The update DB entry will not remove the prefs if NorwegianPatronDBEnable
is set.
This patch could be reverted locally by people using it.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Must be |$raw, not |raw
Error:
Template process failed: undef error - raw: filter not found at
/home/vagrant/kohaclone/C4/Templates.pm line 122
To recreate:
Add a new restriction and visit circulation.pl?borrowernumber=42
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In the staff client, when viewing the content of a list, it can be sorted by 'title', 'author' or 'call number' but not by 'date added'.
This patch adds 'date added' as an option for default sorting of lists. It also makes it available as a sorting option while viewing lists.
Test plan:
In the staff client and the opac:
1) View a list containing several items
=> Notice that you can't sort by 'date added'
2) Try to edit the list or create a new one
=> Notice you can't choose date added as the default sort order
3) Apply the patch
4) When viewing the list you should now be able to sort by date added
=> Make sure it orders correctly
5) Edit or create a list and choose date added as default sorting order
=> Make sure it uses date added as default
=> On the staff client: test that the filter for 'sort by' works for date added
=> On the opac: test that, while viewing the contents, choosing 'default sorting' in the dropdown menu sorts correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In the staff client, when viewing the content of a list, it can be sorted by 'title', 'author' or 'call number' but not by 'date added'.
Test plan:
1) In the staff client, view a list containing several items
2) Notice that you can't sort by 'date added'
3) Apply the patch
4) Repeat step 1
5) The list can now be sorted by 'date added'
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Make sure the HouseboundModule is enabled in system preferences
2) Go to a patron file
3) Next to Housebound roles, click on "Add"
4) Check "Yes" next to one of the two roles (or both)
5) Click "Save"
6) The "Add" button is now "Edit", click on it
The page is the one to edit housebound roles.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Remove useless 'action' attribute in forms
- $op should never be equal to 'reset', so remove the test
- Move 'op' parameter inside <button>s to avoid having different HTML
tags for elements that have the same kind of behaviour
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Mappings UI now has button that allows one to reset the mappings.
2) Mappings UI displays the items in alphabetical order.
3) Indexing script drops and recreates the index right away, which
helps prevent ES from autocreating a bad index if someone does something
while the first batch of records is being processed.
4) Indexing script has nicer output.
To test:
1) Change mappings.yaml file
2) Reset mappings in UI in mappings.pl
3) Verify the mappings have been changed in UI
4) The field order is alphabetical
5) Rebuild script has clean output
6) Run test t/db_dependent/Koha_Elasticsearch_Indexer.t
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This makes the collection visible in the checkouts table
on the details and issues tab in the patron account in staff.
TEST:
1. Check out a few items to patron.
2. View check outs on patron account in staff client.
3. Collection code is not present.
4. Apply patch
5. Notice that not Collection code is visible while viewing check outs.
Signed-off-by: Severine QUEUNE <severine.queune@bulac.fr>
Signed-off by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Create a staff patron with catalogue,borrowers,and view_system_logs
permissions
2 - Log in using that patron
3 - Go to tools
4 - Click 'Log viewer'
5 - You get a blank page
6 - View borrower circ screen, note you do not see 'Modification log'
7 - Edit a borrower, note you do not see 'Modification log'
8 - Apply patch
9 - 'Log Viewer' should now load correctly
10 - You should see 'Modification log' tab during circ
11 - You should see 'Modification log' tab when editing patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Go to Admin->Z39/SRU servers
2 - Pick a server or add one
3 - Click 'Modify' button for mappings
4 - Copy the HTML of the popup into w3c validator
https://validator.w3.org/#validate_by_input
5 - Note extra closing div
6 - Apply patch
7 - Repeat
8 - Success
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects a regression caused by Bug 21151: The include file
which adds CSS to the page was removed from the template.
To test, apply the patch and go to Administration -> Z39.50/SRU servers
-> New SRU server.
- Click the "Modify" button next to "SRU Search fields mapping"
- Verify that the pop-up window is correctly styled.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To stay consistent in the DOM structure it would make sense to have it
there as well
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
While the module pull down on adding and editing a letter is
written out and fully translatable, the overview page showed
the internal 'module code'.
Patch also renames the "Members" module into the "Patrons" module
to match Koha's terminology.
To test:
- Before applying the patch:
- Add or edit a notice, look at the pull down for module
- Go back to the overview page
- Verify the module names don't match
- Apply the patch:
- Check again, pull downs should now match
- Verify that Members is now Patrons everywhere
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Have the same fund code in two budgets
2 - Have budget code defined in MarcItemFieldsToOrder
3 - Stage a file with some order items as defined above
4 - Inspect the fuinds drop down in the item, notice two lines are
marked selected
5 - Apply patch
6 - Repeat
7 - Only one field should be selected, with a preference for active
budget
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
IntranetUserJS was missing (?!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We want to encode HTML characters for the "key => value"'s
like branchcode => branchname
But not the whole JSON string
We could have done it controller-side but it sounds better to do it as
we do for other places
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is definitely wrong, html is generated in C4/Creators/Lib.pm (see
FIXME).
We will need to fix it, but let's do that later!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We will have to make sure this filter (HtmlTags) is not used with
unsafe variables.
Generated by:
perl -p -i -e 's/HtmlTags tag([^\|]*)\| html -%]/HtmlTags tag\1-%]/g' **/*.tt **/*.inc
perl -p -i -e 's/HtmlTags tag([^\|]*)\| html %]/HtmlTags tag\1%]/g' **/*.tt **/*.inc
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The step to install optional/mandatory things is broken with
many <br />'s instead of line breaks.
TEST PLAN
---------
1) Back up database
2) Drop database
3) Create empty database
4) Run web installer
-- Notice that step 3 has ugly <br />'s at the last
part of step 3.
5) Apply patch
6) Repeat steps 2-4
-- Notice the <br />'s are now nice line breaks.
NOTE: No promises of perfect positioning!
7) Run koha qa test tools.
Joubu: I have no idea if this is still needed. TO TEST
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=13618
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
OCLC has decided to retire all xISBN services:
https://www.oclc.org/developer/news/2018/xid-decommission.en.html
The code for related features has to be removed from Koha.
Test plan:
You need to be familiar with the different sysprefs (I am not):
- FRBRizeEditions
- SyndeticsEnabled
- SyndeticsEditions
- ThingISBN
Make sure there are no regressions introduced by this patchset.
QA Note: C4/XISBN.pm should be renammed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Since bug 20226 you cannot longer creation a patron, memberentry.pl will
explode with
Template process failed: undef error - DBIC result _type isn't of the
_type Category at /home/vagrant/kohaclone/koha-tmpl/intranet-tmpl/prog/en/includes/str/members-menu.inc
line 22.
The problem is that "patron" is actually defined and the test in
str/members-menu.inc does not work as expected.
It comes from
commit 7b1d08df0f
Bug 19936: Replace Generate_Userid - Update the occurrences
where I needed $patron to be defined in order to use Koha::Patron->generate_userid
on an blessed object.
But this was actually wrong, as it could have side-effects.
Test plan:
Create a new patron
Edit it
Retest bug 19936 and make sure the userid is generated correctly in the
different situations
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch reindents the template for the staff client cart, basket.tt
- Trailing spaces removed
- Indentation changed to a consistent 4 spaces
- Markup indentation made more consistent
To test, apply the patch and add multiple items to the cart in the staff
client.
View the cart and confirm that it looks as it should both in the "brief"
and "more details" views.
HTML validation before and after the patch should return the same
results.
Signed-off-by: DEVINIM <kohadevinim@devinim.com.tr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set does several things:
- it removes USER_INFO and BORROWER_INFO
These 2 variables contained logged-in patron's info. They must be
accessed from logged_in_user
- Use patron-title.inc for the breadcrumb at the OPAC, for consistencies
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Libraries may want to hide personal patron data from the circulation
page for privacy reasons this syspref introduces that ability for
library staff to control the display of this data themselves without
having to ask support vendors to hide it for them.
Test plan:
1. View circulation page and input a patrons barcode or name
2. Notice if the patron has a phone number, email, street address and
city set then these are displayed in the left hand side of the screen
under the patrons name. Otherwise if all/any of these fields are not
set for the patron then the text: "No <datafield> stored." is
displayed.
3. Apply this patch
4. Run ./updatedatabase.pl from the Koha shell to run the atomicupdate
5. Restart memcached and plack
6. Notice a new systempreference named
'HidePersonalPatronDetailOnCirculation' has been added, which has the
default value 'Dont'
7. Without changing the default value notice the personal patron
information is still displayed on the circulation page
8. Change the value of the syspref to 'Do' and now notice the phone
number, email address, street address and city are now hidden in the
circulation page
Sponsored-By: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Code and variables to deal with the update child feature are not
centralized but copied/pasted in several scripts. Which leads to issues
obsviously (bug 20805 for instance).
Moreover the strings used by the templates are also in several template
files (or .inc)
To deal with that this patch introduces the idea to create 1 .inc file
per .js file
Here we have members-menu.inc for members-menu.js
Test plan:
- Remove all your adult categories (categories.category_type='A')
- Create a patron with a child category
- Try to update to adult category
=> The entry does no longer appears! (This is a change in the behaviour)
- Create one adult category
- Update to adult category
=> There is a JS confirmation message, if you accept the patron will
be updated to the adult category
- Create (at least) another adult category
- Create another child
- Update to adult category
=> No more confirmation message but a popup to select the adult category
- Pick one
=> The patron has been updated to the adult category
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes some unnecessary " "'s from the template for
creating a new basket in acquisitions. This fixes the alignment on the
form fields.
To test, apply the patch and go to Acquisitions -> Vendor -> New basket.
All the form fields should be correctly left-aligned with each other.
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects the title tag on the tags review page.
To test, apply the patch and go to Tools -> Tags. The page title
(probably shown in the browser tab) should start with "Koha ->" instead
of "Home ->".
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When creating a housebound visit, the names of the chooser and deliverer are the
same as the housebound patron (even though the housebound patron does not have
chooser and deliverer roles).
It has been caused by:
commit 5f80977875
Bug 18403: Use patron-title.inc when hidepatronname is used
patron-title.inc now starts looking for a variable named "patron", which exists in
members/housebound.
A better fix could be to renamed this "patron" variable tested by
patron-title.inc, but at first glance it's the only place this issue
exists.
Test plan:
1- Make sure HouseboundModule is enabled in system preferences
2- Go to a patron file (Patron A)
3- Edit this patron's housebound roles to Chooser
4- Go to another patron file (Patron B)
5- Edit this patron's housebound roles to Deliverer
6- Go to a third patron's file (Patron C)
7- Go to the Housebound tab
8- Fill out the housebound profile for Patron c
9- Click on "Add a new delivery"
10- Fill out day and time
11- Check the Chooser drop down
12- Check the Deliverer drop down
13- Save the delivery
14- Notice the Chooser and Deliverer names are correct
15- Click on the name of the Chooser, it goes to Patron A's file
16- Go back and click on the name of the Deliverer, it goes to Patron B's file
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No test plan found ;)
But tested bookcount and request-article.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This alternate patch adds a new icon to the sprite image which gives
icons to the link on the staff client home page. It modifies the CSS
positioning for all the links as the new image sprite is somewhat
different.
The SVG file from which the sprite image was generated is also updated,
and the about page has been updated to give credit to the creator of the
icon.
Unrelated change: The cataloging link is moved to the second column.
Although it's probably rare for all modules to be enabled and available,
this puts the same number of links in each column.
To test, apply the patch and clear your browser cache if necessary. With
interlibrary loan enabled, view the staff client home page and confirm
that all the module links look correct, including when you hover your
mouse over them.
Confirm that the about page lists the new icon under the "licenses" tab.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1 - View the accounts tab for a patron with fines
2 - Note there is no homebranch displayed to see where charges came from
3 - Apply patch
4 - Reload the page and note that you see the 'Home library' column
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The error codes 1 to 7 are used in Uploader.pm or tools/upload.pl.
It would be nice to use alphanumeric codes instead.
No behavior change expected.
Test plan:
[1] Run t/db_dependent/Upload.t
[2] Verify that a regular upload with tools/upload.pl still works.
[3] Rename upload_path in your koha-conf.xml. Restart Plack, flush the cache
and try to upload to a category. Correct error message?
[4] Upload the same file twice to the same category.
Correct error message the second time?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19633: (QA follow-up) Really remove these ugly numbers
See BZ comment5. We now remove the numbers also from the constant names.
Test plan:
Read the changes.
Git grep "ERRCODE_"
Run t/db_dependent/Upload.t (Note: You may see one failure here; it is fixed
on bug 20727. So depends on who reaches master first.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This only pertains to the second (Processing) tab.
Test plan:
[1] Have one entry in Pending and zero in Processing.
[2] Click on Processing tab.
[3] Without this patch, you would see Select all/Clear all.
With this patch, you won't.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The repeated prompts for cancelling multiple selected items are
confusing.
The wording is slightly adjusted. The reason is asked only once per
group of selected items.
Test plan:
Create three requests.
Select two requests and cancel (from top menu) for reason A.
Cancel third request (from item menu) for reason B.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a couple of minor interface changes and updates the way
checkbox change events are handled:
- jQueryUI tabs initialization sets a variable for "active table" which
can be re-used by functions which affect only the visible table.
- The batch "Actions" menu is shown or hidden based on whether there
are checked items.
- The item selection tools are shown or hidden based on whether there
are rows in the table.
To test, apply the patch and test various article request actions:
- Single "process," "complete," and "cancel" operations.
- Select all/ clear all operations on both tabs.
- Batch operations with checked requests.
- Process all pending requests to confirm the selection controls for
that table are hidden.
- Complete all processing requests to confirm the selection controls
for that table are hidden.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adds a column with a checkbox. Adds buttons under the table for Select,
Clear and Actions menu.
An additional javascript function HandleMulti is placed between the form
and the functions handling individual requests.
Note: The Actions menu below does not contain Print slip. This does not
work in its current form. This could be handled on a separate report.
Test plan:
[1] Enable Article Requests. Add a few requests.
[2] Test the Select all / Clear all functionality on the form.
[3] Verify that the menu options Process, Complete and Cancel work as
expected both from the individual Actions menu as from the shared
Actions menu for selected requests.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Patch applies and functions as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes style and markup changes to the patron detail page
template in order to make the display of information somewhat more
compact and to increase the visibility of the edit controls.
To test you should enable the patronimages system preference. Apply the
patch and view the detail page for a patron.
- Check that the page looks correct and that sections like "Alternate
address" and "Alternative contact" are empty when there is no data.
- Check that the "Manage patron image" tool works correctly.
Signed-off-by: Cab Vinton <director@plaistowlibrary.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a more obvious way of see which search terms have been
submitted to filter the table of saved reports.
The patch also moves embedded CSS into a separate file.
To test you should have multiple saved reports.
- Apply the patch and go to Reports -> Use saved.
- Filter the table of reports by submitting one or more terms in the
sidebar "Filter" form.
- Confirm that the terms you submit are shown at the top of the table of
results.
- Confirm that clicking the "Clear" link clears the search filter.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the patron edit process so that "Housebound roles"
can be edited as a separate step.
To test, apply the patch and open an existing patron's detail page
(moremember.tt). Test the "edit" links for 'Housebound roles' and
'Additional attributes and identifiers' and confirm that each opens its
own edit page, and saving changes works correctly.
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The itemnumber list passed from a file in the batch item
modification/deletion tools is not tested.
Like barcodes we should make sure they refer to a valid items in the DB.
Test plan:
- Create a file with barcodes, itemnumbers and random lines
- Use the batch item modification and deletion tools with this file
You should see a table with a list of invalid barcodes and itemnumbers.
Without this patch you got the following error:
Can't call method "title" on an undefined value at
/home/vagrant/kohaclone/tools/batchMod.pl line 580
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
calendar.inc must be in the jsinclude block when jsfooter is set
Test plan:
- Open or create a label batch.
- Click "Add items" to trigger the pop-up search window.
- Date picker should work now
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When a suggestion's status is set to a customized value (AV
SUGGEST_STATUS), the description is not always displayed correctly.
Test plan:
- Create different values for the AV SUGGEST_STATUS
- Create several suggestions
- Change the status using the SUGGEST_STATUS values
- Edit the suggestion and change again the status
- View the suggestions for a given patron
(members/purchase-suggestions.pl?borrowernumber=XX), the statuses must
displayed correctly
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the JavaScript functions for the select all/clear
all links so that each action triggers the "change" event, required to
enable or disabled the "merge selected patrons" button.
To test, apply the patch and perform a patron search which will return
multiple results.
- Test the "select all" and "clear all" links, and confirm that the
"Merge selected patrons" button is enabled and disabled.
- Test that checking and unchecking multiple checkboxes still works
correctly to enable and disable the button.
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The SRU search fields mapping pop-up comes up as a blank white
page.
To test:
- Go to Administration > Z39.50/SRU servers
- Modify or create an SRU server
- Click on the 'Modify' button to change mappings
- Verify the new window that opens is blank
- Apply patch
- Verify the pop-up now is no longer blank but works
correctly.
Bonus: Spottd some HTML errors while looking for the
problem. Also fixed in the patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 19608 incorrectly replaced intranet-bottom by popup-bottom.
Adjusting the new template in the same way.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Apply the patch
- Add an SRU authority server in admininistration -> Z39.50/SRU servers
You can try with the French national library, configured as such:
Hostname: catalogue.bnf.fr
Port: 80
Database: api/SRU
Syntax: Unimarc
Record type: authority
Additional SRU options: version=1.2,sru=get
SRU Search fields mapping example:
Keyword (any): aut.anywhere
Name (any): aut.anywhere
Author (any): (aut.type any "pep org") and aut.accesspoint
Author (personal): aut.type=pep and aut.accesspoint
Author (corporate): aut.type=org and aut.accesspoint
Author (meeting/conference): aut.type=org and aut.accesspoint
Subject heading: (aut.type any "geo ram_nc ram_ge ram_pe ram_co") and aut.accesspoint
Subject sub-division: aut.type=ram_pe and aut.accesspoint
Title (any): (aut.type any "tic tut tum ram_tp ram_tu") and aut.accesspoint
Title (uniform):(aut.type any "tut tum ram_tu") and aut.accesspoint
- Try a search from Authorities -> New from Z39.50/SRU
- Check that the authority is correctly displayed in "Show Marc"
- Check that the authority is correclty added to koha in "Import"
- prove t/db_dependent/Breeding.t
Signed-off-by: François Pichenot <fpichenot@ville-roubaix.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes a problem with layout of the page when viewing a closed
basket group. Changed the grid options for basket information when a
basket group is closed.
To test, apply the patch and go to Acquisitions -> Vendor -> Basket
groups. You should have multiple baskets and basket groups to test with.
- Edit an open basket group. The layout should look correct, with basket
group information in the form in the left column and ungrouped basket
in the right column. Grouping and ungrouping baskets should work
correctly.
- View a closed basket group. The basket group information should
display in a single column that spans the main part of the page.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch addresses the lack of sanitization of the "notes" field on
the OPAC "View Interlibrary loan request" page.
To test:
- Apply the patch
- As an OPAC user, create an ILL request
- Navigate to the request's "View Interlibrary loan request" page
- Add the following note:
Hello
<h1>TESTING</h1>
<script>alert('pwned');</script>
- Click "Submit modifications"
- TEST: Observe, when the page reloads, only the following is preserved in the
"Notes" textarea:
Hello
TESTING
- As a staff user, naviate to the ILL requests table
- Select "Manage request" for the request you created
- TEST: Observe that the Notes field only contains:
Hello
TESTING
- TEST: Observe that no Javascript alert is displayed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When the user is not superlibrarian or has the manage_suggestions
permission, the suggestion box on the left of the acq start page
needs to be hidden.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Without this patch only catalogue permission was required
for managing suggestions. This patch adds a new permission
in the acquisition module do manage suggestions and updates
staff user permissions accordingly.
To test:
- Make sure there is a pending suggestion
- Create a few users with different permission sets:
- User 1: only catalogue
- User 2: any acquisition permission
- User 3: cataloguing permission
- Check all of them can access: /cgi-bin/koha/suggestion/suggestion.pl
- Apply the patch
- Verify all of them now have the suggestions_manage permission
- Verify everything displays correctly on:
- intranet start page
- patron account in staff
- acquisition start page
- suggestion page (try to access by URL too)
- Remove suggestions_manage for a staff user
- Repeat tests above, access should be denied/links not visible
Bonus:
- Fixes the link on the acquisition start page for late orders
to mage the permissions of the page itself: order_receive
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's safer to send what we need from C4::Auth it's needed from a whole
module.
The SELECT COUNT(*) query will only be done when needed (so not made
from scripts outside of circ)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1. body tag was missing
2. make "Date" column sortable correctly
3. remove CDATA and type="text/javascript"
4. Handle server-side errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
3. In the JS console: "ReferenceError: $ is not defined", I did not
investigate it.
Where do you see this in the console? I cannot recreate on opac-user.pl
or on circ/checkout-notes.pl.
5. The alert id=error is displayed then hide in JS, but it's then
displayed half a second. We should hide it by default (css)
Fixed in this patch
6. I would move the "mark seen" and "mark not seen" buttons at the
top of the table
Fixed in this patch
8. Cursor on "Select all" and "Clear all" links must be adjusted
Fixed in this patch
9. $(".btn-xs").click(function(event){
The selector should be $("button.seen, button.notseen"), you
do not want to apply this function to all other btn-xs on
the page (maybe there are only two for now, but who knows
later?)
Fixed in this patch
12. Important: When a note is updated, it's still marked as
seen. Is it the expected behavior?
I don't see this behaviour. When a note is updated it is
marked as not seen.
opav/svc/checkout_notes:79: $issue->set({ notedate =>
dt_from_string(), note => $clean_note, noteseen => 0
})->store;
13. What will happen when hundred of notes will be on this
table? Not blocker but we will need a "hide seen" buttons to
filters the already seen notes.
Added in this patch
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch includes some changes required on comment 57:
1. Bad resolution conflict, permission self_checkout is re-add
2. The IGNORE modifier is missing in the INSERT statement
4. When I hit /circ/checkout-notes.pl from the side bar, the page displays "Checkout notes", nothing else. We should add "There is no checkout notes".
7. I would display the table on the confirmation screen as well
10. html filters are missing
11. span element should surround translatable string, to help translators
14. patron-title.inc must be used to display patron's info
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixing the comments in Comment 42
Ready to test
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
See Comment 27
This is ready to be tested.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Marcel, can you please have a look at this patch. I tried to implement
the change
my @notes = $schema->resultset('Issue')->search({ 'me.note' => { '!=', undef } }, { prefetch => [ 'borrower', { item => 'biblionumber' } ] });
to
my @notes = Koha::Checkouts->search({ 'me.note' => { '!=', undef } }, { prefetch => [ 'borrower', { item => 'biblionumber' } ] });
but am having problems on the template side. I can access the item and
biblio information about the issue, but not the borrower information,
even though the query is definitely pulling it correctly. Any
suggestions or ideas as to why this breaks?
This patch also adds the implementation of the circSidebar.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a user permission for managing issue notes, and a 'noteseen'
column to the issues table.
To test:
1) Apply Bug 14224 first
2) Apply this patch, update database, rebuild schema.
3) Restart koha-common and memcached
4) Turn on AllowCheckoutNotes syspref if haven't already
5) Issue two items to two different users (one item each)
6) Log into the OPAC as one of the users and add an issue note to their
issue
7) Log out and log back into the OPAC as the other user
8) Disable Javascript
9) Refresh opac-user.pl
10) Leave a checkout note on their issue
11) Enable javascript and log into the Staff Client as a superlibrarian
user
12) Go to your user's account and edit their permissions to have
everything ticked EXCEPT circulate->manage checkout notes.
13) Go to main intranet page. There should be no message saying
'checkout notes pending'.
14) Go to circulation home page. There should be no link to Checkout notes.
15) Go back to user's permissions and tick circulate->manage checkout notes.
16) Go back to main intranet page. There should now be a message at the
bottom saying 'Checkout notes pending: 2'
17) Go to circulation home page. There should be a link to Checkout notes
with a 2 next to it. Click this link
18) Attempt to mark an checkout note as seen. This should update the status
of the checkout note to 'seen' and disable to 'mark as seen' button while
enabling the 'mark as not seen' button.
19) Test both buttons with both issues.
20) Test select all and clear all buttons
21) Confirm that buttons at the bottom are only enabled if a checkbox is
checked
22) Try selecting both issues and using the buttons at the bottom to
mark multiple issue notes at once.
23) Confirm the barcode link to the item works as expected.
24) Confirm the cardnumber link to the user works as expected.
25) Confirm all table details show correctly.
Sponsored-by: Catalyst IT
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove self-checkout permissions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There is a missing optgroup closing tag in orderreceive.tt. It doesn't
actually cause any display issues (at least in modern browsers), but
it's invalid markup, so this patch fixes it.
_TEST PLAN_
0. Add a budget and add a fund
1. Add a vendor
2. Add a basket
3. Add an order to a basket
4. Close the basket
5. Receive the order
6. Make sure the budget and fund both display when selecting the fund
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Move to aqinvoice_adjustment
Move to Koha::Acquisition::Invoice::Adjustments
Test if variable exists before count
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This follow-up makes some changes to the way invoice adjustments are
displayed and added:
- Move this section into a <fieldset> to set it off visually from the
other sections of the page.
- Take the "add adjustment" fields out of the table and display them in
a standard way.
- Hide the "add adjustment" fields by default, shown via "add an
adjustment" link.
- Add deletion confirmation to adjustment deletions.
To test, add, delete, and change invoice adjustments as instructed in
the original test plan.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the ADJ_REASON authorised value category tot he atomic
update, and fixes code to display a hint of no reasons are defined
other minor updates to remove warns in logs
To test:
Apply patches
Run updates
Check authorised value categories to see ADJ_REASON exists
Add an adjustment, not you have no reaosn drop down
Note there is a hint if you hover
Add a value to ADJ_REASON
add another adjustment, note you can now add reasons (or not)
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=19166
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patchset adds the ability to add adjustments to an invoice, one can
provide a reason, an adjustment amount, select a budget, and choose
whether to encumber the funds before the invoice is closed or not
To test:
1 - Create a new invoice with or without a shipping cost
2 - Note there are no existing adjustments
3 - Add an adjustment
4 - Submit the form withno changes, nothing happens
5 - Update the adjustment you created, ensure changes are saved but no
extra adjustment created
6 - Add another invoice prodiving only reason or amount (you can have 0
value adjustments)
7 - Verify the adjustment total at bottom is correct
8 - Recieve some orders
9 - Verify totals are correct
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add/Update would update a field or create new if it existed, but didn't
allow for creating new if the field existed.
This patchset splits the options to 'Add & Update' so that 'Add' will always
add a field and 'Update' will operate as it always has
To test:
1 - Have a record with a known existing field (make a copy)
2 - Define a marc modification template that 'Add/update' on that field
3 - Define an 'Add/Update' on a field that doesn't exist
4 - Batch modify the copy of record using the above template
5 - Verify the existing field was updated
6 - Verify the non-existing field was updated
7 - Apply patch and update database
8 - Make another copy
9 - Modify the copy with the same template as above
10 - Should match initial modification
11 - Add a new rule to add a new field
12 - Modify using the updated template
13 - Ensure your new field is created
14 - Test various options in the modification tool
15 - prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enable article requests
2 - Search on staff client
3 - Click 'Request article'
4 - Find a patron
5 - View error in console
6 - Apply patch
7 - Reload
8 - Not error is gone
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the OPAC and staff client carts to use CSS to
control print output, removing a print parameter which was passed to the
script.
Currently, when you click "Print" on the OPAC basket, it navigates to
a new page and initiates window.print() followed by a
window.location.href change again. Unfortunately, due to differences in
IE, Chrome, and FF, it will either show the print options, navigate away
without showing them, or refuse to navigate away after printing. By
changing to using print CSS, we don't navigate away from the basket in
the first place, so we prevent this irregular behavior.
TEST PLAN
1) Apply the patch
2) Create an OPAC basket by clicking "Add to cart" on multiple items
3) Using Chrome, IE, and Firefox (of any version), click the "Print"
button
4) You should see the relevant print menu without the OPAC basket
re-loading in any way.
5) After printing is complete, you should still be on the OPAC basket
pop-up
6) Perform the same tests in the staff client
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the template for the lost items report to change the
way it handles a missing CSV profile. Now, if there is a missing CSV
profile, a message is displayed with details about the profile
requirements. If the logged-in user has the right permission there is a
link to the CSV profiles page.
Since item selection is used only in conjunction with exporting results,
item selection controls are all hidden when there is no valid CSV
profile.
To test, apply the patch go to Reports -> Lost items.
- Run the report with parameters which will return results.
- If your system has no CSV profile for exporting lost items:
- If you are logged in as a user with manage_csv_profiles permission:
- You should see a message dialog instructing you to create a CSV
profile with a link to the CSV profiles page.
- If you are not logged in as a user with manage_csv_profiles
permission:
- You should see a similar message but without a link to the CSV
profiles page.
- In both cases, with no CSV profile defined there should be no
checkboxes in the table of results and no "select all/clear all"
controls.
- If your system has a valid CSV profile for exporting lost items:
- Checking the checkbox for one or more items in the table should
trigger the display of an "Export selected items" link.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At the moment staff users need parameters or parameters_remaining_permissions
in order to be able to change exchange rates for acquisition orders.
This patch adds a new separate permission currencies_manage and
updates staff users currently having those permissions to get the
new permission as well.
To test:
- Create some staff users with different permission sets
1) superlibrarian
2) parameters
3) parameters_remaining_permissions
4) manage_circ_rules, but not parmeters_remaining_permissions
5) all acquisition permissions
- Apply patch and run database update
- Verify new permission has been added and staff users updated
1) remains the same
2) + 3) will have currencies_manage
4) remains unchanged, doesn't have new permission
5) remains the same, will have access now because of having
the top level acquisition permission
- Verify the changed pages work correctly:
- navigation on admin home page
NOTE: the acquisition parameters section will now honor all
different related permissions (edi_manage, budget_manage,...)
- navigation on acquisition home page
- try to access currencies page directly
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Try it with intranetreadinghistory allowed and not allowed and it should
still work in both cases
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Apply the patch
1) Go to administration -> Configure columns, note there is new
checkoutshistory-table in Catalogue section
2) Make some configuration in this table settings
3) Go to detail of any record -> Checkout history
4) The columns should be visible according to your configuration from
step 2
5) Play with Column visibility, to ensure it does work as it should
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Fixed a minor typo during signoff.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is not the first time we have this splice call, it seems safer to
rely on the column's name instead of the column's position
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Set AllowHoldItemTypeSelection to Allow
2) Place some hold for a patron, some with specific item type and some
without item type
3) On holds history page you should see blank or item type code in item
type column
4) Apply the patch
5) Now you should see description in item type column
6) Set AllowHoldItemTypeSelection to Don't Allow
7) You shold not see the item type column, but column visibility
settings should continue working ;)
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries would like to allow arbitrary lists to be used by all
librarians with the 'manage_patron_lists' permission.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create or find two patrons with the manage_patron_lists permission
4) Using the first patron, create two new lists, mark one of them as
shared
5) Log in as the second patron, browse to the patron lists page
6) Note the second patron can view, add and remove patrons from
the shared list owned by the first patron
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
