Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Drop and recreate your database
2. Restart memcached
3. Go through the web installer
4. In the onboarding tool create a patron with a password of only 2 characters in length
5. Notice the patron is successfully created and no warning message is
displayed
6. Repeat step 1,2,3 and create a patron with a password of 3 characters
none of which are a uppercase letter or number and notice the patron is
successfully created and no warning message is displayed
7. Apply patch
8. Repeat steps 1,2,3 and create a patron with a password consisting of
2 characters, notice that after submitting the form the same form is
loaded again and there is a warning message at the top of the page
informing you the patron wasn't created
9. Repeat steps 1,2,3 and create a patron with a password consisting of
3 characters (all lower case) and submit the form, notice the same form
is reloaded and a warning message at the top of the page informs you
that the patron wasn't created because the password was weak
10. Repeat steps 1,2,3 and create a patron with a password consisting of
3 characters (one lower case letter, one upper case letter and one
number) and submit the form and notice this time the next form in the onboarding is displayed with the message at the top of the screen informing you that the patron was successfully created
Sponsored-By: Catalyst IT
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch was obviously wrong, the category_type key appeared
twice.
categories.category_type is a varchar(1) and 'P' is not 'X'.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch re-adds some parameters I left out during some rebasing tasks
and ended up on a separate patchset (bug 18731).
The introduced parameters definitions are only used on endpoint definitions
that implement (at least) pagination. No need to test them here but easier
adding them here than on a patch implementing a new enpoint, which would become
a dependency for other endpoints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates the 'build_query_params' helper, instead of the
original function in Koha::Objects.
Unit tests are removed for Koha::Objects::_build_query_params_from_api and
written for the helper plugin.
The objects.search helper gets a call to build_query_params added. Tests for it
updated to match this behaviour change.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Koha/REST/Plugin/Query.t \
t/db_dependent/Koha/Objects.t \
t/db_dependent/Koha/REST/Plugin/Objects.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Following the discussion about the best way to make things simpler for
developing the REST api, I quote Lari's email:
"As many other endpoint will have the exact same usage, by looking at your example, I would prefer to avoid writing parameter / pagination / sorting / header handling for each list operation in our API controllers. Do you think it's possible to centralize all of this e.g. by passing $c into a customized search sub? Perhaps in Koha::Objects?
so instead we could have something like (ignore my bad choice of naming)...:
sub list_vendors {
my $c = shift->openapi->valid_input or return;
my $args = $c->validation->output;
my $vendors;
return try {
$vendors = Koha::Acquisition::Booksellers->api_list_search($c);
return $c->render(status => 200, openapi => $vendors);
} catch {
...
}
}"
We all agreed we neeed something like that. Here's a possible implementation. I take
advantage of the previously written Mojo helpers, that are fully covered by tests.
I submit this early so anyone can take a look and gather ideas to make it even better.
I'm already using it (effectively) for the /acquisitions/orders endpoint I'm writing
on bug 18731.
Thanks!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the helper handling _order_by params expect a list of
values instead of a (to-be-splitted) string.
The idea is that the OpenAPI plugin will take care of splitting
pipe-delimited values if the spec is correctly defined.
Note: In the process I noticed + on the URL represents a space, so the
helper function is updated to handle both + and %2B as ascending.
To test:
- Run:
$ kshell
k$ prove t/Koha/REST/Plugin/Query.t
=> SUCCESS: Tests pass!
- Sign off :-D
Edit: Removed rebasing leftover making the tests fail.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a helper function called 'dbic_merge_sorting'
to Koha::REST::Plugin::Query.
This simple function adds SQL::Abstract order_by attribute to the passed
$filter hashref, as explained in the POD.
It introduces a syntax for passing sorting params on the request to the REST api.
The proposed syntax has been found in the wild, and is pretty trivial to parse/work with:
GET /api/v1/<endpoint>?order_by=+column_1|-column_2|column_3
As explained on the POD, + stands for 'asc' and - for 'desc'. If ommited, it defaults to the
DB engine default (usually asc).
To test:
- Apply this patches
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/Koha/REST/Plugin/Query.t
=> SUCCESS: Tests pass! And they make sense! :-P
- Sign off :-D
Edit: renamed params to match DBIC terminology. My bad :-D (tcohen)
Sponsored-by: Camden County
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds information about RESTdefaultPageSize usage
when the per_page parameter is absent on the query.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug introduces a new syspref RESTdefaultPageSize that is used on
the Koha::REST::Plugin::Pagination plugin to default to a valid value
for the page size if the param is not present on the query.
This patch also considers the situation in which no 'page' param is
passed, and no header should be added.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/Koha/REST/Plugin/Pagination.t
=> FAIL: Tests fail because the plugin doesn't behave as the tests
expect.
- Apply this patch
- Run:
k$ prove t/Koha/REST/Plugin/Pagination.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: Camden County
Sponsored-by: ByWater Solutions
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces tests for a behaviour change in
Koha::REST::Plugin::Pagination.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/Koha/REST/Plugin/Pagination.t
=> FAIL: Tests should fail without the followup patch applied
Sponsored-by: Camden County
Sponsored-by: Bywater Solutions
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a new helper function to the Koha::REST::Plugin::Pagination
plugin, called 'dbic_merge_pagination'.
This simple function adds SQL::Abstract pagination attributes ('page' and 'rows') to the
passed $filter hashref.
To test:
- Apply this patches
- Run:
$ koha-shell kohadev
k$ cd kohaclone
k$ prove t/Koha/REST/Plugin/Pagination.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: Camden County
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces a Mojolicious plugin to be used on the REST api.
It adds a helper method:
generate_dbic_query
===================
When used, it generates what's needed to perform a search on
DBIC/Koha::Objects like this:
my $params = $c->validation->output;
my ($filtered_params, $reserved_params) = $c->extract_reserved_params($params);
my $filter = do_smth($filtered_params, $reserved_params);
my $attributes = do_smth_reserved($reserved_params);
my $patrons = Koha::Patrons->search( $filter, $attributes );
It introduces reserved param names:
- _match
- _order_by
- _page
- _per_page
They are reserved for later usage (pagination, matching algorithm on building DB queries)
All the plugin's behaviour is tested.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/Koha/REST/Plugin/Query.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: ByWater solutions
Sponsored-by: Camden County
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds unit tests for the new query parameters handling Mojo plugin.
Sponsored-by: Camden County
Sponsored-by: ByWater Solutions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds the 'subtitle' field to the results display on
acquistions search for adding an order form an existing item.
Any field mapped to 'subtitle' in 'Keyword to MARC mapping' will be
fetched and displayed in the results
To test:
1 - Perform an acquisitions search for existing record
2 - Note record subtitles are not displayed
3 - Map 245$b and 245$n to 'subtitle' in 'Keyword to MARC mapping'
4 - Note they are still not displayed ion acq results
5 - Apply patch
6 - subtitle fields should now display
Sponsored by: Round Rock Public Library
<https://www.roundrocktexas.gov/departments/library/>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds Elasticsearch related information to the 'About' page.
The information is gathered and displayed only when the 'SearchEngine' syspref
is set to 'Elasticsearch'. It displays configured nodes, and the status:
- Running
- Not running
In case it is running, it displays the defined indices and the document count on each.
If there are configuration problems, exceptions are catch and a convenient warning
message is displayed.
To test:
- Apply this patches
- Run:
$ kshell
k$ prove t/Koha/SearchEngine/Elasticsearch.t
=> SUCCESS: Tests pass!
- Have ES configured in your koha-conf.xml file (by default in kohadevbox)
- Set the 'SearchEngine' syspref to 'Elasticsearch'
- Comment out pieces of the elasticsearch-specific entries (server, index_name,
the whole elasticsearch block). Reload on each change.
=> SUCCESS: Warning messages are displayed and make sense in the context of your changes.
----> the rest of the tests require having ES running on the dev env. This can be easily
achieved by creating the kohadevbox using:
$ KOHA_ELASTICSEARCH=1 vagrant up
- Stop the 'elasticsearch' service:
$ sudo service elasticsearch stop
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, and the status is 'not running'
- Start the 'elasticsearch' service:
$ sudo service elasticsearch start
- Reload about.pl
=> SUCCESS: The configured nodes are displayed, the status is 'running' and
created indices info is displayed, along with the document count
on each index.
- Sign off :-D
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new statuc function to Koha::SearchEngine::ElasticSearch
which is instended to replace most of get_elasticsearch_params. This function
reads the configuration from C4::Context->config('elasticsearch') and raises
relevant exceptions when mandatory entries are missing.
Its behaviour is covered by tests.
To test:
- Run:
$ kshell
k$ prove t/Koha/SearchEngine/Elasticsearch.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Minor changes to pay.pl and paycollect.tt to allow writing off a partial amount of a fine.
Test plan:
0) Go to the Fines tab of a test patron's profile
1) Create a fine if there are none (under the Manual invoice tab)
2) Go to the "Pay fines" tab
3) Press the write off button on the corresponding account line
Without patch, you'll be asked to confirm, but will not be able to edit the amount
With patch, you'll be able to edit the amount.
Followed test plan, patch worked as described. Also ran QA test tool and
modified files passed
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When placing a hold for a patron whose pickup library and home library
are different, the message displayed only shows the branch code and not
the branch name.
This patch displays the branch name as well as the branch code.
To test:
1. Search for an item
2. Click 'place hold'
3. Enter patron name/card number for a patron whose home library is
different to the item's
4. Note the message displayed only shows the branch code but not the
name
5. Apply Patch
6. Repeat 1-3
7. Message should now also display the branch name
https://bugs.koha-community.org/show_bug.cgi?id=19769
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From bug commit bb6277ffcc
Bug 14464: Add ability to cancel waiting holds from checkin screen
+use Carp 'verbose';
+$SIG{ __DIE__ } = sub { Carp::confess( @_ ) };
See also
http://lists.koha-community.org/pipermail/koha-devel/2017-November/044168.html
Test plan:
Read the changes and make sure they make sense
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the acquisition frameworks (frameworkcode=ACQ) for new
installations.
It copies the 952 (MARC21) or 995 (UNIMARC) fields from the default
framework (frameworkcode='')
Test plan:
Create a new installation and make sure the ACQ framework exists.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This code seems a bit odd, $self->sort_fields()->{$name} is checking if
there is any mapping in ES for a field, so if one marc field in an index
is marked as sortable this will exists. We need to check the individual
marc field to see if it should be added to the sort index here.
If you apply the first patch, reindex, and view a record in es:
curl -XGET 'localhost:9200/koha_kohadev_biblios/data/19/?pretty' | grep
-A 10 author__sort
You will see that 245$c is included in the record without that
additional check
Apply this, reindex again, and that field should not be included
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply first patch and this patch
2 - prove -v t/db_dependent/Koha_Elasticsearch.t
3 - New tests will fail
4 - Apply followup patch
5 - Tests shuld pass
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix incorrect condition for if clause for generating <field>__sort mappings
for Elasticsearch. Also remove redundant check for same condition when
generating fixer rules.
Test plan:
1. Inspect current mappings for example by viewing: http://<elasticsearch_host>:9200/koha_<koha_instance_name>_biblios/_mapping.
2. If using the default configuraion only "author" has a sort field (author__sort).
4. Appy patch.
5. Reindex using rebuild_elastic_search.pl.
6. All fields except those with sort sort set to "0" should now have sort fields, which in the default configuration is all but "author".
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Speaks for itself. No test plan.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The script contains some error responses that get lost when using them
in an eval statement. (Since exit should not be used within an eval
construction.) The eval is removed now.
Test plan:
[1] Before applying this patch, you could look at the current responses
from unapi for the calls in the next steps. Apply the patch now.
[2] Call http(s)://[your-server]/cgi-bin/koha/unapi with only a format
parameter.
Check if you have a 400 status response. (In Firefox, look at Network
tab of Developer Tools.)
Note: Have to admit (reluctantly) that MS Edge shows the status code in
the browser rightaway in contrast with Firefox.
[3] Call unapi with a format=marcxml&id=999
The wrong id parameter should trigger a 404 response.
[4] Call unapi with format=marcxml&id=koha:biblionumber:[notexist]
where notexist is a biblionumber that not exists.
This should trigger again a 404 response.
[5] Call unapi with format=marcxmlx&id=koha:biblionumber:[exist]
where exist should be a good biblionumber.
The wrong format should trigger a 406 response.
[6] Bonus: The 500 response can be tested by manipulating a XSLT file.
Create invalid xml in the file for marcxml (identity.xsl in intranet
xslt folder).
Call unapi with format=marcxml&id=koha:biblionumber:[exist].
You should get a 500 response and have warnings in your logfile.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client's system preferences templates so
that JavaScript is included in the footer instead of the
header.
To test, apply the patch and test the JavaScript-driven features of
both the standard and local use system preferences:
- WYSIWYG editor
- Confirmation messages
- Table sorting
- Multiple selects (CoceProviders for example)
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client plugins template so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of
the modified template:
- The plugins link should be bold in the sidebar menu.
- Choosing "Uninstall" for an installed plugin should trigger a
confirmation alert.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies some staff client circulation templates so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of the
modified templates: All button controls, DataTables functionality, tabs,
etc.
- Article requests (enable ArticleRequests system preference, have at
least one outstanding article request)
- Request article (Bibliographic detail page -> Request article).
- Item circulation statistics (Bibliographic detail page -> Items ->
View item's checkout history).
- On-site checkouts (enable OnSiteCheckouts system preference; Check out
some items as on-site checkouts; Go to Circulation ->
Pending on-site checkouts
- Overdues report (Circulation -> Overdues).
- Holds to pull (Circulation -> Holds to pull).
- Renew
- Holds ratios (Circulation -> Holds ratios).
- Check in
- Transfers to receive (Circulation -> Transfers to receive).
- Holds queue (Circulation -> Holds queue).
- Holds awaiting pickup (Circulation -> Holds awaiting pickup).
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the staff client catalog search results template so
that JavaScript is included in the footer instead of the header.
To test, apply the patch and test the various JavaScript-driven features
of the results page: Floating toolbar, cart, lists, cover images, search
to hold, etc.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies more staff client patrons and circulation tools
templates so that JavaScript is included in the footer instead of the
header.
To test, apply the patch and test the JavaScript-driven features of
each modified template: All button controls, DataTables functionality,
form validation, etc.
- Batch patron deletion/anonymization
- Overdue notice/status triggers
- Batch patron modification
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies more staff client tools templates so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of
each modified template: All button controls, DataTables functionality,
form validation, etc.
Export data
Inventory
Notices & slips
Upload local cover image
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies some staff client templates from the "Tools"
section so that JavaScript is included in the footer instead of the
header.
- Automatic item modifications by age
- MARC modification templates
- Stage MARC records for import
- Staged MARC record management
To test, apply the patch and test the JavaScript-driven features of
each modified template: All button controls, DataTables functionality,
form validation, etc.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
