The vendor contract management page has a few sections of code that are
meant to display a minimal confirmation message ("Data recorded") after
saving a new or edited vendor contract.
However, aqcontract.pl redirects back to the vendor details page after
saving, so this code is never reached and should be removed.
Test plan:
1. Apply patch
2. Go to the Acquisitions module and find a vendor
3. Click + New > Contract
4. Fill in the information and click Save
5. Click the "Contracts" link in the navigation menu on the left
--> Confirm that the contract was saved correctly
6. Click the Edit button and make changes to all fields
7. Save the information and click "Contracts" again
--> Confirm that the new information saved correctly
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
We intend not to have forms with method="post" without an op variable (so we
can check that the op starts with "cud-" as part of the CSRF protection), but
because of bug 37728 some were missed.
The two in systempreferences are the button to cancel deleting a local
preference, which can be fixed with no visible change, and the button to
return to the preferences list after being told that your requested deletion
has been done, which makes a visible change because right now, the whole page
that tells you the preference was deleted doesn't show at all.
Test plan:
1. Without the patch, Administration - System preferences - Local use (in the
left sidebar)
2. New system preference - Explanation and Variable are required, so make
them both Trash and Save
3. In the row for your new preference, click the Delete button
4. In the confirmation page, click the No, do not delete button
5. You'll be taken back to the list of Local use preferences. That's the
behavior that you want to see unchanged after the patch
6. Click the Delete button for your preference again, but this time click
Yes, delete
7. You'll be taken to a blank page with no category of preferences selected
or listed. That's the behavior that you want to see change with the patch
8. Apply patch, restart_all
9. Administration - System preferences - Local use - New system preference -
'Trash' for both Explanation and Variable - Save
10. In the row for the new preference, click the Delete button
11. In the confirmation page, click No, do not delete
12. Verify that it returns you to the list of Local use preferences just like
before
13. Click Delete again, but this time click Yes, delete
14. Now you should get a page saying "Data deleted" with a Back to system
preferences button. Click that button, you should return to the list
of Local use preferences, with your Trash preference gone
Sponsored-by: Chetco Community Public Library
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adds a status column to the table configuration that displays whether a
booking is active or expired (at the moment).
This column is conditionally shown in the 'Show Expired' state, meaning
after expired bookings are loaded into the table.
To test:
1) Create a couple booking for any item for a single patron.
2) Open a db shell with `koha-mysql <INSTANCE>`
3) Update one or two of the created bookings with:
update bookings set start_date = '<date in the past>', end_date = '<date also in the past'> where booking_id = '<booking id of the booking you just created>'.
4) Go the the bookings tab of said item.
5) Click the 'Show Expired' option in the top left of the table.
6) Note that bookings are tagged with 'Expired' and 'Active'.
7) Repeat 5 and 6 for the bookings tab in the patron's details view.
8) Sign off.
Note: the bootstrap classes for v5 are already included so they become
colored once the patch is in.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch the staff interface's bibliographic detail page, adding a tab
that shows comments submitted by users from the OPAC.
To test, apply the patch and restart services.
- If necessary, enable the "OPACComments" system preference and submit
some comments in the OPAC.
- In the staff interface, locate the title you submitted comments on.
- The bibliographic detail page should show a "Comments" tab with a
count of the number of all comments (approved and unapproved).
Sponsored-By: Athens County Public Libraries
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
There is now a new 'repeatable' checkbox when configuring
(adding or editing) an additional field for a specific table.
It is also displayed in a column in the additional fields panel
for a given tablename.
MARC fields are not allowed to be repeatable.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch updates the OPAC and staff interface to use Bootstrap 5.
Bootstrap CSS assets are now pulled from node_modules and compiled into
staff-global.css and opac.css at build time. This update lays the
foundations of some other chnages, especially the addition of a dark
mode in the future.
Hundreds of templates have been updated, mostly with updates to the grid
markup. Most of the responsive behavior is still the same with the
exception of improved flexibility of headers and footers in both the
OPAC and staff interface.
The other most common change is to add a new "namespace" to data
attributes used by Bootstrap, e.g. "data-bs-target" or "data-bs-toggle".
Modal markup has also been updated everywhere. Other common changes:
dropdown button markup, alert markup (we now use Bootstrap's "alert
alert-warning" and "alert alert-info" instead of our old "dialog alert"
and "dialog info").
Bootstrap 5 now uses CSS variables which we can override in our own
'_variables.scss' (in both the OPAC and staff) to accomplish a lot of
the style overrides which we previously put in staff-global.scss.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes table configuration to the tables shown on the
patron's print summary page, adding default display length and default
sort as well.
I removed the JS for moving around the DataTable controls to make them
display better and instead swapped the <caption>s for <h2>. It's not
perfect but it's better than it was.
Previously table configuration wasn't working because the window.print()
function was firing before the DataTables code had time to run. I've
added a use of onbeforeprint event to make sure we run the DataTables
initiation before automatic printing.
To test, apply the patch and restart services.
- In the staff client, go to Administration -> Table settings ->
Circulation -> print_summary.
- Configure the print-summary-checkouts, print-summary-fines, and
print-summary-holds tables with some custom options (e.g. hide
columns, change default sort).
- In the staff client, find a patron with checkouts, holds, and fines.
- In the toolbar, click Print -> Print summary. A new tab should appear
with the print summary view. A print dialog should appear immediately.
- In the print preview you should see that the tables you configured are
displayed correctly (sort is correct, columns correctly hidden, etc).
- If you print the page or cancel the tab should close.
- If you want to test the table configurations without having the tab
automatically close you can go to Administration -> System preferences
-> IntranetSlipPrinterJS and enter any dummy code, e.g.
"console.log('Testing');" With that preference populated, the
automatic closing isn't included.
- Test other pages which use the slip-print include, e.g. other patron
print options and quick spine labels in Cataloging.
Sponsored-By: Athens County Public Libraries
Signed-off-by: Thibaud Guillot <thibaud.guillot@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Apply patch and restart_all
2. Cataloging -> Inventory -> Submit
3. In the inventory report notice options to export at the top of the table
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Laura_Escamilla <laura.escamilla@bywatersolutions.com>
Updated column name from collection_code to collection in table settings.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This change shows a user-friendly error message instead of a 500 error
if adding a duplicate MARC tag to a MARC bibliographic framework.
Test plan:
0. Add patch and koha-plack --reload kohadev
1. Go to
http://localhost:8081/cgi-bin/koha/admin/marctagstructure.pl?searchfield=264&frameworkcode=
2. Click "New tag"
3. Enter "264" in "Tag:" field
4. Click "Save changes"
5. See error message on screen (instead of 500 error)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 34346: Tidy
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly adjusted error message and added punctuation.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This was introduced by bug 34478.
To test:
Follow the test plan as before, but test for several different patron categories
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Acquistions -> Budgets -> Funds -> Planning, select any option
2. In the toolbar see Export, and click Submit and see a 500 error
3. Apply patch, restart_all
4. Repeat steps 1-2
5. Notice the 500 error is gone and the CSV is exported properly
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Acquistions -> Budgets -> Funds -> Planning, select any option
2. In the toolbar see Export, and click Submit and see a 500 error
3. Apply patch, restart_all
4. Repeat steps 1-2
5. Notice the 500 error is gone and the CSV is exported properly
Notes:
Is there a reason we call exit(1) after exporting the csv?
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
In Administration > Patron categories, when setting the Password change in OPAC field, Koha will not save "Allowed" or "Not allowed" options, and will only keep "Follow the system preference OPACPasswordChange..." value.
Test Plan:
1) Change the Password change in OPAC field
2) Note the change doesn't take affect
3) Apply this patch
4) Change the field again
5) This time is stays!
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1. Make sure you have some overdue checkouts in your installation.
2. Go to Circulation > Overdues
3. Verify the ‘Checked out on’ column is visible by default, but can be hidden using the column settings
4. Verify that the export to CSV via the link on top of the table and includes the ‘Checked out on’ field.
5. Sign off and have an incredible day :D
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the columns in the table and also updates the controller to allow these fields to be updated in the database from the UI form
Sponsored-by: Cuyahoga County Public Library <https://cuyahogalibrary.org/>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
In Bug 36578, some fields were added to the pl index, but somehow it
ended up in the other-control-number index. This aims to put fields
752ad (MARC21) and 210a/214a (UNIMARC) in the pl index.
Test plan:
----------
0. Have an installation with Elasticsearch and MARC 21 configuration.
1. Under Administration > Search engine configuration (Elasticsearch)
under the tab Bibliographic records check that you have 752ad in
other-control-number search field.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -b kohadev
3. Under Administration > Search engine configuration (Elasticsearch)
under the tab Bibliographic records check that you have 752ad in pl
search field now.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes identity_providers.pl to remove the "cud-" prefix for
two operations which are not POSTed: editing identity providers and
editing domains.
To test, apply the patch and restart services.
- Go to Administration -> Identity providers.
- If necessary, create an identity provider and then click "Manage
domains" -> New identity provider domain to create a new domain.
- From the list of domains, click "Edit"
- The edit form should appear with all the correct details prefilled.
- Check that the page title, breadcrumbs, and page header all show the
correct domain.
- Make a change to the domain and confirm that the changes are saved.
- From the list of identity providers, click "Edit"
- This form should also load correctly.
- Submitted changes should be saved correctly.
Sponsored-by: Athens County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch changes the structure of columns_settings.yml so that the
configuration of tables on opac-course-details.pl and
opac-course-reserves.pl are in separate sections. They should not be
grouped under "biblio-detail" (opac-detail.pl).
To test you should have at least one course defined and some items
attached to that course.
- Apply the patch and restart services.
- Go to Administration -> Table settings -> OPAC
- You should see "Jump to" links for biblio-detail, course_items, and
course_list.
- Make some changes to the course_items and course_list configurations.
- Go to the OPAC and confirm that your changes are reflected in the
visible columns of those tables.
Sponsored-by: Athens County Public Libraries
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Put some items on hold, make some bib level holds and some item
level holds. Make sure that some of the holds have different shelving
locations.
2. Build the holds queue. In KTD: perl
/kohadevbox/koha/misc/cronjobs/holds/build_holds_queue.pl
3. Notice that the shelving location is in the same column as
itemcallnumber
4. Apply patch and restart_all
5. Reload the holds queue and notice that shelving location now has it's
own column.
6. Make sure you can sort by shelving location correctly.
7. Re-run the holds queue and apply the filter for shelving location.
Make sure all your holds of that shelving location are shown.
8. While in the holds queue try usiong the 'Shelving location' filter on
the left side of the page, make sure it works right.
9. Go to Admin > Table settings. Try hiding the shelving location column
and reload the holds queue to make sure it is properly hidden.
10. Try hiding some other columns via Table settings to make sure all
columns are still properly being hid.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch sets a default value for the EDI account form for the upload and download ports
Test plan:
1) Try to create an EDI account without setting the upload or download ports
2) The form will crash
3) Apply patch and restart_all
4) Try again, the form should submit
5) In your new EDI account, you should see the value of 22 for both ports
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This enhancement adds field 370 to MARC21 default authority
index mappings.
To test:
1. Import the attached .mrc file
2. Go to Authorities
3. Search 'Main heading' for quebec
--> 1 result (normal)
4. Search 'Entire record' for quebec
--> 1 result
5. Go to the OPAC > Authority search
6. Redo steps 3 and 4
--> Same results
7. Apply patch
8. Reindex authorities (in KTD shell:
koha-elasticsearch --rebuild -a -v -r kohadev)
9. Redo step 3
--> Still 1 result (normal)
10. Redo step 4
--> 2 results
11. Redo step 5-6
--> Same results as steps 9-10
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This enhancement adds field 678 to the default MARC21 authority index mappings.
To test:
1. Import the attached .mrc file
2. Go to Authorities
3. Search "Entire record" for innu
--> No results
4. Go to the OPAC > Authority search
5. Search "in the complete record" for innu
--> No results
6. Apply patch
7. Reindex authorities (in KTD shell:
koha-elasticsearch --rebuild -a -v -r kohadev)
8. Redo step 3
--> 1 result
9. Redo steps 4-5
--> 1 result
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch fixes validation of rules, confirmation on deletion of rules and removes some unused source code.
1) Validation of record overlay rules on edit and add action
2) Validation when editing an existing rule
3) Adds confirm when deleting multiple rules
Test plan:
1)
a) open http://localhost:8081/cgi-bin/koha/admin/marc-overlay-rules.pl
b) just click + Add rule
c) a new rule with an empty tag is saved
2)
a) edit an existing rule
b) empty input value for tag
c) click Save and check that the rule has now an empty value for tag
3)
a) delete a rule by checking the checkbox and clicking Delete selected
b) delete a rule by clicking the Delete button under Actions
c) notice that b) asks for confirmation
apply patch
1) redo steps and check that form does not get submitted and the input is marked as required
2) redo steps and check that clicking on Save will not submit the form and mark input as required
3) redo steps and check that a standard confirm popup appears
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
When you delete a tag from an authority framework, we intend to redirect you
right back to where you were, on the same page of tags, but because we pick
the wrong variable to set searchfield in the URL, we send you to the first
page instead.
Test plan:
1. Without the patch, Administration - Authority types - in the row for
CHRON_TERM Actions menu, MARC Structure
2. In the Search for tag: input, type 092 and hit Enter
3. In the row for 092, Actions menu, Delete, in the page that loads click
Yes, delete
4. In the page you are redirected to, note that you are at Tag 000, and the
URL is ?searchfield=&authtypecode=CHRON_TERM
5. Apply patch, restart_all
6. Type 092 and hit Enter, Actions menu for the 093 row, Delete, Yes, delete
7. Note that now you have gone to the page where 093 used to be, because
the URL is ?searchfield=092&authtypecode=CHRON_TERM and you can just
keep deleting 09x tags one after another
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Currently after you delete a tag from a MARC framework, Koha intends to show
you a page with the text "Tag deleted" and an OK button to click to go back to
where you were in the list of tags. But because that depends on the template
variable being set for the name of the op in the script, and the name of the
op is "cud-delete_confirmed" which isn't a legal TT variable name, nothing is
set to tell the template what to display, so it displays a mostly-blank page.
Far better to show, don't tell, and just redirect to the list of tags like
deleting a tag from an authority framework does.
Test plan:
1. Without the patch, Administration - MARC bibliographic frameworks -
Binders row - Actions menu - MARC structure
2. Type 092 and press Enter in the Search for tag: input
3. 092 row - Actions menu - Delete - Yes, delete this tag
4. Stare blankly at the blank page with only a header
5. Apply patch, restart_all
6. Administration - MARC bibliographic frameworks - Kits row - Actions menu -
MARC structure
7. Type 092 and press Enter in the Search for tag: input
8. 092 row - Actions menu - Delete - Yes, delete this tag
9. Enjoy the sight of the Kits framework showing a search for 092 that
doesn't show one, because you just deleted it, and now you can delete
the 096 tag next
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Eric Garcia <cubingguy714@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
You can't delete a patron category when it is in use, but because the
script which handles delete confirmation is expecting the wrong op,
cud-delete_confirm rather than delete_confirm, you don't get any warning,
just a failure to delete error message.
Test plan:
1. Without the patch, Administration - Patron categories
2. On the row for Staff, click Delete, Delete this category
3. Note an error message telling you to check the logs for details
4. Apply patch, restart_all
5. With the patch, repeat steps 1-2, note that instead of a button for
Delete this category you get a warning that it is in use
6. In the list of categories, row for Board, click Delete, Delete this category
7. Note that the (unused) Board category was deleted
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The scripts for managing biblio and authority framework tag editing are
expecting an op of cud-delete-confirm, but the op that is passed is the
correct thing, delete-confirm, because it's a GET of a page where the
confirmation will happen, not the later cud- operation. You can only see
that the expected op is wrong because the confirmation page doesn't get
the description of the tag.
Test plan:
1. Without the patch, Administration - MARC bibliographic framework
2. Default framework Actions menu, MARC structure
3. In the row for 025, Actions menu, Delete
4. Note that the page which loads shows "Tag: 025" and "Description:"
without actually having a description
5. Administration - Authority types
6. Default authority type Actions menu, MARC structure
7. In the row for 046, Actions menu, Delete
8. Note that the page that loads shows "Tag: 046" without the tag description
9. Apply patch, restart_all
10. With the patch, repeat steps 1-8, but this time note that you see the
description of the tag, not just the number. For both, click Yes, delete,
and verify that the tag is deleted.
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
admin/aqcontract.pl expects the op cud-delete-confirm, but what's sent is
the op delete-confirm because it's just a GET of the page that will actually
do a cud op once it is confirmed.
Test plan:
1. Without the patch, Acquisitions - Vendor search for My Vendor
2. Left Sidebar menu - Contracts - Add a contract
3. Fill in Name, Start date, End date, Save
4. On the line for the contract, click Delete
5. Note that the page that loads has no button for "Yes, delete contract"
(or for anything else)
6. Apply patch, restart_all
7. Acquisitions - Vendor search for My Vendor
8. Left Sidebar menu, Contracts, click Delete, then Yes, delete contract
9. Vendor search for My Vendor, Left Sidebar Contracts, verify the contract
is gone
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
- This index searches 022ayz, 023ayz (MARC21) and 011ayz (UNIMARC).
- 011y and 011z have been removed from issn search field for UNIMARC.
- 022yz and 023yz have also been added to the identifier-standard search field
Test plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Add a new biblio record putting the value '0046-2254' into the incorrect ISSN subfield (022y /023y for MARC21, or 011z for UNIMARC)
3. Do a biblio search for '0046-2254' and confirm no results are returned
4. Apply this patch and restart all services (restart_all)
5. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
6. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
7. Alternative to steps 5 and 6: reset_all
8. Repeat the biblio search for '0046-2254' and confirm you get a result
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Janusz Kaczmarek <januszop@gmail.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Go to Administration > System Preferences > Local Use
2. Attempt to delete a local system preference
--> The confirmation page displays a blank name and value
3. Click "Yes, delete"
--> The system preference is still there
4. Apply patch, restart_all, and reload page
5. Attempt to delete the system preference again
--> The confirmation page displays correct information
6. Click "Yes, delete"
--> The system preference is deleted successfully
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
APPLY PATCH and restart_all
1. Have a patron with and some holds and different priority.
2. Go to the patron account and click Print > Print summary
3. Notice the new holds priority column.
Note: Table settings don't work on these tables. See Bug 36475.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Adjust aqbudgets.pl and currency.pl to check for the correct op value
To test:
Part 1 - Delete a fund
1. Go to Acquisitions > Funds
2. Try to delete a fund
--> Confirmation page shows fund name as '' and fund amount as 0.00
3. Click "Yes, delete this fund"
--> The fund is still there
Part 2 - Delete a currency
3. Go to Acquisitions > Currencies
4. Try to delete a currency
--> Confirmation shows empty values for currency and rate
5. Click, "Yes, delete this currency"
--> An error message appears and the currency is not deleted
6. Apply patch and restart_all
7. Repeat steps 1-5
--> Confirmation pages display correct information, and deletions
occur successfully
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The scripts for managing both bib and authority frameworks are now expecting
an op 'cud-delete_confirm' but delete_confirm isn't cud, it's just a GET of a
page asking if you are sure. The scripts just need to expect the op they are
actually getting, delete_confirm.
Test plan:
1. Administration - MARC bibliographic framework - New framework
2. Give the framework any code and description and Submit
3. Actions menu for your new framework - Delete
4. Note the message says 'Confirm deletion of framework '' ()?" rather than
having the code and description included.
5. Click Yes, note that deleting failed
6. Administration - Authority types - New authority type
7. Give the authority type any type and description and Submit
8. Actions menu for your authority type - Delete
9. Note the message again says '' () rather than 'desc' (FOO)
10. Click yes, note that deleting failed
11. Finally! Apply patch, reset_all
12. Repeat steps 1-10, this time noting that you get 'desc' (FOO) rather than
'' (), and that deleting works.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Go to Acquisitions > EDI Accounts
2. Create an EDI account if one is not already there
3. Try to delete the EDI account
--> Page refreshes and nothing happens
4. Apply patch, restart_all, and refresh the page
5. Try to delete the EDI account again
--> A confirmation page displays with correct information
6. Click "Yes, delete"
--> The EDI account is deleted
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Account for multiple values param
Input is now multipleselect select
JavaScript
Staff CSS updates to account for multiselect dropdown in categories admin page
Signed-off-by: Arthur Suzuki <arthur.suzuki@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patches removes the "cud-" prefix from the "delete_confirm"
parameter check in Library EAN management. The confirm step is a GET
operation.
To test, apply the patch and restart services;
- Go to Administration -> Library EANs.
- Add an entry if necessary, then click "Delete."
- You should be taken to a confirmation page: "Confirm deletion of
EAN..."
- Confirm deletion and verify that the EAN was deleted.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is another instance of the deletion confirmation step getting
mistakenly auto-updated as if it were the deletion step. The
'delete_confirm' doesn't need the 'cud-' prefix, only the
'delete_confirmed' step.
To test, apply the patch and restart services.
- Test the process of deleting a budget.
- On the confirmation step you should see the name of the budget you're
about to delete.
- After confirming, the deletion should complete correctly.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. APPLY patch and restart services.
2. Have waiting holds, waiting holds past the expiration date, and
waiting holds with cancellation requests.
3. Go to Administration -> Table settings and find each of the tables. (
holdscr | holdso | holdst )
4. Each table should now include a 'Default display length:' and
'Default sort order:'
5. Play with those Table settings, ensuring they behave correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
Add category with/without integer restriction.
Test adding/editing values.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The main entry form of corporate names (110), uniform titles (130), topical
terms (150), geographical names (151), and genre/form (155) are not indexed
with 'Match' search field in Elasticsearch standard mapping. As a result,
the respective records are not present on the result list when performing
an 'All headings' search for the authority records with the main heading form
(MARC 21).
Test plan
=========
0. Have a test installation with Elasticsearch.
1. In Authorities, make an 'All headings' search for a main entry
form from the corporate names, uniform titles, topical terms,
geographical names, or genre/form
--> e.g., in ktd: UK Archiving. You will get no results.
2. Apply the patch, reindex with:
sudo koha-elasticsearch --rebuild -r -a kohadev
3. Repeat the test. You should see 'UK Archiving' on the result list.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Testing plan:
1. Start up KTD with Elasticsearch: ktd --es8 up
2. Apply the patch and restart everything (restart_all).
3. Reset the mappings: Administration > Catalog > Search engine configuration (Elasticsearch) > Reset mappings (at the bottom of the page)
4. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
5. Alternative to steps 3 and 4: reset_all
6. Update the visibility for 254$a in the default framework so that it is visible in the Editor (OPAC, Staff interface should already be selected).
7. Add a new record using the default framework and put a term in 254$a, such as 'Full score'.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
The values were correctly inserted but the display was not sorting
correctly
Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
With this patch the different info can be ordered when editing the
syspref
Sponsored-by: Orex Digital
Signed-off-by: Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Test plan:
1. Administration > search system preferences for the words database columns
2. Click the links to schema.koha-community.org, note that they 404 with
/master/ in the URL
3. Apply patch, reset_all
4. Search again, click the links, note that they load successfully with /main/
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch re-syncs the two catalog concerns display tables markup. We
add the 'Title' field into the catalog/detail version of the table and
split the columns settings so you can control the table distinctly from
the cataloguing module version so we can hide 'title' by default in the
details display tab.
This results in the table matching the display from the cataloguing
module page, i.e. the assignee and status detail displays.
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
See previous commit message, 'QA' part.
We do not support the "specials" categories.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Lukas Koszyk <lukasz.koszyk@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
