The sequence of fields in the SQL statement didn't
match correctly.
Test plan:
- Run the web installer on an empty database
- Make sure no SQL errors are shown
- Check the systempreferences table in your database,
especially all UsageStats*
- Make sure the explanations are in explanation etc.
Alternatively:
- Save your database
- truncate systempreferences;
- Load the sql file sysprefs.sql
- Verfiy as above
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested creating new database, then loading kohastructure and sysprefs.sql
Without patch sysprefs fails to load, with patch loads Ok!
No koha-qa errors
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
REPLICATE:
1. Create a new Koha database to your SQL Server. Set proper user permissions.
2. Change database data source definitions in koha-config.xml.
3. Run the web-installer to install a new Koha with defaults.
4. Run "SELECT * FROM systempreferences;" in your SQL Server and observe only
3 systempreferences set.
+--------------------------+
(( 5. mainpage.pl crashes!! ))
+--------------------------+
AFTER THIS COMMIT:
0. Redo REPLICATE steps.
1. test phase 4 returns over 400 results.
2. test phase 5 doesn't crash.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch:
- reintroduces the ISSN column
- fix a wording (already there before the main patch)
- fix the tests if a serial was already in late
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small change: Removed 2 tabs in claims.tt and fixed order
of ISSN/Issue number column descriptions as they were switched.
Note: The <order> tags are currently not stripped out of the
notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes columns Holds, Items and "Hold ratio" to sort
numerically instead of lexicographically. Also changes default sorting
column from "Holds" to "Hold ratio" because this is a hold ratios
-report, not hold count report.
Also cleans up an excess aoColumn -definition, because aoColumns ==
aoColumnDefs without target operator. No point in defining columns
twice.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The OPAC's list of a logged-in user's tagged titles displays title and
author, which for some reason are combined in the script into one
variable. I can't see any reason to do it this way.
This patch modifies the script so that title and author are passed as
separate variables. In addition, subtitle is now passed as well.
To test you must log into the OPAC as a user who has tagged multiple
titles, at least one of which should have an author and at least one
with a subtitle. View the list of tagged titles and confirm that this
information is being displayed correctly.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the cn_sort sorting accurace described by Joy Nelson.
Testing:
I) Appy the bug 12424 patch
Before applying this patch:
0) Select 3 items.
1) Edit the items selected
2) Change "Full call number" option to 971/P23w/v.1-2/pt.8, 971.01/P23w/v.1-2/pt.6-7 and 971.01/P23w/v.1-2/pt.7
3) Save changes
4) Valide 971P23WV_12PT_8_000000000000000, 971_000000000000000_01P23WV_12PT_67 and 971_01P23WV_12PT_700000000000000 (table items - cn_sort column).
After applying this patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 971_000000000000000_P23W_V_12_PT_8, 971_010000000000000_P23W_V_12_PT_67, 971_010000000000000_P23W_V_12_PT_7 (table items - cn_sort column).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems that this column has never been used.
Test plan:
1/ Execute the updatedatabase entry.
2/ git grep cancelledby should not return occurrence in the code (except
in Koha/Schema/*
3/ prove t/db_dependent/Acquisition.t should return green.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any trace of this column being used.
Passes tests and QA script, updates all necessary files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tests need to learn about the new fields in the branches table.
To test:
prove t/db_dependent/Branch.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Rebased on top of Bug 3977
This patch updates the Spanish default frameworks for bibliographic records
and authorities using the files created from the po files on Pootle.
To test:
- Run the web installer, make sure all mandatory data is selected
- Verify there are no SQL errors
- Check cataloguing behaves normally
- Check adding authorities behaves normally
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Trusting Bernardo and Tomas as native speakers to get the Spanish right.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Looking with Katrin at the default configuration of Number::Format, she
has the p_cs_precedes value set to 0 (put the symbol at the end) and
p_sep_by_sep set to 1.
Now it is possible to sent these values to the format subroutine.
On this way, the tests can force them in order to pass on all configuration.
This default value for this variable certainly depends on the locales.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch use the new module into pl and tt script.
Note that we could use it in the acqui/pdfformat/layout*.pm files.
Test plan:
1/ Verify that the acquisition home page displayes the prices as before.
2/ Verify that the budgets page displayes the prices as before.
3/ Verify that the funds page displayes the prices as before.
4/ Verify that the planning page displayes the prices as before. (Note
that 1 price is now formatted: 'Fund remaining').
5/ Create an order from a staged file. This stage file should contain a
formatted price.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This subroutine is now useless.
Test plan:
git grep FormatNumber
should not return any result in pl and pm files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a new module to manage prices into Koha and
especially the acquisition module.
How to use is:
1/ You can use it in a perl script/module:
my $price = Koha::Number::Price->new(3);
$price->format; # Will display 3.00 (or 3,00 depending on the CurrencyFormat syspref).
$price->format({with_symbol => 1}); # Will display €3.00 (or [$]3,00 depending on the CurrencyFormat syspref).
2/ But this module is usefull to display the price from a template file.
[% my_price | Price %]
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The application of the "noEnterSubmit" class to textareas in the
cataloging editor prevents the user from being able to use the Enter key
to create line breaks. This is not intentional and should be corrected.
This patch adds more specific scoping to the relevant JavaScript.
To test, apply the patch and clear your browser cache if necessary. Open
up the MARC editor and locate a tag which uses a textarea for entry. Try
typing lines of text separated by line breaks. The enter key should work
correctly.
Signed-off-by: bondiurbano costalc@gmail.com
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and fixes the problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup
- changes some indexes in Queryparser configuration file
- supresses some clearly useless 6XX$9 in biblio-koha-indexdefs.xml and adds 2 new ones, probably useless (not sure of that)
- change the name of index Subject-geographical to Subject-name-geographical in ccl.properties (to match bib1.att)
the xsl file zebradb/marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl was generated with the following command:
xsltproc zebradb/xsl/koha-indexdefs-to-zebra.xsl zebradb/marc_defs/unimarc/biblios/biblio-koha-indexdefs.xml > zebradb/marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl
To test :
1) Apply the 3 patches
2) copy the modified files from the source directory to the directory where you store the config files for Zebra and Queryparser
The files modified by the 3 patches and that need to be copied are:
etc/zebradb/biblios/etc/bib1.att
etc/zebradb/ccl.properties
etc/searchengine/queryparser.yaml
etc/zebradb/ccl.properties
.../unimarc/biblios/biblio-koha-indexdefs.xml
.../unimarc/biblios/biblio-zebra-indexdefs.xsl
3) Rebuild Zebra
4) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
WITHOUT QP activated in sysprefs ("Don't try to use QP"):
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
WITH QP activated in sysprefs:
Same tests
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Only cosmetic :
- the references to lines record.abs are now useless and outdated
- some comments added in record.abs could be usefull in biblio-koha-indexdefs.xml
No change expected, only comments
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[New commit on 18 Aug 2014 : rebased, and DOM indexing only]
Issues to fix :
Most of 6XX may contain a $2 that identifies the system used for indexing. It should not be indexed.
In French libraries, $2 contains "rameau". So searching books about the music composer "Rameau" retreive thousands of records!
For some 6XX fiels, other subfields should not be indexed, for example dates of persons and family, or adresses.
In Unimarc guide, 600$t,601$t,602$t are said to exist but to be "not used". I keep them indexed.
Additionnally, subject indexing could be improved by using specific indexes for each 6XX if possible :
In ccl.properties :
- su-to, su-geo and su-ut are defined as aliases of Subject.
- a specific index is defined, but not used in record.abs : Subject-name-personal, alias su-na
We can use these indexes and create new specific indexes by using existing bib1 attributes.
We could also index $j,$x,$y,$z subdivision in specific indexes.
This patch does the following changes :
1) For all 6XX : Not indexing $2 (LSCH, Rameau...), $3 and $5
2) Suppressing the indexing of some specific subfields, depending on the field:
600 : Personal name used as a subject // see Marc21 600
not indexing c (additional elements),f (dates),p (address/affiliation)
602 : Family name used as a subject // see Marc21 600 3X
not indexing f (dates)
616 : Trademark
not indexing c,f
3) For all 6XX : index $j,$x,$y,$z in several indexes in addition to the specfific index for their 6XX field:
4) Define in ccl.properties some specific indexes :
Subject-name-conference 1=1073 => alias su-conf
Subject-name-corporate 1=1074 => alias su-corp
Subject-genre-form 1=1075 => alias su-genre and su-form
Subject-geographical 1=1076 => alias su-geo
Subject-chronological 1=1077 => alias su-chrono
Subject-title 1=1078 => alias su-ut and su-ti
Subject-topical 1=1079 => alias su-to
5) Adding new aliases in Search.pm :
su-chrono, su-form, su-genre, su-corp, su-conf, su-ti
6) Using these new indexes in for
600 : Subject and Subject-Personal-Name ; all subfields except subdivisions in Personal-name
601 : Subject, Subject-name-conference and Subject-name-corporate and Subject-name-conf ; all subfields except subdivisions in Corporate-name and Conference-name
602 : same as 600 but could be improved later
604 : Subject and Subject-title ; $a in Subject-Personal-Name ; all subfields except subdivisions in Name-and-Title
605 : Subject and Subject-title
606 : Subject and Subject-topical
607 : Subject and Subject-geographical ; all subfields except subdivisions in Name-geographic
608 : Subject and Subject-genre-form
To test :
A. In a UNIMARC-DOM indexing environment
1) Apply the patch
2) Rebuild zebra
3) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
Indexing of subjects could maybe be improved later
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
All seems to work as expected, I am not super-familiar with UNIMARC but I wonder if in su-corp and su-conf the subdivisions might be useful (e.g. France-Gendarmie / Staatsbibliothek-Berlin)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fixing descriptions in all frameworks for consistency.
Changed frameworks are:
- es-ES, default framework
- fr-FR, default and simple frameworks
- nb-NO, default and simple frameworks
- pl-PL, default and simple frameworks
To test:
- verify changes by reading them
- or verify by running the web installers of those languages
and checking the description appears correctly
- or verify by loading the sql files manually and check
they still load correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the treeview plugin in the staff client from the
language-specific lib/jquery/plugins directory to the one outside the
theme directory.
To test, apply the patch and view the "Set permissions" page for a
patron. The list of permissions should display in an expandable list as
usual.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works, following the test plan. I can see the jQuery treeview plugin moved
from 'prog' language specific directory to the global lib/plugins directory.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Found no other places where we use this plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes _get_facet_from_result_set rely on a new syspref (FacetsMaxCount)
to set the max facets to show for each facet category. It defaults to 20 if
the syspref is absent or empty.
To test:
- Have a search with lots of facet results (with some category showing the "See more" link).
- Jump to "See more", notice it shows more than 20 facet values.
- Apply the patch, reload the page.
=> SUCCESS It only shows 20 (default hardcoded value)
- Change the FacetsMaxCount syspref to other value (e.g. 15 or 100).
- Reload
=> SUCCESS: it shows the expected amount.
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan completed successfully
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch introduces a syspref (FacetMaxCount) that controls how many
facets to show for each category (e.g. Author).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch converts an id to a class in order to avoid duplicate id
attributes on one page.
To test you must have XSLT enabled with the default setting. Perform a
search in the OPAC and confirm that the display of location looks
correct.
Run the resulting page through a validator using an in-browser tool like
Firefox's Html Validator addon or using the W3C's validator.w3.org. The
results should not complain of duplicate id attributes.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
OK for me. Obvious mistake: I can confirm FF HTML validator reports it, and
stop reporting it after applying this patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I can confirm this fix is correct.
Also, I found that jQuery doesn't like repeated ids in some cases
so this will make customizing easier.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be nice if there were a simple way to access the name and
branchcode of the currently logged in library, as well as the logged in
user via JavaScript ( via intranetuserjs ).
I propose the following:
1) Remove the whitespace surrounding the loggedinusername span
2) Wrap the logged in branch name with a span that has an id
3) Add the branchcode in a hidden span that has an id
Test Plan:
1) Apply this patch
2) Log into Koha
3) Inspect the html source code
4) Note the lack of whitespace within the tag <span class="loggedinusername">[% loggedinusername %]</span>
5) Note the logged in branch name is now surrounded by a span with an id
6) Note below that is a span containing the branchcode, also with an id.
7) Verify the branchcode span is hidden by default.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Small template change, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the text for zebra_auth_index_mode and zebra_bib_index_mode
entries missing on koha-conf.xml telling the user GRS-1 is deprecated.
It also adds another check for those preferences set to GRS-1, and shows a
warning message if set to grs1.
To test:
- Apply the patch and try all combinations:
- zebra_auth_index_mode and zebra_bib_index_mode missing
- zebra_auth_index_mode and zebra_bib_index_mode set to grs1
- Sign off :-D
Regards
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I've played with the 3 related koha-conf.xml file parameters:
zebra_auth_index_moda, zebra_bib_index_mode missing, and use_zebra_facets.
Inconsitencies are properly reported in About page thanks to this patch. It
would be helpfull to admin upgrading their Koha installation.
And by the way, thanks Tomas for the new Zebra facets functionnality. It's a
'joy' to see it into Koha.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The /svc endpoint allows you to create and update biblio records.
This patch extends it so that it is also possible to delete a biblio.
Test plan
* Create a new biblio by sending a POST request to /svc/new_bib with a
marcxml record as request body. Note the biblionumber it gets assigned.
* Make some changes to the marcxml record, and update it by sending
a POST request to /svc/bib/{bibilonumber}
* Observe that the changes are persisted on the biblio record.
* Now delete the bilblio by sending a DELETE request to
/svc/bib/{biblionumber}
* Observe that the biblio is indeed gone from the db.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described and passes tests and QA script.
I tested using curl for a record with and one without items:
curl -X DELETE 'http://localhost:8080/cgi-bin/koha/svc/bib/2' --cookie /tmp/svc.cookies
<?xml version='1.0' standalone='yes'?>
<response>
<error>This Biblio has items attached, please delete them first before deleting this biblio </error>
</response>
curl -X DELETE 'http://localhost:8080/cgi-bin/koha/svc/bib/3' --cookie /tmp/svc.cookies
<?xml version='1.0' standalone='yes'?>
<response>
<status>OK, biblio deleted</status>
</response>
The deletion is processed correctly and the indexes are updated.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10550 as renamed items.wthdrawn into items.withdrawn.
This change was missing in ILSDI/Services.pm
Test plan :
Test ILSDI webservice GetAvailability on a item with items.withdrawn > 0.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes what seems to be the last occurence of wthdrawn.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, tested in UNIMARC and MARC21.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes two jQuery plugins which were used only by
Solr-related templates. With the removal of Solr these plugins are
obsolete.
To test, search the Koha code for references to the two plugins:
jquery.textarea-expander.js
tablednd.js
There should be none.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Couldn't find any references. Also passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note: mail from this doesnt work in current master, so you may not
be able to test this fully
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test sending a mail from scheduled reports, note you will need to have the fix
for 12031 applied
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a list from the staff client
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a list from the public (OPAC) interface
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Send a cart from the public site (OPAC)
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, test sending a cart email from the staff client
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So notices using it (circulation, holds etc) will now use the new behaviour
To test:
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, a circulation alert, an acquisitions claim, or a newly created borrower alert
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ run t/Koha_Email.t
No changes to behaviour have been implemented yet
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
