Same chanegs as before, but for MARC and ISBD details pages
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch tries to simplify some of the logic here to match that on the search results. When we don't have a patron, we fallback to determining if an item can be held buy determining whether there are any items that don't have holds disallowed at the all libraries level. We also remove items with non-holdable statuses like withdrawn etc (and check some system preferences)
If we don't have a patron, then we are done, however, if we do, then we need to check each item against the policies related to that patron.
This patch also removes two checks at the end:
CountItemsIssued($biblionumber)
$biblio->has_items_waiting_or_intransit
These seem to be from bug 4319 - however, those rules are checked by IsAvailableForItemLevelRequest and are only relevant when we have a patron. These checks essentially assumed 'onshelfholds' policy of 'If any unavailable' For consistency sake I think we should follow the same logic as the results page.
To test:
1 - Find a record with two items, of different types, set a 'Default checkout, hold and return policy' of 'No holds allowed'
2 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
3 - Delete that rule, make both items withdrawn
4 - Search opac, not logged in, and verify neither the results page or details page shows the place hold button
5 - Mark one item as not withdrawn
6 - Search opac, not logged in, and verify both the results page or details page shows the place hold button
7 - Log in to opac
8 - Search opac, logged in, and verify both the results page or details page shows the place hold button
9 - Place an 'On shelf holds policy' rule for that patron category of 'If any unavailable'
10 - Search opac, logged in, and verify the results and details page shows the place hold button
11 - Set the other item to not withdrawn
12 - Search opac, logged in, and verify the results page shows the place hold button, but details does not
13 - Try various other scenarios - details page should be more correct, results page is always an approximation
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This moves the show_volumes calculation back out of C4::XSLT into the
controller scripts and refined the search query builder slightly based
on the XSLT equivilent.
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Go to circulation rules and set On shelf holds allowed to If all unavailable
- Log out
- Visit a bib record on OPAC:
http://localhost:8080/cgi-bin/koha/opac-detail.pl?biblionumber=76
- Notice it blows up with error 500
- Apply patch. Repeat
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When we set up a circulation rule where 'On shelf holds allowed' is 'If any unavailable' and we have a record with one 'Ordered' item, we cannot place this item on hold.
This patch allows placing hold on item with negative not for loan values, when using rule with 'On shelf holds allowed' set to 'If any unavailable'
To test:
1. Set up a circulation rule where on shelf holds are not allowed and force the choosing of an item (to facilitate the test)
1.1. Go to Administration > Circulation and fines rules
1.2. In the matrix, add a circulation like this
- Patron category: All
- Item type: Books
- Current checkouts allowed: 10
- Current on-site checkouts allowed: 10
- Loan period: 21
- Holds allowed (total): 10
- Holds allowed (daily): 10
- Holds per record (count): 10
- On shelf holds allowed: If any unavailable
- OPAC item level holds: Force
1.3. Click Save
2. Create a record with one 'Ordered' item (or any negative value not for loan status)
2.1. Go to Cataloging
2.2. Click New record
2.3. Fill out the mandatory fields (by default in MARC21: 000, 003, 005, 008, 040, 245, and 942 (942 should be set to Books))
2.4. Click Save
2.5. Fill out the following item fields
- Not for loan: Ordered
- Koha item type: Books
2.6. Click Add item
2.7. Click Normal to go to the detailed record
3. Try to place a hold on the 'Ordered' item
3.1. From the detailed record, click OPAC view: Open in new window.
--> Note that the 'Place hold' option is not present
4. Add a second 'Available' item
4.1. Back in the staff interface tab with the detailed record, click New > New item
4.2. Make sure the item type is set to Books
4.3. Add a barcode in p
4.4. Click Add item
5. Try again to place a hold on the 'Ordered' item
5.1. Go back to the OPAC tab and refresh the page
--> Note that the 'Place hold' option is still not present
6. Check out the available item to a patron
6.1. In the staff interface tab, copy the barcode from the available item
6.2. Go to Patrons
6.3. Click on Search
6.4. Click Check out next to one of the patrons
6.5. Paste the barcode in the box and click Check out
7. Try again to place a hold on the 'Ordered' item
7.1. Go back to the OPAC tab and refresh the page
--> Note that the 'Place hold' option is now present
7.2. Click Place hold
--> Note that only the checked out item is available to place on hold, if you click Show unholdable items, it will show the Ordered item, but you can't place a hold on it.
8. Apply the patch
9. Go to the OPAC tab and click on the book title right next to 'Place a hold on' checkbox to go back to the record details.
--> Note that the 'Place hold' option is still present
9.1. Click Place hold
--> Note that you can now place a hold on the 'Checked out' or the 'Ordered' item.
10. Check in the item to make it available again
10.1. In the staff interface tab, click on 'Show checkouts' button
10.2. Select the Checked out item and click on 'Renew or check in selected items' button.
11. Try again to place a hold on the 'Ordered' item
11.1. Go back to the OPAC tab and click on the book title right next to 'Place a hold on' checkbox to go back to the record details.
--> Note that the 'Place hold' option is still present
11.2. Click Place hold
--> Note that only the 'Ordered' item is available to place on hold, if you click Show unholdable items, it will show the Available item and you can't place a hold on it.
12. Delete the available item to keep only the Ordered item
12.1 in the staff interface tab, click on 'Search catalog' and search for the record
12.2 click on 'Edit' then 'Edit items'
12.3 Delete the available item
13. Try to place a hold on the remain 'Ordered' item
13.1 Go back to the OPAC tab and click on the book title right next to 'Place a hold on' checkbox to go back to the record details.
--> Note that the 'Place hold' option is present
13.2. Click Place hold
--> Note that you can place a hold on the Ordered item.
Signed-off-by: Amaury GAU <amaury.gau@bulac.fr>
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As I wrote in the bug description, I encountered this problem in a particular case,
so I'll explain it in the test plan, but it's certainly likely to be encountered in different ways.
Test plan:
1) Link authorised values with a field on a MARC framework, like a 942a related to branches
2) Set it on a record with no items
3) Activate syspref "AlternateHoldingsField" and set it to field 942a
4) Go to OPAC View and you will see "Holdings: " without any values
5) Apply this patch
6) Do step 4) again and now it's fixed
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 32555 tries to resolve the issue caused by bug 31313. But the way it is fixed seems to be
at least problematic. With patch 32555 we will never see the difference between
`serial`.`serialseq` and `items`.`enumchron` which is still intended in opac-detail.tt
(line ~ 1332) and [intranet] catalogue/detail.tt (line ~ 446). This is because
ITEM_RESULT.serialitem (in opac-detail.tt) and item.itemserial.serial (in catalogue/detail.tt)
refer to non-existing things. (and therefor the problem described in 32555 no longer emerge).
The original problem is caused by mixing up serialitem with serial in [opac-]detail.pl
and passing serialitem instead of serial to both templates.
To test:
1. Create a serial subscription
1.1. Go to Serials
1.2. Click on New subscription
1.3. Fill out the first form
- Vendor: leave empty
- Record: enter a record number
- Create an item record when receiving this serial
- When there is an irregular issue: Keep issue number
- Manual history: leave unchecked
- Call number: leave empty
- Library: Centerville
- Public/nonpublic note: leave empty
- Patron notification: None
- Location: None
- Collection: None
- Item type: Continuing resources
- Grace period: leave empty
- Number of issues to display: leave both empty
1.4. Click Next (and confirm you are not using a vendor)
1.5. Fill out the second form
- First issue publication date: 2023-01-01
- Frequency: 1/month
- Subscription length: issues 12
- Subscription start date: 2023-01-01
- Subscription end date: 2024-01-01
- Numbering pattern: Number
- Locale: leave empty
- Begins with: 42
- Inner counter: leave empty
1.6. Click Test prediction pattern
1.7. Click Save subscription
2. Click OPAC view: Open in new window.
3. Back in the staff interface tab, receive an issue
3.1. Click Receive
3.2. In Status, choose Arrived for No. 42
3.3. IN ITEM DETAILS BELOW CHANGE h - Serial enumeration / chronology
from No. 42 to some different string
3.3. Click Save
4. Check the items in OPAC and Intranet – you will see only the value from the
item $h subfield (enumchron) instead of desired "enumchron -- serialseq"
in case of a difference between `serial`.`serialseq` and `items`.`enumchron`.
5. Apply this patch
6. Repeat 4
7. Check the items in OPAC and Intranet – you should now see the desired
"enumchron -- serialseq" string.
8. Sign off
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When ordering catalog search by relevance from advanced search, this is not visible in sort order combobox in staff interface.
This is because sort by relevance is a special case not using sort
order.
This patch add a new method C4::Context->default_catalog_sort_by to use
in both staff interface and OPAC.
Test plan :
1.0) On staff interface
1.1) Define system preferences defaultSortField = 'relevance' and defaultSortOrder = 'descending'
1.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected (with a check icon)
1.3) Perform an advanced search on any term, ie 'perl', with sort by relevance
=> Without patch : you see in sort combobox 'relevance' not selected (no check icon)
=> With patch : you see in sort combobox 'relevance' selected (with a check icon)
2.0) On OPAC
2.1) Define system preferences OPACdefaultSortField = 'relevance' and OPACdefaultSortOrder = 'descending'
2.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected
3.0) Run prove t/Context.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch returns the query string from build_query_compat
Under Zebra, either works for the link, for ES we need the simple string
I expand the test for get_components_query to test both engines
To test:
1.0) Set search engine to Elasticsearch
1.1) Go to Tools > Stage MARC records for import
1.2) Upload the example file
1.3) In the form, choose the format 'MARCXML'
1.4) Click 'Stage for import'
1.5) Click 'Manage staged records'
1.6) Click 'Import this batch into the catalog'
2) Change MaxComponentRecords to 10
3) In the staff interface, search the catalog for 'easy piano'
4) Click on the record 'Easy piano pieces for children'
5) Click on the 'show all component parts' link at the bottom of the Components tab
--> it searches for HASH(...) - returns no results
6) Try the same in OPAC
--> it searches for HASH(...) - returns no results
7) Apply patch and restart all
8) repeat 3-6
9) Results returned!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No test plan: parameter is already obsolete.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset adds an 'interface' parameter to XSLTParseForDisplay to avoid fetching
coins when not needed
Additionally we move some logic from the scripts to searchResults to avoid an extra fetch fo the biblio object
To test:
1 - Enable COinSinOPACResults syspref
2 - Also enable OPACShowOpenURL and OPACOpenURLItemTypes - adding an itemtype that you can find
3 - Perform a search on the OPAC and confirm coins are included and openurl shown
4 - Perform a search on staff client and confirm openurls do not show
5 - Apply patch
6 - Results should be the same
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the part_number and part_name in the opac results browser.
To test:
0. Apply patch
1. Download the sample records and import into Koha
1.1. Download the sample mrc file
1.2. In Koha staff interface, go to Tools > Stage MARC records for import
1.3. Click 'Browse' and choose the file
1.4. Click 'Upload file'
1.5. Click 'Stage for import'
1.6. Click 'Manage staged records'
1.7. Click 'Import this batch into the catalog'
2. Make sure OpacBrowseResults is enabled
2.1. In Koha staff interface, go to Administration > Global system preferences
2.2. Search for OpacBrowseResults
2.3. If necessary, change to 'enable' and click 'Save all OPAC preferences'
3. In OPAC, search for BFF and browse the results
3.1. In Koha OPAC, search for BFF
3.2. Click on one of the titles to access the opac-detail page
3.3. Click 'Browse results'
--> The browser should show the main title, along with the number and volume title.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a check for the preference OPACAcquisitionDetails and fetches
the active orders for the item if necessary
Additionally, we simply the check for biblio orders to use object methods
and remove code that stored order information in the item_info
To test:
1 - Enable preference: OPACAcquisitionDetails
2 - Create a basket with items created on order, add an order for a biblio, close the basket
3 - Create a second basket as above, add an order with multiple copies, leave basket open
4 - View biblio on opac
5 - You should see 1 item marked on order, and "1 items on order" below items table
6 - Close second basket
7 - Reload opac view, now 3 on order and in message
8 - Reopen first basket
9 - Reload opac view, now 2 on order and in message
JK: Remove unused @itemnumbers_on_order variable
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: This patch disables the API call (which is not really needed),
and still needs attention in a following patch.
Test plan:
Add opac_info for two libraries and a branchurl for one of the two.
Select a biblio with an item having these two libraries as either
home or holding branch.
Toggle OpacLocationBranchToDisplay and check items table on opac
detail. Click on the library name.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have an item with a callnumber defined
2. Have OPACShelfBrowser enabled
3. Open the record detailed view in the OPAC
4. Click on 'Browse shelf'
=> FAIL: It explodes
5. Apply this patch
6. Repeat 4
=> SUCCESS: It works!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) lead to
koha-tmpl/opac-tmpl/bootstrap/en/includes/item-status.inc
use the bundle_host method directly through the passed
Koha::Item object, thus the bundle_host field added by
this script is unused.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) caused the OPAC detail page only show
"Available" status even when the item was in transit.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) cause the OPAC detail page only show
"Available" status even when there were waiting holds.
The onhold item field is removed at the same go as it was confusing
and unused since "Bug 2655: Fixes availabilty counts if items are on
hold shelf. Patch (2/2)" (a37545eb1)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This prefetches objects we are using in templates to avoid extar DB calls
The branch fetches won't actually be used without the extra patch on 31314 that
adapts home_branch and holding_branch routines to use result objects
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This ensures host items from otehr biblios are returned as well
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Has to move some code to a method
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search_ordered.
Here we are going to deal with opac-detail
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This new enhancement add the capability to list the different
identifiers of authors. It is helpful for research publications for
instance.
This patch will add a new "Author identifiers" tab on the detail page
(OPAC) of a bibliographic record, with the list of the authors and their
identifiers.
On the detail page of the authority record, the same identifier list
will be displayed.
Test plan:
Create some authority with
024
$a source
$2 number
$6 link to the source
With the pref turned ON you will be able to see the new information.
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
See first patch. Add orgcode OCoLC.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to pass OCLC_NO as key to C4::Output::parametrized_url.
We get it from MARC21 035$a and strip the organizational code.
Test plan:
Add e.g. 62385712 in 035$a in a record.
Add e.g. following link to pref OPACSearchForTitleIn:
<a href="https://worldcat.org/search?q={OCLC_NO}" target="_blank">WorldCat (via OCLC number)</a>
Open that record on detail page. Click More searches. Follow that link.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the 'In bundle: Link' to the OPAC to mirror what we have
on the staff client.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does the absolute bare minimum to prevent private notes from
appearing on the OPAC.
Test plan
1. Go to Koha Administration -> Koha bibliographic frameworks
2. View the MARC structure for your BKS framework (or something else)
3. Search for tag 583, edit subfields
4. Go to subfield 'x' - nonpublic note. Confirm the OPAC visibility
checkbox is UNCHECKED.
5. Edit or create a record using the BKS framework. Put a note in the
583$x.
6. View this record in the OPAC
7. Go to the Title notes tab. Confirm the non-public note is
showing, even though the framework says it should not be
visible via the OPAC.
8. Apply patch
9. Confirm the non-public note is no longer visible
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
ComponentSortField
ComponentSortOrder
These allow the user to choose how components should be sorted when displaying on the details page
of a record, and the corresponding search for all components
This also updates our search from simple_search_compat to search_compat to allow for sorting options
Note:
Some sorting under ES is unclear - this is a separate issue to be invesitgated
Our Zebra index does not offer 'record number' sorting, I will file a bug for that
To test:
1 - Enable UseControlNumber (or not)
2 - Add some components to a record by control number or title depending on above
3 - Enable ShowComponentRecords syspref
4 - View the record that has components
5 - Note they are not sorted
6 - Apply patch, updatedatabase
7 - reload record
8 - Note components are sorted by title ascending
9 - Try different values for ComponentSortField and ComponentSortOrder
10 - Confirm sorting changes with system preferences
11 - Repeat test on staff and opac, with ES and Zebra search engines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan :
Display a biblio record with some MARC notes in details page and basket,
OPAC and staff
Run prove t/db_dependent/Koha/Biblio.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When viewing the detail page of the first or last record of a result page,
it's not possible to browse to another page when using Elasticsearch.
To test:
1) Search for "*" in the OPAC
2) Click on the last result of the page
3) Observe that you cannot browse to the next page
4) Apply the patch
5) Search for "*" in the OPAC
6) Click on the last result of the page
7) Observe that you can browse to the next page
8) Sign off
Sponsored-by: Lund University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- place a biblio-level or item-level recall via the biblio detail page, OPAC search results, or course reserves
- view or cancel your active recalls from 'your summary' recalls tab
- view all active and inactive (and cancel active) recalls from 'your recall history'
- stopped from placing a reserve on an item that the patron has already recalled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On the ktd sample database when trying to go to the detail page from the result list:
Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_opac_opac_2ddetail_2epl::searchResults called at /kohadevbox/koha/opac/opac-detail.pl line 260
Turning off OpacBrowseResults makes the error disappear.
In opac-detail.pl, use C4::Search is missing searchResults and getRecords
To test:
- Search for something that gives several result pages in OPAC, example: e
- Switch to one of the last pages using link on top of results, example: 10
- Open any of the records listed in detail view
- Verify that the error is shown
- Apply patch and repeat, error is gone and browsing behaves as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There's no way to use 'no' XSLT now, so don't need to use this to show
authors on the detail page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves C4::Biblio::GetMarcAuthors to
Koha::Biblio->get_authors_from_MARC. This is so the method can be
used in templates and notices.
To test:
1. Find a record that has an author in the added entry field (700-720).
2. Add the record to the cart and a list.
3. View your cart and click 'more details'. Confirm authors show as
normal.
4. Click 'send' and confirm the email sent shows the authors as normal.
5. Go to the list you added the record to and click 'send list'. Confirm
the email sent shows the authors as normal.
xslt)
6. Log in to the OPAC. Find the record and add it to the cart and a list
7. View the cart and click 'more details'. Confirm authors show as
normal.
8. Click 'send' and confirm the email sent shows the authors as normal.
9. Go to the list you added the record to and click 'send list'.
Confirm the email sent shows the authors as normal.
10. Confirm tests pass:
- t/Biblio.t
- t/db_dependent/Koha/Biblio.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
It is a confusing name because we have 'Article Request' as a feature,
and this does not follow Koha terminology.
Test plan:
`updatedatabase` and confirm that the syspref has been renamed
`git grep RequestOnOpac` => No occurrence in the code
QA: The syspref's value is always retrieved using Koha.Preference from
.tt files, we don't need to send it from controllers or C4::Auth
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the functional fixes introduced in bug 29284 and
also prevents the 'Show analytics' link from displaying when no
component parts are found and inline display is enabled.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Fixed error with $err vs $error(s) :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We were fetching components in the first call of XSLTParse4Display
(opac-detail around L220). And again (opac-detail around L660).
Same for catalogue/detail.pl.
Moving the XSLT block in both scripts and removing the code from
XSLT.pm which again makes the tests obsolete.
Not hiding the link when there are components. Might be helpful too.
Also fixing biblionumber in the XSLTParse4Display call for parts.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
