This patch adds a note column to the circ and fine rules to act as a
description line for the rule.
To test:
1) Apply patch, update database (may have to also update schema)
2) Go to Admin -> Circ and fine rules
3) Scroll to the right, notice new Note column
4) Confirm it works to create a brand new rule with a Note
5) Confirm it works to modify an existing rule with a Note
Sponsored-by: Catalyst IT
Lee Jamison <ldjamison@marywood.edu> rescued this patch.
It is a clean re-build of attachments 61865 and 63902
to fix the merge conflict introduced during application of both
attachments.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: macon lauren KohaCon17 <caballeromaricon@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Weight can be defined between 1 and 99.
only search fields mapped with biblios can be weighted
Test plan:
- apply this patch,
- update schema file (perl misc/devel/update_dbix_class_files.pl),
- go to Administration > Search engine configuration,
- in search fields tab, define weights for some fields and save,
- check weights has been saved,
- reset some weights (empty) and save,
- check weights has been reset
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Rebased-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
So far the administration module only allowed for 2 permissions:
- circulation conditions (manage_circ_rules)
- everything else (parameters_remaining_permissions)
With this patch almost every section of the administration page
will have its own granular permission.
To test:
- Create different staff users:
1) One with parameters_remaining_permissions
2) One with parameters
3) One with catalogue and no parameters
4) One superlibrarian
- Apply the patch
- Run the database update
- Check the staff users:
1) All subpermissions, but manage_circ_rules
should be checked
2) Nothing should have changed
3) manage_item_serach_fields shoudl be checked
(page had catalogue permission before)
4) Nothing should have changed
- Try different settings of the permissions and
verify that
- Administration page behaves correctly
- Administration menu behaves correctly
! You shoudl only see what you have permission for
https://bugs.koha-community.org/show_bug.cgi?id=14391
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a consistency issue: we store '@' as the subfield for
fixed-lenght fields, yet on editing '_' is displayed (on the form and
the tab). This was probably done to avoid URI encoding problems in the
past.
This patch restores the '@' everywhere.
To test:
- Open the MARC structure for any bibliographic MARC framework
- Choose Actions > Subfields on any fixed-length field
=> ERROR: Notice the tab has an underscore (_) and the subfield code is '_' as well.
- Cancel
=> SUCCESS: '@' is displayed on the list
- Apply this patch
- Restart all the things:
$ restart_all
- Choose Actions > Subfields on any fixed-length field
=> SUCCESS: '@' is displayed in the tab title, and on the 'Subfield
code' form field.
- Save some changes
=> SUCCESS: Things work correctly.
- Sign off :-D
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the 'frameworkcode' template parameter. Now the
'framework' object is passed, and everytime the frameworkcode is needed
on the template, framework.frameworkcode is called.
To test:
- Apply this patch
- Run:
$ grep ' frameworkcode ' koha-tmpl/intranet-tmpl/prog/en/modules/admin/marctagstructure.tt
=> SUCCESS: There's no use of 'frameworkcode' in the template
- Sign off :-D
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes URL building from the controller
(admin/marctagstructure.pl) and does it on the templates, using the
right 'uri' filter for the query parameters.
It also removes:
- No longer used attributes that are passed to the template
- Duplicated code in the templates
To test:
- Go to Home > Administration > MARC bibliographic framework
- On any of the listed frameworks, pick the 'MARC structure' action in
the dropdown
- On any subfield, hover on the actions dropdown
=> FAIL: The URLs are wrongly formed
- Click on the links
=> FAIL: You get errors because of the bad URL
- Apply this patch
- Reload the 'MARC structure' page
- On any subfield, hover on the actions dropdown
=> SUCCESS: LInks look correct
- Click on any of them
=> SUCCESS: They work!
- Use the 'Display only used tags/subfields' checkbox
=> SUCCESS: No behaviour change!
- Sign off :-D
Sponsored-by: Theke Solutions
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a DataTables toolbar to the Notices & slips table,
including a filter field, column visibility, and data export options.
To test, apply the patch and clear your browser cache if necessary.
- Go to Tools -> Notices & slips
- Confirm that there is a table toolbar with a filter, a "Column
visibility" button, and "Excel," "CSV," "Copy," and "Print" buttons.
- Confirm that showing and hiding columns via the button is working
correctly.
- Confirm that only the first four columns are sortable.
Go to Administration -> Columns settings.
- Expand the "Tools" section.
- Find "id=lettert."
- Make some selections to configure default settings of the reports
table.
- Return to reports and confirm that these defaults are applied.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the staff UI correctly handle the holds_per_day
configuration.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds columns configuration and print/export options to two
tables: The table listing courses and the table listing titles reserved
for a course.
To test you should have more than one course and multiple title reserved
for at least one course.
- Apply the patch and go to Course reserves
- In the table of courses, confirm that all DataTables controls work
correctly: paging, filter, column visibility, export, etc.
- View a course with multiple titles reserved. Test all DataTables
controls on this table too.
- Go to Administration -> Columns settings
- Change the settings for the courses and reserves table and confirm
that these changes are applied correctly.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Ensure that you have four users:
a) A superlibrarian
b) A user with all `parameters` permissions (the toplevel `parameters`
box is checked).
c) A user with the `manage_circ_rules` permission (and, of course,
`catalogue`).
d) A user with the `manage_circ_rules`, `manage_circ_rules_restricted`
and `catalogue` permissions.
2) As all four users, load the "Circulation and fine rules"
administration page (admin/smart-rules.pl).
3) The page should be unchanged for the first three users. It should be
possible to view and edit the circ rules for all libraries.
4) The last (restricted) user should only be able to view and edit the
circ rules for their own library.
Amended by JD: In a second version of this patch
manage_circ_rules_restricted has been replaced by
manage_circ_rules_from_any_libraries and 'no_inherit' related code has
been removed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When clicking Create EDIFACT Order on /acqui/basket.pl, an EDIFACT message will not be generated if aqbasket.branch does not match edifact_ean.branchcode. This failure does not generate any sort of error message, it just fails to produce a message.
We should allow ean's to not require a branch to be set, then if we don't find a branch specific each, we can look for the default version of the ean.
Test Plan:
1) Apply this patch set
2) Run updatedatabase
3) Verify you can create a Library EAN without setting a branchcode for it
4) Verify you can use this EAN to send an EDI order where the basket has a branchcode set
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Testing will require an OverDrive account, you should be able to obtain a
developer account here:
https://developer.overdrive.com/
You will need to register a SIP connection for patron authentication
To test authentication:
1 - Set authname default in OD prefs
2 - Sign in as a patron whose branch matches authname
3 - Verify the patron can sign into OverDrive
4 - Set the patrons branch authname to be incorrect
5 - Verify branch specific authname is used and patron cannot sign in
6 - Set the default authname to be incorrect and patron's branch
authname to be correct
7 - Verofy patron can sign in
To test circulation:
1 - Fill out all OD prefs and enable circulation
2 - Sign in to opac
3 - Verify you have an OverDrive tab
4 - Click 'Login to Overdrive'
5 - If password required you shoudl be prompted, otherwise you should be
signed in and see account info
6 - Test logging out and in
7 - Log-in, perform a search on the opac - you should see hold/checkout
buttons
8 - Test the buttons
9 - After holding/checking out items, check your account page
10 - Verify info is correct
11 - Log out of overdrive
12 - Search catalog click overdrive results
13 - Test "Login to Overdrive" link on OD results
14 - Verify page is reloaded, buttons show and work
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The 'authname' field required for OverDrive can differ per branch.
This patch adds Koha Objects for dealing with OD info and submitting
authnames per branch. The description is left open so future branch info
can be added.
To test:
1 - prove -v t/db_dependent/Koha/Library/OverDriveInfos.t
2 - visit cgi-bin/koha/admin/overdrive.pl
3 - Add some authnames for various branches
4 - Verify data saves correctly
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::CirculationRules->get_effective_rule will become the method to
call to retrieve a specific rule, we should start using it when
possible.
Moreover undef could replace '*' to mean 'any', that way we will be able
to add FK on circulation_rules
TODO: Add more tests
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also, fix a couple small QA issues.
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is the first step in the circulation rules revamp as detailed
in the RFF https://wiki.koha-community.org/wiki/Circulation_Rules_Interface_and_Backend_Revamp_RFC
This patch moves the recent max_holds rule to the new circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the vendor and internal note from the acquisition order
to the subscription detail page
Test plan:
- Create an order from a subscription, fill the internal and vendor
notes
- Go to the subscription's detail page
- Confirm that the columns are displayed in the "Acquisition details"
table and contain the correct values
- Make sure the "Home › Administration › Columns settings" admin page
let you hide them by default (for those who will not need them).
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Apply this patch and make sure to restart memcached (to re-read the yaml
file that is cached)
- Go to Home › Administration › Columns settings
- Confirm that a new "Serials" tab contain the different columns of the
"Acquisition details" table displayed on the subscription detail page
(if an order exist for this subscription)
- Play with it
- Go to Home › Serials › Details for subscription #ID
- Confirm that the "Column visibility" button is now displayed on top of
the table that it works correctly.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Instead of saving the state locally in a variable during Plack lifetime,
we move the saved hash to the cache. We clear the key when we enter
smart-rules.pl. This makes a change in circ rules immediately effective.
Test plan:
Run the modified tests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a configuration option for pickup locations.
To test:
1. Apply patch
2. Go to cgi-bin/koha/admin/branches.pl
3. Observe there is a new column "Pickup location"
4. Click "Edit" for any library
5. Scroll to bottom of the page and select "No"
6. Click "Submit"
7. Observe your library in Libraries-table, notice the value of "Pickup location"
has changed to "No"
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When updating max_holds should be before the categorycode in the update
query.
Things that can be found by testing :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Remove useless 'action' attribute in forms
- $op should never be equal to 'reset', so remove the test
- Move 'op' parameter inside <button>s to avoid having different HTML
tags for elements that have the same kind of behaviour
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Mappings UI now has button that allows one to reset the mappings.
2) Mappings UI displays the items in alphabetical order.
3) Indexing script drops and recreates the index right away, which
helps prevent ES from autocreating a bad index if someone does something
while the first batch of records is being processed.
4) Indexing script has nicer output.
To test:
1) Change mappings.yaml file
2) Reset mappings in UI in mappings.pl
3) Verify the mappings have been changed in UI
4) The field order is alphabetical
5) Rebuild script has clean output
6) Run test t/db_dependent/Koha_Elasticsearch_Indexer.t
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This follow-up changes the display from collection code
to description, following the existing pattern for
location.
To test:
- Repeat test plan from first patch
- Verfiy now the collection descrption shows
- Change column setting in administration
- Verify they work as expected
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This makes the collection visible in the checkouts table
on the details and issues tab in the patron account in staff.
TEST:
1. Check out a few items to patron.
2. View check outs on patron account in staff client.
3. Collection code is not present.
4. Apply patch
5. Notice that not Collection code is visible while viewing check outs.
Signed-off-by: Severine QUEUNE <severine.queune@bulac.fr>
Signed-off by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the system preferences page the lang attribute of the
html tag is always empty.
To test:
- Go to systempreferences
- Check the html source and look at the html tag,
it should read: <html lang="">
- Apply patch
- Check the html source again: <html lang="en">
Verify the language code shown matches the currently
selected language in the staff interface
- Verify the language system preferences work correctly
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The problem was actually that
$lang = $template->param( 'lang' );
should certainly be $lang = $input->param( 'lang' );
and, as it, it overrides the value of 'lang' passed from C4::Auth
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set does several things:
- it removes USER_INFO and BORROWER_INFO
These 2 variables contained logged-in patron's info. They must be
accessed from logged_in_user
- Use patron-title.inc for the breadcrumb at the OPAC, for consistencies
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Apply the patch
- Add an SRU authority server in admininistration -> Z39.50/SRU servers
You can try with the French national library, configured as such:
Hostname: catalogue.bnf.fr
Port: 80
Database: api/SRU
Syntax: Unimarc
Record type: authority
Additional SRU options: version=1.2,sru=get
SRU Search fields mapping example:
Keyword (any): aut.anywhere
Name (any): aut.anywhere
Author (any): (aut.type any "pep org") and aut.accesspoint
Author (personal): aut.type=pep and aut.accesspoint
Author (corporate): aut.type=org and aut.accesspoint
Author (meeting/conference): aut.type=org and aut.accesspoint
Subject heading: (aut.type any "geo ram_nc ram_ge ram_pe ram_co") and aut.accesspoint
Subject sub-division: aut.type=ram_pe and aut.accesspoint
Title (any): (aut.type any "tic tut tum ram_tp ram_tu") and aut.accesspoint
Title (uniform):(aut.type any "tut tum ram_tu") and aut.accesspoint
- Try a search from Authorities -> New from Z39.50/SRU
- Check that the authority is correctly displayed in "Show Marc"
- Check that the authority is correclty added to koha in "Import"
- prove t/db_dependent/Breeding.t
Signed-off-by: François Pichenot <fpichenot@ville-roubaix.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Do some authority searches in Zebra
2 - Switch to ES and repeat, results will vary and some may fail
3 - Apply patch and dependencies
4 - Reindex ES
5 - Repeat searches, they should suceed and results should be similar to
Zebra
6 - Slight differences are okay, but results should (mostly) meet
expectations
A few notes:
We add a 'normalizer' to ensure we get a single token from the heading
indexes, this makes 'starts with' work as expcted
We switch to 'AND' for fields searched from cataloging editor - this
matches Zebra results
We force the '__sort' fields for sorting - if sorting looks wrong try
reducing the heading field to a single subfield - this will need to be
addressed on a future bug (multiple subfields create an array, ES sorts
those randomly)
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At the moment staff users need parameters or parameters_remaining_permissions
in order to be able to change exchange rates for acquisition orders.
This patch adds a new separate permission currencies_manage and
updates staff users currently having those permissions to get the
new permission as well.
To test:
- Create some staff users with different permission sets
1) superlibrarian
2) parameters
3) parameters_remaining_permissions
4) manage_circ_rules, but not parmeters_remaining_permissions
5) all acquisition permissions
- Apply patch and run database update
- Verify new permission has been added and staff users updated
1) remains the same
2) + 3) will have currencies_manage
4) remains unchanged, doesn't have new permission
5) remains the same, will have access now because of having
the top level acquisition permission
- Verify the changed pages work correctly:
- navigation on admin home page
NOTE: the acquisition parameters section will now honor all
different related permissions (edi_manage, budget_manage,...)
- navigation on acquisition home page
- try to access currencies page directly
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Apply the patch
1) Go to administration -> Configure columns, note there is new
checkoutshistory-table in Catalogue section
2) Make some configuration in this table settings
3) Go to detail of any record -> Checkout history
4) The columns should be visible according to your configuration from
step 2
5) Play with Column visibility, to ensure it does work as it should
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed a minor typo during signoff.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Forcing both GetTab calls to list context resolves the warning.
A workaround, not a real fix.
Test plan:
Search for something in the syspref text bar.
Without this patch, you will have a warn: Use of uninitialized value in goto
With this patch, you won't.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 20073: Move Elasticsearch yaml files back to admin directory
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This reverts commit f489d2034b.
This commit breaks the install process when using debian packages.
Reverting as we are very close to the 18.05.00 release
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the possibility to define default indicators in
the MARC frameworks. It adds 2 columns in the marc_tag_structure table in
the database in order to accomplish this. All files that reference this
table have also been updated to reflect these added fields.
Test: Add or edit a MARC framework. In the Field list should be 2 extra
columns. It should be possible to add default indicators (1 character)
in these fields. Nothing else should have changed in the meantime.
The default indicator values are not yet visible in the cataloguing module.
The default values are also loaded in the cataloguing form.
Test: Define default values in some MARC framework. Go to cataloguing
and create a new record using this framework. Verify that the defined
defaults are visible when set. Verify the default is empty (as before)
if no default was set. Verify that if the default is changed, the
record is saved with the manually changed value. Verify that upon
changing such a new record, the manually set indicator value is used
and not the default one from the framework.
Don't forget to run database and database schema update
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes changes to the saved reports template to enable a
columns configuration button. Settings for the table have been added to
columns_settings.yml.
To test, apply the patch and go to Reports -> Use saved.
- Confirm that there is a "Column visibility" button in the
table's pagination toolbar.
- Confirm that showing and hiding columns via the button is working
correctly.
- Confirm that the first, second, and last columns cannot be toggled.
Go to Administration -> Columns settings.
- Expand the "Reports" section.
- Find "id=table_reports."
- Make some selections to configure default settings of the reports
table.
- Return to reports and confirm that these defaults are applied.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
