Most part of the code here is unnecessary complex. We should selected
the currency if it is selected, that's all :)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 12803 [QA Followup] - Remove use of C4::Dates
C4::Dates was being included, but not used in the code!
Bug 12803 [QA Followup] - Fix koha-qa.pl errors
Bug 12803 [QA Followup] - Update unit tests due to changes in master
Bug 12803 [QA Followup] - Fix to stop failing unit tests
Bug 12803 [QA Followup] - Remove duplicate 'use' lines
Bug 12803 [QA Followup] - Remove NO_CACHE
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The holds queue is typically generated many times a day in order to
select items to fill holds. Often these items are to be sent to a
different library. However, if the library whose item is picked to fill
a hold is closed, that hold will remain unfilled even if there are other
open libraries who own that item. It would be helpful if we could skip
closed libraries for the purpose of selecting items to fill holds.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with two items on it, one at Branch A, and one at
Branch B
4) Place a hold for pickup at Branch C
5) Generate the holds queue
6) Note which branch's item is selected for the hold
7) Enable the new system preference HoldsQueueSkipClosed
8) Add today as a holiday for that branch noted in step 6
9) Regenerate the holds queue
10) View the holds queue, notice the item selected is not from
the closed branch!
11) prove t/db_dependent/HoldsQueue.t
Signed-off by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
When resending an email from the Notices tab in Patrons, we would like
to use the recent email address.
Test plan:
[1] Look up a patron with some notices sent.
[2] Adjust the patron email address (watch AutoEmailPrimaryAddress).
[3] Resend the notice. Verify if the new address was used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows to resend both sent and failed messages.
With messages in 'sent' status, we have to be careful not to accidentally send
sent messages again. With the previous patch using GET request, this was likely
to happen because of browser storing the GET parameters.
This patch changes request method from GET to POST. Instead of a simple link,
we now have a form element.
In notices.pl we redirect back to notices.pl, because with POST there is a risk
of resending the message accidentally by form resubmission at refresh.
To test, find/create a Patron that has sent or failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the sent or failed message
4. Observe that there is nothing for resending the sent or failed message
5. Apply the patches.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The C4::Letters module does not have a GetMessage subroutine, which
could be quite useful.
This patch adds it and simplifies the code added by the previous patch.
It also adds a few tests and fixes POD typos.
Note that ResendNotice only resends failed messages. This will avoid to
resend already sent messages (using an url from the browser history for
instance).
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds a link 'Resend' under a notice in 'failed' status
in the Patron's Notices tab.
By clicking the link, we will request notices.pl with parameter
"resendnotice=XXXXX" where XXXXX is message_id. In notices.pl,
we then check whether the given message is actually in 'failed'
status. If so, we use the C4::Letters::ResendMessage(123) to
change the status of the message into 'pending'. This way it
will be processed again by the cronjob process_message_queue.pl.
To test, find/create a Patron that has failed notices in message_queue:
1. Enable EnchancedMessagingPreferences system preference
2. Go to Patrons -> Notices
3. In the Notice column, click the title of the failed message
4. Observe that there is nothing for resending the failed message
5. Apply patch.
6. Reload Notices page and repeat step 3
7. Observe that there is now a link "Resend" in the Status-column
8. Click Resend
9. Observe that the message gets into 'pending' status
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch fixes the problem of missing WWW::YouTube::Download breaking
record detail views. Instead of a general 'use', the module is only
required if the related syspref is enabled.
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds:
- a new DB field items.new.
- a new page to configure this new status
(tools/toggle_new_status.pl).
- a new cronjob script (misc/cronjobs/automatic_item_modification_by_age.pl
was misc/cronjob/toggle_new_status.pl)
Why this status is useful for some libraries ?
The use cases are:
- to know easily what are the new items (with a simple sql query).
- to display an icon in the search results.
- issuing rules can be adapt for new items. Automatically (using the
cronjob script), the status change (depending the configuration) and
the item can be issued, for example.
- a RSS/Atom feeds can be created on these new items.
Test plan:
- log in with a librarian having the tools > items_batchmod permission.
- navigate to Home > Tools > Automatic item modifications by age (was: Toggle new status)
- click on the edit button
- there are 3 "blocks":
* duration: the duration during an item is considered as new.
* conditions: the status will change only if the conditions are meet.
* substitutions: if there is no substitution, no action will be done.
You can add some change to apply to the matching items.
E.g. ccode=3
new=''
If the value is an empty string (in other words, the input does not
contain anything), the field will be deleted.
You can create as many rules as you want.
- test the interface : add/remove rule, conditions, substitutions,
submit the form, edit, etc.
(There is a looot of JS everywhere, so certainly a looot of bugs...).
- when you have your rules defined, you can now launch the cronjob
script without any parameter.
A report will be displayed with the matching itemnumber and the
substitutions to apply. Verify results are consistent.
- launch the script with the -c argument and verify values have been
modified depending the substitution rules.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add the ability to specify fields from biblioitems table.
Test plan:
Same as before but try with fields from the biblioitems table.
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Add UT for C4::Items::ToggleNewStatus
Test plan:
prove t/db_dependent/Items/ToggleNewStatus.t
Signed-off-by: juliette et remy <juliette.levast@iepg.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: FIX - condition on biblioitems table does not work
If a rule contains a condition on the biblioitems table, the match won't
work. This patch fixes this issue.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Use DBIx-Class to retrieve column names
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Don't use the biblioitems fields for the subtitution
It's dangerous to allow a change on the biblioitems fields with this
feature.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Rename the duration parameter with 'age'
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: The age parameter should be a number
The template should check if the age parameter is correctly filled
(should be a number).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023: Change the name of the feature
Originaly this feature only permits to update the "new" field.
Now all item fields can be updated.
The name of the feature is now "Automatic item modifications by age".
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup]
* Update DB version
* Fix capitalization error
* Rename misc/cronjobs/toggle_new_status.pl to misc/cronjobs/automatic_item_modification_by_age.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11023 [QA Followup] - Complete the renaming of "toggle new status" to "automatic item modification by age"
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
1. Open OPAC self-registration page while logged out.
2. Note that cardnumber and categorycode are not shown.
3. Remove cardnumber and categorycode from
PatronSelfRegistrationBorrowerUnwantedField.
4. Enable autoMemberNum.
5. Reload self-registration page, note that categorycode now shows.
6. Disable autoMemberNum.
7. Reload self-registration page, note that cardnumber now shows.
8. Try saving a patron with an existing cardnumber; this should fail
and explain why.
9. Set CardnumberLength, and verify that those length restrictions are
enforced.
10. Verify that patron can be created with custom categorycode and
cardnumber.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Koha::Logger allows us to split up logging to separate files based on
the interface. However, right now the interface is limited to just
'opac' or 'intranet'.
We should extend this to allow the interface to also be set to 'sip'
for SIP server logging, and to 'commandline' for cronjobs and all other
command line scripts.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Does what it says on the tin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Koha::IsAuthorisedValueCategory contains only 2 useful calls, from
C4::Reports::Guided and reports/guided_reports.pl
It can be replaced with
Koha::AuthorisedValues->search({ category => $authorised_value})->count
Test plan:
1/ Create a sql report using an authorised value category, something
like:
SELECT COUNT(*) FROM items where itemlost=<<lost|LOST>>
2/ Execute the report and confirm that everything works fine.
3/ Create a sql report using a nonexistent authorised value categor,
something like:
SELECT COUNT(*) FROM items where itemlost=<<lost|NONEXIST>>
4/ When saving the report, you should get a warning message
"lost: The authorized value category (NONEXIST) you selected does not exist."
5/ Save anyway and execute the report, you should get the same warning
message.
QA:
git grep IsAuthorisedValueCategory
should not return any results
prove t/db_dependent/ReportsGuided.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When accessing the modification logs from a link that does not
explicitly set the to and from dates (e.g., from patron or bib details),
no results are displayed unless the object had an action occur during
the current day.
This is a side-effect of commit 5dceb851 for bug 13813.
Test plan:
- View the modification logs of a record which has already been modified
(/tools/viewlog.pl?do_it=1&modules=CATALOGUING&action=MODIFY&object=XXX)
=> Without this patch, you won't see any logs (unless you have modified
the record today)
=> With this patch, the behavior is the same as prior bug 13813 (you can
check in 3.20.x), you will see all logs
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When importing patrons with a csv file which does not contain the privacy_guarantor_checkouts column in the header, you will get
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'privacy_guarantor_checkouts' cannot be null at /home/koha/src/C4/Members.pm line 768
The same issue seems to occur for sms_provider_id.
Test Plan:
1) Attempt to import patron csv file with no privacy_guarantor_checkouts column
2) Note the error
3) Apply this patch
4) Repeat step 1
5) The error should no longer occur
NOTE: While this patch does work, should it be solved only
at this level? The issue that there is the lack of those two
fields on the tools screen still exists.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add optional embedding of YouTube videos via HTML5Media.
New syspref: HTML5MediaYouTube: Embed/Don't embed videos.
Format WEBM is hardcoded as it is the only format accepted by all
modern browsers.
Test plan:
- apply patch
- catalogue a YouTube link in 856$u
- turn on HTML5MediaEnabled and HTML5MediaYouTube
- open the record in OPAC and staff client, check that the
'Play media' tab is showing and playing the video works.
Possible enhancements for followups:
- check available formats, offer quality choice
- accept official YT URL shortener
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Works perfectly!
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It has been decided that Moose should not be a dependency for Koha, and
that this patch set should be reverted to avoid it's use.
This reverts commit 43bcc1c42c.
This reverts commit e5f4a0e3d5.
This reverts commit 6d44b0a91a.
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
The singleBranchMode system preference does not make sense.
Either the install has only 1 library defined or several. In both case,
we can easily guess the behavior to follow.
So the idea of this patch is to replace the fetch of this syspref with a
call to count the number of libraries defined in DB.
Test plan:
1/ From a fresh Koha install, execute the DB entry to remove the pref.
2/ Define only 1 library
3/ Confirm that Koha behaves the same as before (try to change your
library, look at the facets)
4/ Create another library (or more) and reinsert the pref and set it:
insert into systempreferences (variable, value)
values('singleBranchMode', 1);
5/ Execute the DB entry
You should get a warning message.
6/ Repeat 3.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Does what it says, but will change behaviour for any Koha install that
has 2 branches defined, One circulation, and this preference set.
If that is an acceptable change, we might need to make sure this is noted well in the
release notes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer is use and can be removed.
Test plan:
git grep displayServers
should not return any results.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Sponsored by : Do Space (www.dospace.org)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
* Use ->id instead of ->branchcode when possible to eliminate use of that nomenclature
* Fix bad use of ->branchcode to ->{branchcode} for unblessed hashref version of Koha::Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchInfo was only used once in opac/opac-suggestions.pl
The occurrence can easily be replaced by a call to Koha::Libraries->find
Test plan:
1/ Create a suggestion for library A
2/ Enable OPACViewOthersSuggestions
3/ Use a patron from library B to see the suggestions
4/ The "Suggested for" value should be correctly filled with the library
A name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory is not used anymore and can be
removed.
Test plan:
git grep GetBranchesInCategory
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getzipnamecity was not used and can be remove safely.
Test plan:
git grep getzipnamecity
should not return any result.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine has been added by
commit 42acfbf75b
Bug 7993: Save reports with Group/Subgroup hierarchy
But it has never been used (or git grep cheats me).
Test plan:
1/ git grep build_authorised_value_list
should not return any result
2/ Create a report, execute it
Everything should work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does not make sense anymore (Koha::DateUtils should be
used) and is no longer used.
It can be removed safely.
Test plan:
git grep slashifyDate
should not return any results
prove t/Koha.t
and
prove t/db_dependent/Koha.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
slashifyDate removed, all test pass successfully
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in use.
Test plan:
git grep get_itemtypeinfos_of
should not return any results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial and needed removal.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in used and can be remove.
Test plan:
git grep GetKohaImageurlFromAuthorisedValues
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
DESCRIPTION
-----------
Add unit tests to C4::UsageStats
Subroutine :
(V : tested, X : Not tested)
V NeedUpdate
V BuiltReport
X ReportToCommunity
V _count
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/UsageStats.t
-- All tests should run successfully
/!\ I have 1 warning but I don't know where it can come /!\
(in cleanup) DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308
TEST PLAN OPTIONAL
------------------
Go check bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 40,5%
Branch : 0,0%
Condition : 0,0%
Subroutine : 55,6%
Coverage AFTER this patch :
Statement : 81,0%
Branch : 100,0%
Condition : 100,0%
Subroutine : 88,8%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This problem was discovered the hard way:
- Drop DB
- Create DB
- Webinstaller run until the screen is:
We are ready to do some basic configuration.
Please install basic configuration settings to continue the installation.
-- The error log file will end with an error about splitting
an uninitialized value.
TEST PLAN
---------
0) First patch already applied
1) prove -v t/Languages.t
-- success, but warn prints
2) Apply this patch
3) prove -v t/Languages.t
-- success without warning messages
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. QA test tools run OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
Log you in!
Without this patch applied, you will get a warning
"Fetching the value or values of a single named parameter"
With this patch applied, the warning from C4::Auth line 401 should not
appear anymore in the log file.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note: no warnings for older CGI versions.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Some devices are using patron information responses to validate
patron passwords to govern access to facilities as we
were using C4::Auth::checkpw_hash this only worked in a db password
context not other authentication routines.
The C4::Auth routines are not very consistent and there isnt a dropin
replacement for checkpw_hash this calls checkpw instead.
In a password only environment this behaves as the old version did
returning field CQ as Y if a valid password or no password is passed in
the patron info request and N if an incorrect password is supplied
It should also test against the appropriate authentication sources if
othere autrhentication schemes are in use
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested this with a client who reports that this enables SIP authentication to work correctly with their LDAP server.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the Button area all tables which does not redefine the
dom/sDom DT parameter.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch specifically adds a test for the sub added to
resolve Bug 15479. As no test script existed to add this two
added one which also tests that ILS objects can be instantiated
correctly and offer the required interface
NOTE: This does not apply without the first patch.
Comment #3 suggested a unit test that would fail
before and pass after. So while this code is good,
it missed the before case. -- mtompset
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The borrowers table is defined COLLATE=utf8_unicode_ci which means
that cardnumbers may be saved in either lowercase or uppercase and
these are considered equivalent.
The server was performing a case sensitive comparison between
the incoming patron identifier and that retrieved from the db
As a result some renewals were rejected as being on loan to
another borrower if the stored cardnumber differed in case.
Make code comparison comply with db.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
