Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
While moving the dropdown to a block, I noticed the page size was very large when there are many holds
This patch chomps a large amoutn of whitespace, from the block and elsewhere and drecreased the paeg from about 400k lines to 25k lines for a record with ~200 holds
To test:
1 - Apply previous patch
2 - Load holds tab for a biblio
3 - Save the page as html from your browser, note the size of the file
4 - Apply patch this
5 - Reload and repeat
6 - Note the size is much smaller
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes a few changes:
1 - If we are not splitting the queue ( HoldsSplitQueue == 'nothing' ) then
there are no changes for 'virtual' vs 'actual' numbering
2 - If we are splitting the queue you cannot use the dropdown, so we do not need to process the options
3 - If the hold is 'found' we do not need to process the options
4 - We can simply use the 'last priority' to build the options, we do not need to process in the script
5 - We can use a block to build the options
6 - Remove a stray holds.index
To test:
1 - Place 5 holds on a bib
2 - 'Find' two of the holds i.e. check them in to set status to 'transit' or 'waiting'
3 - View the holds page for the biblio
4 - Inspect the priorty dropdown for the found holds, note they have options for 1-5 but are disabled
5 - Note the dropdowns for other holds have options 1-5
6 - Note options 4&5 in the dropdowns have no effect
7 - Apply patch
8 - Inspect the priority dopdowns on the found holds
9 - Note they only show their found status
10 - Note the other dropdowns only show options 1-3
11 - Test with other HoldsSplitQueue options and HoldsSplitQueueNumbering
12 - When holds queue is split, no dropdowns should be active and should show only their current priority
13 - When HoldsSplitQueueNumbering is 'virtual' the dropdown should be disabled and correctly count the number of unfound holds in the list
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
JK: Fixed grammar in commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
JD: Remove trailing 'i'
Bug 29049: (QA follow-up) Remove excessive whitespace
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the text colour for the purchase
suggestion box on the OPAC search results page to
make the text easier to read and improve accessibility.
To test:
1. Log in to the OPAC and search for something
2. Use an accessibility tool (e.g. Chrome's
Lighthouse tool) to check the contrast ratio
3. Confirm that the Purchase suggestion text
fails to meet accessibility requirements
4. Apply the patch and rebuild CSS:
yarn build --view opac
5. Confirm the text contrast ratio now meets
minimum accessibility requirements
6. Check that the OPAC still looks ok after
the changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of the label text in
OPAC search results to increase the contrast ratio,
improve accessibility and make the text easier to read.
To test:
1. Search for something on the OPAC
2. Use an accessibility tool (e.g. Chrome's Lighthouse
tool) to check the contrast ratio
3. Confirm that the labels (Edition, Format etc.) in the
results summary have insufficient contrast
4. Apply the patch and rebuild CSS:
yarn build --view opac
5. Use the accessibility tool to confirm the contrast
ratio now meets minimum accessibility requirements
6. Check that the OPAC still looks ok after the changes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of the clear search history link
on the OPAC to increase the contrast ratio, improve accessibility
and makes the text easier to read.
To test:
1. Go to the OPAC homepage
2. Use an accessibility tool (e.g Chrome's
Lighthouse tool) to check the contrast ratio
3. Confirm that the clear search history link
has insufficient contrast
4. Apply the patch and rebuild css:
yarn build --view opac
5. Confirm that the contrast ratio now
meets minimum accessibility requirements
6. Check the OPAC still looks ok after the changes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of the OPAC User Summary heading text to
increase the contrast ratio, improving accessibility and making the
text easier to read.
To test:
1. Log in to the OPAC homepage as a user with items checked out
2. Use an accessibility tool (e.g. Chrome's Lighthouse tool) to test the
contrast ratio.
3. Confirm the UserSummary heading has insufficient contrast.
4. Apply the patch and rebuild css:
yarn build --view opac
5. Use the accessibility tool to confirm the contrast ratio now meets
accessibility requirements
6. Check that the OPAC still looks ok after the changes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of links on the OPAC
to improve the contrast ratio and make the link
text easier to read. This accessibility issue was
identified using the WebAIM WAVE accessibility
browser extension and Google Chrome's Lighthouse
tool.
To test:
1. Use an accessibility tool (e.g. Chrome's
Lighthouse tool) to test the contrast ratio.
2. Confirm that some links (e.g. breadcrumb links
and title links in search results) have
insufficient contrast.
3. Apply the patch and rebuild the OPAC CSS:
yarn build --view opac
4. Use the accessibility tool to confirm the
contrast ratio meets minimum requirements
5. Check that the OPAC still looks ok after the
changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of the masthead
search label to improve accessibility and make it
easier to read.
To test:
1. Use an accessibility tool (e.g. Chrome's
Lighthouse tool) to test the contrast ratio.
2. Confirm that the search label has insufficient
contrast.
3. Apply the patch and rebuild the OPAC CSS:
yarn build --view opac
4. Use the accessibility tool to confirm the
contrast ratio now meets accessibility
requirements.
5. Check that the OPAC still looks ok after
the changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the colour of the navigation
links on the OPAC (Cart, Lists etc.) to improve
the contrast ration and make them easier to read.
To test:
1. Use an accessibility tool (e.g. Chrome's
Lighthouse tool) to check the contrast
ratio on the OPAC
2. Confirm that the navigation links have
insufficient contrast
3. Apply the patch and rebuild the OPAC css:
yarn build --view opac
4. Use the accessibility tool to confirm
the contrast ratio meets the minimum
accessibility requirements
5. Check that the OPAC looks ok after the
changes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove forgotten code of the old legacy demo functionality that was
removed from elsewhere except systempreferences, this code not only
serves no purpose but also is causing some troubles for our customers.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Note that we treat the elements 18-34 as one block of elements,
since its subdivision may vary.
E.g. if you pass 24 characters to the form, it will use the first
18 chars (until the last complete element) and pad with default
elements from position 18-39.
Test plan:
[1] Go to addbiblio. Make sure that 008 is connected to the plugin.
[2] Backspace field 008 a bit, click on the plugin button.
[3] Verify that the last elements come from the default.
[4] Repeat for a few different lengths.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Run t/db_dependent/FrameworkPlugin.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When preference CircAutoPrintQuickSlip is 'clear the screen', when an empty barcode field is submitted in circulation :
Before Bug 17845, behavior was to display empty circulation page (no patron selected).
Now behavior is displaying the circulation page of current patron.
I think previous behavior was used when scanner is used to clear form and wait for another patron card to be scanned.
Test plan :
1) Set system preference CircAutoPrintQuickSlip to 'clear the screen'
2) Go to a patron circulation page
3) Post form without a barcode
=> Check you go to circulation page with no patron selected
4) Set system preference CircAutoPrintQuickSlip to 'open a print quick slip window'
5) Go to a patron circulation page
6) Post form without a barcode
=> Check you go to print quick slip window with correct datas
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Actually this rule does nothing, it defines same background color as "body" : #fcf9fc
Test plan :
1) Without patch look at OPAC header
2) With patch OPAC header should have same background color
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since preference OpacMainUserBlock is now an HTML customization,
there is actually an HTML tags with id="opacmainuserblock" and one with id="OpacMainUserBlock".
Same for OPACNavRight in opac-registration-confirmation.tt
This patch removed id from page to keep the one comming from HTML customization include.
Test plan :
1) Create an HTML customization for OpacMainUserBlock with some text
2) Go to OPAC main page
3) Check HTML code of the page
4) Check you see id="OpacMainUserBlock" once and not id="opacmainuserblock"
5) Same for id="opacnavright" in opac-registration-confirmation.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Recent Firefox versions try to prefill userid and password with
logged in user credentials.
To test
1 - Log in staff as user foo password bar
2 - Save user and password in Firefox
3 - Log out
4 - Log in again, log in pop-up must be pre-filled
5 - Open Create a new patron form
6 - At least password field is pre-filled with logged in user's credentials
7 - Apply patch
8 - Redo 4 and 5
9 - Userid and password fields aren't prefilled
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch remove a check for confirm when fetching the entries
for possible deletion from the zebraqueue
Without this we die when we try to access the entries for counting
To test:
1 - perl misc/cronjobs/cleanup_database.pl --sessions --zebraqueue 10 --list-invites --z3950 --logs 180 --mail 375 -v
2 - Dies
3 - Apply patch
4 - Repeat 1
5 - Success!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
DefaultHldexpirationDate is set in the pref screen to 'yes/no'
The code checks if the preference is 'true', 'no' is true
We should instead use 1/0
To test:
0 - Have a fresh devbox
1 - With syspref disabled, place a hold
2 - Note no expiration date set
3 - Enable the preference
4 - Place a hold and note the expiration date is set, good
5 - Disable the pref
6 - Place a hold and note the expiration date is set, bad
7 - Apply patch
8 - Update database
9 - Repeat 1-8, date not set when pref disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the /cities routes spec and related files into YAML so
devs can use it as a reference for future routes.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/api/v1/cities.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 22440 will rewrite the route and make it even more efficient by
prefetching the related data instead of performing several queries in
loops.
In the meantime, we can make this controller perform better with a
simple intervention: load backends once, and use the
$request->_backend() setter to pre-set it before using the objects.
To test:
1. Perform any usual ILL requests listing, try having several
=> FAIL: Notice it takes a weird amount of time to load
2. Apply this patch
3. Restart all
4. Repeat 1
=> SUCCESS: It feels fast enough!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On patrons check out or details page, after renewing
loans they don't sort correctly when clicking on "Date due"
tab. Page has to be reloaded so that sorting works.
This patch adds new method RefreshIssuesTable to
checkouts.js. When loans are renewed or checked in, issues
table is reloaded to and due dates are sorted correctly.
To test:
1. Add 3 loans for patron.
2. Change due dates so you they are e.g. 07/01, 07/02, 07/04
3. Make sure you have renewal period set e.g. 5 days and
check your RenewalPeriodBase syspref (I use current date there)
4. Renew loan with date due on 07/01, it should now be 07/07
5. Sort loans by date due
=> Note that order from top to bottom is 07/04->07/02->07/07
or 07/07->07/02->07/04, not 07/02->07/04->07/07 as one would
assume.
6. Apply patch and repeat.
=> Note that issues table is reloaded ("Loading..." pop-up is displayed)
and that due dates are in correct order.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: kelly <kelly@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Bug 28653: (QA follow-up) Remove debug message used during development
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch corrects the JavaScript functions for the "select all" and
"clear all" action when viewing patrons in a list. Before this
correction, checkboxes which were previously in hidden table rows would
not be checked.
To test, apply the patch and go to Patrons -> Patron Lists
- View a patron list
- If necessary, add multiple patrons to the list so that the number
exceeds 20.
- Change the number of entries shown by the DataTable: Show [ 50 ]
entries.
- Click "Select all." All visible checkboxes should be checked.
- Click "Clear all." All checkboxes should be unchecked.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Argument "" isn't numeric in numeric gt (>) at
/usr/share/koha/koha-tmpl/intranet-tmpl/prog/en/modules/cataloguing/
addbiblio.tt line 896.
Came across it when testing 28608. Could have been a QA follow-up.
Test plan:
If you run QA tools on this patch, you should see the warning only
when processing files before patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With all the work that's gone into improving the internal
_clean_search_term method I feel we should expose it publically as it's
going to be more widely helpful
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
if QueryAutoTruncate enabled we will have any special operators ruined
for example: "test [6 TO 7]" will be converted to "test* [6* TO* 7]"
so no reason to keep ranges when QueryAutoTruncate set to "enabled"
1) enable QueryAutoTruncate at your sysprefs.
2) perform a search using range, for example: "[1999 TO 2020]",
it shouldn't work the way it's supposed to.
3) apply the patch.
4) perform the same search with range, ensure that it works correctly.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch ensures that the behavior with
QueryRegexEscapeOptions set to values other than
"Escape" still will works as expected.
It does so by storing the contents of regexes
before escaping special characters and
then restores the contents of regexes back to how
it was before, ensuring that searching with regex is possible.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently having exclamation sign at the end of the query makes ES
search fail, and when you try to search for a book that has exclamation
sign in the tittle (something like "Words! words") won't show results
correctly as it tries to negate everything that is after exclamation
sign, making it impossible to search for books that have in in the title
This patch escapes exclamation signs if it's at the end of the query or
has a space after it, resolving both of the issues listed above.
To reproduce:
1) with ES enabled, search for the book with title that contains
exclamation sight at the end, like "book!", this search should result
in error.
2) do another search, but this time find/prepare beforehand book with a
title that has exclamation sign with a space after it,
e.g "exclamation! sign", it shouldn't find it as ES treats everything
after that exclamation sign as negation.
2) apply the patch.
3) perform searches from the steep one and two again.
Search from step one should no longer fail, while search from the step
two should find that book.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch screens square and curly brackets which have no special
language meaning.
To reproduce:
1) using ES, search for the book with title that contains
square and/or curly brackets, like "book [second edition]", which will
result in error.
2) apply the patch.
3) search for that book again, ensure that it works now.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently searches like: "book:", ":book" and "host-item:test:n"
cause internal server errors.
This patch adds additional regexes that remove the colons at the start
and end of the query, and another regex that screens all follow-up
colons that go after the first colon to avoid errors when searching for
"host-item:test:n".
To reproduce:
1) using ES, search for the book with title that contains
semicolon at the start or at the end of the line, separated with spaces,
this should cause internal server error.
2) try doing the same with something like "host-item:test:n", it should
result in error as well.
3) apply the patch.
4) repeat steps 1-2, ensure that it works now.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a min attribute to the fields on this page and adds
other cost related fields to validator
To test:
1 - Apply patch
2 - Browse to Administration->Item types
3 - Edit or create an item type
4 - Attempt to place a negative or non numeric value in:
Daily rental charge
Hourly rental charge
Default replacement cost
Processing fee
5 - You should not be able to
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
-1 Set the specify due date option to a date, don't check the checkbox
-2 Enter an unknown barcode
-3 Click on fast add
-4 Add a record
-5 Add an item (don't change the barcode!)
-6 The item is checked out to the patron
-7 Verify: The checkbox is "Remember for session" is checked now
-8 APPLY patch
-9 Do steps 1-6 again, this time "Remember for session" should be unchecked
-10 Do steps 1-6 again but this time do check the "Remember for session" checkbox.
-11 It should be properly checked
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28464: (QA follow-up) Correct test plan
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use of uninitialized value in subroutine entry at /usr/share/koha/lib/Koha/Plugins/Base.pm line 182.
Test Plan:
1) Install the Kitchen Sink plugin ( it does not have a max versio defined )
2) Note the warning in your logs
3) Apply this patch
4) Restart all the things
5) No warning!
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In most authentication forms we see :
Fields "Login:" and "Password:" with a submit button "Log in".
In some places submit button contains "Login", which is confusing for translation.
It is not correct according to terminology https://wiki.koha-community.org/wiki/Terminology#L
Also in opac-user.pl ":" is missing, it generates new translation entries.
Test plan:
1) Log out if you are logged in
2) Go to staff interface
3) Check you see button "Log in"
4) Go to OPAC page /cgi-bin/koha/opac-user.pl
5) Check you see fields "Login:" and "Password:"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since Bug 23777 added To.json, single quote escaping in value_builder/unimarc_field_4XX.pl is useless.
Test plan:
1) Use UNIMARC database
2) Define value builder unimarc_field_4XX on 463$t
3) Create a record B1 with 200$a : L'avion
4) Create a record B2
5) Click on value builder in 463$t
6) Search for record B1
7) Click on "Choose"
=> Without patch 463$t contains : L\'avion
=> With patch 463$t contains : L'avion
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds an extra unit test, to cover the case where the
UpdateItemLocationOnCheckin System Preference is set to "_ALL_: CART"
and the item being returned has no shelving location set.
Test plan:
1) Apply the patch provided earlier
2) prove -v t/db_dependent/Circulation/issue.t
...and sign off if all tests pass.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
JD amended patch: use 'is' instead of 'ok'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The UpdateItemLocationOnCheckin System Preference can be set to update the
location of ALL items during check in, regardless of their shelving location.
However, this does not currently work 100% as it is excluding items with no
shelving location (i.e. value of NULL in the corresponding database field).
This patch, based on the comment made by Nick Clemens, fixes that.
Test plan (based on the original Bug Description by Andrew Fuerste-Henry):
1) Have a shelving location CART
2) In UpdateItemLocationOnCheckin, enter "_ALL_: CART" (without the quotes)
3) Check in an item that has a shelving location, confirm it changes to CART
4) Check in an item with a NULL shelving location, confirm it doesn't go to CART
5) Apply this patch
6) Repeat step 4): this time the item should move to the CART shelving location
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the JS comparison code to remove the '(All)' hint before comparing
to the current value
To test:
1 - Go to Administration -> Item types
2 - Edit a type to have a parent of another type
3 - Go to Administration -> Circulation and fines rules
4 - Add a rule for all categories for the child itemtype
5 - Add a rule for all categories for the parent itemtype
6 - Click edit on child type, note itemtype dropdown in editor correctly selected
7 - Click edit on parent type - note itemtype dropdown menu refers to 'All' itemtypes
8 - Apply patch
9 - Reload page and edit parent type rule
10 - Itemtype dropdown is correctly populated
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Add to OPAC virtual host in apache conf:
SetEnv OPAC_SEARCH_LIMIT branch:multibranch-1
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT branch:multibranchlimit-1"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
2 - Enable system preference OpacAddMastheadLibraryPulldown
3 - Create a library group enabled as OPAC search group (or make sure existing group 1 is an OPAC search group)
4 - Load the opac - dropdown does not pree-select the search group
5 - Apply patch
6 - Relaod opac - group is pre-selected!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
