Like everywhere else in Koha, offline circulation should be able to use userid as well as cardnumber to look up the patron for a transaction ( checkouts and fine payments ).
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Download the test.koc file attached to this bug
4) Verify you have an item with the barcode 39999000001396
create it if needed
5) Set a patron's username to "hacevedo"
6) Upload and import the test.koc file into offline circ
7) Verify the item was checked out and the payment was made
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create a Statistical Patron
2. Check out an item to the Stat Patron, that is checked out to another user
3. See that the local use is recorded, but the item does not get checked in
4. Check out an item that has a lost status and note that the local use is recorded, and the lost status is cleared.
5. Item is NOT checked in
6. Apply patch
7. Repeat steps 2 - 4. Item is checked in.
8. Set BlockReturnOfLostItems to Block.
9. Have a checkout to another patron then mark it as lost.
10. Check it out to the Statistical Patron. You should see the message "Item was lost, cannot be returned."
12. Conform the item remains on the patron's account.
13. Turn off BlockReturnOfLostItems, check out the same item to the Statistical Patron. You should see a message "Item was lost, now found."
14. Conform the item was actually checked in.
15. Set BlockReturnOfWithdrawnItems to Block.
16. Have a checkout to another patron then mark it as withdrawn.
17. Check it out to the Statistical Patron. You should see the message "Item was withdrawn, cannot be returned."
18. Conform the item remains on the patron's account.
19. Turn off BlockReturnOfWithdrawnItems, check out the same item to the Statistical Patron. You should see a message "Item was withdrawn."
20. Conform the item was actually checked in.
21. Have an item on a regular patron account that has a hold on it.
22. Check it out to the Statistical Patron
23. See the message "Item on hold, please checkin."
24. Have an item on a regular patron account that has a claim return on it.
25. Checkit it out to the Statistical Patron.
26. See the message "Item claimed returned, please checkin."
27. Have an item on a regular patron account that has been recalled.
28. Checkit it out to the Statistical Patron.
29. See the message "Item can fill a recall, please checkin."
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a few pieces of information to the print slip button
and makes the code confirm the hold
As we are printing before the confirm, we also add the ability to pass
in the itemnumber to 'ReserveSlip'
This is slightly hacky, however, I don't see another way to allow
printing without an additional page reload.
To test:
1 - Place a title level hold for patron A, for delivery to library B
2 - Attempt to checkout an item from the record above to Patron B from
library A
3 - You receive an alert about the hold
4 - Click "Don't check out, confirm hold, and print slip"
5 - Confirm the slip looks correct and has item info
6 - Confirm that item is in transit to fill hold
7 - Revert transit status
8 - Attempt to checkout the item to Patron B from Library B
9 - Click "Don't check out, confirm hold, and print slip"
10 - Confirm slip is correct
11 - Confirm item is marked waiting
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the uses of the static method with the new filter.
It also moves the tests to the relevant place and removes the (now)
unused method.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Without this patch:
Logout from OPAC. Crash.
Try to login. Crash.
With this patch:
Enable login in tracking triggers. Clear lastseen.
Flush memcache.
Login. Check lastseen.
Logout.
Login.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds handling for circulation of booked materials.
We prevent checkouts of booked items during the booking period where the
booking is for another user.
We update the due date to match the end of booking period when checking
out to the user who the booking is for.
If a checkout would overlap a booking to another user, we ask the user if
they will accept a reduced due date so the booked item is returned in
time to fulfill the booking.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This set of patches makes it possible to protect patrons from being accidetally
deleted or merged with other patrons, from the UI and from (well behaved) cron
jobs. The following subroutines are affected:
- Koha::Patron::delete
- Koha::Patron::merge_with
- Koha::Patron::safe_to_delete
- C4::Members::GetBorrowersToExpunge
Please note:
- This does not intend to protect patrons from being edited, only from being
deleted
To test:
* Tests
- Run the affected tests:
prove t/db_dependent/Members.t
prove t/db_dependent/Koha/Patrons.t
* Editing protected status and manual deletion
- Add a new user, note the presence of the "Protected" field under "Library
management", but leave it at the default "No", for now.
- Note that "Protected" is displayed in the "Library use" section of the patron
details.
- Note that More > Delete is avaiable as an action when the patron is saved
- Edit the user and set "Protected" to "Yes"
- Note that More > Delete is now disabled, with a note that the patron is protected
* Batch patron deletion
- Go to Tools > Batch patron deletion and anonymization
- Check the box for "Verify you want to delete patrons"
- Choose the category of your protected patron for "whose patron category is"
and click "Next" to run the actual deletion
- Check that your protected patron was not deleted
* Merging patrons
- Make sure you have two patrons with similar names or the same category, so
you can find them with one search. One should be protected, one not.
- Search for the patrons, tick their boxes and click on "Merge selected patrons"
- Select one of the patrons as the "patron to keep".
. Click on "Merge patrons"
- "No valid patrons to merge were found" should be shown
- Repeat this with the other patron as the "patron to keep"
(A future enhancement could be to not allow a protected patron to be selected for
merging in the first place.)
* misc/cronjobs/delete_patrons.pl
- Make sure you have a protected patron, in a category with at least one more
patron.
- Run something like this (at least in ktd):
$ perl misc/cronjobs/delete_patrons.pl --category_code <code> -v --confirm
(Replace <code> with the actual categorycode.)
- Make sure the borrowernumber of the protected patron is not mentioned in the
output of the script.
- Check the protected patron was not deleted
- Check the non-protected patrons were deleted
* REST API (with ktd)
- Make sure you still have a protected patron, and note their borrowernumber
- Enable RESTBasicAuth and restart all the things
- Run these two commands from the command line on the host:
$ curl -u koha:koha --request GET "http://localhost:8081/api/v1/patrons/54"
$ curl -u koha:koha --request DELETE "http://localhost:8081/api/v1/patrons/54"
(Replace 54 with the actual borrowernumber of your protected patron.)
- The first curl command should give you the patron details. The second should
give this output:
{"error":"Protected patrons cannot be deleted","error_code":"is_protected"}
There could be more functions/scripts where patrons are deleted that I have not
thought about. Please report them on the bug if you find any!
Update 2023-10-19: Fix "More > Delete" on patron, so link can not be clicked.
Update 2023-10-19: Rebase
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a desire for auto_renewals to treat the final renewal differently. We would like to notify the patron of the final renewal - but not again when the next renewal fails. This patch adds the new return value and tests.
To test:
prove -v t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I have some trouble to get the tidyness test on
AuthoritiesMarc.pm passing. There are several outstanding
patches touching this file, so I didn't dare to perltidy
the whole file just yet.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Instead of hardcoding the separator we take the value from systempreference.
Also adjust the unit test to expect the "equalterm" array.
Test plan same as before.
Signed-off-by: Christian Nelson <christian.nelson@uwasa.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently when a MARC21 authority has 7XX field they do not display on
authority search result page. 7XX is equal term of 1XX based on LC rules.
Applying this patch will enable that feature, which is important for non latin
catalogues.
Test plan:
1) Add a new authority with 1XX and 7XX fields.
2) Try to search that authority and check if 7XX values are displayed
3) Apply this patch
4) Try to search that authority and you will see that 7XX values are displayed
like "1XX = 7XX"
Sponsored-by: Keratsini-Drapetsona Municipal Library, Greece
Mentored-by: Andreas Roussos
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Works for me!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When using background jobs, there is a possibility of a race condition where two jobs will be updating the holds queue for the same biblio. We should try to minimize those cases (see bug 34596)
In the meantime though, we should prevent jobs possibly dying, and allow the most recent update to succeed.
There is a possibility two updates wil assign different items to the same reserve, and that a reserve could end up in the queue twice, however, whichever one is filled first will delete both entries. as filling the hold deletes by reserve id (see bug 24359)
This patch adds a transaction to delete and then inset the new row
To test:
1 - prove -v t/db_dependent/Reserves.t
2 - It fails
3 - Apply patch
4 - t/db_dependent/Reserves.t
5 - It succeeds!
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Might come back on the subject when resuming with bug 33636.
Test plan:
Run t/db_dependent/Koha/Statistics.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Tidy Koha/Item.pm bit further. Ordered hash keys too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moving code to Koha::Statistic->new and ->insert.
Polishing code a bit further in next patch.
Test plan:
Run t/db_dependent/Stats.t
Run t/db_dependent/Koha/Statistics.t
Run t/db_dependent/Koha/Pseudonymization.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
[EDIT] POD headers, use plural module and tidy Koha::Statistic
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These are: item_lost and item_found. Speak for themself.
Test plan:
Run t/db_dependent/Stats.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Enable the new digest option for "Hold filled" messages
5) Trap multiple holds for a patron
6) Note a single notices is generated for all the trapped holds!
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Laura ONeil <laura@bywatersolutions.com>
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I also change the default value for scale_height to '0.01'
Test plan:
1)Home > Cataloguing > Tools: Label creator > Manage Layout or New Layout
2)Make a new layout or edit an existing one
3)Notice the 2 new fields "Barcode width/Barcode height"
4)Save it like this
5)Create a batch of barcode and export if in PDF
6)Notice the size of barcode
7)Go back to your existing layout
8)Enter some values (Barcode width: 1.6 / Barcode height: 0.02), save
9)Take back your batch of barcode and export it in PDF
10)The barcode should be 2x bigger
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1)Home > Tools > Label creator > Manage Layout or New Layout
2)Make a new layout or edit an existing one
3)Notice the 2 new fields "Barcode width/Barcode height"
4)Save it like this
5)Create a batch of barcode and export if in PDF
6)Notice the size of barcode
7)Go back to your existing layout
8)Enter some values (Barcode width: 1.6 / Barcode height: 0.04), save
9)Take back your batch of barcode and export it in PDF
10)The barcode should be 2x bigger
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Johanna Miettunen <johanna.miettunen@haaga-helia.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Make sure SerialsSearchResultsLimit syspref is unset or set to 0.
2) Perform an advanced search on serials without any conditions
and confirm all serials are listed as expected.
3) Set SerialsSearchResultsLimit to a value less the the number
of total subscriptions, perform the search again, and confirm
that the number of serials has been limited to the set value.
4) Ensure all tests pass in t/db_dependent/Serials.t
Sponsored-by: Gothenburg University Library
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds 'hold' to the list of triggers available for tracking
patron activity.
Test plan
1) Select 'Placing a hold on an item' in the
TrackPatronLastActivityTriggers system preference
2) As a staff member, place a hold on any item for a test user
3) Confirm that the borrowers.lastseen field is updated for that test
borrower
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the older PatronLastActivity preference opting to
replace it by the new PatronLastActivityTriggers preference. The feature
can now be disabled by simply not selecting any triggers
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We were using a series of similarly named methods spread in distinct places
around the codebase. This combines the logic of C4::Auth::track_login_daily
and Koha::Patron->track_login into a new Koha::Patron->update_lastseen method.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes update_lastseen which has been replaced by a call to track_login_daily
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a trigger to every instance of track_login_daily
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds triggers to track_login_daily so that it only tracks activity when that trigger is active
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
adds the same feature to Authority Search as in the "normal" Z39.50 search, to display
arbitrary marc fields in the search results
1. apply patch
2. go to System preferences->Authorities preferences
3. the new option "AdditionalFieldsInZ3950ResultAuthSearch" shows up
4. enter the additional field numbers you want to see eg '001'
5. make an "Authority" search via Z39.50
6. the new new column "Additional fields" will display
7. sign off ;-)
Sponsored-by: Steiermärkische Landesbibliothek
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Clemens Tubach <clemens.tubach@kit.edu>
Bug 28166: Removed comments and _add_rowdata
Bug 28166: (follow-up) Restore custom fields for biblios
To test:
1 - Add "245$a" to AdditionalFieldsInZ3950ResultSearch preference
2 - Cataloging -> new from z3950
3 - Search and see results have 'additional fields' including the title
4 - Apply other patches
5 - Restart all
6 - Repeat Z39 Additional fields are now blank
7 - Apply thi patch, restart all
8 - Repeat Z39 search. Additional fields are restored
Bug 28166: (QA follow-up) Fix rebase issue
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
_CanBookBeAutoRenewed will only ever return 'auto_too_soon' not 'too_soon' so we can do a simple equality check
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Check if it's too soon for a manual renewal even if 'Automatic renewals' is enabled
Allow for a manual renewal even if it's too soon for an automatic renewal
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the system preference intranetreadinghistory determines visibility of both circulation history and holds history tabs in the patron record. It would be helpful to allow the option of setting each of those independently.
Specifically, libraries have requested the option of being able to view the holds history in a patron record without having to enable viewing of the circulation history.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Run updatadatabase.pl
4) Verify the new syspref intranetReadingHistoryHolds has the same value
as the existing syspref intranetreadinghistory
5) Disable intranetreadinghistory, enable intranetReadingHistoryHolds
6) Verify you can view a patron's holds history but not reading history
Signed-off-by: Sam Lau <samalau@gmail.com>
JD amended patch:
* renamed syspref intranetReadingHistoryHolds => IntranetReadingHistoryHolds
* tidy
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the design of additional contents the idea of a parent-child relation is implicitly present. You have a default page and translations.
But we do this in one table coming from the old news items.
Several reports show that we would be better off creating a parent table listing the main news items, CMS pages or HTML content. And a child table containing the title, content and lang.
Note that this first step is a prelimenary step to clean this area and make it more robust and extensible. More enhancements to come.
What is this patchset doing?
* DB changes
- Rename additional_contents.idnew with id
- Create a new table additional_contents_localizations(id, additional_content_id, title, content, lang) that will contain the translated contents
- Move the content to this new table
- Remove title, content and lang columns from additional_contents
- Replace the notice templates that are using ''<news>" (should only be ISSUESLIP) and remove support for this syntax. Also add a warning in case other occurrences of uses of the old syntax exist.
* CRUD
- We add a new Koha::AdditionalContentsLocalization[s] couple, and move some logic from Koha::AdditionalContent[s] to there. Note that, to prevent too much drastic changes in notice templates, and to make them easy to use, the different attributes of the content object is accessible from the translated content object (ie. Koha::AdditionalContentsLocatlization->library is available and return $self->additional_content->library). I think it's an elegant way to keep things simple.
- No changes expected for "NewsLog" logging
- Little behaviour changes for pages, see tools/page.pl changes. We are now passing the id of the content, and the desired language, instead of the mix of "page_id" or code and lang. Note that here we certainly need to rename "language" query param to not change the full interface language.
Test plan:
0. Preparation steps, use master
a. Create notice templates that are using "<< additional_contents.code >>". This won't be replaced, but we want the update process to alert us.
b. Create several news, additional contents, pages. Some with translated contents, some without.
c. Make sure ISSUESLIP has the "<news>" section. If you are using the sample data there is nothing to do here
d. Turn on NewsLogs
1. Apply the patches, restart_all, updatedatabase
=> Confirm that the new table is created and filled with the contents you had prior to the update
=> Confirm that additional_contents_localizations.updated_on has been kept to the previous values
=> Confirm that ISSUESLIP has been replaced properly
=> Confirm that you get a warning about the additional_contents
2. Create, update, delete news, html customs, pages
=> Confirm that the additional_contents_localizations.updated_on is only adjusted when required
=> Confirm that the logs are correctly created when NewsLogs is on
3. Check some items out, generate a slip
=> Confirm that the news are displayed at the bottom of the slip, and that the publication date is correctly formatted
4. Have several HTML customizations (like OpacNav, opacheader), in translated in different languages
=> Confirm that the default values is displayed when you are using the interface in a language without translation
=> Confirm that the translated version is picked when it exists
Notes for QA:
* I am not sure we really need the alert during the update DB process about the additional_contents leftover. We should not have them outside of ISSUESLIP.
Shouldn't it hurt?
* There is something ugly in sample_news.yml, the id is hardcoded. But how do we prevent that and keep translatability?
Sponsored-by: Rijksmuseum, Netherlands
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No more occurrences of GetAllIssues, remove it!
Test plan:
git grep is your friend
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
- Add one or more opac messages to a patron
(patron detail -> add message -> Add a message for: OPAC)
- Check that the messages will be displayed, with correctly formatted dates.
You can use src/C4/SIP/interactive_patron_dump.pl for easier testing.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an eval to the call for the record form metadata
If there is an error we catch it, display it, and attempt to strip bad characters from the record
To test:
1 - In koha testing docker attempt to view record 369 in the staff interface
2 - You see a warning about degraded view
3 - Attempt to edit the record
4 - Internal server error
5 - Apply patch, restart all
6 - Reload the editor
7 - Record successfully loads!
8 - You have a warning about encoding issues!
9 - Save the record
10 - No more warning!
11 - Edit again, no more warning!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Rename fields to opac*
This patch updates the field names to reflect that they're OPAC
related.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 32721: (QA follow-up) Fix rebase errors
We let some superflous template params creep back in during a rebase
somewhere.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patches addresses issues raised by the QA tests. It also adds a missed import of the Branches file in the document head
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: (QA follow-up) Add missing imports
Missing imports added in three template files
Exec flag added to atomic update file
Tinymce imports removed
A new bug will be created to move codemirror into an inc file at latest
version
Test plan as before
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 32721: Tidy up - duplicate fetching of userjs and css
Currently UserJS and UserCSS is injected into the template as a parameter through Auth.pm but is then fetched using Koha.Preference() in the template. This patch tidies this up by removing the parameters from Auth.pm
Test plan as per first commit
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Apply patches
2. sudo koha-upgrade-schema <instance>
3. Restart services
4. Set TaxRates syspref = 0.15
5. Create a new fund with amount = 1000
6. Add an order to a basket with the following values:
- Fund = Choose the fund from step #5
- Quantity = 1
- Vendor price = 10
- Tax rate = 15%
- Discount = 20%
- Retail price = 10.00
- Replacement cost = 10.00
- Actual cost = 10.00
- Ensure the basket belongs to a vendor with ("List prices" = "Don't include tax" and "Invoice prices" = "Don't include tax")
7. Go to the Acquisitions home page
8. Confirm the 'Ordered' column for the step #5 fund contains 9.20
9. Click on the 9.20 link and confirm the ordered.pl page that loads
also contains 9.20 as the 'Subtotal'
10. Change 'CalculateFundValuesIncludingTax' = 'Exclude'
11. On the Acquisitions home page confirm the 'Ordered' column now
contains 8.00
12. Click on the 8.00 link and confirm the ordered.pl page also contains
8.00 as the 'Subtotal'
13. Close your basket and receive your order - change the 'Actual costs'
= 8.00 (the $10 retail price less the 20% discount, tax exclusive)
14. Go to the Acquisitions home page and confirm the 'Spent' column now
contains 8.00
15. Click on the 8.00 link and confirm the spent.pl page also contains
8.00 as the 'Subtotal'
16. Change 'CalculateFundValuesIncludingTax' = 'Include'
17. Confirm the 'Spent' column on the Acquisitions home page now shows
9.20
18. Click on the 9.20 link and confirm the spent.pl page also contains
9.20 as the 'Subtotal'
Sponsored-by: Waikato Institute of Technology, New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
