This patch re-implements and adapts the changes dcook@prosentient.com.au
submitted in a patch which no longer applies. I have changed the
"alert" style messages to "message" style to match the style
which is applied to "hold found" messages elsewhere.
I have also revised the language in a way that I think is more
clear and accurate.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
If at least one of both sysprefs (ExportRemoveFields and
ExportWithCsvProfile) is filled, the export link is displayed
Signed-off-by: Marc Veron <veron@veron.ch>
Tested with both sysprefs filled/not filled, patch behaves as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch documents the cn_sort and agerestriction fields
in the biblioitems and deletedbiblioitems tables.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The borrowers table has the wrong documentation for the alternate
address3 and city fields. This fixes that.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch is not related nor introduced by bug 8739, but while qa-ing it, I found those 2 perlcritic violation
this patch fixes it !
I also fixed a tiny indentation problem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Confirmed using test plan that the display is corrected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
this patch fixes a glitchy symlink to tiny_mce
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Note that you have to *remove* koha-common then install fresh in order
to recreate the symlink.
VERY IMPORTANT!!! debian/rules MUST USE TABS. USE -n WHEN COMMITING
THIS PATCH, AND DO NOT REPLACE TABS WITH SPACES.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, when you click "Holds to pull" from the Circulation menu, the only thing that you see is a white screen and a side navigation bar that says "Refine Results".
Since there appear to be no results to refine, the holds to pull list appears completely empty. Staff have to know to click "Submit" on the "Refine Results" form to get anything.
I propose that we have the "run_report" flag set to ON for the initial load. The report uses the default 2 days mentioned in the "Refine Results" form, so there is continuity across the board.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, when you click "Holds to pull" from the Circulation menu, the only thing that you see is a white screen and a side navigation bar that says "Refine Results".
Since there appear to be no results to refine, the holds to pull list appears completely empty. Staff have to know to click "Submit" on the "Refine Results" form to get anything.
I propose that we have the "run_report" flag set to ON for the initial load. The report uses the default 2 days mentioned in the "Refine Results" form, so there is continuity across the board.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Although fields in the authority editor should support thesaurus
control, they should never be locked, as authority records commonly
refer to other records that may not be in use locally (and therefore
might not be in the authority file).
Test plan:
1) Make sure a 5xx field in one of your authority frameworks is
thesaurus-controlled.
2) Note that you cannot edit the field directly.
3) Apply patch.
4) Note that you can now edit the field irectly.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, Koha creates a default value of 2 days ago (-2) for the start date of the Holds to pull List. This system preference allows users to specify their own default start date for this list, since users might not want to have to manually change the date all the time when they already know the set date period they want to view.
The system preference value is specified as a positive integer, which is then passed as a negative integer in the handler script. This saves users from having to include a qualifer to the sys pref value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Added the following missing code to ensure the correct icon
is used when logged out:
IntranetFavicon => C4::Context->preference('IntranetFavicon')
This was added into an existing $template->param() call.
Not to be confused with the koha logo on the login page, the
icon is a 16x16 pixel graphic in the browser tab. The default
is found at .../intranet-tmpl/prog/en/includes/favicon.ico.
If the "IntranetFavicon" system preference is set, it should be
used by the staff client regardless of login state. It was not
being used in the "AUTH rejected" section of Auth.pm, but the
OpacFavicon variable was being set. This explains why the
"OpacFavicon" system preference works for the OPAC client, but
not the staff client upon logout.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works better now, creats biblio records, and cleans up after itself as
well.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Patch adds the "zebra-striping" option to the
table sorter initialization and changes the row
color CSS to match the tablesorter's to prevent
conflicts.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Warn the user that the current biblio record might be overwritten by
this action.
http://bugs.koha-community.org/show_bug.cgi?id=8583
Signed-off-by: Marc Veron <veron@veron.ch>
Woks as expected. I prefer this solution with an explicit warning,
since several times I acidentally changed a record :-)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This script batch deletes biblios which contain a biblionumber
present in file passed in parameter.
If one biblio has items, it is not deleted.
http://bugs.koha-community.org/show_bug.cgi?id=8674
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Created file with biblionumbers for bibs with and without items.
Only the bibs without items were deleted.
Bugzilla description (from delaye):
1 / Create a list of authorised values(INVENTORY_NUMBER). In which the
code is the prefix and the description the last number assigned.
2/A space between the prefix and number.
3 / From a holding record, after indicate the prefix when you click on
the plugin -> koha search the last number from authorised values
assigned in the list and increment n +1 level meter
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as advertised (see provisos below). Tested the following:
1) INVENTORY category has only authorised value 'PR' => PR prefix filled
in, everything else gives an error.
2) INVENTORY category has two authorised values, both work.
3) INVENTORY category has no authorised values, nothing is incremented
4) Barcode contains numbers, nothing is changed.
Two potential gotchas (neither of them significant enough to warrant
changing, in my opinion):
1) Prefixes must consist only of uppercase alphabetical characters.
2) Negative numbers are padded with zeros to the left of the negative
sign.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Searching for a 10 or 13 digit numeric string that does not exist in
one's catalog will fail to affect SQL statement correctly
in C4::Breeding. Moved string substitution, which was triggering error
when search was undefined, and fixed if statements accordingly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
An eval { eval "require $module;" }; was replaced with
eval { eval { require $module; }; }; which is a no-op, meaning that
the linker was not getting loaded, and the catalog module was throwing
up a big nasty error every time someone tried to save a record with a
heading. This patch replaces the require with can_load from
Module::Load::Conditional, which is PBP-friendly, and offers equivalent
functionality.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This fixes the display of different sized words for differently popular
tags. It is a bit of a refactor of that part of the system, moving
logic to more sensible places (and removing an unused method on the
way.)
Note that it isn't an attempt to reproduce what was there previously,
just to do something similar, and in an easier to change fashion.
Sponsored-By: New Zealand Educational Institute
Signed-off-by: Marc Veron <veron@veron.ch>
Works as expected.
Adds a system preference BlockReturnOfWithdrawnItems to control
whether or not Koha should allow a withdrawn item to be returned
or not.
Also fixes the behavior where Koha will attempt to use a withdrawn
item to fill a hold.
Test Plan:
1) Set BlockReturnOfWithdrawnItems to "Block" ( this is the default )
2) Check an item out to a patron
3) Mark item as withdrawn
4) Attempt to return the item, you should still see the item on the
borrower's record
5) Set BlockReturnOfWithdrawnItems to "Don't Block"
6) Attempt to return the item, you should see the item is no longer
on the borrower's record.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This test file is meant to be used with the sample database
with a minimum of the sample libraries and sample holidays installed.
http://bugs.koha-community.org/show_bug.cgi?id=8110
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Prior to this patch, see also references in certain authority records
(most notably GND records) were being followed by empty parentheses in
the search results display. This patch resolves that problem.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Fixes several perlcritic complaints, and some overflow in the
configuration page. Also notes that Did You Mean is not yet
enabled on the staff client.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Sorry about the problematic last attempt at uploading. I missed a
patch when squashing. It is now included.
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the jQueryUI upgrade
When working with hierarchical subject headings, it is sometimes helpful
to do a search for all records with a specific subject, plus
broader/narrower/related subjects. This patch adds a suggestion plugin for
these "exploded" subject searches to Koha. Note that this patch depends on
both bug 8211 AND bug 8209.
To test (NOTE: this test plan covers both 8211 and 8726):
1) Make sure you have a bunch of hierarchical subjects. I created
geographical subjects for "Arizona," "United States," and "Phoenix,"
and linked them together using 551s, and made sure I had a half
dozen records linking to each (but not all to all three).
2) Do a search for su-br:Arizona (or choose "Subject and broader terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "United States"
3) Do a search for su-na:Arizona (or choose "Subject and narrower terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona" and the
records with the subject "Phoenix"
4) Do a search for su-rl:Arizona (or choose "Subject and related terms"
on the advanced search screen with "more options" displayed), and
check that you get the records with the subject "Arizona," the
records with the subject "United States," and the records with the
subject "Phoenix"
5) Ensure that other searches still work (keyword, subject, ccl,
whatever)
6) Use "Did you mean?" page in admin section to enable ExplodedTerms
plugin
7) Do a keyword search on the OPAC, confirm that searching for exploded
terms is suggested.
8) Do a subject search on the OPAC, confirm that searching for exploded
terms is suggested.
9) Do a non-keyword, non-subject search on the OPAC, confirm that
searching for exploded terms is NOT suggested.
10) Disable ExplodedTerms plugin and enable AuthorityFile plugin.
11) Do search on OPAC, confirm suggestions are made from authority file.
12) Sign off
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Split into two patches. This patch includes only the functionality.
Four new options, one for single holidays, one for the repeatable holidays.
One to create exceptions on a range of dates, one to delete exceptions in a range of dates.
Note that the exceptions are not deleted if you delete a range of repeatable dates.
But if you delete a range of single holidays the exeptions inside will be deleted.
Signed-off-by: Stephane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This bug enables accented/diacritic system preference text to be matched
when searching for sysprefs.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The fresh install of Debian, with the debian.koha-community.org
repository, only has version 1.20 by default. As only the most
basic functionality is being used, this version number should be
lowered from 1.26 to 1.20 in ./C4/Installer/PerlDependencies.pm
to make git installations cleaner.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
