you have a list with the reason you
previously filled + 3 new ones ('No reason', 'Sold out' and
'Restocking');
4/ Choose one and verify the value is correctly displayed on the basket
page
5/ You can also try to add other values from the admin module.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch suppresses the first name part (including comma) if first name is empty. This way, first name is still displays with natural persons, but not with organizations.
To test:
Apply this patch (without the first patch).
Have one patron with a natural person as guarantor and one patron with an organization as guarantor. Verify that both display properly on the patron details page.
Signed-off-by: Jesse Maseto <Jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
1) cd misc/translator
2) perl translate update xx-YY
3) check that there's no msgids that contain the layout types or
text justification types in po/xx-YY-i-staff-t-prog-v-3006000.po
4) apply patch
5) perl translate update xx-YY
6) check po/xx-YY-i-staff-t-prog-v-3006000.po that it contains the
msgid for the frequencies. (search for "BLOCK translate_label_types"
and "BLOCK translate_justification_types")
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1) Apply this patch
2) Return an item via the checkouts table
3) Note the left most column now reads "Checked in" rather than "Returned"
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Counter patch, same test plan as original
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The displayed patron's name should be surname + firstname
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When no search has been done yet, it's not necessary to display the
result list.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before this enh, the users to add to a basket should have the
acquisition.order_manage permission.
This patch reintroduces this behavior.
The code in acqui/add_user_search.pl was never used. The filter should
be done in the members/search service.
But it is not possible easily to filter using a sql query, so the filter
is done after. This means that we cannot use the DT pagination
(otherwise the results will become inconsistent).
Test plan:
1/ On adding patrons to a basket, verify that the search patron results contain
patron with the acquisition.order_manage permission.
2/ Verify that all patrons are return on the 'normal' patron search and
when adding patrons to an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A previous enhancement allows to link basket with patrons.
Next patches will use the same way to link order with patrons.
In order to avoir c/p of code, this patch refactores this part of code.
Test plan:
1/ Verify there is no regression on adding/modifying users to a basket.
(acqui/basket.pl?basketno=XXX, "Managed by", "Add user").
2/ Note that you get a friendly message if the user is already present in the
list and when the user has correctly been added to the list.
3/ Note that the list uses the member search service (ie. DataTable +
serverside processing).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch tries to get the Bug out of "In discussion" by changing the design a little bit.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11146 introduced a way to go back, and have a logout link for the
"Not enough permissions" message page. I belive the logout button is redundant. And
also "Log in as a different user" tells the user more about its options on the scenario.
Simple and disputable usability/string change.
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch streamlines the page title text for search results in Home > Patrons to make it translateable (and more readable).
To test:
- Apply patch
- Select Englsh language
- Apply filter wit several values or click on a letter for "Browse by last name"
- Verify that the title makes sense
- Translate to your language and select this language
- Verify that the text appears properly in your language
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
http://bugs.koha-community.org/show_bug.cgi?id=13352
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When the holds queue report is limited to one library, it shows
<cound> items found for <branchcode>
With the patch applied, the branch name is shown instead of the code.
To test:
- Go to circulation > Holds queue
- Limit to one branch with holds waiting to be processed
- Confirm the string has changed to show the branch name
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The paging of the datatables on the 'holds to pull' report
page is broken without this patch.
To test:
- Make sure that some holds are placed on available items
in your installation
- Go to the circulation start page
- Open the 'holds to pull' report
- Verify that the patch fixes the paging on the result table
Also: Fixes "None" in the filter pull downs to be translatable.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The paging in the datatable on the 'circulation history' page
is broken without this patch.
/cgi-bin/koha/catalogue/issuehistory.pl?biblionumber=...
To test:
- Search for a record with items that have been checked out
in the past
- From the detail page, open the 'checkout history' tab
- Check paging displays correctly with this patch and is
broken without
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The paging of the datatable on the 'order from subscription' page
is broken without this patch.
To test:
- Make sure you have a subscription, note the vendor
- Create a new basket for this vendor
- Add a new order line 'from a subscription'
- Check paging on the result table displays correctly
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This updates the manage staged marc files help.
To test:
* Visit Tools > Staged MARC record management
* Click help
* Confirm it's there and correct
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a help file for the staff item search.
To test:
* Click search
* click item search
* click help
* review the help file
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new help file for column settings and updates the
files for budgets, funds, libraries, patron categories, and circ rules.
To test:
* Visit the above listed admin pages
* Review help files
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This updates the main circulation help file with new features in 3.18.
To test:
* visit circulation page
* click help
* review text
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This updates the main page help file for 3.18.
To test:
* Log in to staff cleint
* Click help on the mian page
* Review help file
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch creates a helpf ile for the batch record delete tool
and updates the help files for notices and marc export.
To test:
* Visit tools > batch record deletion
* confirm help is right
* Visit tools > Notices & Slips
* confirm help is right
* Visit tools > export marc
* cofirm the help is right
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 13425 tried to fix XSS in OPAC, by using url filter in template toolkit
on whole generated url. This doesn't work and create double encoded strings
in facets because we are creating url variable by concatenating query_cgi
(which did pass through uri_escape_utf8 on perl side) and other
parameters which have to be escaped in template.
Also, code like
[% SET limit_cgi_f = limit_cgi | url %]
doesn't do anything (at least doesn't apply url filter) so it's not needed.
This patch also fixes encoding of hidden fields used in sort by form.
And lastly, it tries to make facet changes for opac and intranet as same as
possible to simplify future maintencence of this code.
Test scenario:
1. find results in your opac which contain accented characters
2. click on them and verify that results are missing
3. apply this patch
4. re-run search and click on facets link verifying that there are
now results
5. test sort by form and verify that results are ok
6. verify that facets are still safe from injection by constructing url like
/cgi-bin/koha/opac-search.pl?q=123&sort_by='"><script>prompt('Happy_Holidays')</script>&limit=123
and verifying that you DON'T see prompt window in your browser
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the existing test about control fields.
A control field is < 10, not <=10!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a control field is used with a copy or move action, the interface
should block the user in some cases:
- If a control field is used with a regular field
- The subfield should be empty
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no record is selected, the modification should not be launched.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
