This reverts commit ca0e7541ec.
It was part of a patch set that removed actively used data and must be
therefore reverted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents the cancellations we were seeing. Transfers were
being created pre-emtively for reserves in branchtransfers before the
librarian had selected their prefered action. As such, we were getting
double lines in the branchtransfers table.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was an existing call to $self->activethemes that behave as setter:
85 $self->activethemes($activethemes);
I am not sure what are the side-effects but it does not look good.
It caused warning in the logs:
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 279.
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 280.
Use of uninitialized value $interface in string eq at /kohadevbox/koha/C4/Templates.pm line 282.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296.
Use of uninitialized value $lang in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 296
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix test
t/db_dependent/Auth_with_ldap.t .. 1/4
# Failed test 'use C4::Auth_with_ldap;'
# at t/db_dependent/Auth_with_ldap.t line 123.
# Tried to use 'C4::Auth_with_ldap'.
# Error: No ldapserver "id="ldapserver"" defined in KOHA_CONF: /etc/koha/sites/kohadev/koha-conf.xml at /kohadevbox/koha/C4/Auth_with_ldap.pm line 55.
# Compilation failed in require at t/db_dependent/Auth_with_ldap.t line 123.
# BEGIN failed--compilation aborted at t/db_dependent/Auth_with_ldap.t line 123.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 28278 removed usage of XML::Simple which had side-affect that
C4::Context->config("ldapserver") returns one more level of hash
based on id of element, so ldap configuration was no longer
available generating error in log:
No ldapserver "hostname" defined in KOHA_CONF: /etc/koha/sites/srvgit/koha-conf.xml
which is very confusing since hostname is there, but we are looking
at wrong place for it.
== Test plan ==
1. Setup an LDAP server with users or use a public one
See https://wiki.koha-community.org/wiki/Ldap_testing
2. Configure Koha to use it, see example config above
3. Go to OPAC
4. Koha doesn't compile due to LDAP config not parsed correctly
5. Apply the patch
6. Koha compiles and page loads
7. Log in successfully with one of the LDAP users
8. Bonus: Try to log-in with a wrong username & a good password and
vice-versa
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This was causing extra warnings when the permanent_location field was
unmapped.
We only need to check if there is a field defined as you can define a mapping
without both a field and subfield, so the existence of one implies the other
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By always passing permenent location from the items editor, we can know
if permanent location was defined in the framework. This means we can
know if we should update permanent location independently of location
even if permenent location has an empty value.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If permanent location is mapped, it will exist in the MARC.
However, when we are transforming our item hash to MARC,
we are losing our permanent location mapping, at least in unit tests.
By checking the original MARC for the permenent location, we remove the
risk of losing it the "empty" permenent location through the
transformation process. We only need to know that it existed in the
original item marc to know we need to update it in the database.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We remove YAML::Syck on bug 22824 and YAML on 27673, to use YAML::XS.
However we need one of them for CGI::Session::Serialize::yaml
It's preferable to change the serializer and use the default one instead
of writing one based on YAML::XS (or patch the existing ::yaml that does
not seem maintained).
There was an encoding bug reported on the default serializer (see commit
a858e8a8b8) but we fail to recreate it.
Test plan:
Create 3 libraries with branchcode=branchname: "CPL", "ÄÄÄ~ÄãÃ" and "✔️❤️ ★"
Use the 3 options of SessionStorage and switch from one logged in
library to another.
Confirm that everything is working correctly (ie. no ending issue in the
library name at the top-right corner)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4/Auth_with_shibboleth.pm has:
if ( any { /(^psgi\.|^plack\.)/i } keys %ENV )
When others have:
if ( any { /(^psgi\.|^plack\.)/i } keys %ENV )
This has been highlighted by https://gitlab.com/koha-community/koha-testing-docker/-/issues/249 that introduces a PLACK_WORKERS env vars, and t/Auth_with_shibboleth.t was failing with
# Failed test 'checkpw_shib tests'
# at t/Auth_with_shibboleth.t line 335.
Invalid parameter passed, categorycode= does not exist# Looks like your test exited with 255 just after 5.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We don't need a See Also reference to XML::Simple in the C4::Context,
especially since Bug 28278 replaced the parsing of koha-conf.xml
with XML::LibXML.
Test plan:
1. Apply patch
2. perldoc C4/Context.pm
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a lookup of the sip user during an SC status, confirming that
our DB ocnnection is working, and that our user is still valid
Additionally, it adds support for SC status to the sip_cli_emulator and adds basic
test coverage for the SC status message
To test:
1 - Apply patch
2 - Restart SP server
3 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -m sc_status_request -su term1 -sp term1
4 - prove -v t/db_dependent/SIP/Message.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 10584 made Koha hide biblios for which all items match some criteria (in OpacHiddenItems) so they are hidden.
Add syspref OpacHiddenItemsHidesRecord controlling this behaviour.
Test plan :
1)
1.1) Create some biblio records with one item having damaged=1
1.2) Define system preference OpacHiddenItems = damaged: 1
2)
2.1) Set system preference OpacHiddenItemsHidesRecord to 'don't hide'
2.2) At OPAC : perform a search showing those records and some more
2.3) Check you see the all the records
2.4) For a record with hidden item check you don't get HTTP 404 for : normal view, ISBD view, MARC view
2.5) Check you can had tags on this record
2.6) Add record to basket, check you see it in basket
3)
3.1) Set system preference OpacHiddenItemsHidesRecord to 'hide'
3.2) At OPAC : perform a search showing those records and some more
3.3) Check you don't see the records with hidden item
3.4) For a record with hidden item check you get HTTP 404 for : normal view, ISBD view, MARC view
3.5) Show basket, check you see the records with hidden item
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We have a test in C4/XSLT/transformMARCXML4HTML which is meant to exclude the 942n, however,
it doesn't work because it checks the $subfield parameter against n
$subfield is an arrayref with the code and value as members
we need to check $subfield->[0]
To test:
1 - Apply only unit tests
2 - prove -v t/db_dependent/XSLT.t
3 - It fails
4 - Confirm 952$n in default framework is tied ot authorised value 'YES_NO' or do so
5 - Set OpacSuppression to 'Hide'
6 - Edit a record in the default template, changing 942$n to 'Yes
7 - Confirm the record is suppressed in opac
8 - Note there is no suppression notice in the record in staff client
9 - Apply second patch
10 - Reload and confirm staff side shows suppression notice
11 - Confirm record still suppressed in OPAC
12 - Edit record, set 942$n to 'no'
13 - Confirm there is no suppression notice in staff client
14 - Confirm you can view the record in OPAC
15 - prove -v t/db_dependent/XSLT.t
16 - Tests pass!
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is code in populate_order_with_prices that is intended to use ecost over unitprice,
it just doens't seem to be working.
Making it more explicit seems to take care of the issue.
To test:
1 - Create a basket
2 - Add an order line, don't set 'Actual cost: ', but use vendor price
and a discount.
3 - Save
4 - Display all columns, 'Actual cost tax inc.' are GST columns aren't set.
5 - Apply batch
6 - Redo 1,2, 3
7 - Display all columns, GST is calculated correctly, unitprice remains 0.
Signed-off-by: Marjorie <marjorie.barry-vila@collecto.ca>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With the re-introduction of 'AQUISITIONS' as a logging module in Koha,
it makes sence to move the ORDER notice logging back into that module
whilst leaving the other 'CLAIMS' notices under their own logging module
code.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 14570 added a borrower_relationships table but it didn't remove the relationship column from the following tables:
- deletedborrowers
- borrowers
- borrower_modifications
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
memcached address and namespace are in $KOHA_CONF, so it is required to
read it before being able to access the cache. And after that,
configuration is kept in memory forever. Storing this in memcached is
useless and even counter-productive, since Koha reads both the file and
the cache
This patch addresses this issue by removing the cache-related code from
C4::Context->new.
It means that C4::Context->new will always read the configuration file,
so this patch also replaces inappropriate calls to
C4::Context->new->config by appropriate calls to C4::Context->config
It also fixes a bug where C4::Context->new would ignore the filepath
given in parameters if there was something in cache.
It also removes a problematic call to Koha::Caches->get_instance.
Because this call was outside of any subroutine, it would have happened
before the initialization of $C4::Context::context (which happen in
C4::Context::import)
Test plan:
1. Do not apply the patch yet
2. Add the following line at the beginning of Koha::Config::read_from_file
warn "read_from_file($file)";
This will allow you to check how many times the file is read.
3. Flush memcached and restart starman
4. Check the logs, you should see "read_from_file" a bunch of times
5. Apply the patch
6. Re-add the line from step 2
7. Flush memcached and restart starman
8. Check the logs, you should see "read_from_file" only once
9. Make sure the memcached config from $KOHA_CONF (memcached_servers,
memcached_namespace) is taken into account by checking the About page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The YAML::XS::Load and YAML::XS::LoadFile functions already decode the
YAML to Perl objects/strings, therefore decoding the output yet
another time is not needed and causes an error to happen.
To test:
1. Go through the following steps and notice without this patch the
error happens and with this patch it doesn't:
$ koha-mysql kohadev < installer/data/mysql/kohastructure.sql
$ restart_all
$ ./translate update pl-PL
$ ./translate install pl-PL
$ restart_all
--> Go to the Koha web installer page and select pl-PL as the installer
language, click through it and notice it gives following error at the
MARC21 step:
Cannot decode string with wide characters at /usr/lib/x86_64-linux-gnu/perl/5.24/Encode.pm line 202
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Letters.t tests failed since time_queued didn't
include timecode. Use DATETIME when inserting
into message_queue.
To test prove t/db_dependent/Letters.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds error codes for delivery notes and replaces English
strings with them in template.
To test confirm everything works as intended.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Delivery notes weren't translatable. This patch adds
them in notices.tt. If note is Mail::Sendmail error generic
'Error occured while sending email' is shown.
Also fixes MySQLisms and adds AFTER to atomicupdate file.
To test prove t/db_dependent/Letters.t
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds additional delivery notes to messages in message queue as there
can be multiple reasons for a delivery to fail.
Currently in message_queue we are given only two delivery statuses for messages,
"sent" and "failed". When the status becomes failed, we have no idea why it fails.
This feature can be useful with SMS gateway providers. Many SMS gateways inform
the application the reason of SMS delivery failure. With this feature, this
information can now be stored. As well as for emails, instead of simply logging
failures, we can now store the reason of failure directly into the message row
of message_queue.
Test plan:
1. Enable EnhancedMessagingPreferences syspref
2. Find a borrower with notices at members/notices.pl
3. Observe that there is no column for Delivery notes
4. Apply patch and run the given database update
5. Repeat step 1.
6. Observe that there is now a column for Delivery notes
Sponsored-by: Hypernova Oy
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If BiblioAddsAuthorities and AutoCreateAuthorities are enabled, a new record is auto linked when saving and authorities generated with a 670 field that indicates which record generated the new authority.
The code to do this is called before the biblionumber is generated, so the variable that adds the biblionumber to the citation is empty
This patch moves the linking code to after the biblionumber is generated
To recreate:
1 - Enable BiblioAddsAuthorities and AutoCreateAuthorities
2 - Import or create a new record
3 - Ensure the record has controlled fields that do not have authorities before saving, i.e.:
Add a 650 with "test_bug_27577_01"
4 - Search for the authority record
5 - Note the 670 field does not contain the biblionumber
6 - Apply patch, restart all the things
7 - Repeat 2-4
8 - Note the 670 now has the biblionumber
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We don't longer enter the HTTP_USER_AGENT conditional in the BEGIN block
of C4::Context. It was used when apache only was used.
I am suggesting to remove it but keep the $CGI::VERSION < 4.08 condition
to keep support of all version (not sure it's needed but won't hurt).
I have not found a lot of occurrences of KOHA_BACKTRACES and I am
assuming not much people are using it, we should prefer the dev_install
flag instead (to set environment="development" when plack is started and
enabled the starman trace)
Test plan:
Regression test what you think is useful
Confirm the above statements
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This simply adds a JOIN to the collections table - if the collection is gone
then the item is not considered to be in a rotating collection
Also remove variable to store the return that is not used later
To test:
Create a rotating collection
Add an item
Delete the rotating collection
View the db (SELECT * FROM collections_tracking;)
The item is still in the collection
Enable AutomaticItemReturn
Checkin the item at a branch not its home
The item does not get transferred home
Apply patch
Restart all the things
Check in the item, it is transferred home
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that a librarian can edit the biblionumber for a given subscription, however, when receiving serials the biblionumber is pulled from the existing serials, so all new received issues are received on the old biblionumber.
This is problematic in light of bug 21901 - you can change the biblionumber, the serials still point to the old biblionumber - and deleting the biblio deletes the serials. Additionally, the update will delete serials where this was the case
Test plan:
1 - Create a new subscription
2 - Receive an issue
3 - Edit the subscription and change the biblionumber
4 - Receive another issue
5 - SELECT biblionumber FROM serial
=> the biblionumber link must have been updated
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When loading C4::Message->{metadata} we load it as perl string in all
other cases, see e.g. the subroutine find_last_message(). In this one
case we incorrectly populate the C4::Message->{metadata} as an UTF-8
octet instead of a Perl string. This causes a problem later on because
encode_utf8 later on in the line:
YAML::XS::Load(Encode::encode_utf8($self->{metadata}));
excepts a perl string and not a UTF-8 octet (please refer to the
functions perldoc). This breaks the encoding and causes an internal
server error:
To test the error is gone:
1. Create biblio with "AE" (bugzilla doesn't let me write the real
letter here, see it in the bugzilla comments) in title
2. Enable RenewalSendNotice
3. Enable "Item checkout and renewal" message preference for patron
4. Checkout an item from biblio "AE" to patron
5. Try to renew the patron's loan and notice the renewal fails
6. Apply patch and restart plack
7. Notice renewal works now and message h's the AE letter displayed correctly
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates C4::Letters to allow use of existing koha template
includes from notices, then updates the printfeercpt and printinvoice
slip print option to use GetPreparedLetter rather than calling getletter
directly.
As part of this work, we also add credits and debits handling to the
_parseletter_sth and _get_tt_params routines in C4::Letters to allow for
recognisable variable names in the notice template.
Test plan
1/ Update the ACCOUNT_CREDIT and ACCOUNT_DEBIT notices to use
'accounts.inc' include for account descriptions
1a/ Add `[% PROCESS 'accounts.inc' %]` to the top of the notice
1b/ Replace manual account descriptions with `[% PROCESS
account_type_description account=credit %]`
2/ Print one of each slip and check that descriptions are properly
substituted
3/ Clone the notice to another language
4/ Print the in the other language and note the translated descriptions
are properly substituted.
5/ Signoff
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Historical OVERDUE fines may not have an issue_id - this causes
flooding of the logs when calling update fine
Trivial change, reading the code should be enough, but test plan below
To test:
1 - Create some fines without an issue_id
- Either checkout an old version of Koha and add manually or
- Checkout some items (backdated) to a patron, run fines.pl then
UPDATE accountlines SET issue_id = NULL;
2 - Checkout a backdated item with fines in the circ rule to the same patron
3 - Run fines.pl
4 - Note the errors
5 - Apply patch
6 - Repeat and note no errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the skip_record_index optional parameter for
LostItem and passes it through to MarkIssueReturned as required.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With bug 27281 we removed a call to reset an items holdingbranch back to
the 'frombranch' of the transfer. This is correct, as with bug 23129
(and friends) we ensure that the holdingbranch was not changed at
transfer request time and instead would only be updated at the reciept
of transfer. As such, it's safe to remove the update here as it would be
just setting the same branch as is already present.
However, when removing this ModItem call, I neglected to realise that
also remoes the requirement for passing around the defered indexing bit
as we no longer need to trigger a re-index as there's not any change to
the item.
This patch therefore cleans up the POD for LostItem, removes the no
longer references 'params' parameter and drops the corresponding index
test.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the last mentions of DeleteTransfer
Test plan
1/ Grep the codebase for DeleteTransfer
2/ It should no longer exist
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 27896: (QA follow-up) Fix number of unit tests
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates C4::Circulation::LostItem to use the Koha::Item and
Koha::Item::Transfer methods to cancel transfers when an item is marked
as lost.
Test plan
1/ Confirm t/db_dependant/Circulation.t passes prior to applying the
patches
2/ Apply the patch and run updatedatabase.pl
3/ Confirm that t/db_dependant/Circulation.t still passes
4/ Signoff
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested by Tomás and Jonathan, we now log the entire basket object
when logging an action.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds additional basket logging as discussed in comment #14
- Basket reopening
- Basket users (manager) modification
- Basket header modification
Signed-off-by: Holly <hc@interleaf.ie>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In response to Séverine observations in comment #10, this patch removes
the duplicate logging of the borrowernumber
https://bugs.koha-community.org/show_bug.cgi?id=23971
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds logging for the following Acq actions:
- Basket creation
- Basket editing
- Basket approval (via EDI)
- Basket closure
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23971: (QA follow-up) New DBrev syntax
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If isurl is set to undef in the DB, it will be exported as an empty
string, which is an invalid value for isurl (int)
Incorrect integer value: '' for column 'isurl'
Test plan:
Export framework structure in CSV and ODS, then reimport it and check that
all the subfields are important correctly
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As shipping costs are created when an invoice is created, and creation
of an invoice implies that items have been received, the shipment costs
are always assumed to be 'spent'
This logic is true in GetBudgetSpent/GetBudgetOrdered, however, GetBudgetHierarchy
treats open invoices shipping costs as 'ordered' and closed invoice shipping costs
as 'spent'
This leads to inconsistencies in acqui-home vs spent.pl and ordered.pl
To test:
1 - Find a vendor
2 - Click 'Receive shipments'
3 - Create a new invoice with a shipping cost on budget A
4 - Repeate and create a new invoice with a shipping cost on budget B
5 - Close the second invoice
6 - View acquisitions ome
7 - Note budget A includes the shipping under ordered
8 - Note budget B includes the shipping under spent
9 - Click the 'ordered' column on budget A - no shipping is listed on ordered page
10 - Click the spent column on budget A - the shipping is listed here
11 - Apply patch
12 - Both budgets list the shipping as 'spent'
13 - Both 'spent' pages include the shipping
14 - Neither 'ordered' page includes shipping
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters C4/Reserves.pm to pass back 'noReservesAllowed' when
allowedreserves=0. This allows passing to the user an appropriate
message about the availability of items for holds
This patch also fixes a FIXME about using effective_itemtype to fetch item rules
To test:
1 - Set one itemtype to allow no holds
2 - Set 'Holds per record' to 0 for another itemtype/patron combination
3 - Create or find 2 records, each with items only of the itemtypes above
3 - Attempt to place a hold for a patron on each record above
4 - The message will be 'Too many holds'
5 - Apply patch and repeat
6 - Message should be "Cannot place hold: no item are available to be placed on hold"
7 - Try placing a multihold with either record above and a holdable record,
message should end "Cannot place hold on some items'
8 - prove -v t/db_dependent/Holds.t
Rebase - Fix test expectation
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes all places in Koha that rely on OpacHiddenItems
actually use C4::Context->yaml_preference instead of manually calling
the YAML libraries and handling it.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Items* \
t/db_dependent/Koha/Item* \
t/db_dependent/Koha/Filter/EmbedItems.t
=> SUCCESS: Tests pass!
3. Try hiding things with opac-ISBDdetail.pl and opac-search.pl
=> SUCCESS: Things work the same!
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
