When canceling holds waiting over X days in "Holds awaiting pickup"
view, form submission resets the selected tab to "Holds waiting". This
tab reset may cause confusion for the user and lead to unwanted
actions. Instead, the user should be returned to the same tab that they
began with.
To test:
1. Apply patch
2. Navigate to /cgi-bin/koha/circ/waitingreserves.pl
3. Select "Holds waiting over X days" tab
4. Refresh page
5. Observe "Holds waiting over X days" is still selected
6. Have some holds waiting over X days
7. Select one of them and press "Cancel selected (1)" and confirm
8. Observe "Holds waiting over X days" is still selected after form
submission
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 30235d3188)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c12d037da2)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Apply patch
2. Do a search and select some records
3. On the toolbar (#selection_ops) open the Edit dropdown.
4. The labels should read 'Batch edit records' and 'Batch delete records'.
Note: To see both you must have batchmod and batchdelete permission.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 7ce420ed82)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Apply patch
2 - Repeat test on previous patch
3 - You should get a warning popup when attempting to save hold
4 - Reload page
5 - Inspect the HTML and manualy set #pickup value of selected option to ""
6 - Attempt to save hold
7 - You get the popup
8 - Place a hold normally (with location) and verify it works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e609e20c04)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
DataTables is not raising error to the end user, it's only displaying a generic message in the console.
This leads to lot of questions on IRC or the mailing list ("the table is empty").
We can do better and display what went wrong.
We could also imagine add a link to the wiki for the more common problems (won't be implemented here however).
Test plan:
Revert "Bug 31104: Put each link on a separate header" and search for a
patron using a very long string
You should get an alert with the reponse of the server.
In my case:
"""
Something went wrong when loading the table.
414: Request-URI Too Long
"""
You can also make the REST API returns a 500 (bad specs or simply with a
die statement).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 76b984bb6c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1 - Browse to 'Administration->Circulation and fines rules'
2 - Make sure you are editing 'Standard rules for all libraries'
3 - Set 'Lost item fee refund on return policy' to 'Refund lost item charge and charge new overdue fine'
4 - Swtich to edit rules for a specific library, click on the dropdown for 'Lost item fee refund on return policy' and note default says 'Use default (Refund lost item charge and restore overdue fine)'
5 - Switch default/all libraries rule to 'Refund lost item charge and restore overdue fine'
6 - On specific branch note the default option is now 'Use default (Refund lost item charge and charge new overdue fine)'
7 - Apply patch and repeat, note the default descriptions now display correctly
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 417d8df61b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0df59817bf)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
There is a flaw when subfields are ordered, the inputs are not retrieved
correctly.
We should not rely on the order but use an id instead.
Test plan:
Create, edit subfields
Modify values from the different subfields
Confirm that values are correctly saved
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 16a919d919)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
CheckMandatorySubfields use the class "input_marceditor" but in file
serials-edit.tt this class is not set for select input in Supplemental
issue form. In consequence if a select field is set as mandatory, it is
detected as missing even if it is filed and so you can't submit the form
and receive the new supplemantal issue.
Test plan:
1- Create (or find) a subscription for a biblio record and select the
option "Create an item record when receiving this serial"
2- Be sure to have at least one mandatory subfield that is filed with a
select input in the framework used by the biblio record. (ex: 952$a,
952$b or 952$c).
3- From the subscription-detail page click on "Receive"
4- In the lower part--Supplemental issue--fill the suppelemant details,
change the status to "Arrived" and fill the item form that appears.
5- Click on "Save"
6- Check that an error box appear with the message " Form not submitted
because of the following problem(s) 1 mandatory fields empty
(highlighted)" (the number can be different according to the number of
concerned subfields)
7- Apply the patch
8- Repeat step 3 to 5
9- Check that no error appear and that your item has been created
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4f6164d194)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. Make sure you have mandatory item subfields in the MARC bibliographic
framework used in acquisitions ("ACQ" if it exists, the default framework
otherwise).
2. Use the "Stage MARC records for import" tool to upload a file. Do not import
the bibliographic records.
3. Create a new acquisition basket ("Create items when:" must be set to
"placing an order") and add a new order from a staged file
4. Select the file you just uploaded
5. In the "Items information" tab, make sure at least one mandatory subfield is
empty
6. Try to submit the form. If there are errors about other mandatory fields
(like the fund for instance), fix those errors and resubmit. There should be
an error message about mandatory item subfields.
7. Enter a value for the mandatory item subfields and resubmit the form. Verify
that the order and the item have been correctly created.
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e37359cae9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch switches to Bootstrap tabs anywhere in the OPAC where
jQueryUI tabs were used.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test the item type/collection/shelvinglocation tabs on the advanced
search page. Test that it works correctly with different variations of
the OpacAdvancedSearchTypes system preference.
- Search for an authority record and view the details. The "Notes"
tab should be styled correctly.
- Locate a bibliographic record and view the detail page. Verify
that tabs are working, including all the options:
- Holdings
- Other holdings ( If OpacSeparateHoldings is enabled)
- Descriptions ( MARC notes )
- Subscriptions
- Serial collection (UNIMARC, untested)
- Components ( If ShowComponentRecords is enabled. Link to sample
record:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023 )
- Comments
- Editions (OPACFRBRizeEditions)
- Html5media ( If HTML5MediaEnabled is on. Link to sample records:
(https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=10685)
- Images ( If OPACLocalCoverImages is enabled )
Bonus points for testing these tabs for which I don't have
credentials:
- Syndetics TOC
- Syndetics Excerpt
- Syndetics Reviews
- Syndetics AuthorNotes
- LibraryThing for Libraries (with LibraryThingForLibrariesTabbedView
set to "in tabs."
- NovelistSelect
- Check tabs on these patron-related pages:
- Checkout history
- Search history
- Patron summary. The following tabs are
✓ Checkouts
✓ Relatives' checkouts
✓ Overdues
✓ Fines
✓ Relatives' fines
✓ Holds
✓ Recalls
✓ Article requests
✓ Overdrive
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30570: (follow-up) Correct rebase errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 894f7013eb)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
As the issue might not have been published yet, but should have
been that seemed a better fit.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 44d0f585d1)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1. Have a vendor setup
2. Go to serials and add a new serial w/ that vendor.
3. When creating a serial make this first issues sometime in the past.
4. Go to Claims, choose your vendor and load the table.
5. No published on column.
6. Apply patch
7. Try step 4 again and now you should see a published on column.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d8b63b05e9)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0d19d7bcc5)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Prevent a blink
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 97e8a5b00d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch modifies the form for adding a new subscription so that the
collection and item type fields are shown only when the subscription is
configured to create an item when receiving.
To test, apply the patch and go to Serials -> New subscription.
- When the page first loads, the "Do not create an item record when
receiving this serial" radio button should be selected.
- Under the "Location" field there should be no item type or collection
field.
- Select the "Create an item when receiving this serial" radio button.
- The item type and collection fields should appear.
- Test that the values are correctly saved when you add or edit a
subscription.
- If you edit a subscription which had item type and collection defined,
and you switch to "Do not create an item..." the record should save with
empty values for those fields.
- Confirm that existing subscriptions open with the correct settings
applied: Only records with "Create an item..." checked should open
with the item type and collection fields displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 13525cff5c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 28373 added system preference PassItemMarcToXSLT is referenced is all XSLT system preferences.
But it only applies on results pages.
The only use in perl code is in C4::Search :
> $marcrecord->delete_fields( @fields ) unless C4::Context->preference('PassItemMarcToXSLT');
I've tested by adding in all XSLT files :
<strong>ITEMS <xsl:value-of select="count(marc:datafield[@tag=952])"/> </strong>
Number of items only appears in OPAC and staff interface results pages.
In fact only search pages get MARC record from search engine, in which items datas have been embedded for indexing.
In other pages MARC record does not embed items datas.
This patch adds "MARC21 952, UNIMARC 995" to be explicit we talk about
MARC datas not item tags build in XML recieved by XSLT.
Test plan :
1) Apply patch
2) Search for PassItemMarcToXSLT in system preferencies
3) Look at description of PassItemMarcToXSLT
4) Check PassItemMarcToXSLT only apprears in OPACXSLTResultsDisplay and XSLTResultsDisplay
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f6dbad91c4)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This enhancement shows recalls ready for pick-up on the patron's account
so they can't be missed.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item. Note the pickup library.
5) Go back to the staff client. At the top right of the page, confirm
your logged in library matches the recall pickup library. Set the
library to the recall pickup library if needed.
6) Check in the recalled item and confirm the recall as waiting for
Patron A.
7) Go to Patron A's account (members/moremember.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
8) Go to Patron A's checkouts (circ/circulation.pl). Confirm the recall
shows under 'Recalls waiting here' and all the information is correct.
9) Click on the menu at the top right of the page and choose 'Set
library'. Change the library to some other library.
10) Repeat steps 7 and 8, however this time the recall should show under
'Recalls waiting at other libraries'.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 952f00f20b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
The cashup history table was sorting from oldest to newest.. it's
perferable to show the most recent at the top by default.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit dbbaba3ee0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
On "About Koha" page are displayed the numbers of indexed biblios and authorities with ES.
It could be great if we could have comparison with the number of records in the database to display the number of missing records.
In the "System information" tab with the other "Data problems".
If Searchengine has any issue (index count will be -1), we do not
display missing records.
Test plan :
1) Use Elasticsearch searchengine
2) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
3) Go to "About Koha" page and look at System information tab
=> you see no warning
4) On a biblio record delete the MARCXML in biblio_metadata.metadata
5) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
6) Go to "About Koha" page and look at System information tab
=> you see warning : 1 record(s) missing on a total of 435 in indice koha_kohadev_biblios.
7) On a authority record delete the MARCXML in auth_header.marcxml
8) Rebuild all records : koha-elasticsearch --rebuild -d kohadev
9) Go to "About Koha" page and look at System information tab
=> you see warning : 1 record(s) missing on a total of 1705 in indice koha_kohadev_authorities.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fee0f29792)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
After placing an order in a basket with a discount of "0" if you attempt to modify we will load the vendor default discount, this can lead to accidentally applying a discount when modifying other order parts
To test:
0 - Have a vendor with a discount set
1 - Add an order to a basket
2 - While adding, set discount to 0
3 - Add order - prices are calculated ocrrectly
4 - Modify order
5 - Note discount is populated with vendor discount
6 - Cancel
7 - Apply patch
8 - Modify order
9 - Discount remains at 0
10 - Repeat with a vendor with no discount set
11 - Placing order not specifiying discount it remains blank
12 - Modifying order discount remains blank
13 - Modify order and set discount
14 - Confirm it is retained on modifcation
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 73d2066837)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch adds context to the term Print in the context of message transport types (as opposed to printing something/print button), for translation purposes.
To test:
0- Apply patch
Check the terms to be changed
1- Go to Tools > Notifications & slips
2- Edit a notification
** 3- In the tabs for different transport types, check the 'Print' term (letter.tt)
4- Go to Tools > Overdue notice/status triggers
** 5- In the transport types, check the 'Print' column heading (overduerules.tt)
Add a new language (fr-CA in the example, change for whatever language code you want)
6- In a terminal, run
gulp po:create --lang fr-CA
7- Then, run
gulp po:update --lang fr-CA
8- In system preferences, enable the new language in language and OpacLanguages
9- Switch the language in staff interface and OPAC
Change the translations
10- In your favourite text editor, open fr-CA-messages.po
11- Find the string msgctxt "Message transport type"
12- Enter a word in msgstr
13- Save the file
14- In a terminal, go to misc/translator
15- Run
./translate install fr-CA
Check the translations
16- Redo the steps to check the terms (steps 1-5) and make sure the terms in steps 3 and 5 are changed for the word you put in step 12.
17- Optionally, check the other pages where the term is supposed to be unchanged and make sure it is unchanged
Check the terms to leave unchanged (optional)
18- Enable the HoldsAutoFill and UseCashRegisters system preferences
19- Go to Administration > Cash registers and create a cash register
20- Go to a patron's account
** 21- Check the 'Print' button in the menu bar or the patron's account (members-toolbar.inc)
22- Go to the 'Accounting' tab
23- Create a manual invoice
** 24- In the 'Transactions' tab, check the 'Print' button in the fee line (boraccount.tt)
25- Pay the fee (make sure to use the cash register)
** 26- In the 'Transactions' tab, check the 'Print' button in the payment line (boraccount.tt)
27- At the top of the transactions table, click the 'Export' option
** 28- Check the 'Print' option (columns_settings.inc)
29- Go to the 'Check out' tab and check out an item
30- Go to the item's bibliographic record
** 31- Check the 'Print' button in the menu bar of the detailed record (cat-toolbar.inc)
32- Add the record to the cart and open the cart
** 33- Check the 'Print' button in the cart (basket.tt)
34- Place a hold on the item
35- In the search bar at the top, click the 'Check in' tab and check in the item
** 36- Check the 'Print' button in the 'Hold filled for' message (returns.tt)
37- Go to Tools > Cash summary for Branch
38- Click 'record cashup' and confirm
39- Click the 'Summary' link in the 'Last cashup' column
** 40- Check the 'Print' button in the cashup summary modal (cashup_summary.inc)
41- Go to Serials
42- Create a subscription (if there aren't any)
43- Receive an issue
44- From the subscription detail page, go to Create routing list
45- Add a recipient to the list
46- Save the routing list
47- Click 'Save and preview routing slip'
** 48- Check the 'Print' button in the routing list preview (routing_preview_slip.tt)
Note: I can't find where the 'Print' from tinymce_i18n.inc is displayed in the staff interface
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 920529df42)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
When defining our sort fields in we defined all as 'numeric'
For other string containing numbers this is likely correct, however,
for callnumbers it is not. e.g. E45 should sort before E7
This patch adds a new 'callnumber' type and deifnes this for cn-sort and
adds to the field maping a sort without numeric set
To test:
0 - Be using ES with Koha
1 - On records with single item, add callnumbers:
VA65 E7 R63 1984
VA65 E7 T35 1990
VA65 E45 R67 1985
2 - Add public note 'shrimp' or something to make them easily searchable as a group
3 - Search for 'shrimp', sort by callnumber
4 - Note E45 comes last, it should come first
5 - Apply patch
6 - Reset ES mappings
7 - Reindex ES
8 - Repeat search
9 - Sorting should be correct when set to callnumber
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michal Urban <michalurban177@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b8b8a62f11)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Turn on recalls
1.1) In Administration > Global system preferences, enable UseRecalls
1.2) Add recalls permissions in your circulation rules
2) In the OPAC, log in as a patron
3) Find a record with checked out items and place a recall
4) In the staff interface, go to the patron's account
5) Click on any tab on the left in the patron's account (e.g. Holds history)
--> Note that the Koha logo and search bar is at the top of the page between the module menu and the breadcrumbs
6) Click on the 'Recalls history' tab
--> Note that the Koha logo and search bar disappear
7) Apply patch
8) Conform search bar is there
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6dc978375e)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
As suggested by Katrin, adding a warning to the system preference that
this has an effect on SIP configurations that needs to be understood.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f154fb0372)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
SIP00 is the code for CASH transactions that have taken place on a SIP
client. Cash management treats CASH type transactions as a special case
for banking and register requirements. This patch brings SIP00 in line
with the CASH handling code of cash management.
Test plan
1) Enable cash management with 'EnablePointOfSale'
2) Enable cash registers with 'UseCashRegisters'
3) Add a cash register via 'Administration > Cash registers'
4) Make some payments against the ash register in the staff client
5) Attempt to make a payment via a SIP client without having associated
a cash register to the SIP account config
5a) This should now fail
6) Attach the cash register to the SIP account used above
6a) Payment should now work again on SIP transactions
7) Look at the cash register details page for the cash register
7a) 'Bankale' should now include cash from both SIP and Staff client
sales
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 9d8be887d0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the use of templates and CGI in ExplodedTerms by using the
Koha::I18N library.
The functionality on the package is too simple, and messing with the
template paths complexity on the tests was too much, given we have a
nice way to have translatable strings at the package level.
This patch does that, and cleans up the test file as well, that required
complex template and CGI mocking to run properly.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
=> FAIL: It fails in master
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Follow the original test plan
=> SUCCESS: Things work
5. Enjoy the rest of the day and forget this ever happened
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ecd91d6089)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
== test plan ==
1. Enable "Did you mean?":
. go to Administration > Additional parameters > Did you mean?
. put a tick in each plugin and save the configuration
2. In the OPAC, search for 'open source'
3. Without the patch you see escaped <span> after "Did you mean:"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 1672d0c1c0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
To test:
1) Install another language and enable it in the OPACLanguages system preference
2) Also make sure opaclanguagesdisplay is set to Allow
3) Make sure OpacLangSelectorMode is set to display the switch in the footer (either top and bottom or footer only)
4) Turn on recalls
4.1) In Administration > Global system preferences, enable UseRecalls
4.2) Add recalls permissions in your circulation rules
5) In the OPAC, log in as a patron
6) Find a record with checked out items and place a recall
7) Go to your account
--> Note that the language switch is at the bottom left of the screen
8) Click on any tab in the patron's account
--> Note that the language switch is at the bottom left of the screen
9) Click on 'Your recalls history'
--> Note that the language switch is right under the recalls history table
10) Apply patch
11) The changelanguage div should now be properly placed at the bottom of the page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 098866cab0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch was split from bug 23681 where QA identified the issue.
This patch fixes the debarment count displayed on the circulation page
tabs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b6afcdbf48)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
In the only place we use the waiting_holds include, we were hard coded
to always pass the 'select_column' variable as true.
We can simply and clarify the logic by just removing this superflous
variable.
Test plan
1. Confirm that the waiting holds tables continue to display as expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit f58099a244)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
cashup_modal.js consists only of jQuery code, so the whole thing should
be contained in a $(document).ready() function. This may or may not be
contributing to the behavior this bug is trying to fix.
Please note that this patch contains whitespace changes, so diff
accordingly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 743731949d)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the erroneos duplication of the modal printing js.
Test plan
1) Create some transactions and perform a cashup.
2) Open the cashup summary modal
3) Click 'Print'
4) Cancel the print dialogue
5) Note that the dialogue re-appears
6) Apply the patch
7) Repeat and note the dialogue closes first time now.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5e6f88e62f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch updates the javascript for the checkouts table to add the
checkbox back in for the case where too_unseen is the error returned by
CanBookBeRenewed, allowing such issues to be renewed.
Signed-off-by: Caroline <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 91a67e3c8a)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch fixes a malformed link to print selected labels
and fix error:
Can't locate object method "get_attr" via package "-2" (perhaps you forgot to load "-2"?) at /usr/share/koha/intranet/cgi-bin/labels/label-create-pdf.pl line 126.
To test:
1 - Create a new label batch with some items
2 - Select 1 or more
3 - Export selected labels
4 - Download as PDF
5 - It works!
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 470fb6b6d8)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch corrects a regression caused by Bug 28321, which
inadvertently removed the date due from output of item information in
each search result.
To test, apply the patch and perform a catalog search which will return
some results which are checked out and some which aren't. Confirm that
the checked out items show the date due correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 25d31a7581)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This patch removes the colspan from biblio-level course reserves rows in
favor of adding a style to the message's container allowing it to
overflow across table cells.
To test, apply the patch and go to course reserves.
1. If necessary, add a new course.
2. View the details of the course and add a reserve using the
biblionumber option to add the reserve at the bibliographic level.
3. Add a notes if you want, then click "Save."
4. Return to the course detail view.
5. In the table of reserves your biblio-level reserve should have a
message starting in the "Barcode" column and overflowing across other
item information columns, "Item information is not available for
record-level course reserve."
6. Try adding multiple item-level and biblio-level reserves to the same
course to confirm that the information displays well in those cases.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 91f50ee70f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
This commit adds a different message when cloning circulation and fine rules if you use the Standard rules for all libraries option.
Test plan :
1. Go to the Circulation and fine rules page in the Admin tab.
2. Check that the 'Select a library' menu is on 'Standard rules for all libraries'.
3. Check that you also have some random rules to clone, or create some.
4. Clone these rules to the library of your choice.
5. Confirm that the message 'Clone circulation and fine rules from "" to (library of your choice)' appears.
6. Now clone rules from a specific library to another one, and repeat steps 3-4.
7. Confirm that this time, the message will displays both libraries properly.
8. Apply patch.
9. Repeat steps 2 to 4 and 6 to 7. Confirm that this time, the message in the first case will be 'Cloning circulation and fine rules to "(library of your choice)"'.
10. Kindly sign off.
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit c483afa2d0)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test:
1. Login to the staff interface
2. First you need to create an overdue item.
a. Find the barcode for an item
b. Goto My checkouts from the drop down by your login
c. Enter the barcode and use checkout settings to select a date in the
past.
2. Go to Tools
3. Go to Circulation
4. Go to Go to Overdues
5. In the table the due date is in black
6. Apply the patch
7. Refresh the page and the due date should be in red.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 21cf6228be)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Please test and confirm terminology is now correct.
Was unable to test without steps to reproduce.
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cb35d1e92c)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
TEST PLAN:
1. Trigger the Cannot cancel receipt error in invoices OR look at the
amended string to see the additional space has been removed.
Sponsored by Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2702fc533f)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan
Login to staff interface
Go to Administration. Search EnableExpiredPasswordReset. Enable this preference. Save.
Find your patron record and go to details.
In the ‘OPAC/Staff interface login’ section, set the Password expiration date to the previous day. Save.
Open the OPAC in a new window.
Login to your account. It will fail. Click Reset your password.
Follow the process to add a new password. Click update password.
See that it says ‘Go to staff interface’
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8a5ec1145b)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Test plan:
1. Login to the staff interface
2. go to tools
3. go to label creator
4. Click New -> Layout
5. Click the 'Choose layout type' dropdown
6. Notice the 'barcode proceeds biblio data' and 'biblio data proceeds
barcode'. These are typos
7. Apply the patch and refresh the page
8 repeat step 5. Confirm 'proceeds' now correctly says 'precedes'
Sponsored by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8855da2265)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Add additional clarifcation, format NOTE: similar to most other
notes in system preferences (bold, start on a new line), and link
to other system preferences mentioned.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 5a9d7be424)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
TEST PLAN:
1. On the Admin page, navigate to Koha Administration > Global System
Preferences
2. Search for OPACMandatoryHoldDates
3. In the Value field, check that it now says On the "Placing a hold"
form, instead of opac-reserve form.
Sponsored by Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ff4f9a9e74)
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
