Test plan:
1) Apply this patch
2) prove t/db_dependent/Circulation.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previous patch but if another circ rule exists
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the case on-site checkouts are considered as a regular checkout in issuing
rules (i.e. ConsiderOnSiteCheckoutsAsNormalCheckouts is on):
When after the on-site checkout the maximum limit of checkouts is
reached and the patron wants to switch an on-site checkout to a regular
checkout, the C4::Circulation::TooMany subroutine will return a
TOO_MANY_CHECKOUTS error.
To avoid that, we need to allow an extra checkout in this subroutine.
Test plan:
0/ Switch ConsiderOnSiteCheckoutsAsNormalCheckouts and
SwitchOnSiteCheckouts on
1/ In the issuing rules, set the total number of checkouts (maxissueqty)
to 2 and the number of on-site checkouts to 2 (maxonsiteissueqty)
2/ Check 2 items out ticking the 'on-site checkout' checkbox
3/ Check one of these items out, to automatically switch it to a regular
checkout
=> The checkout should be allowed.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just move C4::Members::HasOverdues to
Koha::Patron->has_overdues and updated callers
Test plan:
No change in behavior is expected.
1/ If a patron is debarred and does not have overdues and
AutoRemoveOverduesRestrictions is on, the debarment will be removed on
checkin
2/ Add overdues and make sure the patron cannot renew
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Renewing an overdue would not work.
Log shows:
renew: Can't use string ("2144746608") as a HASH ref while "strict refs" in use at C4/Overdues.pm line 508., referer: /cgi-bin/koha/circ/circulation.pl?borrowernumber=1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Find an overdue checkout with a fine
2) Renew item, note fine is not closed out (Account type F)
3) Apply this patch
4) Find another overdue checkout with a fine
5) Renew item, note fine is now correctly closed out
6) Backdate a checkout to be already overdue ( but not have a fine since
fines.pl hasn't run yet )
7) Renew item, note a closed out fine is created
Signed-off-by: Sean Minkel <sminkel@rcplib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To verify:
- git grep itemissues
Result: Appears in C4/Circulation.pm only
To test:
- apply patch
- git grep itemissues
Expected result: No occurences
- prove t/db_dependent/Circulation.t
Expected result: Pass OK
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Koha/Patron.pm (wantsCheckPrevCheckout, doCheckPrevCheckout): Rename
to...
(wants_check_for_previous_checkout, do_check_for_previous_checkout):
...this.
* C4/Circulation.pm: Use new names.
* t/db_dependent/Patron/CheckPrevCheckout.t: Renamed to...
* t/db_dependent/Patron/Borrower_PrevCheckout.t: ...this.
Bug 6906: Fix POD reference to old method name.
* Koha/Patron.pm (wants_check_for_previous_checkout): Fix POD.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch picks the item's holding branch *before* it gets fixed
by using the checkin library instead. This way the RefundLostOnReturnControl
syspref set to ItemHoldingBranch is respected (otherwise, as Nick explained
this behaves just like if CheckinLibrary was set)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch makes AddIssue and AddReturn use the new implementation
The behaviour should respect the specification.
Sponsored-by: DoverNet
Sponsored-by: South-East Kansas Library System
Sponsored-by: SWITCH Library Consortium
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Margaret Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
To make sure the return can be done, AddIssue must not trust callers (they
should have done their job, but we are not sure) and check that the issue can
be returned before issuing to the patron.
There is no test plan here, this should not be possible from the Koha
interface.
However, looking at the code, it may be possible using SIP.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue is already checked out, CanBookBeIssued must check if the
issue can be checked in before processing the return.
In such cases (depending of the AllowReturnToBranch pref), the issue
should not be allowed.
Prior to this patch, the checkin was not done and the checkout failed
with "Duplicate entry '1204321' for key 'itemnumber'". Indeed since bug
14978, there is an uniq key on issues.itemnumber. Before bug 14978 the
issue existed but was hidden (and some weird behaviors certainly
happened!).
To avoid Koha to crash, a check is added to CanBookBeIssued (call to
CanBookBeReturned) and the librarian is not able to process the
checkout.
Test plan:
- Set AllowReturnToBranch to anywhere
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Confirm the checkout (should work with and without this patch)
- Set AllowReturnToBranch to holdinbranch ("only the library the item
was checked out from").
- Check an item (homebranch Library 1, holding branch Library 1) out from Library 1
- Check the item out from Library 2
=> Without this patch, Koha crashed
=> With this patch, you will be warned that the checkin is not possible.
Try other combinations of the AllowReturnToBranch syspref
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the limit for number of items checked out is reached, the message box
shows up but is empty.
Test Plan:
1) Disable AllowTooManyOverride
2) Check out items to a patron until the patron has reached the limit
of checkouts he or she can have
3) Try to check out one more item
4) Note the empty message box
5) Apply this patch
6) Try to check out one more item again
7) Note the message is now visible
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Note that few other occurrences exist in DB.
This patch also replaces a tab with 4 spaces.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is best to test when UTC date is a date in the future compared
to your timezone. I'm in Eastern, so right now, I expect this
test to fail for another 2.5 hours.
TEST PLAN
---------
1) prove t/Circulation/AgeRestrictionMarkers.t
-- fails for PEGI 15 after 9pm.
2) Apply patch
3) prove t/Circulation/AgeRestrictionMarkers.t
-- works.
4) koha qa test tools
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch allows the high holds loan length decrease to be overridden
either by a checkbox that remembers its setting during a series of
checkouts, or by a one time use override checkbox that will show
in the warning popup if a checkout is affected by high holds.
Test Plan:
1) Set up a checkout that will be affected by decreaseLoanHighHolds
2) Attempt to check out an item
3) Check the override checkbox
4) Note the checkout date is not reduced
5) Return the item
6) Start a new checkout for the patron
7) Check the "Don't decrease lean length based on holds" checkbox
8) Check out the item
9) Note you are not warned about the high holds decrease
and that the checkout length is not reduced
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some libraries would like to be able to limit hold filling to items that
match the pickup library for a hold based on the item's home or holding
library. The patron's home library should not affect whether a patron
can place the hold, instead the hold will only be fillable when an item
matching the pickup location becomes available.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the new "Hold pickup library match" rules for "checkout, hold,
and return policy" and for "holds policy by item type"
4) Set the policy to "item's holding library"
5) Place a hold where the item's holding branch does not match
the pickup branch
6) Check in the item
7) Note it is not trapped for the hold
8) Update the item's holding branch to match the pickup branch
8) Check in the item
9) Note the item is trapped for the hold
10) Repeat steps 4-9 but for home branch instead
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
GetLoanLength arbitrary defaulted to 21. The expected behavior seems to
be to default on 0 (loan will be dued today).
IMPORTANT NOTE: This patch will introduce a change in the behaviors for
configuration with a 0 in issuelength. Before this patch, the rule with
a issuelength==0 was skipped, now it's used!
Test plan:
1/ Do not define any rule: the due date will be today (before this patch
was +21 days)
2/ Define some rules which does not match the patron category, itemtype
or branchcode: the due date will be today (before this patch was +21
days).
3/ Modify a rule to match the checkout and set issuelength=0: the due
date will be today (before this patch, the rule was skipped)
4/ Modify this rule and set the issuelength to something > 0: the due
date will be adjusted (same behavior as before this patch)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works ok, checked 1-4
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch allows for more flexibility for determining when the number
of holds a record has should trigger the reduction of the loan length
for items on that record.
This patch adds a new system preference decreaseLoanHighHoldsControl,
which defaults to 'static', the original behavior of the feature.
It also has a new behavior 'dynamic' which makes the feature only
decrease the loan length if the number of holds on the record exceeds
the number of holdable items + decreaseLoanHighHoldsValue.
It also allows items to be filtered from the list of items based
on the damaged, lost, not for loan, and withdrawn values even if
those values would have allowed holds ( i.e. values < 0 )
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set decreaseLoanHighHolds to Enable
4) Set decreaseLoanHighHoldsControl to "over the number of items on the record"
5) Set decreaseLoanHighHoldsDuration to 1
6) Set decreaseLoanHighHoldsValue to 3
7) Create a record with 5 items
8) Please 8 or more holds on the record
9) Check out one of the items to a patron
10) Note the loan length is reduced to 1 day
11) Set decreaseLoanHighHoldsValue to 3 to 2
12) Check out one of the items to a patron
13) Note the loan length is *not* reduced
14) Enbale all the filters possible in decreaseLoanHighHoldsIgnoreStatuses
15) Set one item to be damaged
16) Note the loan length is reduced
17) Unset the damaged status
18) Repeat steps 15 - 17 for lost, not for loan, and withdrawn
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Right now, fines are updated based on the fine description. There are a
number of areas where this can go wrong ( date or time format changing,
title being modified, etc ). Now that issues has a unique
identifier, we should use that for selection and updating of fines.
Test Plan:
1) Apply this patch
2) Test creating and updating fines via fines.pl
and checking in overdue items. No changes should be noted.
3) prove t/db_dependent/Circulation.t
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch updates the calculation of 'No renewal before' to include the
new syspref NoRenewalBeforePrecision.
To test:
1) Check out an hour-based loan with 'No renewal before' set to 1.
Switch syspref NoRenewalBeforePrecision between 'date' and 'exact
time'. Confirm that with both settings the item cannot be renewed
until exactly one hour before due.
2) Check out a day-based loan with 'No renewal before' set to 1 day.
Confirm that:
* with NoRenewalBeforePrecision set to 'date', renewal is possible
at 12:00 AM on the day before due.
* with NoRenewalBeforePrecision set to 'exact time', renewal is
possible at 11:59 PM on the day before due.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Check in and check out were failing for me.
Specificly, the $borrower->{flags}->{...} was not accessible as
a hash, so I put a hash ref check around the code that would fail.
TEST PLAN
---------
1) Attempt a checkout
-- blows up with "1" not being allowed as a hash ref.
2) Apply patch
3) Attempt same checkout again
-- success
4) prove -v t/db_dependent/Circulation_dateexpiry.t
-- this triggers CanBookBeIssued
-- this should succeed
5) prove -v t/db_dependent/rollingloans.t
-- mine skipped the tests, but if configured, it
should also trigger and succeed.
6) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently if the AnonymousPatron system preference is in use, all patron
data is anonymized. Some libraries would like to be able to see the last
patron who returned out an item ( in case of damage ) but still keep all
other patrons anonymized.
* Add the table items_last_borrower ( id, itemnumber, borrowernumber )
* Add new system preference StoreLastBorrower
* If StoreLastBorrower is enabled, upon checkin have Koha insert into
this table the patron who last returned this item. Replace existing
row based on itemnumber if exists.
* If table has a row for a given item, link to the patron from the item
details page.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Enable StoreLastBorrower
4) Issue an item to a patron and return said item
5) Issue the same item to a second patron, do not return it.
6) View moredetail.pl for the given bib, find the given item. There
should be a new field in the history list 'Last returned by' with a link
to the last patron to return the item.
Optionally, you can also verify this works even if patron issuing
history has been set to anonymize issues upon return.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jen DeMuth <JDeMuth@roseville.ca.us>
Signed-off-by: Tom Misilo <misilot@fit.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If no value for 'no renewal before' is specified, automatic renewal now
falls back on the due date. Also 'no renewal before' can now be zero, so
both automatic and manual renewals can be delayed until due date.
Test plan:
1) Create some circulation rules with different settings for 'No renewal
before' and 'Automatic renewal'. Both daily and hourly loans should
work.
2) Try to renew both manually and automatically before and after a renewal
should be possible. You can run misc/cronjobs/automatic_renewals.pl for
automatic renewal.
3) Confirm that:
* Both automatic and manual renewal with 'No renewal before' set
to 0 do not happen before the due date (exact DateTime).
* Manual renewal with 'No renewal before' set to undef (enter empty
string) is unrestricted.
* Automatic renewal with 'No renewal before' set to undef does not
happen before the due date.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 3 subroutines are not used anymore:
- CheckRepeatableHolidays
- CheckSpecialHolidays
- CheckRepeatableSpecialHolidays
Moreover we have subroutines in Koha::Calendar to do this job.
Test plan:
git grep CheckRepeatableHolidays
git grep CheckSpecialHolidays
git grep CheckRepeatableSpecialHolidays
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subroutines removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch to remove deprectated C4::Dates from:
- circ/circulation.pl
- C4/Circulation.pm
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt
To test:
- Apply patch
- Go to the checkout site (Home > Circulation > Checkouts)
- Verify that data displays properly (including for users with a card
that expires in the near future, see syspref 'NotifyBorrowerDeparture')
- Search for regressions
- prove -v t/db_dependent/Circulation.t
(Amended following comment #9 / #11 25.10.2015 /mv)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested with syspref 'AdvancedSearchTypes' set to itemtypes an ccode (one at a time).
No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces 2 sysprefs :
RestrictionBlockRenewing to allow/block renewal of items when patron is restricted.
OverduesBlockRenewing to allow, block only the late ones or block all checked out items
Default is "allow" in both case.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
GetBranchBorrowerCircRule should return the value for maxissueqty and
maxonsiteissueqty. It's what this patch does.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this patch, the user will know why the checkout is refused.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr ary of this
error". IMO this should not happen, the history should be anonymised.
With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.
Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.
Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.
NOTE: This patch tweaks C4/Circulation.pm and provides tests.
applying just this, and running prove success. Reverting just
C4/Circulation.pm fails, as expected.
Tested OPAC stuff with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a missing space after Error: :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
