Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This adds a ; as separator between 440 and 490 fields used in the
same record. Currently we loop first 440 and then 490. 490 is displayed
depending on the indicator.
So after we finish the first loop, we check for existence of 490 on the
same record now to decide if a separator is needed.
To test:
- Look at various records using one or multiple 440 and 490 fields
- Verify the display is correct, especially when both appar on the
same record in both OPAC and staff
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: frederik <frederik@inlibro.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Currently Koha very inconsistently adds a . at the end when
outputting MARC fields on the detail views.
This patch removes the few cases where we add in .
Keeping the end user in mind, I believe it's not needed and
the added consistency will be nice. ISBD should be added on
cataloguing or by templates, but we should not mix when possible.
To test:
Catalog the following fields, if repeatable, add more than one:
- 020
- 022
- 111
- 242
- 245
- 246
- 250
- 300
- 440
- 490
- 700/710/711 with $i
- 700/710/711 ind.2 = 2
Verify both on staff and OPAC detail pages that there is no
additional . at the end of the line.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: frederik <frederik@inlibro.com>
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds the HTML class "rda264" to the span generated by the XSLT function
showRDAtag264.
To test, same as previous, using a notice with a 264 tag. Both patches
only apply to MARC21.
I was unsure how to name the class, so I've chose the simplest, most
explicit name.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This is a very small patch. I've simply added the following classes to
their respective spans in the detail XSLs for both interfaces.
- in_note (773$n)
- preceeding_entry_note (780$n)
- succeeding_entry_note (785$n)
To test:
1. Apply patch
2. Open details page of notice with a 773$n, 780$n or 785$n field
3. Inspect element. The class should be visible.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Set UseAuthoritiesForTracing to use
2 - Find some records with an 800 or 830 series entry
3 - View the record in staff and opac, note the series link does a search for title and author
4 - Apply patch
5 - restart all the things
6 - View the records, note the links now use the authority number
Signed-off-by: Ron Houk <RHouk@ottumwapubliclibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removes the br tags from the XSLT in favor of some more
spans and classes.
This will allow to add the line breaks with one line of CSS:
span.holdings_note_data { display:block; }
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Add line breaks in the 866 Holdings display in the OPAC details and Staff details page. Add 867 and 868 textual holdings with line breaks in the OPAC and Staff details display.
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch use GetCOinS sub to provide an OpenURL link in OPAC search
results. It uses 4 new system preferences:
- OpenURLinOPACResults: enable or disable this feature
- OpenURLResolverURL: url of the openURL resolver
- OpenURLText: text of the link
- OpenURLImageLocation: image of the link
Link is displayed as an image if OpenURLImageLocation is defined, and as
text otherwise.
It works both with and without XSLT enabled.
Changes made to GetCOinSBiblio:
For 'journal':
- Title should be in rft.jtitle instead of rft.title
- rft.date, rft.aulast, rft.aufirst, rft.au, rft.pub and rft.pages have
no meaning for a subscription, so they are simply removed from URL
This patch refactors GetCOinSBiblio, so the construction of URL is done
only at the end. This way we do not have ugly
$var .= "&$value"
in the function body.
Also use URI::Escape instead of custom regexps.
This development consider the value of syspref OPACURLOpenInNewWindow
when building the link.
Test plan:
1/ Enable syspref OPACShowOpenURL and put your OpenURL resolver URL in
OpenURLResolverURL syspref (if you don't have one, just fill it with
some fake URL, you'll have to check if OpenURL links are correct)
2/ If you want, set the other sysprefs OpenURLImageLocation and
OpenURLText
3/ Fill syspref OPACOpenURLItemTypes with some (not all) of your
item types.
4/ Empty sysprefs OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay
5/ Go to OPAC and launch a search.
6/ Check you have in the results (near the title) the OpenURL link (only
for itemtypes that are in OPACOpenURLItemTypes).
Toggle OPACURLOpenInNewWindow syspref and check that the behaviour of
the link is correct.
7/ Go to the detail page of one of those and check you have the OpenURL
link too. (Above tags)
Toggle OPACURLOpenInNewWindow syspref and check that the behaviour of
the link is correct.
8/ Set sysprefs OPACXSLTDetailsDisplay and OPACXSLTResultsDisplay to
"default" and repeat steps 5 to 7
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 13692 corrected the series link for records using a 490/800 combination
When a record has a 490/830 conbination for series, the link is malformed (title is used as author, title is blank)
Test Plan:
1) Catalog two or more records with 830 fields
2) Note the series links are broken
3) Apply this patch
4) Reload the record details page
5) The series link should now work
6) Repeat for the OPAC
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a 'pending hold' column to C4::Items:GetItemsInfo to
allow for displaying status of an item when it has been selected for a
hold by the holdsqueue and AllowItemsOnHoldCheckout is set to 'Don't
allow'
To test:
00 - Set AllowItemsOnHoldCheckout to 'Allow'
01 - Place a hold on an item
02 - Build the holdsqueue (kohadevbox example below)
sudo koha-shell kohadev
perl misc/cronjobs/holds/build_holds_queue.pl
03 - Search for the item on the OPAC
04 - Note item shows as 'Available' in results and details
05 - Toggle AllowItemsOnHOldCheckout to 'Don't allow'
06 - Repeat search, note there is no change
06 - Apply Patch
07 - Search for the item on the OPAC
08 - Note that item now shows as 'Pending hold'
09 - Toggle AllowItemsOnHoldCheckout to Allow
10 - Note item shows as available
11 - prove -v t/db_dependent/Items.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes the same issue where "title" is being translated (in fr-CA at least) and thus
break the javascript impacting the result display in the OPAC
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adds a xsl:value-of tag to prevent the value from being translated.
TEST PLAN
0) Apply patch
1) Translate
2) In the opac, div.record has not changed
NOTE:
I don't know if this bug affects all translations, I noticed it when translating to fr-CA.
The fix will work for all languages.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In UNIMARC, 604 contains subfield t, see http://multimedia.bnf.fr/unimarcb_trad/B604-6-2011.pdf.
Actual XSLT files use template tag_subject for 604, it does not use t subfield.
This patch adds subfield t to tag_subject and tag_onesubject templates in intranet and OPAC XSLT files.
Test plan :
1) In UNIMARC catalog edit a biblio record to add 604$t
2) Use default XSLT files in sysprefs
2) Go to catalogue details page of this record using default XSLT files
3) Check $t is displayed at OPAC and intranet
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The test should check $4 or $e for fields ne 111,711.
And should check $4 or $j for 111,711.
Test plan:
Edit a record, add a meeting in 711 without $4 but with $j.
Without this patch the term is not visible, with this patch it is.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch takes the suggestions in Bug 10562 and implements those
changes in MARC21slim2OPACResults.xsl. This patch also makes the
following changes:
- De-duplicate famfamfam icons: Remove the /silk subdirectory and move
non-duplicates to famfamfam/; Correct paths to these images in
templates and CSS
- Improve the granularity of some material type icon choices: Show
"Film," "Picture," or "Object" instead of "Visual material."
- Remove unnecessary title attributes from material type images
- Implement the kind of changes made in Bug 18235, "Add classes to
material type icons on result lists and detail pages"
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 14716 added a call to encode-uri() and namespace str. This
namespace declaration is sometimes missing in UNIMARC default XSLT
files.
This patch adds namespace declaration also where encode-uri is not used
because it may be used in the future. And those files are the base for
home made custom files.
Test plan :
1) Use a UNIMARC DB
2) Use default in all XSLT sysprefs
3) Apply patch
4) Perform a search on OPAC
5) Check display is OK
6) Click on a record for detail page
7) Check display is OK
8) Perform a search on staff interface
9) Check display is OK
10) Click on a record for detail page
11) Check display is OK
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It would be nice if the callnumber portion of the callnumber + label was in a span,
and it also makes sense to wrap the entire callnumber string in a span as well.
This was started on bug 21340 but I have found more callnumbers in the search results that need spans.
Test Plan:
1) Apply this patch
2) Search for something in the OAPC with multiple results
3) View the HTML source
4) Note the new spans around the callnumbers, like: <span class="CallNumber"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixes issues found during QA and unifies the SubfieldSelect function across the utils xsl's.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
4. Also try the attached test records and make sure their links work.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
4. Also try the attached test records and make sure their links work.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There's happiness too. You know.
Sponsored-by: Escuela de Orientacion Lacaniana
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the XSLT logic add the $g subfield in the 773 display
in both the OPAC and staff interface MARC21 record detail pages.
The XSLT chooses between different ways to create the link for the
related content, but then it only adds the $g in two of the cases.
There's no obvious reason for a different display.
To test:
- Have a record with:
=773 $tHost title $gp4.
=> SUCCESS: Notice the Detail view shows:
In: Host title p4.
- Have another record with:
=773 $tHost title $gp4. $w100
- Enable UseControlNumber (only to cover the case):
=> SUCCESS: Notice the detail view shows
In: Host title p4.
- Have another record with:
=773 $tHost title $gp4. $0456
=> FAIL: The Detail view doesn't show p4.
- Apply this patch
- Reload
=> SUCCESS: The Detail view displays p4.!
- Sign off :-D
Sponsored-by: Escuela de Orientacion Lacaniana
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It would be nice if the callnumber portion of the callnumber + label was in a span, and it also makes sense to wrap the entire callnumber string in a span as well.
Signed-off-by: Petter <petter@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the OPAC and staff client's XSL template for the
detail page so that series links based on a traced 490 tag use both
author and series title from the 800 tag.
To test you should have multiple titles in the same series with matching
490 and 800 tags in each record. Apply the patch and restart Plack if
necessary.
View the detail page for one of the series' titles. The "Series:" link
should link to a search which uses both series title and author.
Clicking the link should return the correct results.
Test both the OPAC and staff client.
Signed-off-by: John Sterbenz <jsterben@umich.edu>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adding Type of Unit (300$f) to the Opac details and staff side searches results and details display
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adding 245$f and 245$g to the Results and Detail pages on OPAC and staff side
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Zebra doesn't care about cases, but ES does and default mapping is
'control-number'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See MARC specification.
Note that we have a preceding text before all 776s too.
Test plan:
[1] Set field 776 ind2 to 8. And add text in $i.
[2] Look for this text on OPAC detail and staff detail.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Felix Hemme <felix.hemme@thulb.uni-jena.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adds code to opac and staff detail XSLT in order to show 776$t (or $a) and
a link based on 776$w (record control number). $w should be in the form:
(MARCOrgCode)Record-number
For instance: (NL-AmRIJ)12345
Note: You should have enabled default opac/intranet XSLT view.
Test plan:
[1] Add two 776s (one with $t and $w and one with $t only)
[2] Verify that you see "Additional physical formats" on opac-detail. Does
the link for $w work?
[3] Check intranet detail too.
[4] Empty 776$t and put text in $a. Check detail page again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Felix Hemme <felix.hemme@thulb.uni-jena.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan
1: Add something inside c and h of 245 on a Bibliographic Record. There won't be a space between
the c and h
2: This will occur on both the search results and the details pages of
the record in both the intranet and opac.
3: Apply the patch
4: Refresh and see that there is now a space between c and h.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
test plan
Edit a record
Edit field 583a to add an action note
Save the record and confirm that the note does not show up in staff
client or opac
Apply patch and refresh page
Action note should now show up in staff client and opac
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds some missing literary formats to the staff client and
OPAC's search results XSLT display.
To test you must have DisplayOPACiconsXSLT and DisplayIconsXSLT system
preferences enabled. XSLTResultsDisplay and OPACXSLTResultsDisplay
should be set to 'default.'
Perform searches in the staff client and the OPAC and confirm that the
following literary forms (defined in 008 position 33) display correctly:
Not fiction; Fiction; Dramas; Essays; Novels; Humor, satires, etc.;
Letters; Short stories; Mixed forms; Poetry; Speeches.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Playing with OPACResultsLibrary syspref, biblio with items having different
home/holding library are displayed properly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search in the OPAC it shows you the HOME branch on the location
in XSLT, but if you click through to the detail page it shows you the
CURRENT BRANCH in the holdings table which is very confusing to patrons.
I don't know what's the right solution - home or holding branch, but they
should be the same in both places for the patron's sake. If you do the same
search in the staff client you see the right branch info on the search results
and on the detail page.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Search the catalog, you search should include results with items
that have different home and holding libraries.
4) The results should look the same as before the patch
5) Change the system preference OPACResultsLibrary to "current location"
6) Refresh your page of search results
7) The results show now show the holding library instead of the home library
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch respect previous css classes
.authordates and .relatorcode but also include .titleportion
.authordates {display: none;}
.titleportion {display: none;}
.relatorcode {display: none;}
To test:
- Stage the two record attached with titles:
- Surface & coatings technology.
- Women crime writers.
- Reindex zebra (necessary to Opac and Itranet results)
- Leave empty the OPACUserCSS and IntranetUserCSS sysprefs
- Go to the new records in OPAC and Intranet detail page
- See the wrong display of dates
- Apply patch and refresh the page
- Test in OPACUserCSS and IntranetUserCSS the css stated before
- Play deleting or adding the classes
- Test with multiple records with 700 (with and without dates, etc;
710 and 711)
NOTE: dates in 710 and 711 can be hidden with .titleportion class;
dates in this kind of heading go with another data for example:
Catholic Church. Plenary Council of Baltimore (2nd : 1866)
Patch rebased some typos fixed in comments
Signed-off-by: Dani Elder <danielle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch add display link in XSLT for field 264/bug 14198 and reflect the
Zebra index 'Provider' in detail page for OPAC screen.
To test: follow previous test plan
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Same test plan as previous patch, but for opac defail and result using
the XSLT views.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I am amazed!
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Seperate -> separate test - check if spelling is changed
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Typo fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
With the changes for RDA now more subfields for the fields
100, 110, 111, and 700, 710, 711 are displayed.
One of them is $d - Dates associated with a name
This patch adds separate treatment of the $d subfield and
wraps it in a span with the class "authordates".
This makes it possible to hide the information with CSS.
To test:
- Make sure you have several records with $d catalogued
- Check the display in result list and detail page
with and without the page.
- Check, if there is a difference in display
- Check if the dates are correctly wrapped in a span
- Try to hide the information, using the following
entry in your *UserCSS preferences:
.authordates { display: none; }
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds a separator for multiple 508 fields to the XSLT display in the staff and OPAC detail view.
Separator is wrapped in span with class=‘separator’ for easy manipulation via css.
To test:
* Search the OPAC
* Click the title with multiple 508 fields
* Make sure the fields display properly
* Repeat for a few more titles
* Repeat in the Staff Client
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Find or create a record with MARC tags 655
4) Perform an opac search and select records with 655 field, select record and review details page.
5) Check that 655 field is clickable.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. 655 field clickable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
