When placing a new order, the budget dropdown will display the budget hierarchy.
TEST PLAN :
1. Go to the Administration module
2. Add a new budget (ie : Budget 2016)
3. Add a fund to this budget (ie : Book)
4. Add a child fund (ie : Adult fiction)
You will have this hierarchy :
Budget 2016
|____ Book
|_____ Adult fiction
5. Go to the Acquisition module
6. Select a vendor and create a new basket
7. Place an order
8. Check the budget dropdown menu
BEFORE PATCH
Book
Adult fiction
AFTER PATCH
Book
Adult fiction
Dropbown menu is hierarchical as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This commit permits to update the tax rate on receiving.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a basketgroup is exported as a CSV file, both prices should be displayed to
avoid confusion.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Well, we have finally arrived here \o/
The method where the prices are calculated uses the equations listed on
the wiki page (http://wiki.koha-community.org/wiki/GST_Rewrite_RFC).
The ecost is calculated from the rrp (using the discount and the tax
rate). That's why we removed the ability to edit this value.
That's why we remove the ability to edit the ecost on ordering in a
previous commit (bug 12840).
The total is now calculated in the scripts. That's why this patch
removes lines in the test file.
In C4::Acquisition::populate_order_with_prices, the calculation on
receiving must depend on the 'invoiceincgst' supplier parameter, and not
listincgst (which is used on ordering).
It also removes the rounding errors, now we store "exact" values in DB
(10^-6).
The values will be displayed using the Price TT plugin it will round the
values for us.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch renames the variable according to the new DB column names
* gste => tax_excluded
* gsti => tax_included
* gstrate => tax_rate
* gstvalue => tax_value
This patch also modify the ModReceiveOrder subroutine:
* Edit vendor note on receiving is not possible, so the code should not
permit that.
* Update ModReceiveOrder to pass a hashref
And that's all!
git grep on gste, gsti, gstrate and gstvalue should not return any code
that can be executed.
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Francois Charbonnier <francois.charbonnier@inlibro.com>
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Fix a tab
- Fix a variable name in a template
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
With all patches applied no errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This was the "Get" subroutine for the framework, it can be easily
replaced with a call to the Koha::BiblioFrameworks->find method.
This patch also replaces some confusing wordings (framework vs frameworkcode).
Test plan:
On the circulation home page, you should see a "Fast cataloguing" link
if the FA framework exists.
Note that the admin/marctagstructure.pl has already been tested in the
previous patch.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link pops Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Koha::getframeworks returned a hashref of biblio frameworks.
It was mainly used to generate the dropdown list of frameworks.
The scripts modified in this patch did not necessary order the element
by description (frameworktext), the displays were not consistent from
one screen to another.
Using the same search method everywhere:
Koha::BiblioFrameworks->search({}, { order_by => ['frameworktext'] });
We will know always get the framework in the same order.
Test plan:
Following the different pages modified by this patch, and make sure the
frameworks are displayed correctly in the dropdown list:
1/ acqui/z3950_search.pl - Create an order from an external source.
2/ admin/fieldmapping.pl - Define some mappings keyword / MARC field
3/ admin/marctagstructure.pl - On the MARC frameworks admin page, select
another framework than the default one and click on the 'Search' button
4/ catalogue/MARCdetail.pl - On the MARC defail page, change the
framework you want to use to display the record
5/ cataloguing/addbiblio.pl - Add or edit a biblio record, change its
framework. When editing, the framework of the record should be selected
by default
6/ cataloguing/addbooks.pl - Go on the cataloguing home page and click
on the "New record" button. You should see all the frameworks
7/ cataloguing/merge.pl - Select 2 biblio records to merge. On the first
step (select the merge reference), you should be allowed to select the
framework to use.
8/ tools/inventory.pl - On the inventory page, the "Item statuses" part
should be populated as before this patch
9/ tools/manage-marc-import.pl - Stage records for import. Before
importing them into the catalog, you should see the framework dropdown
list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Koha::GetFrameworksLoop retrieves biblio frameworks and returns
them ordered by the description (frameworktext). If a parameter is
passed, a selected flag is set. The selection of the options should be
done on the template side.
These 2 calls can be replaced with
Koha::BiblioFrameworks->search({}, { order_by => ['frameworktext'] });
Test plan:
1/ Go on a Labeled MARC biblio view (catalogue/labeledMARCdetail.pl)
You should see a dropdown list with the biblio frameworks. The framework
of the record should be selected by default
2/ Create a sql report using the biblio_framework parameter, something
like:
SELECT COUNT(*) FROM biblio WHERE frameworkcode=<<framework|biblio_framework>>
Save and execute the report.
You should get a dropdown list with the framework list.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both dropdowns Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a syspref "AggressiveMatchOnISSN" allowing for a match
of ISSNs with or without hyphens. It uses Business::ISSN in order to
follow the use of Business::ISBN and allow for validation of ISSNs
To test:
1 - Find a record in your system with an ISSN (or add one)
2 - Stage a record containing the same ISSN but lacking a hyphen
3 - Matching on ISSN should find 0 matches
4 - Repeat with no hyphen ISSN in system and hyphen ISSN in import
5 - Matching should find 0
6 - Apply patch
7 - Update datbase and install Business::ISSN
8 - Leave AggressiveMatchOnISSN as don't and repeat original tests- no
change
9 - Set AggressiveMatchOnISSN as do and repeat original test
10 - You should find a match
11 - prove t/Koha.t - all tests pass
Sponsored by North Central Regional Library System (NCRL) www.ncrl.org
Signed-off-by: Chad Roseburg <croseburg@ncrl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch changes "Library" to "Issuing library" and
"Patron branch" to "Patron library".
It also changes the text of the filters to match
the terms and spelling on the form itself.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Display values in NULL columns/rows
- Display columns/rows that contain values only in NULL rows/columns
- "To" filter in period row should be inclusive (YYYY-MM-DD should be
YYYY-MM-DD 23:59:59)
- Make it possible to use only the "To" filter in period row (actually
it results in DBI error (2 bind variables instead of 1))
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Add patron branch to the list of possible rows, columns, and filters
- Add extended patron attributes to the list of possible rows, columns,
and filters
- Allow to group period by hour
- Allow to translate filter names
NOTE: Removed signed off, since I believe I have dealt with the conflicts.
Retesting required. Found some comments C4::Date that I missed.
line prepatch 194/ postpatch 233 seems to be where the major
conflict is.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to redirect, just sent the params to the template directly
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When no notice template ACQORDER was defined, you'r receive a false
positive "email sent" message. Now it will display a specific
error message instead.
Also includes 2 unit tests to test for the warn and new error code.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With this patch it will be possible to send order information
to the vendor by e-mail. For now this feature can be triggered
manually with a button before closing the basket.
The order e-mail is based on the acquisition claim feature, but
uses a new notice template.
Test plan:
1) Vendors
A new checkbox "Contact when ordering?" was added to the vendor
page.
- Add a vendor and/or edit an existing vendor
- Verify the new option is saved correctly
- Verify the new option displays on the vendor summary page
after saving
2) Notices
The feature works with a new notice template: ACQORDER
It works with the same formatting/fields etc. as the acq claim
notice.
- Add a new notice template ACQORDER in module
'Claim/order aquisition'
- Make sure to use fields from the various offered tables
in your notice
- Verify it is saved correctly
3) Basket
- Turn on LetterLog system preference
- Create multiple order lines
- Click the 'Send order' button in the toolbar
- Verify error or success message
- Verify you received the e-mail
- Verify there is a new entry with about the sent
notice in your action_logs table
4) Regression testing...
- Verify order claims still work
- Verify serial claims still work
- Verify new serial issue notices still work
...
(I can provide additional test plans if needed)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
rename Patron carnumber on Patron card number
fix src databales.js
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Also fix forbidden patterns in koha-tmpl/intranet-tmpl/prog/en/modules/reports/reports-home.tt
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fix the new path for 'datatables.css'
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Tried to address every single thing that QA mentioned :
1)Removed isNull function
2)Changed datepicker properly
3)We have to fill in two dates not to be flooded with old entries if we don't want to.
4)The first two fieldsets are now in one bigger field set
5)Removed the use of $fullreportname variable
6)Removed the use of dt_from_string when it already recieved a DT.
7)Removed comments starting with "###" in cash_register_stats.pl
8)Used Text::CSV::Encoded to generate the CSV file (used guided_reports.pl as an example)
9)I am not sure if using C4::Reports::Guided is the right choice here. I instead used the same column names as the one recieved by the query in cash_register_stats because this report uses columns from 5 different tables in addition of using both firstname and surname twice.
For the ninth point, I would like to know more about C4::Reports::Guided if you still think using it would be a better solution. Thank you!
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To be more specific, the column note from accountlines is now displayed in the table of the transactions.
The grand total is now calculated for neagtive types like Credit or Payment and isn't counted for Write off types.
Credit (return item) 'CR' has been added to drop down of transaction type
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
I cleaned up the code according to comment #23. I got rid of DHTMLcalendar_dateformat,
beacause it wasn't use in cash_register_stats.tt. C4::Dates is deprecated,
Koha::DateUtils is now used.
Some column names are changed and the pagination for the dataTables is fixed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch creates a new report that outputs cash register stats for a specific period.
Changes:
koha-tmpl/intranet-tmpl/prog/en/includes/reports-menu.inc - Added cash register report link
koha-tmpl/intranet-tmpl/prog/en/modules/reports/cash-register_stats.tt - new file
koha-tmpl/intranet-tmpl/prog/en/modules/reports/reports-home.tt - Added cash register report link
reports/cash-register_stats.pl - new file
Testing:
I Apply the patch
0) Go to reports home page (Home › Reports);
1) Validate link << Cash Register >> under Statistics wizards;
2) Click link;
3) Validate page with three fieldsets;
4) Chose a date interval, a transaction type, a library and an output;
5) Validade the result.
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Create patron category with category code "P" and create a patron
with this category
2) Fill in either the primary or other phone number
3) Go to patron details page (moremember.pl)
=> without patch you see primary/other phone duplicated
=> with patch you should see the number only once as expected
Signed-off-by: Lucio Moraes <lmoraes@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes two minor errors in the markup around displaying news
on the staff client home page: Adding a missing "class" attribute, and
changing the container around news items from <p> to <div> (because news
items might contain <p> and nesting them is incorrect).
To test, apply the patch and view the staff client home page with news
items showing. Validate the page and confirm that there are no errors.
Signed-off-by: Marc <veron@veron.ch>
Revision for QA removes an extra </div> from elsewhere in the template
to make the validator return no errors.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you access reports/issues_stats.pl, you will get
Template process failed: undef error - The method selected is not
covered by tests! at /home/vagrant/kohaclone/C4/Templates.pm line 121
http://localhost:8081/cgi-bin/koha/reports/reports-home.pl
Bug 15407 sent objects to the template and the selected method is not
defined.
The bug had been highlighted by bug 17425 which dies instead of hides the error.
Not that the "selected" code was not needed, the different elements of
the page never select a specific value.
Test plan:
Apply this patch and confirm that the error is no longuer displayed.
Reproduced. Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new syspef 'DefaultPatronSearchFields' which defines
the fields that should be used when searching for a patron if none are
defined.
To test:
1 - Aply patch, updatedatabase
2 - Ensure patron search has not changed
3 - Add dateofbirth to new pref
4 - Ensure things work wll
5 - Experiment with adding and removing other fields from borrowers
table
6 - prove t/db_dependent/Utils/Datatables_Members.t
Tested together with followup. Works as described.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 14874 (QA Followup)
Fix atomicupdate file name
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Fixes typo "Recieve" in the sample notices
- Adds new notices to it-IT installer
- Turns off feature for existing installations, leaves it
on for new installations
- Fixes typo "cancelation"
- Fixes ids in <body> of new pages
- Adds/fixes classes in th elements of tables
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch fixes some smaller problems:
- Adds new notices to the it-IT installer (xt/sample_notices.t)
- Renames one of the classes used in the table to avoid double up
- Fixes POD of Bilbio.pm by removing a doubled up line
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Place housebound role form inside the 'step 4' section.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt:
Add 'step 4' edit button for housebound role.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Koha/Patron.pm (housebound_role): New method.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Add
section for HouseboundRole information
* members/moremember.pl: Pass HouseboundRole info to template.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Mark
houseboundvisit fields as required.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Remove
toggler class from form, improve look and layout of action buttons.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* members/housebound.pl: Provide full patron hash keys, extended patron
attributes & picture to template.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt:
Refactor to use new information.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* koha-tmpl/intranet-tmpl/prog/en/includes/members-menu.inc: Add a link
to the housebound module view if it is switched on.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Use
".datepicker" class for date input, use `$KohaDates` to filter our iso
dates.
* members/housebound.pl: Use DateTime and Koha::DateUtils to parse
incoming date to ISO format.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* members/housebound.pl: Refactor & store messages for encountered
errors.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Show
messages.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New module to handle management of circulation to Housebound readers.
- Ability to create housebound profiles & scheduled visits for patrons.
- Ability to record users as Deliverers or Choosers (or both), using
extended patron attributes.
- Ability to link choosers and deliverers to individual delivery runs.
- 'Delivery Frequencies' are customizable through authorised
values ('HSBND_FREQ').
* koha-tmpl/intranet-tmpl/prog/en/includes/circ-menu.inc: add
Housebound menu if appropriate.
* Koha/Patron.pm (housebound_profile): New method.
* Koha/Patrons.pm (housebound_choosers, housebound_deliverers): New
methods.
* Koha/Patron/HouseboundProfile.pm: New File.
* Koha/Patron/HouseboundProfiles.pm: New File.
* Koha/Patron/HouseboundVisits.pm: New File.
* Koha/Patron/HouseboundVisit.pm: New File.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: New file.
* members/housebound.pl: New file.
* installer/data/mysql/kohastructure.sql: Add housebound_* tables.
* installer/data/mysql/sysprefs.sql: Add HouseboundModule syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/circulation.pref:
Add HouseboundModule syspref.
* installer/data/mysql/atomicupdate/housebound_tables.sql: New file.
* t/db_dependent/Patron/Borrower_Housebound.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: New file.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: New file.
Test plan:
- Apply patch.
- Run atomic update script.
- Run Unit Tests (t/db_dependent/Patron/Housebound*)
- Optionally, add additional authorised values to 'HSBND_FREQ'.
- Switch on 'HouseboundModule' syspref.
- Ensure 'ExtendedPatronAttributes syspref is on.
- On patron pages, when editing, add some to the Housebound deliverer
and chooser groups.
- On a patron page, the Housebound menu should now be present.
- create housebound profile
+ ensure Frequency values seem pulled from 'HSBND_FREQ'.
- create 'housebound visits' (deliveries)
+ ensure chooser/deliverer lists are populated with patrons that
have the Chooser or Deliverer Attribute type.
- edit visits.
- delete visits.
- Switch off 'HouseboundModule'
- the Housebound menu should disappear
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [Followup] Rename test files.
* t/db_dependent/Patron/Borrower_Housebound.t: Rename to
t/db_dependent/Patron/Housebound.t.
* t/db_dependent/Patron/Borrower_HouseboundProfiles.t: Rename to
t/db_dependent/Patron/HouseboundProfiles.t.
* t/db_dependent/Patron/Borrower_HouseboundVisits.t: Rename to
t/db_dependent/Patron/HouseboundVisits.t.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Bug 5670: [QA Followup] Fix category_type ref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/housebound.tt: Replace
references to `category_type` with `categorycode`.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply the patch
2) Go to saved reports page
3) In the most right column of table you should see "Run" button with
caret button, the first one should run the report, the second one
should work asi menu trigger
4) Ensure that all report actions works as before
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces a new syspref AllowItemsOnHoldCheckoutSCO, so the current
AllowItemsOnHoldCheckout syspref can be decoupled for the SCO module, giving
the library more flexibility.
During upgrade, it gets its value from the original AllowItemsOnHoldCheckout syspref.
Sponsored-by: NEKLS
Signed-off-by: George <george@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the matching-rules.pl page, so it allows the user to choose
from the different hardcoded normalization routines. It is done using TT blocks
and the routine descriptions are translatable.
To test:
- Create some matching rule
- Have free text values on the 'Normalization rule' field
- Apply the patches
- Create a new routine
=> SUCCESS: You can now only choose between fixed option
- Save the rule
- Open it for editing
=> SUCCESS: Chosen rules are preserved
- Edit the original free-text including rule
=> SUCCESS: Rules fall back to 'None'
- Sign off :-D
TODO: A followup will add a warning about the current value and the fact that
saving the matching rule will overwrite those, with 'none'.
Sponsored-by: FIT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When displaying Fines > Account tab for a patron, you can see on screen a Note column that is missing if you click on Print
Test plan :
* Find a patron with accountlines or add them manually (Create manual invoice/credit).
* Be sure some of them got a Note
* Clik on Print fior those lines
Without patch, the printed receipt does not show the Note column
with the patch, the printed receipt shows a Note column and Note content is correctly printed for accountline with a note.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Title and breadcrumb of patron deletion page (deletemember.pl) say:
"Can't Delete Patron". This should be changed to "Delete patron".
To verify:
- Go to a patron's detail page
- Toolbar : More : Delete
Result: You get a question: "Are you sure...", but title and breadcrumb say:
"Can't Delete Patron" rsp "Cant delete patron"
To test:
- Apply patch
- Repeat steps above.
- Verify that title and breadcrumb display properly, including patron's name
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes sentence splitting and other translation issues in
file koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/admin.pref
to avoid odd translations.
To test:
- Without patch, open Home > Administration > System preferences
and go to tab 'Administration"
- Apply patch
- Open the same page in a new window and compare the text:
- Verify that no sentences are splitted
- Verify that the text changes do not introduce misunderstandings
and have the same meaning as without patch
Amended for comment #7 2016-07-12/mv
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Rebased to apply on master and re-inserted test (see comment #14) -2016-09-28/mv
Signed-off-by: Michael Kuhn <mik@adminkuhn.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In detail view (catalogue/detail.pl), when clicking on Edit > Edit
record button, the record editor should be opened with the biblio record
framework. It isn't the case. The Default framework is used. Same issue
with Edit > Edit as new (duplicate).
TO TEST:
1. Find a biblio record using a framework which is not the Default one.
2. See the biblio record in detail view (catalogue/detail.pl).
3. Click on Edit > Edit record.
4. Click on Settings => you can see 'Default' as selected framework.
5. Apply the patch.
6. Repeat step 3-4. => the biblio record framework is selected.
7. Repeat 3-4 using Edit > Edit as new (duplicate).
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Added a test plan
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix the issue, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The problem only when clone a textareas in 5XX
Steps to reproduce error:
- On the cataloging screen (basic screen), create a new record
- Go to the 5xx fields
- Put something on the 521$a subfield or other textareas (e.g. 520$u or
583$x)
- Clone the subfield
=> FAIL: The subfield correctly doesn't include the original data,
BUT it doesn't have the subtield tag either.
- Apply patch
- Clean cache browser and reload page
- Repeat steps above
- Verify that works as expected
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Built on top of bug 17441
Test plan:
Just have a look at the changes. Trivial.
Git grep seleted. No results.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
There are certainly hundred of places where they are not escaped...
Test plan:
Create a patron with "Arun <script>alert('code injection');</script>" in
some of the fields.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This new page (admin/searchengine/elasticsearch/mappings.pl) will permit
to manage the ES mappings.
For the biblios and authorities indexes, the different mappings can be
managed from this single page.
The interface let you add, remove and update mappings and search fields.
It's also possible to reorder the mappings, as the order can be important
in the indexation process. Note that the table can be displayed in a
different order that the one it was before saving, but the mappings are grouped
by search field and the order inside the search field is preserved.
Limitations:
- If something went wrong during the insertion/deletion/modification,
the users will loose all these changes.
TODO:
- Add a specific permission (?)
- Add some data checks client side (JS)
- Use checkboxes for facet and suggestible (lazy today...)
- Understand the difference between the 3 values that sortable can have
and improve the value for the options in the select box.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
In the Staff client, under Circulation > Renew, the message shown after
successful renewal of an item contains broken URLs. This is also true for
the message shown when you try to renew an item that is not checked out.
This patch fixes that.
Test plan:
1) Go to Circulation > Renew, and search for the barcode of a checked-out
item. In the 'Item renewed:' confirmation message, notice how the URLs
for the title and the barcode are broken.
2) Now search for the barcode of an item that is not checked out. In the
'Cannot renew:' message, notice how the URLs are broken here too.
3) Apply the patch.
4) Repeat steps 1) and 2). This time the URLs work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Also adding Marc Veron as bug wrangler (see his mail on the general ml
dated Oct 5).
Test plan:
Verify changes by comparing with Roles for 16.11 page on the wiki.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes event attributes from several tool-related templates.
Events are defined instead in the JavaScript.
To test, apply the patch and:
- Go to Tools -> Label creator -> Manage -> Layouts and edit any layout.
- In the "Font" setting, choose any font which includes the word
"italic" or "oblique" in the name. Doing so should disable the
"Oblique title" checkbox.
- Go to Tools -> Batch patron deletion/anonymization.
- Submit the form without making any changes. You should be prompted
to select an action.
- Go to Tools -> Inventory.
- Select a batch of barcodes to upload.
- Submit the form without selecting any filters. This should trigger a
warning.
- Also changed: Added Font Awesome icons to the "Select all" and
"Clear all" links on the inventory results view.
- Go to Tools -> Notices and Slips.
- Click "New notice"
- Change the selection under "Koha module." The page should reload
with the correct available message body fields. For instance,
selecting "Holds" should make available reserves.* columns.
- Go to Tools -> Upload.
- In the search form, enter a search term and click the 'Search'
button. The form should submit.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Event attributes removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes event attributes from several templates, moving event
definitions into the JavaScript instead.
To test, apply the patch and:
- View the MARC detail page for any bibliographic record. Changing the
framework selection should reload the display using the selected
framework.
- Perform the same test on the labeled MARC view. (Set the
viewLabeledMARC system preference to "Allow" if necessary).
- To test the changes to Reports you should have at least one report
group and at least one report subgroup.
- Create a new saved SQL report.
- Select a report group. Doing so should trigger the display of report
subgroups. Deselecting the report group should hide the subgroups.
- In Acquisitions -> Suggestions, create a new suggestion.
- In the 'Acquisition information' section, changing values for
copies, currency, and price should change the value in the total
field.
- In Circulation -> Upload offline circulation file:
- My patch for Bug 16602 added the required code but forgot to remove
the corresponding onclick attributes.
- Browse for an offline circulation file.
- Clicking the 'Upload file' button should work correctly.
- After uploading a file, both the 'Add to offline circulation
queue' and 'Apply directly' buttons should work to trigger their
corresponding processes (keeping Bug 16603 in mind).
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This new enhancement will add the ability to change the default holdings
sort on OPAC displays to be by library, instead of item type.
This patch adds a new pref OPACHoldingsDefaultSortField with 3 different
possible values:
- Item type
- Home library
- Holding library
Note that if OpacLocationBranchToDisplay is set not to display home libraries,
unexpected behaviors might happen if OPACHoldingsDefaultSortField is set to
"Home library", same for "Holding library".
Test plan:
- Confirm that the default value for OPACHoldingsDefaultSortField is
'first column' after executing the DB entry and that there is no
change in the behavior (first column is used to sort the holdings
table on the detail page).
- Set OpacLocationBranchToDisplay to both and play with the different
values of OPACHoldingsDefaultSortField
=> Confrm that the default column used to sort the table is correctly
changed
- Set the pref SeparateHoldings on
=> Confirm that both tables (Holdings and other holdings) are sorted using
the OPACHoldingsDefaultSortField value.
Sponsored-by: University of the Arts London
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Checkout some items to a patron
2 - Note there is no 'Home library' column
3 - Apply patch
4 - Note there IS an 'Home library' column
5 - Use the columns configuration and ensure you can hide/display column at
will
Sponsored by: Coeur d'Alene Public Library (http://www.cdalibrary.org/)
Works as expected (after clearing browser cache).
Commit message amended (as of comment #7)
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Change single quotes to double quotes also add brackets to serial
enumeration.
To test follow previous test plan for intranet.
Fix double semicolon
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
1. THE CHECKOUT TAB, INTRANET
1.1. Add a value to the 'h' subfield of an item. ie: 'volume #42'
1.2. Check out the item to a patron
1.3. Display this patron's issues in his checkout page
1.3.1. The enumchron should be concatenated with the title
2. A PATRON'S RELATIVE, INTRANET + OPAC
1.1. Add somebody to a patron's guarantee list
1.2. Checkout a serial to this guarantee
1.3. Visit the guarantor's OPAC and INTRANET checkout page
1.3.1. You should see the enumchron in his guarantee's issues
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At one time it was possible to store the results of a report into the
saved_reports table.
This allowed the librarians to compare different results, from the Koha
interface.
This patch is a proof of concept and is not very polished (understood:
it cannot be pushed like that).
Test plan:
Execute the runreport.pl cronjob script with the new --store-results
option.
This will serialize into json the results and put it into the
saved_reports table.
On the "Saved report" list, the "Saved results" column is now populated
with a date (note that you can have several date for a given report).
If you click on this link, the data will be displayed in a simple table.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the staff client, when creating an order from a subscription
the vendor name should be shown in a separate column.
This patch adds that feature. The 'Vendor' column is added before
the 'Library' column since they appear in that order in Advanced
search.
Test plan:
0) [PREREQUISITES] In the Staff client, under Acquisitions, create
a Vendor and associated Basket if you don't already have them.
Then, under Serials, add a new Subscription using the Vendor
you've just created.
1) Go to Acquisitions, and under 'Manage orders' search for a vendor,
then click on 'Add to basket' and select 'From a subscription'.
2) Click 'Search' on the left hand side to search for all subscriptions.
Notice how there is no 'Vendor' column in the results table.
3) Apply the patch.
4) Repeat step 2. Confirm that the patch works, i.e. there is now
a 'Vendor' column which displays the vendor name.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a holdingbranch column to waitingreseves.tt and
separates 'Location' into Home branch and callnumber columns
To test:
1 - Have some holds waiting and holds over
2 - View the report before the patch
3 - Note that location contains homebranch and call number
4 - View the report after the patch
5 - Note the new columns
6 - Ensure data is correct and no info has been lost
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed 2 capitalization issues.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See http://hea.koha-community.org/, the countries are filled is wrong
values.
If we decide to update the free text with a dropdown list, we need to
handle these wrong data.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This will avoid syntax problems with Hea when a user will fill this 2 sysprefs
The default choice for UsageStatsLibraryType and UsageStatsCountry is 'empty'
Test Plan
---------
1. Create a new Koha install
2. Go to the 'Administration' page
3. Go to 'Global system preferences'
4. Go to 'Administration'
5. At the end of this page you should see a dropdown menu for
- UsageStatsCountry with all countries
- UsageStatsLibraryType with all type of library
They both should be empty by default.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a complete list but is a start
Lots of new strings to translate :)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With this patch when <zebra_bib_index_mode> or <zebra_auth_index_mode> are set to 'grs1'
it appears a link to https://wiki.koha-community.org/wiki/Switching_to_dom_indexing
instead of a misleading information.
To test:
a)Insert 'grs1' in <zebra_bib_index_mode> or <zebra_auth_index_mode> (file koha-conf.xml)
b)It appers a misleading warning
c)Apply the patch
d)It appears a link to https://wiki.koha-community.org/wiki/Switching_to_dom_indexing.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The following three templates are using [% guarantorborrowernumber %]
while they should be using [% guarantor.borrowernumber %]:
members/members-toolbar.inc
members/moremember-brief.tt
members/moremember.tt
This doesn't result in any breakage; just a couple of 'Edit' links that
do not pass the guarantorid in the URL, and one case where guarantor
information is not shown in the staff client.
This patch fixes that.
Test plan:
0) [PREREQUISITE] Create a patron with a guarantor if you don't have one.
1) Go to Home > Patrons and search for a patron that has a guarantor. In
the Details page for that patron, the 'Edit' link in the toolbar does
not pass the guarantor's id in the URL (...&guarantorid=&...).
2) In the same page, the 'Edit' link under the patrons name (immediately
under 'Guarantor') again does not include the guarantor id in the URL.
3) Go to Home > Patrons and click on 'New patron'. Pick any category from
the drop down menu. Enter the Surname, First name, and Date of birth
of the patron you used in step 1). This triggers the 'Duplicate patron
record?' warning -- click on 'View existing record' and notice how the
guarantor information is missing.
4) Apply the patch.
5) Repeat steps 1), 2), and 3) above. The URLs are fixed and patron info
is showing.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the Staff client, under Circulation -> Circulation reports,
the date shown in the heading of the 'Holds awaiting pickup'
report is not formatted according to the 'dateformat' system
preference.
This (trivial) patch fixes that.
Test plan:
1) In the Staff client, go to Circulation and under 'Circulation
reports' click on 'Holds awaiting pickup'
(cgi-bin/koha/circ/waitingreserves.pl).
2) Observe that the date shown in the heading is always formatted as
yyyy-mm-dd regardless of the value of the 'dateformat' syspref.
3) Apply the patch.
4) Re-visit the 'Holds awaiting pickup' report. Confirm that the patch
worked, i.e. the date shown in the heading is formatted according
to the 'dateformat' system preference.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Because seasons strings are not available through DateTime module,
names of them where added in code, and templates. Bug 16289 adds new
abbreviated form to the code, but not to the templates. This patch
should fix the problem.
To test:
1. Apply patch.
2. Run "misc/translator/translate update" for you language.
3. Check if names are in po/ file for language.
4. Check if generating next issue for serial and prediction patterns
works correct.
NOTE: or "create {language code}" instead of update.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When the itemBarcodeFallbackSearch syspref is on, the wording in the
interface should reflect that you can enter a barcode OR a keyword.
Additionally, in the results of a keyword search the "Fast cataloging"
link should be more descriptive. This patch fixes these issues.
Test plan:
0) [PREREQUISITES] Ensure you have a Fast Add ('FA') framework defined,
and that your itemBarcodeFallbackSearch syspref is set to 'Enable'.
1) Go to Circulation -> Check out, search for a patron, then select a
patron to Check out. Notice how the text above the textbox reads
"Enter item barcode:".
2) Type something generic (not a barcode) in the textbox so that you'll
get at least one item as a result. Notice how the text in the yellow
warning box reads "The barcode was not found: <terms> Fast cataloging".
3) Apply the patch.
4) Repeat step 1), now the text above the textbox should read
"Enter item barcode or keyword:".
5) Repeat step 2), now the text in the yellow warning box should read
"The barcode was not found: <terms> Add record using fast cataloging".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a report is duplicated from the report list, the new report will
contain the tag (<<YEAR>> for instance), but from the reports results
page it copies the values used for the results.
Test plan:
Create a new sql report with tags
Duplicate it from the report list: no expected changes
Run it and duplicate it: the tags must not have been replaced
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Ran and duplicated a report, the tags remained intact.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since bug 16157, the location value is always "All" and the serial
search won't return anything.
Test plan:
Search for some serials.
Without this patch, it won't return any results
With this patch applied, the result search should be consistent
Reproduced with serial's "Advanced search" and search filter in
left hand column. Fixed by this patch.
Signed-off-by: Marc <veron@veron.ch>
Advanced search works fine again.
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 14655 added a warning to the about page ("System information" tab)
if the AnonymousPatron feature is not correctly configured.
But actually there is one case when it's not displayed.
Test plan:
Set AnonymousPatron to a non existing patron
Set at least 1 borrowers.privacy == 2
go on the about page.
Without this patch you do not get the warning
With this patch you will see "Some patrons have requested a privacy on
returning item but the AnonymousPatron pref is not set correctly. Set it
to a valid borrower number if you want that this feature works
correctly."
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previous patch but for the staff interface
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
catalogue a bibliographic record with a isbn=
</title><script>alert('XSS')</script>
Go on the detail pages.
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
catalogue a bibliographic record with a author=
</title><script>alert('XSS')</script>
Go on the detail pages.
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
catalogue a bibliographic record with a title=
</title><script>alert('XSS')</script>
Go on the detail pages.
=> Without this patch you will see the alert
=> With this patch, no more alert
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This of course means that any html in the title will no longer be
evaluated. :
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies the acquisitions uncertain prices template to remove
event attributes onclick and onchange.
Also changed on the uncertain prices page: Added a label to the orders
filter, removed redundant form submit function.
- Locate a vendor which has orders with uncertain prices
- Click the 'Uncertain prices' tab in the left-hand sidebar
- Enter invalid data in the "price" field for any order. Confirm that an
error is triggered when the field loses focus.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
QA Revision: Corrected input type of submit button.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the use of 'onclick' from the acquisitions transfer
order process. The patch also modifies the style of some links and
buttons to conform with current guidelines.
- Locate an open basket with items in it
- Click the 'Transfer' link for a title in the basket
- In the pop-up window:
- Confirm that the 'Cancel' button at the bottom of the window is a
Bootstrap-style button.
- Search for a vendor; Confirm that the 'Choose' link is a
Bootstrap-style button.
- Choose a vendor; Confirm that the 'Choose' link on the following
page is a Bootstrap-style button.
- Confirm that clicking the 'Choose' button transfers the item to the
correct basket.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies the funds administration page and other files
related to the process of searching for and selecting fund owners and
users in order to remove the use of event attributes like 'onclick.'
Also changed in this patch: I have revised the way the "select owner"
and "select user" controls look. They are now links with Font Awesome
icons.
- Go to Administration -> Funds and open a fund for editing.
- Test the process of adding and updating an owner:
- Click the 'Select owner' link.
- Search for and select an owner in the pop-up window.
- Save the fund and verify that the owner was saved correctly.
- Perform the same test with the 'Remove owner' link.
- Use the same process to test the addition and removal of users.
- Confirm that the 'Remove' link works correctly before and after
submitting the form to save changes to the fund.
This patch changes a file which is used by both the funds template and
the template used when setting a guarantor on a patron. To test the
changes in that context:
- Open a 'child' type patron record.
- Under 'Guarantor information,' test the process of setting and
removing a guarantor to confirm that data is saved correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is a followup to rescue the bug.
To test: Follow test plan from comment #1
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some librarians find it useful to know what category a patron is before
confirming a reserve or transfer from the checkin screen.
This patch adds the patron category to the hold and transfer popups
to the patron information already displayed. The li tags that contain
the patron category have the class "patron-category" to allow this data
to be easily hidden.
Test Plan:
1) Apply this patch
2) Trap a hold for a patron, note the patron category is now displayed
3) Trap a hold for pickup at another loation, note the patron category
is now displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes a minor change to the markup to make the button in the
confirmation dialog conform to the appearance of similar buttons.
To test, follow the original test plan for this bug and verify that the
"OK" button in the dialog looks correct.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In previous versions of Koha, if a hold canceled from the "Holds over" tab had other holds on it,
the librarian would be alerted with the message "This item is on hold for pick-up at your library"
and directed to check it in to fill the next hold. This no longer happens.
Test Plan:
1) Apply this patch
2) Find a hold that has been waiting too long
3) Cancel that hold via waitingreserves.pl
4) Note you get the message "This item is on hold for pick-up at your library"
5) Confirm the ok button redirects you to the correct tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an attacker can get an authenticated Koha user to visit their page
with the
url below, they can change or delete patrons' images
/tools/picture-upload.pl?op=Delete&borrowernumber=42
Test plan:
1/ Hit /tools/picture-upload.pl?op=Delete&borrowernumber=42
And confirm that you get a "Wrong CSRF token" error
2/ Go on the patron detail page with a patron's image
3/ Click on the Delete link (note the csrf_token param)
4/ The image will be deleted and you are redirected to the patron detail
page.
Regression tests:
Upload an image from the patron detail page and from the "upload patron
images" tool.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To reproduce:
1/ cp your_image.jpg 'test<svg onload=alert(1)>.jpg'
2/ Use the upload picture tool to upload this file
=> Without this patch, the alert is show
=> With this patch, the filename is correctly displayed and no alert
Note that the cardnumber var was not escaped neither, it's now.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the same change as the previous one to the batch patron
deletion tool.
If the pref TrackLastPatronActivity is enabled, the librarians will be
able to delete patrons who do not have been connected since a given
time.
Test plan:
Define a date for the "who have not been connected since" options and
confirm that it works as expected.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes the display of informational messages during and
after the batch record modification process. Instead of showing a
separate dialog for each record modified, messages are now grouped into
one dialog.
To test, apply the patch and clear your browser cache if necessary. You
must have at least one MARC modification template defined.
- Go to Tools -> Batch record modification.
- Submit a list of biblionumbers which contains at least one number
which doesn't exist in your database.
- Confirm that warning and success messages are grouped instead of
showing in separate dialogs.
- Submit a list of biblionumbers using a MARC modification template
which contains no actions. Confirm that the resulting error message is
correctly formatted.
Revision formats the error messages without the unordered list, which
was giving them padding which didn't look correct inside a dialog.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Edit for QA: Removed obsolete changes to CSS.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It's easier to use jQuery selector to know if checkboxes are checked.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The reason this happens is because the page will say success when the
total number of records given equals the total number of successful
deletions. If you pass in no records, there are no successful deletions
--> 0 = 0 --> it thinks it has been successful. This patch adds a check
that validates if any checkboxes were selected before submitting the
final form.
I have removed the check for if any records were selected AFTER the form
has been submitted because it seemed unnecessary if the form can't be
submitted without selection of records anyway.
To test:
1) Go to Tools -> Batch record deletion
2) Put in a record number and click Continue
3) Deselect the record so that it doesn't actually delete and click
Delete selected records
4) Page says 'All records have been deleted successfully!'
5) Apply patch. Go back and repeat step 3
6) Form should not submit and you should receive an alert saying that no
records have been selected.
7) If you try selecting and deleting a record after this alert, it
should still work
Note: Have also changed the wording of error in Step 1 when you are
entering record numbers to delete.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Uses a dialog box to warn of unique fields not copying, dialog was in
place for barcode generation so removed the extar modal completey
- Fixes a problem when barcode was undefined and autobarcode on
- deleted an extra space in Barcodes/hbymmincr.pm
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch add an 'Add multiple copies' button on the new order page in
acquisitions. While processing the multiple copies a modal is
displayed.
To test:
1 - Add an order to an acquisitions basket
2 - Choose to add multiple items
3 - A modal shouold warn about ignoring UniqueItemFields from syspref
4 - When submitting the modal should popup until all items are processed.
5 - The modal should disappear after items are added.
6 - Items should be cloned, minus unique fields
7 - Enable autoBarcode for various formats, ensure you are warned that
barcodes will be generated, and ensure they are generated correctly
Sponsored by: Middletown Township Public Library (http://www.mtpl.org)
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes instance of "onclick" from the templates for serial
frequency and numbering management. Events are now defined in the
JavaScript.
To test, apply the patch and go to Serials -> Manage frequencies.
- In the list of frequencies, click the "Delete" button for a frequency
which is in use by at least one subscription. In the confirmation
dialog, clicking the "Show subscriptions" link should display a list
of titles.
- Edit or create a frequency.
- To test that the form submission validation is still working
correctly, enter non-numeric data in the "issues per unit" field and
submit the form. This should trigger an error.
In Serials -> Manage numbering patterns:
- In the list of numbering patterns, click the "Delete" button for a
pattern which is in use by at least one subscription. In the
confirmation dialog, clicking the "Show subscriptions" link should
display a list of titles.
- Edit or create a numbering pattern.
- Confirm that the "Test pattern" button works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Various fixes.
Test plan:
Once the makePreviousSerialAvailable syspref is enabled, receive a serial, and then another, then check that:
- the first received itemtype has been set to the "previous item type" value (set in the subscription).
- the first received has been made available.
- the last received serial itemtype has been set to the "item type" value (set in the subscription).
- 995$l is automatically prefilled.
Configure the serialsFieldsToAV syspref. When creating or editing a subscription, check that:
- the domain and/or origin and/or support fields are correctly displaying the authorized values configured in the syspref.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When enabling the makePreviousSerialAvailable syspref, the previously
received serial's itemtype is set as defined in the subscription.
(Please note that the item-level_itypes syspref must be set to specific item.)
It is also made available.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
http://bugs.koha-community.org/show_bug.cgi?id=7767
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The patron details page always show the logged in library as the
patron's home library instead of the true home library. This bug is
particular to moremember.pl and does not affect other patron pages.
Test Plan:
1) Find a patron with a home library other than the logged in library
2) Note the patron home library as shown on moremember.pl matches
the logged in library and not the patron's true home library
3) Apply this patch
4) Reload moremember.pl, the correct home library should display!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When editing a bibliographic record, if you switch the framework to
default, the page is reloaded but the framework is not changed.
From the pl script, you can see that the frameworkcode is set to the one
of the biblio if set to false. The empty string, which means default,
should be taken into account.
Test plan:
- Create a record using the Fast add framework
- Save the record
- Open the record for editing
- Use the "Settings" pull down to change the framework to default
- Try another framework
- Try changing to default from there
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15859 introduced a problem in the basic cataloging editor by
removing a form field which the Z39.50 search button tries to use when
triggering the search window pop-up. This patch corrects the error by
changing where the script looks for the required framework code.
To test, apply the patch and got to cataloging.
- Edit a record which uses the default framework.
- Confirm that the Z39.50/SRU search button works correctly to trigger
the pop-up window.
- Repeat the test with a record which uses a different framework.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Working again, great!
Signed-off-by: Andreas Roussos <arouss1980@gmail.com>
Patch works fine.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use REST API
If cancelled return to previous selection
If fail return to previous selection
Use fa spinning icon while waiting
Disable select while waiting
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Place some holds for a patron
2 - Load the patron into checkout module
3 - View thier holds tab, should have a dropdwon for location
4 - Alter the location
5 - You should recieve a confirmation box
6 - Confirm that pressing cancel does not update holds
7 - Confirm that pressing Yes does update the hold
8 - Confirm that waiting holds are not updateable
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you notice a typo in your invoice number after finishing with the
receiving process, the only way to correct it right now is in the
database - or by undoing all the steps and starting over.
It would be nice if the invoice number could be edited.
Test Plan:
1) Apply this patch
2) Browse to acqui/invoice.pl for an invoice
3) Note the new "Invoice number" field contains the existing invoice
4) Alter the invoice number
5) Save the invoice
6) Note the invoice number has been updated
7) Edit the invoice again
8) Attempt to save the invoice with an empty invoice number field
9) Note that you cannot save the invoice without having an invoice number
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds holding library ("current location") to the list of
fields available in the item search form.
To test, apply the patch and go to Search -> Item search.
- Perform a search using the "current location" option and verify that
it returns the correct results.
- Try other searches to confirm that they work as before.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Default timeout is now 12000000 seconds == almost 139 days !
Surely, your session will be shorter. But we should lower this
value.
Balancing usability and security, I propose 1d (1 day) now.
Current pref value will be affected only if it is NULL or equal
to the old default.
Test plan:
Check your current value. Optionally change to NULL or 12000000.
Run the dbrev and see what happens.
Beware of cached values while testing or flush the cache.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Tools -> Koha News
2) Click 'Delete selected' button without selecting anything
3) Notice you are asked to confirm if you would like to delete ... but
you didn't choose anything to delete
4) Apply patch and refresh page
5) Click 'Delete selected' button without selecting anything
6) Should see alert.
7) Select one or more news items to delete and click 'Delete selected'
button
8) Should be asked to confirm
9) Confirm that the delete works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Have changed the wording of the MARC button to Show MARC to be
consistent with other places in Koha.
To test:
1) Go to Authorities -> New from Z39.50
2) Put in any search terms and click Search
3) Confirm that both options (MARC and Import) now show as buttons "Show
MARC" and "Import" under one "Actions" column with approriate icons
4) Confirm buttons work as expected
5) Confirm buttons do not wrap on narrower browser
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Serials
2) Click New subscription or edit an existing one
3) Click Search for a vendor
4) Make a search that will return no results (i.e. has a typo etc.)
5) Confirm there is an appropriate message
6) Go back and make a search that will return results (i.e. putting in one letter
'a' etc.)
7) Confirm that heading is worded better and search term is displayed
8) Go back and make search without entering any search terms
9) Confirm that heading is worded better, no search term is displayed
Sponsored-by: Catalyst IT
Patch behaves as dexcribed.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> MARC bibliographic framework
2) Go to Actions -> MARC structure for any framework
3) Click Subfields
4) Confirm Edit and Delete links show as buttons with appropriate icons
in one column called 'Actions'
5) Confirm buttons do not wrap on narrower browser
6) Confirm buttons behave as expected
Sponsored-by: Catalyst IT
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> MARC bibliographic framework
2) Go to Actions -> MARC structure for any framework
3) Confirm that three links, Subfields, Edit and Delete, now show in
drop-down menu with appropriate font awesome icons
4) Confirm that Subfields takes you to the right page and Edit and
Delete work as expected
Sponsored-by: Catalyst IT
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the column heading and makes all links show as font
awesome buttons. I have also changed the wording from Preview MARC to
Show MARC to shorten the button and be consistent with other places in
Koha
To test:
1) Go to Tools -> Batch record modification
2) Put in some record numbers and click Continue
3) Ensure column heading 'Preview' no longer shows, and buttons are
showing with an appropriate icon. Confirm button still works as
expected.
4) Confirm button does not wrap on narrower browser
Sponsored-by: Catalyst IT
Works as described
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch revises the batch patrons modification template, removing
"onclick" attributes from the markup and defining those events in the
script.
To test you should have at least one extended patron attribute
configured.
- Apply the patch and go to Tools -> Batch patron modification.
- Submit a batch of patrons for modification.
- Confirm that the checkbox next to any required field is disabled.
- Select a date in the registration date and expiry date fields. Confirm
that the "Clear" link next to each empties the correct field.
- Click "New" next to a patron attibute. A copy of the patron attribute
line should be created.
- Click "Delete" next to a cloned patron attribute. The correct line
should be removed.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removes template var csrf_error and associated handling.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restested with opac and intranet: Still sends or dies elegantly..
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
No need to send OPACBaseURL to the template, if you load the Koha TT
plugin inside the template.
Test plan:
Send a few items in your cart from OPAC and intranet.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If you have no (valid) token, you will not be able to send the message.
Test plan:
[1] Verify if you can still send the cart from opac and intranet.
[2] While still being logged in, try to send the cart from opac by
using the following URL:
/cgi-bin/koha/opac-sendbasket.pl?email_add=you@somedomain.com&comment=csrf_test&bib_list=doesnotmatter&csrf_token=justsomeguess12345
This should now result in a csrf error.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are several administration templates which still contain event
attributes. This patch move event definition to the JavaScript.
To test you must have the SMSSendDriver system preference set to
"Email." Apply the patch and go to Administration.
- In Global system preferences, change the value of any input or select
and then click the "Cancel" link for that section. After confirming
your choice, the page should reload with your changes reset.
- In Circulation and fine rules, edit any existing rule. In the editing
row, click the "Clear" button. The data for that rule should be
cleared.
- In Transport cost matrix, make any change to the matrix. Submitting
the form should work correctly.
- In MARC bibliographic framework, choose 'MARC structure' for any
framework.
- Checking or unchecking the 'Display only used tags/subfields'
checkbox should reload the page and change the display according to
your choice.
- In Did you mean?, make changes to the existing configuration.
- Clicking "Cancel" should reload the page and discard your changes.
- Clicking "Save configuration" should correcly save your changes.
- In SMS cellular providers, click to edit any existing provider.
Clicking the "Cancel" link should cancel the editing process and
return you to the list of providers.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes event attributes from two include files:
cat-toolbar.inc and members-toolbar.inc.
In cat-toolbar.inc an unused <form> tag with an "onsubmit" attribute has
been removed.
To test, apply the patch and:
- View the detail page for any bibliographic record. All toolbar buttons
("New," "Edit," "Save," etc.) should work as expected.
- View the detail page for any patron. Click the "Add message" button in
the toolbar. Selecting a predefined note should correctly populate the
textarea with your selected message.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds the links to EDI Accounts and Library EANs
to the menu on the left of the Acq module.
To test:
* Log in to Koha
* Visit Acquisitions
* Confirm that EDI links show on the menu on the right
if you have permissions to access EDI.
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This splits off the delete capability from the create reports permission.
From a UI perspective there were CSS issues, that this patch set hackily
bypasses. Perhaps someone else can amend this enhancement with the required
changes so that the extra column at the beginning of the table can be
removed when the user does not have delete capability.
TEST PLAN
---------
1) back up db
2) apply patch
3) ./installer/data/mysql/updatedatabase.pl
-- should run without issue.
4) in mysql:
> drop database ...
> create database ...
-- totally blanks it for fresh web install
5) run web install
-- installing should have no issues
6) go to a patron
7) set permissions
8) expand the reports permission
-- should have delete reports now
9) click help and scroll down to
'Granular Reports Permissions' right at the bottom.
-- there should be a new delete_reports section
10) Head over to guided reports and build a few reports.
-- as system account user, delete stuff should all be visible.
11) Find a patron, set all permissions, except delete reports.
12) log out and then log in as the modified patron
13) Head over the save reports
-- none of the delete options should be available to the user.
14) run koha qa test tools
15) restore db
Followed test plan. Additionally tried to delete using params in URL
(not possible, OK)
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes instances of "onclick" from the serials templates for
patron and vendor search.
To test, go to Serials and click "New subscription."
- In the new subscription form, click the "Search for a vendor" link.
- In the popup, search for a vendor. Confirm that clicking "Choose"
selects the correct vendor.
- From the detail page of an existing subscription, click "Create
routing list."
- Search for a patron and test that the "Add" button in search results
works correctly to add patrons to the routing list.
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the use of event attributes from the subscription add
template and the template for testing prediction patterns. Events are
now defined in the JavaScript.
To test, go to Serials -> New subscription.
- Test that the "Search for vendor," "Search for record," and "Create
record" links work correctly.
- Test the "Next" button without entering a vendor or a biblionumber.
You should be warned about selecting a vendor and biblionumber.
- After selecting a bibliographic record to link to the subscription,
click the "Next" button. The second section of the subscription add
form should be displayed.
- Under frequency, choose "1/day."
- Confirm that the "Show advanced pattern" link correctly toggles
display of the advanced pattern form.
- Under the advanced pattern form, test the "Modify pattern" button. It
should enable editing in the form.
- Test the "Cancel modifications" and "Save as new pattern" buttons.
- Test the "Test prediction pattern" button.
- In the "Prediction pattern" box, test that the checkboxes next to
each day of the week, when checked, trigger the corresponding issue
number to be marked as "not published."
- Finally, confirm that your subscription is saved correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Serials
2) Click Advanced Search in the toolbar at the top
3) Notice heading says Serials subscriptions (0 found) before a search has even happened
4) Apply patch and click Advanced Search again
5) Heading should now say Serials subscriptions search
6) Submit search
7) Heading should say how many subscriptions your search found (like before)
Sponsored-by: Catalyst IT
Signed-off-by: Marc <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies several serials module templates to remove the use
of event attributes. Events will now be defined in JavaScript.
Also changed:
- In Serials -> Check expiration, custom form validation has been
removed in favor of validation with the plugin.
- In Serials -> Claims, the "Clear filter" button has been replaced with
a link. Error messages are now styled with the standard "alert" class.
- In Serials -> New subscription -> Search for record, the "choose" link
is now a Bootstrap button. Pagination links are now styled like other
similar links. The "Close" button is now styled as in other popup
windows. The "no results found" messages is styled as an informational
dialog.
- In Serials -> Subscription -> Edit routing list, the "add recipients"
and "delete all" controls are now links with Font Awesome icons.
To test, apply the patch and:
- Go to Serials -> Check expiration.
- Try to submit the form without filling in a date. The form
validation plugin should warn you that the date field is required.
- Submit the form using data which will return results.
- Click the "Renew" button for any result. The subscription renewal
popup should be triggered for the correct title.
- Go to Serials -> Claims.
- Select a vendor with missing issues.
- Confirm that the date filter works correctly, and that the "Clear
filter" link works.
- Select one or more result and click the "Send notification" button.
The notification should be sent.
- Go to Serials -> New subscription.
- Click the "Search for record" link to trigger the bibliographic
search popup.
- Perform a search. Confirm that the "Choose" button selects the
correct record and populates the fields in the parent window.
- Go to Serials -> Subscription -> Edit routing list.
- Confirm that the process of adding recipients to the list works
correctly.
- Confirm that changing the rank of any recipient works correctly.
- Save the routing list and click the "Save and preview routing slip"
button on the confirmation page. The slip preview should open.
- In the slip preview window, test that the print button works
correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
QA revision: Removed stray '// -->' and corrected clear filter function
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch revises the edit and delete buttons on the course reserves
detail page so that they are styled as Bootstrap buttons with Font
Awesome icons.
To test, apply the patch and choose or create a course reserve which has
in it at least one lost item and at least one item which is checked out.
- In the list of items on the course reserve detail page, confirm that
the 'Edit' and 'Delete' buttons are correctly styled.
- Confirm that for the checked out item the delete button is disabled.
Hovering over the button should trigger a tooltip. Clicking the button
should trigger an alert.
- Confirm that for the lost item the same is true.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Buttons styled as Bootstrap. Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch revises the manage staged MARC records template, removing
"onclick" attributes from the markup and defining those events in the
script.
To test, apply the patch and go to Tools -> Manage staged MARC records.
- If necessary, stage a MARC file for import.
- Click the name of the staged file and then the "Import this batch into
the catalog" button. The batch should be correctly imported.
- Return to the list of staged MARC files.
- Click the name of an imported file and then the "Undo import into
catalog" button. The import should be reverted.
- Return to the list of staged MARC files.
- Click the "Clean" button for any record. Confirm that the batch is
cleaned.
- For any cleaned record, click the "Delete" button. The batch should be
deleted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
QA revision: Corrected class name so that "delete" button triggers the
correct warning.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine was only used in one script and its job is the same as
GetAuthorisedValueByCode.
It's better to use the AuthorisedValues TT plugin to retrieve AV
descriptions.
Test plan:
Edit a patron with sort1 and/or sort2 defined.
On the patron details page (members/moremember.pl) you should see the
sort1 and/or sort2 info displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to serials -> Search a subscription (or make a new one)
2) Ensure that subscription has an end-date that has passed or will pass soon
3) Go to Serials collection (left sidebar menu)
4) Ensure that Subscription summary table has two buttons, Create routing list and Renew. These buttons should be bolded and the table cell highlighted
5) Ensure 'Print list' is a button in year tables below
6) Edit subscription to have a later end-date (will not expire soon)
7) Go back to serials collection
8) Ensure that table cell is no longer highlighted and buttons not bolded. Renew button should not be there.
9) Ensure that both buttons do not wrap when the browser is narrow
Sponsored-by: Catalyst IT
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> EDI accounts
2) Click Help in top-right corner
3) Confirm that Help window opens with appropriate help text
4) Confirm links work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed link to the manual: cat -> acq
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> Library EANs
2) Click Help in top-right corner
3) Confirm that Help window opens with appropriate help text
4) Confirm link to manual works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed link to the manual.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Several templates have an "onblur" event attribute in the markup. This
patch moves the onblur event definition into the JavaScript.
To test, apply the patch and clear your browser cache if necessary.
In Administration -> Authority types:
- Choose "New authority type."
- Enter any text into the "Authority type" field.
- Moving the cursor focus away from this field should convert your
text to uppercase.
In Administration -> MARC bibliographic framework:
- Choose "New framework."
- Enter any text into the "Framework code" field.
- Moving the cursor focus away from this field should convert your
text to uppercase.
In Administration -> Currencies and exchange rates:
- Choose "New currency."
- Enter any text into the "Currency" field.
- Moving the cursor focus away from this field should convert your
text to uppercase.
In Administration -> Item types
- Choose "New item type."
- Enter any text into the "Item type" field.
- Moving the cursor focus away from this field should convert your
text to uppercase.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes several improvements to the EDIFACT messages template
to make it more consistent with similar interfaces in Koha. Changes to
edimsg.tt are made to simplify the display of the data in a modal.
This patch also corrects a couple of markup errors.
To test you must have multiple rows of data in the edifact_messages
table. I tested with dummy data I inserted manually. Should should have
some rows which use 'QUOTE' and 'ORDERS' as the message_type.
To test deletions you may need to apply the patch for Bug 16737.
- Apply the patch and go to Acquisitions -> EDIFACT messages.
- In the table of messages, the date should be displayed according to
your system preference.
- Sorting by date should work correctly regardless of date format
setting.
- The 'Actions' column should contain 'View message' and 'Delete'
Bootstrap-style buttons with Font Awesome icons. The column should be
unsorted.
- Clicking the 'Delete' button should prompt you to confirm.
- Clicking the 'View message' button should trigger a modal which loads
the message data.
- Test the page with no messages or when all messages have been
deleted. The page should display a standard message dialog instead of
an empty table.
Signed-off-by: Nicole C Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates several label creator templates to remove the use of
"onclick" in favor of defining click events in JavaScript.
Also changed:
- Replaced the non-existant element <icon> with <i>
- Removed the use of <center> and 'align="center"';
- In the item search results template:
- The use of the checkboxes jQuery plugin has been replaced with
straight jQuery for simplicity's sake.
- Output of table headers has been modified so that translatable
strings are in the template instead of having English strings
passed from the script.
- Moved the 'Add checked' and 'Done' buttons into a floating toolbar.
To test, apply the patch and go to Tools -> Label creator.
- Choose New -> Label batch
- Click 'Add items'
- Perform a search for items.
- Confirm that 'select all' and 'clear all' links work.
- Confirm that clicking an individual 'Add' button works.
- Select multiple items and click the 'Add checked' button. Confirm
that the selected items were added to your batch.
- Click 'Add items' again to save the selected items to your batch.
- Test that the 'Delete' and 'Export' buttons next to any item work
correctly.
- Choose Manage -> Label batches
- Test that the 'Delete' button works correctly.
- Select one or more batches and test that the 'Export selected'
button works correctly.
Revision: Removed changes to pagination in the item search results
template since it didn't work.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Admin -> Global sysprefs
2) Turn on HTML5MediaEnabled and HTML5MediaYouTube
3) Go to Cataloging and create a new record
4) Catalogue a YouTube link in 856$u and save record. Do not add any items (click Normal tab)
5) Confirm that Play media tab is the selected tab by default
6) View record on OPAC and confirm Play media tab is selected by default
7) Go back to staff client, add an item then go back to Normal tab
8) Confirm that Holdings tab is now selected by default
9) Confirm Holdings tab is selected by default on OPAC
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No errors
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Acqui -> EDIFACT messages
2) Click Help in top-right corner
3) Confirm that Help window opens with appropriate help text
4) Confirm link to manual works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From qa tools:
reports/cat_issues_top.pl: pod: =over on line 39 without closing =back
Note: qa tools does also report "options_for_libraries: not found" on two
template includes. Considering this as a false alarm, since the block is
defined in another include loaded in doc-head-open.
[1] koha-tmpl/intranet-tmpl/prog/en/includes/subscriptions-search.inc
[2] koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-topissues.inc
Found a template where a USE Branches was missing:
koha-tmpl/intranet-tmpl/prog/en/modules/serials/subscription-add.tt
Easy to spot since the libraries combo was empty.
Tried to find similar occurrences with few greps, but couldn't find any.
I did find duplicate USE Branches though in:
koha-tmpl/intranet-tmpl/prog/en/modules/admin/smart-rules.tt
koha-tmpl/intranet-tmpl/prog/en/modules/serials/checkexpiration.tt
This patch removes them.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hard to miss that one:
Template process failed: plugin error - Bareword "C4::Branch::onlymine" not allowed while "strict subs" in use at Koha/Template/Plugin/Branches.pm line 59.
Compilation failed in require at /usr/lib/perl5/Template/Plugins.pm line 206.
Removed OnlyMine from Plugin/Branches. Replaced by a template var in
cleanborrowers; it was used only once.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Category module contained only 1 method to return the patron
categories available for the logged in user.
The new method Koha::Patron::Categories->search_limited does exactly the
same thing (see tests) and must be used in place of it.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to
other libraries.
- On the 'Item circulation alerts' admin page
(admin/item_circulation_alerts.pl), modify the settings for check-in
and checkout (NOTE: Should not we display all patron categories on
this page? If yes, it must be done in another bug report to ease
backporting it).
- Search for patrons in the admin (budget) and acquisition (order) module.
- On the patron home page (search form in the header)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces sql queries done in some pl script and in
C4::Reports::Guided.
Since we have now a Koha::Patron::Categories module, we should use it
where it is possible.
Test plan:
- Prerequisite: Be sure you have several patron categories created, with
different option enabled, and limit some to certain libraries.
- On the 'Circulation and fine rules' admin page (admin/smart-rules.pl),
all the patron categories should be displayed (even the ones limited to
another library), ordered by description. Try to add/update existing rules.
- On the overdue rules page (tools/overduerules.pl), all the patron
categories with overduenoticerequired set should be displayed.
Try to add/update existing rules.
- On the following reports:
reports/borrowers_stats.pl
reports/issues_avg_stats.pl
The patron categories should be displayed. Note that there is an
inconsistency with these 2 reports: the patron categories limited to
other libraries are displayed on them, when they are not on the other
reports. This should certainly be fixed (on another bug report).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add tests for CanItemBeReserved returns 'itemAlreadyOnHold' to t/db_dependent/Holds.t
* Don't let GetReserveId explode
* Use search instead of map
* Remove instances of resbarcode
* Fix badly formed li closing tag
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
01/01/01984 should not be considered as a valid date.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a date does not contain leading zeros for day and month, the date
will be refused.
parseDate function considers 1/1/1990 as a valid date, but our perl code
does not. We must refuse it.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Before this patch, the user was still allowed to enter a valid date.
Now, if the date is not valid, the input is emptied.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The date format is now displayed on the warning popup.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The "suspend until" inputs (hold list on circ/circulation.pl and
members/moremember.pl) were not set in the same way.
The minDate option should be set for both (bug 10703 removed it for
circ/circulation.pl).
This patch reintroduces the option and add the OnClose event on both.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to remove accessibility issues due to the readonly attributes
on date inputs, this patch will remove them and introduce a javascript
validation on them.
This patch is not perfect for some reason:
I didn't manage to force the user to select a valid date. One solution
would be to reopen the datepicker plugin until a valid date is inserted.
But it could be annoying for users (and for me: I did not manage to
implement this solution).
You will note that input is emptied if the date is not valid. This is a
quick and efficient solution to prevent submitting invalid date and make
Koha explodes. A proper solution would be to implement the check server
side send a friendly message to the user.
Test plan:
For all inputs, try an invalid and a valid date.
1/ Debar a patron
2/ On the checkout tables (circulation and moremember), add a renewal
due date (at the bottom of the tables)
3/ On the checkout page, specify a due date
4/ On the return page, specify a return date
5/ On the invoice page (acquisition module), enter a shipment and
billing date
6/ On the invoice search page (invoices.pl) use filters shipment and
billing dates
7/ On the offline circ page, specify a due date
8/ On the edit patron page (memberentry), add a debarment
9/ On the reserve page (reserve/request.pl), use the date inputs to
suspend until a defined date
10/ Edit patrons in a batch (tools/modborrowers.pl) and use the
registration and expiry date inputs
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When cataloguing, if you want to duplicate a subfield that is not
empty, the new subfield is created with a copy of data in it.
This is not the case when you duplicate an whole field. The new one is
created with subfields but without data in it.
Test plan:
Add or edit a bibliographic record
Fill a subfield
Duplicate the subfield
=> Without this patch the value of the input will be copied
=> With this patch the new input will be emptied
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you use the 006 builder to view the existing values in the 006
tag, Koha is not pulling these existing values into the builder
window. Instead, Koha appears to be using defaults.
To reproduce:
1. Open a record in the editor
2. Switch from BKS to another material type.
3. Change as many settings as possible.
4. Close plugin.
5. Reopen plugin - notice your selections are not shown.
Trivial patch, heavilly inspired by Bug 9093.
To test:
1. Apply patch
2. Ensure that issue described above is no longer reproductible
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
