Web install on Ubuntu 16.04/Mysql 5.7 fails.
This patch makes small changes to make installation
possible to kohastructure.sql and some sample files.
Sample values for quotes table can't have '0000-00-00 ...' values
nor NULL values, now() is perhaps an option.
Depends on Bug 16572
To test:
1) System with MySQL 5.7, for example Ubuntu 16.05
2) Apply 16572
3) Try web install, it fails
4) Apply this and next patch
5) Try again, now it succeed
This is only for English install, i18n files needs revision
I can do that if this is accepted.
Perphaps a change is needed to updatedatabase.pl
Ammended patch, 'created_on' field on virtualshelves
can't be timestamp default null, mysql 5.5 complains
that only one timestamp column can be defined as
default not null. Changed to 'datetime' type.
Can provide followup with updatedabase change,
but need an opinion if this type change makes sense.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
followup to previous patch.
This patch fixes linkid value. It was set to '', but
declared as tinyint.
Mysql < 5.7 replaced this with nearest right value, i.e 0
Mysql 5.7 gives error here.
Also some normalization, all lines with data begins with two tabs
To test:
On top of Bug 16572 and previous patch
1) Run webinstaller
2) Add mandatory values
3) There must be no problems on MySQL 5.7
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records and ensure no changes have been made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the
Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displyaed and nothign is displayed if not
7 - Repeat with all staff view options
Sponsored by:
Walla Walla Public Library (http://www.wallawallapubliclibrary.org/)
Los Gatos Library (http://www.losgatosca.gov/42/Los-Gatos-Library)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Internal signoff.
Signed-off-by: Alexis Rodegerdts <arodegerdts@wallawallawa.gov>
Signed-off-by: Dwayne Nance <dnance@ebsco.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) back up DB
2) drop database koha_library;
3) create database koha_library;
4) run web browser install, choose ALL defaults
-- notice the SQL syntax warning.
5) apply patch
6) repeat steps 2-4
-- notice SQL syntax warning is gone.
7) run koha qa test tools
8) restore db
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.
Sponsored by:
North Central Regional Library (http://ncrl.org/)
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to select search index
I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:
cgi-bin/koha/admin/aqbudgetperiods.pl
cgi-bin/koha/admin/admin-home.pl
cgi-bin/koha/cataloguing/addbooks.pl
cgi-bin/koha/circ/returns.pl
cgi-bin/koha/circ/circulation-home.pl
cgi-bin/koha/admin/cities.pl
cgi-bin/koha/admin/aqcontract.pl
cgi-bin/koha/admin/currency.pl
cgi-bin/koha/mainpage.pl
cgi-bin/koha/tools/letter.pl
cgi-bin/koha/members/members-home.pl
cgi-bin/koha/admin/categories.pl
cgi-bin/koha/admin/preferences.pl
cgi-bin/koha/admin/printers.pl
cgi-bin/koha/serials/serials-home.pl
cgi-bin/koha/acqui/newordersuggestion.pl
cgi-bin/koha/admin/z3950servers.pl
Sponsored by:
Northeast Kansas Library System (http://nekls.org/)
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new system preference:
PatronQuickAddFields
When either this pref or BorrowerMandatoryField is populated this will add a new dropdown to the bew patron toolbar.
When a category is chosen from this dropdown the fields in PatronQuickAddFields and BorrowerMandatoryField will be displayed.
There will be a button allowing a user to switch from the quickadd to the full form and fields will be copied between the forms when toggling.
The Quick add will only be displayed on add of a new patron, future edits should display the full form.
Test plan:
1 - Apply patch
2 - run updatedatabase.pl
3 - Add a new patron and ensure nothing has changed
4 - Populate either PatronQuickAddFields or BorrowerMandatory fields
and note the new button for adding a patron
5 - Click the Quick add and choose a type
6 - Only required or quick add fields should be displayed
7 - Verify toggling forms copies information
8 - Ensure you cannot save patron without filling required fields
(quick add fields should be optional)
9 - Ensure you can save patron with fields filled out
10 - Ensure that a duplicate patron brings up the duplicate/add new
buttons with full form displayed
11 - Verify that subsequent edits use only full form
12 - Verify that data on form submitted is the data saved to patron
13 - Test with various values in both MandatoryBorrowerFields and PatronQuickAddFields
Sponsored by: VOKAL (Vermont Organization of Koha Automated Libraries)
Followed test plan, works as expected.
Re-tested together with followup, works as expected (2016-06-02)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch answers Jonathan's request to simplify this patchset a bit.
It removes the need for the .sql file, as _default_rule now defaults to
a fixed value (1, which was set by the removed .sql file).
This allowed to remove the overloaded ->delete method.
The tests have been adjusted to reflect this changes, including tests for
the new 'default'-if-absent situation.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces the changes to the sysprefs and the atomic update
that creates the new table.
It picks the syspref value for RefundLostItemFeeOnReturn and uses it to
create a default (branchcode='*') rule on the new table.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch introduces new classes for handling refund lost item fee
rules. It introduces a new table for storing this rules.
It is designed so it is possible to define a global rule, and then
branch-specific ones. The specific is prefered if available.
This behaviour is fully tested by unit tests introduced by the following patches.
This cannot be tested on its own.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
As of comment #5, adding file
installer/data/mysql/atomicupdate/bug_Bug_16768_official_number_format_switzerland.sql
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the update for April 2016 changes of Library of Congress
The basic creation of the files is done in http://translate.koha-community.org/files/it/mandatory/
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both files load without problems.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Start with a fresh database
2) Check mandatory bibliographic and authority files
load without problem using the German web installer
3) Check new fields/subfields are ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Not a german speaker but seems right :)
File loads without problem.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the new sysprefs work as the previously defined. Instead of falling back
to what *ResultsDisplay is set, it now has its own 'default' (that still defaults to the
*Results*.xslt).
The default values are set to 'default' as the rest of XSLT-related sysprefs, and the upgrade
picks whatever is set in OPACXSLTResultsDisplay and XSLTResultsDisplay so current behaviour
is preserved.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
New XSLTs for Lists work as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Jonathan noticed the current behaviour is that the lists rendering
falls back to the XSLTResults, and if not defined (i.e. != 'default' and
!= some_path) it falls back to a legacy display (non-XSLT).
The patchset changed this behaviour because 'default' is not a valid value
for the lists. So it should fallback to the current behaivour (i.e. Results
XSLT configuration) if not defined. This patch fixes this by adding
|| C4::Context->preference('XSLTResultsDisplay')
(and the OPAC counterpart).
It also fixes minor glitches on the update message (oops) and bad default value
in sysprefs.sql for 'XSLTListsDisplay'.
Thanks Jonathan!
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch introduces two new sysprefs, allowing the users to
set custom XSLTs for lists display. This is done almost the usual
way.
If none is specified (value='') it defaults to the current behaviour:
using the *Results.xsl file for the corresponding interface.
Sponsored-by: Carnegie Stout Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Deb Stephenson <DStephen@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
IGNORE should be used to allow backporting (and local patch)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a timestamp column to the borrowers table in kohastructure
and updatedatabase. (And also to the deletedborrowers table.)
A timestamp may be useful in synchronizing with external systems (among other
reasons).
Test plan:
Run updatestructure on an existing database, or install a new one.
Verify that the borrowers table has a timestamp now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested updatestructure and running kohastructure.sql.
Passed t/db_dependent/Members.t.
updatedatabase.pl did not apply. I edited and then run it. Columns were added as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Bug 10459: Follow up to update to atomic update methodology
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New column created, no errors.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It seems that if subscription_numberpatterns.numberingmethod contains parentheses, updatedatabase.pl crashes when running the 3.23.00.006 DB upgrade snippet, with the following error:
[Mon Jun 6 09:06:54 2016] updatedatabase.pl: Unmatched ( in regex; marked by <-- HERE in m/ ( <-- HERE / at /home/koha/kohaclone/installer/data/mysql/updatedatabase.pl line 11498.
Steps to reproduce:
1/ Have a Koha DB version<3.23.00.006
2/ Create a subscription numbering with parentheses in it:
ie "Vol. (Month, Year)" with pattern
Vol. {X} ({Y}, {Z})
3/ Add some serials using that numbering method so that serialseq is filled in DB:
ie "Vol. 16 (February, 2015)"
4/ Run the updatedatabase.pl script either from the cli or just start the webinstaller
5/ The error is produced
To test:
1/ apply patch
2/ try to reproduce this issue once again, should be fixed now
3/ have a look at the code, make sure the changes are consistent
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note: I have not tested the patch, but the diff looks good.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These 2 tables should be dropped before trying to create them
Test plan:
From the SQL CLI, source the kohastructure.sql file
source it again
=> Without this patch you get 2 warnings
ERROR 1050 (42S01) at line 3580 in file:
'installer/data/mysql/kohastructure.sql': Table
'additional_fields' already exi
sts
ERROR 1050 (42S01) at line 3596 in file:
'installer/data/mysql/kohastructure.sql': Table
'additional_field_values' alrea
dy exists
=> With this patch, you won't get them
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Before Bug 16200 expired holds have used accounttype F which is also used by
other type of fines. This patch updates all existing expired holds to new
accounttype HE (Hold Expired).
To test:
-1. Make sure you translated the string in previous patch of this buug
1. Find a Patron with "Hold waiting too long" fines and go to his Fines tab
2. Change Koha's language to some other than English
3. Observe that "Hold waiting too long" is still in English
4. Apply patch and run database update
5. Go back to Patron's Fines tab
6. Observe that "Hold waiting too long" is now translated
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Alternative POC solution, on top of
previous patches, feel free to obsolte.
This patch use DBIx::RunSQL->run_sql_file
to procees each sql file.
To test:
1) Apply all patches
2) Same test plan of patch 1
Timing test running web installer, marc21,
all sample data, time in seconds
a) without patch
structure data
59.7 66.5
58.6 66.0
b) SQL::SplitStatement (patch 1+2)
59.4 101
59.7 102
c) DBIx::RunSQL (patch 3)
60.7 66.8
59.4 66.2
Tomas' version is a bit slower loading sample data,
all give similar results processing kohastructure.
New dependency to package: DBIx::RunSQL
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The current table creation order is left to mysql's strategy, which is not
suitable for parsing the SQL files and passing one statement at a time in
the current order.
This patch just moves table creation statements around so FK constraints are
defined for previously created tables.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same test plan of Bug 16460
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem, for es-ES files
3) Check new fields/subfields
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
es-ES frameworks updated
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Update No. 22
Bibliographic
New 382$r, 382$t, 753$0, 753$2
Modified 382$e
Authority
New 382$r, 382$t
Modified 382$e
Also added final 'S' on 654 description
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
For comparison:
https://www.loc.gov/marc/bibliographic/bdapndxg.htmlhttps://www.loc.gov/marc/authority/adapndxf.html
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Easy this time, only sample notices have been changed:
- Changed discharge to match the English sample notice.
- Translated new PASSWORD_RESET e-mail
To test:
- Start with an empty database
- Install de-DE
- Run the web installer in de-DE/German
- Verify all files, especially sample notices, load
without any problems.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested removing all from letter table and loading file.
File loads Ok, notices look good.
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When doing a hacked install off the master branch:
use ... {koha database name}
truncate creator_layouts;
truncate creator_templates;
truncate printers_profiles;
source installer/data/mysql/... {name of a sample_labels type file}
Warnings are generated, which may not be visible in the UI.
Most of the warnings were triggered by:
-/*!40000 ALTER TABLE `creator_layouts` DISABLE KEYS */;
-/*!40000 ALTER TABLE `creator_layouts` ENABLE KEYS */;
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_er_illegal_ha
In the Russian, the layout_name was truncated, because the layout_name was only 20. An atomic update sql and kohastructure.sql update were provided to widen it to 25.
http://dev.mysql.com/doc/refman/5.7/en/error-messages-server.html#error_warn_data_truncated
Also fr-FR, ru-RU, and uk-UA were slightly different in structure, so the structure was made the same as the other files.
See comment #1 for the test plan.
NOTE: pl-PL is likely very out of date, but is not affected in this regard.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no more warnings
mysql> show warnings;
Empty set (0.01 sec)
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A primary key should not contain null value, and MySQL v5.7 is now more
strict and won't accept our errors in the DB structure.
Test plan:
mysql < installer/data/mysql/kohastructure.sql
should work using MySQL v5.7
QA:
- letter.branchcode should not be NULL, the default (all) is an empty
string
- permissions.code should not be NULL, it's always a string
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Clean install of Ubuntu 16.05, MySQL 5.7.11
kohastructure.sql loads ok, just one warning
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This column has never been used and can be removed.
Test plan:
1/ update the schema
2/ prove t/db_dependent/Acquisition.t
should return green
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test green pre & post patch
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
TEST PLAN :
- install Koha
- choose fr-CA as the installation language
- check every options in the web installer
- every file should load smoothly
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, no problem/warning loading all sample files.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
While many of us would like to get rid of biblioitems one day, the current
scheme includes a biblioitemnumber and a biblionumber in Items.
(Which is not so great..)
But also note that biblionumber is NOT defined as a foreign key in Items,
although a belongs_to relation has been added to the DBIx scheme!
This inconsistency should be resolved. The "remove biblioitem table"
operation is a large one, but in the meantime we better make biblionumber
a regular FK not a 'pseudo' one.
Note: If in an (very) exceptional case biblionumbers are found in items,
that do not exist in biblio, this patch prints a warning at upgrade
time and does not add the constraint.
@RM: Please update the DBIx scheme accordingly.
Test plan:
[1] Run the upgrade. Check if the FK constraint has been added.
[2] Remove the FK constraint. Change the biblionumber of one item to an
unexisting record. Run the upgrade again. Notice the warning.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested both cases: constraint added as well as warning printed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
mysql < installer/data/mysql/sysprefs.sql
should work
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the new pref is named EnhancedMessagingPreferencesOPAC, it will show
up adjacent to EnhancedMessagingPreferences
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Change the preference Enhancedmessagingpreference description.
- Enable default EnhancedMessagingPreferences and OPACEnhancedMessagingPreferences.
- not sent e-mail it's necessary, when user call opac-messaging.pl directly..
Testing:
I Apply the patch
II Run updatedatabase.pl
0) Search OPACEnhancedMessagingPreferences preference;
1) Validate "OPACEnhancedMessagingPreferences show patron messaging
setting on the OPAC (NOTE: EnhancedMessagingPreferences must be
enabled).";
2) Disable OPACEnhancedMessagingPreferences preference;
3) Enable EnhancedMessagingPreferences preference;
4) On the OPAC -> user's settings, validate "your messaging" is not
showed.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Works as expected. With the new syspref, patrons can be forbidden to
modify themselves their own messaging preferences.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Also, I like sysprefs
http://www.quickmeme.com/img/d9/d99723bc544e8d33572dc92f242a6f6e2dbe0126a2e35fe3de073d30d62002e6.jpg
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by
sysprefs.sql and does not appear in updatedatabase.pl, we could easily
imagine that nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set. Otherwise you need to turn
the XSLT off. In this case you will see the images on the result list
(OPAC+Staff interfaces) and OPAC detail page, but not the Staff detail
page.
This patch suggests to remove completely this feature as it does not
work correctly.
The ability to assign an image to an authorised value is now always
displayed, but the image will only be displayed on the advanced search
if defined.
Test plan:
Confirm that the authorised value images are no longer visible at the
opac and the staff interfaces.
The prefs should have been removed too.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This feature is enabled by default, but the users are not aware of it
and it costs a lot of time processing to get the images.
There are 2 prefs to drive this feature: StaffAuthorisedValueImages and
AuthorisedValueImages. AuthorisedValueImages is not added by sysprefs.sql and
does not appear in updatedatabase.pl, we could easily imagine that
nobody uses it.
With XSLT enabled, the feature is only visible on a record detail page
at the OPAC, if AuthorisedValueImages is set.
Otherwise you need to turn the XSLT off. In this case you will see the
images on the result list (OPAC+Staff interfaces) and OPAC detail page,
but not the Staff detail page.
The idea of this patch is to introduce a quick switch if the feature is
not used by the library.
Test plan:
1/ Turn the pref on and set authorised_values.imageurl to NULL
Execute the DB entry
=> The pref have been turned off
2/ Turn the pref on and set an image for an authorised value
Execute the DB entry
You will get a warning
3/ Turn the pref off and set an image for an authorised value
Execute the DB entry
You will get a warning
4/ Turn the pref off and set authorised_values.imageurl to NULL
Execute the DB entry
You won't get a warning
Note that the opac detail page now checks the pref before retrieving the
images.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed update message 'that means'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Add `AFTER` to DB update
* Change "Is standing order basket:" to "Orders are standing:"
* Disable item creation when adding from a staged file
* Correctly show is_standing for existing baskets
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This allows creation of special baskets that include standing orders.
These orders do not have a known quantity (and may not have a known
price in advance). Upon receipt, the received items are split into a new
completed order.
Test plan:
1) Run updatedatabase.pl.
2) Run prove t/db_dependent/Acquisition/StandingOrders.t . (and the
other Acquisition tests).
3) Create a new basket, mark it as a standing order basket.
4) Add an order to this basket, and notice that the quantity field is
missing (and thus not required).
5) Receive items for this order, and notice that the original order is
unchanged. The new child order line should have the correct price
and quantity information.
(Note: the QA tools output what seems to be a spurious spelling error
for Test::More's "isnt" in StandingOrders.t.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like the ability to select the itemtype to request
when placing holds. For example, if a record has 3 copies of BookA and 3
copies of BookA in large print, this feature would allow a person to
place a hold on the record, but still be able to target only the Large
Print edition so that the first Large Print copy that becomes available
is targeted, rather than forcing the patron to select a particular copy
to hold.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a record with items of two or more itemtypes
4) Place a record level hold on the record while choosing one particular
itemtype
5) Check in an item from the record that is not of that itemtype
6) Notee it is not trapped for the hold
7) Check in an item from the record that does match the selected itemtype
8) Note the item is trapped for the hold
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 12752 has fixed a bug for installations upgrading from 3.14, but has
not fixed the problem for new installations.
Because of some wrong data manipulations, the names for a given letter
code may diverge.
In particular OVERDUE and PREDUE names of phone notices have been
wrongly modify by bug 11867: they have been set to the name of the first HOLD
notice.
Trying to be back on our feet, this update DB entry will try to guess
and set back up the correct name.
To know if your install is affected by this bug, the following SQL query
can help you:
SELECT code, name, message_transport_type
FROM letter
WHERE code="PREDUE" OR code="OVERDUE";
If the names are different for the same code, something went wrong.
Executing this update DB entry should fix the divergence.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Fix the problem, see comment #6 for test.
No koha-qa errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
3.15.00.041 was wrong, the name of the letter should not always been the
name of the first HOLD notice.
PREDUE_PHONE should be updated with the first name of the PREDUE notice,
same for OVERDUE_PHONE and OVERDUE
Signed-off-by: Chris Cormack <chrisc@catalyst.net.z>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
[1] Upload_general_files
This will allow you to access the tools/upload form via the Tools menu.
And it will also allow you to add permanent uploads.
[2] Upload_manage
It will allow you to delete uploads from other users.
Note that anyone may delete his own uploads.
It is not meant to include upload_general_files.
In order to not disturb existing users that now have edit_catalogue and are
using the plugin (read: added at least one record to uploaded_files), we
will add the first permission for them. New users will need to be authorized
in the usual way thereafter.
Note: If you only have one of the other permissions checked in allows_add_by,
e.g. stage_marc_import, you can add temporary uploads, but not permanent
uploads.
Test plan:
We are only testing the dbrev here, not if the perm works as advertised.
[1] Run the dbrev and check that you see the perms with a description on
the Patron/Set permissions page.
[2] If you had records in uploaded_files and a user with edit_catalogue
*only*, verify that this user now also has upload_general_files.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <bredan@bywatersolutions.com>
Bug 16354 introduces a syntax error on updatedatabase.pl
see comment #5 there
To test
1) Check error on update 3.23.00.051
2) Apply the patch
3) run updatedabase again (perhaps changing 051 to XXX)
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
happy again!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
To make things consistent, the attributes of the mappings (sort,
suggestible, facet) should be moved to the join tables
(search_marc_to_field).
Indeed the search_marc_map could represent a mapping for several search
fields with different attributes. Before this change it was not
possible.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch applies several changes to the DB structure introduced by
the previous ES patch set:
1/ Add a search_field.label column
=> It will be easier to understand what the search_field does.
Indeed, some are not user friendly: acqdate, an, pl, ff8-23, ln, etc.
TODO later: Update the labels with correct values (at the moment
label=name)
2/ Update the foreign key search_marc_to_field.search_marc_map_id with
on delete cascase. This will permit to automatically remove the entries
in search_marc_to_field when they are deleted in search_marc_map.
3/ Remove the index_name_2 unique constraint on the search_marc_map table.
I don't understand how this could be useful, it was defined like (index_name,
marc_type, marc_field), so it means a mapping cannot be defined twice with
different values for facet, suggestible and sort.
This limitation does not seem to make sense.
Robin, please correct me if I am wrong :)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
There were rebase conflicts that it was just easier to postpone until
afterwards.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
1/ This patch fixes a major issue on UNIMARC and NORMARC installations
(Compulsive c/p on insert into insert into search_marc_to_field for unimarc and normarc)
2/ After fixing that, I got
invalid marc path at /usr/share/perl5/Catmandu/Fix/marc_map.pm line 35.
on reindexing.
It was caused by some "" values instead of NULL.
3/ Then, a "duplicate entry" error was caused by 3 lines for Local-number.
It seems to be an error, 1 is enough (I suppose 0909 was an error too).
Note that the following is not fixed by this patch:
MariaDB [koha_es_unimarc]> insert into search_field (name, type) select distinct mapping, type from elasticsearch_mapping;
Query OK, 73 rows affected, 57 warnings (0.05 sec)
Records: 73 Duplicates: 0 Warnings: 57
MariaDB [koha_es_unimarc]> show warnings;
+---------+------+--------------------------------------------+
| Level | Code | Message |
+---------+------+--------------------------------------------+
| Warning | 1265 | Data truncated for column 'type' at row 1 |
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This allows sorting to be configured within a field. For example, while
many values are included for search on author, sorting should only be
done on the main entry values. This permits that by have a sort value,
which can be true, false, or null. true and null are pretty much the
same, but false means that a field isn't available for sorting on. By
default (null), fields can be sorted on.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This makes the mapping schema a proper many-to-many relational
structure, which is a little more fiddly to work with, but will make
things like editors for it easier to write.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
(Not fetched yet though.)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This sets up the database changes needed to run ES. This isn't intended
to be ready for upstreaming, just to make testing easier.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some installer files still refer to password_allowed.
The print statement of the db revision has been slightly adjusted.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
When creating a patron attribute type, there is a "Allow password"
checkbox. If checked, the librarian will be able to enter a password for
this patron attribute when editing a patron.
The goal was to allow a patron to log in with a secondary password.
However, this feature has never been implemented.
"""
commit 6fc62bcd32
CommitDate: Mon May 12 09:03:00 2008 -0500
extended patron attributes tables & syspref (DB rev 081)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
"""
To decrease maintainability, this patch suggest to remove the 2 DB fields
borrower_attributes.password and
borrower_attribute_types.password_allowed
If they have not used by the library.
Test plan:
- Edit a patron attribute type and select "allow password"
- Edit a patron and defined a password for this attribute
- Execute the DB entry
- Note that you get a warning
- Empty the password field
- Execute the DB entry
- You do not get the warning and the 2 DB fields have been removed
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Add sysprefs.sql changes for new installations
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1 - Apply patch
2 - run updatedatabase.pl
3 - Add some html to the two new prefs IntranetReportsHomeHTML and
IntranetCirculationHomeHTML
4 - View the reports and circulation homepages and confirm your changes
show
Sponsored by Northeast Kansas Library System, NEKLS (http://nekls.org/)
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Koha's EDIFACT module works great for many European vendors,
but does not work will for US vendors, which have a much different
interpretation of 'standard'. In fact, each vendor may require
different arrangements of values in EDIFACT messages. It would be
impossible to encompass all these requirements within Koha's EDIFACT
module itself. Instead, we should allow the module to be pluggable, so
versions of the module can be developed for vendors that require EDIFACT
messages that don't conform to the standard set by Koha's EDIFACT
module.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable Koha plugins
4) Install the Edifact stub plugin available at
https://github.com/bywatersolutions/koha-plugin-edifact-stub
5) Edit the EDI Vendor account, assign the plugin to a Vendor EDI account
6) Test EDI functionality ( ORDER, INVOICE ), there should be no errors
or changes to the EDIFACT message input or output
Signed-off-by: Jason DeShaw <JDeShaw@cityoffargo.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add support for processing incoming Edifact Quotes, Invoices
and order responses and generating and transmission of
Edifact Orders.
Basic workflow is that an incoming quote generates an aquisition
basket in Koha, with each line corresponding to an order record
The user can then generate an edifact order from this (or another)
basket, which is transferred to the vendor's site
The supplier generates an invoice on despatch and this will
result in corresponding invoices being generated in Koha
The orderlines on the invoice are receipted automatically.
We also support order response messages. This may include
simple order acknowledgements, supplier reports/amendments
on availability. Cancellation messages cause the koha order
to be cancelled, other messages are recorded against the order
Which messages are to be supported/processed is specifiable on a
vendor by vendor basis via the admin screens
You can also specify auto order i.e. to generate orders from quotes
without user intervention - This reflects existing
workflows where most work is done on the suppliers website
then generating a dummy quote
Received messages are stored in the edifact_messages table
and the original can be viewed via the online
Database changes are in installer/data/mysql/atomicchanges/edifact.sql
Note new perl dependencies:
Net::SFTP:Foreign
Text::Unidecode
Signed-off-by: Paul Johnson <p.johnson@staffs.ac.uk>
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test Plan (remains the same):
0) Back up your database
1) Apply all these patches
2) In your mysql client use your Koha database and execute:
> DELETE FROM systempreferences;
> SOURCE ~/kohaclone/installer/data/mysql/sysprefs.sql;
-- Should be no errors.
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see 4 entries.
> QUIT;
3) Restore your database
4) Run ./installer/data/mysql/updatedatabase.pl;
5) In your mysql client use your Koha database and execute:
> SELECT * FROM systempreferences LIKE 'GoogleO%';
-- Should see the same 4 entries.
6) Log into the staff client
7) Home -> Koha administration -> Global system preferences
8) -> OPAC
-- make sure your OPACBaseURL is set (e.g. https://opac.koha.ca)
9) -> Administration
-- There should be a 'Google OAuth2' section with the ability
to set those 4 system preferences.
10) In a new tab, go to https://console.developers.google.com/project
11) Click 'Create Project'
12) Type in a project name that won't freak users out, like your
library name (e.g. South Pole Library).
13) Click the 'Create' button.
14) Click the 'APIs & auth' in the left frame.
15) Click 'Credentials'
16) Click 'Create new Client ID'
17) Select 'Web application' and click 'Configure consent screen'.
18) Select the Email Address.
19) Put it a meaningful string into the Product Name
(e.g. South Pole Library Authentication)
20) Fill in the other fields as desired (or not)
21) Click 'Save'
22) Change the 'AUTHORIZED JAVASCRIPT ORIGINS' to your OPACBaseURL.
(http://library.yourDNS.org)
23) Change the 'AUTHORIZED REDIRECT URIS' to point to the new
googleoauth2 script
(http://library.yourDNS.org/cgi-bin/koha/svc/auth/googleopenidconnect)
24) Click 'Create Client ID'
25) Copy and paste the 'CLIENT ID' into the GoogleOAuth2ClientID
system preference.
26) Copy and paste the 'CLIENT SECRET' into the GoogleOAuth2ClientSecret
system preference.
27) Change the GoogleOpenIDConnect preference to 'Use'.
28) Click 'Save all Administration preferences'
29) In the OPAC, click 'Log in to your account'.
-- You should get a confirmation request, if you are
already logged in, OR a login screen if you are not.
-- You need to have the primary email address set to one
authenticated by Google in order to log in.
30) Run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The default value for sysprefs should not be NULL but an empty string.
When a pref is cleared, it's set to an empty string, so it does not make
sense to create it with an undefined value.
The main purpose of this patch is to remove the warning in logs when a
pref is accessed for the first time and the cache is not yet populated.
It also ensures that the behavior will be the same for the first access
and the others.
Test plan:
SELECT COUNT(*) FROM systempreferences WHERE value IS NULL;
Should not return any results after the update DB entry executed.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The items.new column is badly named, the Koha::Item->new accessor will
never returns this value, but the constructor will be called instead.
This patch renames it with new_status to avoid the ambiguity.
Test plan:
0/ Do not apply this patch
1/ Define some rules in the "Automatic item modifications by age" tool
with at least one items.new field used
2/ Apply this patch
3/ Execute the update DB entry
4/ Reload the tool page and confirm that the changes have been taken
into account
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
