Intention of code is that data is output in utf-8 requires an
encoding layer to ensure that. ':utf-8' flags the stream as utf-8
but does not ensure output characters are correctly encoded
signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
While typing an authority, will automatically propose authorities (similar to
autocompletion for patron search if activated)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Tested searching for authorities with and without autocomplete. Note that
this is most useful when used in the "Main entry" box instead of the
"Main entry ($a only)" box.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Corrected tabs to spaces in auth-finder-search.inc while resolving merge
conflict.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed patch incorporating all previous patches (there is no functional
change compared to the previous version of this patch, this patch merely
squashes the original patch and follow-up, and rebases on latest master).
=== TL;DR VERSION ===
*** Installation ***
1. Run installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt1
and installer/data/mysql/atomicupdate/bug_7284_authority_linking_pt2
2. Make sure you copy the following files from kohaclone to koha-dev:
etc/zeradb/authorities/etc/bib1.att,
etc/zebradb/marc_defs/marc21/authorities/authority-koha-indexdefs.xml,
etc/zebradb/marc_defs/marc21/authorities/authority-zebra-indexdefs.xsl,
etc/zebradb/marc_defs/marc21/authorities/koha-indexdefs-to-zebra.xsl, and
etc/zebradb/marc_defs/unimarc/authorities/record.abs
3. Run misc/migration_tools/rebuild_zebra.pl -a -r
*** New sysprefs ***
* AutoCreateAuthorities
* CatalogModuleRelink
* LinkerModule
* LinkerOptions
* LinkerRelink
* LinkerKeepStale
*** Important notes ***
You must have rebuild_zebra processing the zebraqueue for bibs when testing this
patch.
=== DESCRIPTION ===
*** Cataloging module ***
* Added an additional box to the authority finder plugin for "Heading match,"
which consults not just the main entry but also See-from and See-also-from
headings.
* With this patch, the automatic authority linking will actually work properly
in the cataloging module. As Owen pointed out while testing the patch,
though, longtime users of Koha will not be expecting that. In keeping with
the principles of least surprise and maximum configurability, a new syspref,
CatalogModuleRelink makes it possible to disable authority relinking in the
cataloging module only (i.e. leaving it enabled for future runs of
link_bibs_to_authorities.pl). Note that though the default behavior matches
the current behavior of Koha, it does not match the intended behavior.
Libraries that want the intended behavior rather than the current behavior
will need to adjust the CatalogModuleRelink syspref.
*** misc/link_bibs_to_authorities.pl ***
Added the following options to the misc/link_bibs_to_authorities.pl script:
--auth-limit Only process those headings that match the authorities
matching the user-specified WHERE clause.
--bib-limit Only process those bib records that match the
user-specified WHERE clause.
--commit Commit the results to the database after every N records
are processed.
--link-report Display a report of all the headings that were processed.
Converted misc/link_bibs_to_authorities.pl to use POD.
Added a detailed report of headings that linked, did not link, and linked
in a "fuzzy" fashion (the exact semantics of fuzzy are up to the individual
linker modules) during the run.
*** C4::Linker ***
Implemented new C4::Linker functionality to make it possible to easily add
custom authority linker algorithms. Currently available linker options are:
* Default: retains the current behavior of only creating links when there is
an exact match to one and only one authority record; if the 'broader_headings'
option is enabled, it will try to link to headings to authority records for
broader headings by removing subfields from the end of the heading (NOTE:
test the results before enabling broader_headings in a production system
because its usefulness is very much dependent on individual sites' authority
files)
* First Match: based on Default, creates a link to the *first* authority
record that matches a given heading, even if there is more than one
authority record that matches
* Last Match: based on Default, creates a link to the *last* authority
record that matches a given heading, even if there is more than one record
that matches
The API for linker modules is very simple. All modules should implement the
following two functions:
<get_link ($field)> - return the authid for the authority that should be
linked to the provided MARC::Field object, and a boolean to indicate whether
the match is "fuzzy" (the semantics of "fuzzy" are up to the individual plugin).
In order to handle authority limits, get_link should always end with:
return $self->SUPER::_handle_auth_limit($authid), $fuzzy;
<flip_heading ($field)> - return a MARC::Field object with the heading flipped
to the preferred form. At present this routine is not used, and can be a stub.
Made the linking functionality use the SearchAuthorities in C4::AuthoritiesMarc
rather than SimpleSearch in C4::Search. Once C4::Search has been refactored,
SearchAuthorities should be rewritten to simply call into C4::Search. However,
at this time C4::Search cannot handle authority searching. Also fixed numerous
performance issues in SearchAuthorities and the Linker script:
* Correctly destroy ZOOM recordsets in SearchAuthorities when finished. If left
undestroyed, efficiency appears to approach O(log n^n)
* Add an optional $skipmetadata flag to SearchAuthorities that can be used to
avoid additional calls into Zebra when all that is wanted are authority
records and not statistics about their use
*** New sysprefs ***
* AutoCreateAuthorities - When this and BiblioAddsAuthorities are both turned
on, automatically create authority records for headings that don't have
any authority link when cataloging. When BiblioAddsAuthorities is on and
AutoCreateAuthorities is turned off, do not automatically generate authority
records, but allow the user to enter headings that don't match an existing
authority. When BiblioAddsAuthorities is off, this has no effect.
* CatalogModuleRelink - when turned on, the automatic linker will relink
headings when a record is saved in the cataloging module when LinkerRelink
is turned on, even if the headings were manually linked to a different
authority by the cataloger. When turned off (the default), the automatic
linker will not relink any headings that have already been linked when a
record is saved.
* LinkerModule - Chooses which linker module to use for matching headings
(current options are as described above in the section on linker options:
"Default," "FirstMatch," and "LastMatch")
* LinkerOptions - A pipe-separated list of options to set for the authority
linker (at the moment, the only option available is "broader_headings," which
is described below)
* LinkerRelink - When turned on, the linker will confirm the links for headings
that have previously been linked to an authority record when it runs. When
turned off, any heading with an existing link will be ignored.
* LinkerKeepStale - When turned on, the linker will never *delete* a link to an
authority record, though, depending on the value of LinkerRelink, it may
change the link.
*** Other changes ***
* Cleaned up authorities code by removing unused functions and adding
unimplemented functions and added some unit tests.
* This patch also modifies the authority indexing to remove trailing punctuation
from Match indexes.
* Replace the old BiblioAddAuthorities subroutines with calls into the new
C4::Linker routines.
* Add a simple implementation for C4::Heading::UNIMARC. (With thanks to F.
Demians, 2011.01.09) Correct C4::Heading::UNIMARC class loading. Create
biblio tag to authority types data structure at initialization rather than
querying DB.
* Ran perltidy on all changed code.
*** Linker Options ***
Enter "broader_headings" in LinkerOptions. With this option, the linker will
try to match the following heading as follows:
=600 10$aCamins-Esakov, Jared$xCoin collections$vCatalogs$vEarly works to
1800.
First: Camins-Esakov, Jared--Coin collections--Catalogs--Early works to 1800
Next: Camins-Esakov, Jared--Coin collections--Catalogs
Next: Camins-Esakov, Jared--Coin collections
Next: Camins-Esakov, Jared (matches! if a previous attempt had matched, it
would not have tried this)
This is probably relevant only to MARC21 and LCSH, but could potentially be of
great use to libraries that make heavy use of floating subdivisions.
=== TESTING PLAN ===
Note: all of these tests require that you have some authority records,
preferably for headings that actually appear in your bibliographic data. At
least one authority record must contain a "see from" reference (remember which
one contains this, as you'll need it for some of the tests). The number shown
in the "Used in" column in the authority module is populated using Zebra
searches of the bibliographic database, so you *must* have
rebuild_zebra.pl -b -z [-x] running in cron, or manually run it after running
the linker.
*** Testing the Heading match in the cataloging plugin ***
1. Create a new record, and open the cataloging plugin for an
authority-controlled field.
2. Search for an authority by entering the "see from" term in the Heading Match
box
3. Confirm that the appropriate heading shows up
4. Search for an authority by entering the preferred heading into the Main
entry or Main entry ($a only) box (i.e., repeat the procedure you usually
use for cataloging, whatever that may be)
5. Confirm that the appropriate heading shows up
*** Testing the cataloging interface ***
6. Turn off BiblioAddsAuthorities
7. Confirm that you cannot enter text directly in an authority-controlled field
8. Confirm that if you search for a heading using the authority control plugin
the heading is inserted (note, however, that this patch does not AND IS NOT
INTENDED TO fix the bugs in the authority plugin with duplicate subfields;
those are wholly out of scope- this check is for regressions)
9. Turn on BiblioAddsAuthorities and AutoCreateAuthorities
10. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is automatically created, and the heading you
entered linked
11. Confirm that if you enter a heading with only a subfield $a that fully
*matches* an existing heading (i.e. the existing heading has only
subfield $a populated), the authid for that heading is inserted into
subfield $9
12. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
13. Turn on BiblioAddsAuthorities and turn off AutoCreateAuthorities
14. Confirm that you can enter text directly into an authority-controlled field,
and if you enter a heading that doesn't currently have an authority record,
an authority record stub is *not* created
15. Confirm that if you enter a heading with only a subfield $a that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
16. Confirm that if you enter a heading with multiple subfields that *matches*
an existing heading, the authid for that heading is inserted into
subfield $9
17. Create a record and link an authority record to an authorized field using
the authority plugin.
18. Save the record. Ensure that the heading is linked to the appropriate
authority.
19. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
20. Ensure that the heading remains linked to that same authority.
21. Change CatalogModuleRelink to "on."
22. Open the record. Use the authority plugin to link that heading to the
same authority record you did earlier.
23. Save the record. Ensure that the heading is linked to the appropriate
authority.
24. Open the record. Change the heading manually to something else, leaving
the link. Save the record.
25. Ensure that the heading is no longer linked to the old authority record.
*** Testing link_bibs_to_authorities.pl ***
26. Set LinkerModule to "Default," turn on LinkerRelink and
BiblioAddsAuthorities, and turn AutoCreateAuthorities and
LinkerKeepStale off
27. Edit one bib record so that an authority controlled field that has already
been linked (i.e. has data in $9) has a heading that does not match any
authority record in your database
28. Run misc/link_bibs_to_authorities.pl --link-report --verbose --test (you may
want to pipe the output into less or a file, as the result is quite a lot of
information)
29. Look over the report to see if the headings that you have authority records
for report being matched, that the heading you modified in step 2 is
reported as "unlinked," and confirm that no changes were actually made to
the database (to check this, look at the bib record you edited earlier, and
check that the authid in the field you edited hasn't changed)
30. Run misc/link_bibs_to_authorities.pl --link-report --verbose (you may want
to pipe the output into less or a file, as the result is quite a lot of
information)
31. Check that the heading you modified has been unlinked
32. Change the modified heading back to whatever it was, but don't use the
authority control plugin to populate $9
33. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
34. Confirm that the heading has been linked to the correct authority record
35. Turn LinkerKeepStale on
36. Change that heading to something else
37. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
38. Confirm that the $9 has not changed
39. Turn LinkerKeepStale off
40. Create two authorities with the same heading
41. Run misc/migration_tools/rebuild_zebra.pl -a -z
42. Enter that heading into the bibliographic record you are working with
43. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
44. Confirm that the heading has not been linked
45. Change LinkerModule to "FirstMatch"
46. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
47. Confirm that the heading has been linked to the first authority record it
matches
48. Change LinkerModule to "LastMatch"
49. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--bib-limit="biblionumber=${BIB}" (replacing ${BIB} with the biblionumber
of the record you've been editing)
50. Confirm that the heading has been linked to the second authority record it
matches
51. Run misc/link_bibs_to_authorities.pl --link-report --verbose
--auth-limit="authid=${AUTH}" (replacing ${AUTH} with an authid)
52. Confirm that only that heading is displayed in the report, and only those
bibs with that heading have been changed
If all those things worked, good news! You're ready to sign off on the patch
for bug 7284.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master and squashed follow-up, 16 February 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master, 21 February 2012
Signed-off-by: schuster <dschust1@gmail.com>
use encoding(UTF-8) rather than utf-8 for stricter
encoding
Marking output as ':utf8' only flags the data as utf8
using :encoding(UTF-8) also checks it as valid utf-8
see binmode in perlfunc for more details
In accordance with the robustness principle input
filehandles have not been changed as code may make
the undocumented assumption that invalid utf-8 is present
in the imput
Fixes errors reported by t/00-testcritic.t
Where feasable some filehandles have been made lexical rather than
reusing global filehandle vars
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Before this patch, if we tried to import an authority with multiple $x
subfields into a bibliographic record, only the last value get added
to the form.
All repeated values should now be sent to the form.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
TransformHtmlToMarc(): changed interface - no point passing params when
they can be accessed from $cgi
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Patch reworked for master using Template::Toolkit.
To+
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Remove some unnecessary checks when check of error is
sufficient. Make the order in some cases more logical
Should remove some possibilities of runtime warning noise.
Although some calls belong to the 'Nothing could
ever go wrong' school have added some warnings
Signed-off-by: Christophe Croullebois <christophe.croullebois@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch addresses both security issues mentioned in the summary of the report
submitted by Frère Sébastien Marie included below.
---------------------------
The problem is here: 'C4/AuthoritiesMarc.pm' in the function 'DelAuthority':
The argument $authid is included directly (not via statement) in the SQL.
For the exploit of this problem, you can use 'authorities/authorities-home.pl'
with authid on the URL and op=delete (something like
"authorities/authorities-home.pl?op=delete&authid=xxx").
This should successfully call DelAuthority, without authentification...
(DelAuthority is call BEFORE get_template_and_user, so before authentification
[This should be an issue also...]).
Please note that the problem isn't only that anyone can delete an authority of
this choose, it is more general: with "authid=1%20or%1=1" (after inclusion sql
will be like: "delete from auth_header where authid=1 or 1=1") you delete all
authorities ; with "authid=1;delete%20from%xxx" it is "delete from auth_header
where authid=1;delete from xxx" and so delete what you want...
SQL-INJECTION is very permissive: you can redirect the output in a file (with
some MySQL function), so write thea file of you choose in the server, in order
to create a backdoor, and compromise the server.
Signed-off-by: Frère Sébastien Marie <semarie-koha@latrappe.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With this patch, in biblio record data entry form, when ... is clicked for an
authority controlled field, it's possible to select which heading repetion to
copy if the authority has repeated headings.
When there is just one authority repetition, the first one is displayed to
choose, as previously.
This patch is REQUIRED by French libraries following SUDOC UNIMARC format, and
cataloguing multilingual materials ie all Higher Educational and Research
libraries.
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fix warnings for uninitialized authtypecode on lines 646, 653.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
More podchecker cleanups to eliminate warnings / errors
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
working through the master branch to eliminate all
podchecker warnings/errors
Actual improvement to the quality of the POD will
come later (hopefully with assistance of others)
Signed-off-by: Andrew Elwell <Andrew.Elwell@gmail.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This is the sibling to the fix for this bug for the bib
editor. However, note that this change won't have a
direct effect yet, as currently you can't specify a
default value for a field or subfield in the authority
MARC frameworks. See bug 4887.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixed obvious warnings generators in scripts
with mismatched comparisons or undefined variables
removed temporary variable selected while ensuring the
comparison it represented was between two defined variables
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch, fix the unimarc 700-4 plugin, adding the plugin_parameters() function.
And add an eval, that permit to have error in plugin, but don't die the editor.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This patch change the page to use GET instead of post, and use independants "input"
names for searched values. Else the args are not passed to the next page due to
rewrite rules.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Most Perl scripts (as opposed to modules) do
not need to require Exporter.
No user-visible or documentation changes.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
merge works on the fly now.
But for an obscure reason, merge_authority.pl fails to update database when lanched on command line.
Adding one table to LOCK for noZebra UPDATE in Biblio.pm
You should remove C4::Search from merg_authority.pl
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
A button to delete (non-mandatory) subfields and fields
is added to the bib and authority MARC editors. This button,
which displays as a hypen or minus sign after the plus sign
to clone a field, acts as follows:
[1] When deleting a whole MARC field, if at least
one other repeat of that field exists, deletes
the field from the editor page. If the field
to be deleted is the last instance of that tag,
the contents of the field are cleared, not removed.
This allows one to delete all 650 tags, then
add a new one without having to reload the
record in the editor.
[2] When deleting a subfield, if at least one other
repeat of that subfield and its tag occurs
*anywhere else in the record, not necessarily in the same tag*,
deletes the subfield.
Otherwise, if the subfield is the last occurrence
of that tag/subfield combination, clears the input
form instead.
Documentation note: new screenshots for MARC editor, plus
description of the '-' button.
Credit to MJ Ray for introducing the '-' button
and the UnCloneField JavaScript function.
Signed-off-by: Andrew Moore <andrew.moore@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Use textareas for the 6XX fields when editing MARC21
authority records - these fields, not the 5XX, contain
the lengthy notes.
Note that because of the previous patch, both text inputs
and textareas permit entry of up to 9999 characters.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The maximum length allowed for input into a subfield in
the MARC editor has been increased to 9999 charaacters
(from 255), permitting data entry of a field that meets
the maximum MARC field limit of 9999 octets.
Also set the maximum length for the leader form input
to 24 characters and the length for the MARC21 008
to 40 characters.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Fix same as for 2205 - the orderby parameter is
currently required for authority searches.
Also set default results per page to 20 instead of
19.
No documentation changes.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
In any MARC record display in the OPAC or staff client
that displays the MARC tag numbers, the indicators are
now displayed as well, following the tag number. If an
indicator is a blank, it is displayed as '#'.
Add a function to C4::Koha, display_marc_indicators(), to
generate this display form of the indicators.
Refactoring note: the four scripts changed in this commit
have a lot of duplicate code that could be merged into
a MARC displayer class.
Documentation notes: screenshots of tagged MARC record
displays should be updated.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Instead of having one input field for both indicators
of a variable field, the bib and authority MARC editor
now has an input field for each indicator. This has
two main advantages:
* it is easier to tell what the indicator values are,
even when the first indicator is a space
* it is easier to set the first indicator to blank
and the second indicator to non-blank.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The find_values() function in authorities/authorities.pl
and authorities/detail.pl is not used; appears to be copied
from additem.pl.
No documentation changes.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The AddStatement op is an archaism from 2.2 that
has not been used in the templates for at least a
year.
No documentation changes.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
finalresult contained the whole list and not only the useful results.
resultlist contained only 19 elements. adding one
parameters passed through pages contained also empty parameters deleting them.
Conflicts:
C4/AuthoritiesMarc.pm
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
