Avoid the following error:
DBD::mysql::db do failed: Duplicate entry
'acquisition-xxx--email-default' for key 'PRIMARY' [for Statement "
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The change from the first patch requires a similar change in upload.pl
when a few error codes are passed to the template.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by deleting a temporary file manually and downloading or deleting
the file from the upload search results.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are several ways to mark an item an lost:
- item list view (catalogue/moredetail.pl, "Items" tab)
- cataloguing (cataloguing/additem.pl)
- Batch item modification tools (tools/batchMod.pl)
- The long overdue cronjob (misc/cronjobs/longoverdue.pl)
So far only the cronjob is configurable, the others mark the item as
returned (does the checkin).
This behaviour should be controlable using a syspref, to let libraries
choose what fit best for them.
Test plan:
Use the 2 options of the pref, mark checked out items as lost using the
different possibilities, and confirm that the behaviours make sense to
you
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After the introduction of Koha::Authorities->get_usage_count with bug
9988, we can now replace the remaining occurrences of CountUsage.
At the same time we remove CountUsageChildren. This was an empty sub.
The typo get_count_usage in a subtest title is adjusted.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Perform a search on authorities-home.pl and verify that you see
plausible numbers for 'used in xx records'.
[3] Click on Details for one authority. See the same number?
[4] Do the same as in 2/3 for Authority search on OPAC.
[5] Remember the authid and enter this in the record numbers box on
tools/batch_delete_records.pl. Select Authorities and click
Continue. The next form shows a column "Used in". Do you see
the same count again?
[6] Git grep CountUsage.
You should see just one hit in a comment that can be kept in
Koha/Authorities.pm.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a recurrent bug we have over the last years. When a script is
called with non-existent borrowernumber it will crashes.
We need to handle this gracefully instead of letting the script crashes.
On bug 18403 a new subroutine is added to the codebase
(output_and_exit_if_error) to handle this kind of errors correctly.
Since it is not pushed yet, I propose to just redirect to a script that
handle it correctly (circulation.pl) instead of adding this message to
all these scripts.
Test plan:
Hit different scripts from the members module and pass a non-existent
borrowernumber.
You must be redirected to circulation.pl with a friendly message.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change parameters to a hashref.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me.
Two calls in migration_tools/22_to_30 still in old style.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Template says ISO2709 but script wants MARC or MARCXML..
Slipped in with bug 19049.
Trivial but critical fix.
Test plan:
Import a MARC file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I picked this fix because I think MARC is always ambiguous. ISO2709
clearly denotes the serialization format used.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested by QA:
[1] Mock_config enable_plugins in the test.
[2] Fallback to MARC when format is empty. Remove die statement.
Added:
[3] Remove $marc. This variable got obsolete during development.
[4] Add test on $input_file and $plugin_class. Test $text before calling
Handler or processing $text. No need to split undef if somehow Handler
returned undef, etc. If the routine returns an empty arrayref,
stage-marc-import will do fine.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 12412 added the use of to_marc plugins allowing arbitrary file formats
in stage-marc-import (as long as the plugins can handle them). The feature
was not very visible in the code, and when bug 10407 added the marcxml
format, it made some changes that broke the use of to_marc.
This patch restores the functionality by:
[1] Adding a sub RecordsFromMarcPlugin to ImportBatch.pm, specifically
addressing the conversion from arbitrary formats to MARC::Record.
The original to_marc interface is used: pass it the file contents,
and it returns a string consisting of a number of MARC blobs separated
by \x1D.
Consequently, the call of to_marc is removed from routine
BatchStageMarcRecords where it did not belong. The to_marc_plugin
parameter is removed and two calls are adjusted accordingly.
[2] Instead of a separate combo with plugins, the format combo contains
MARC, MARCXML and optionally some plugin formats.
[3] The code in stage-marc-import.pl now clearly shows the three main
format types: MARC, MARCXML or plugin based.
Note: This patch restores more or less the situation after bug 12412, but
I would actually recommend to have the to_marc plugins return MARC::Record
objects instead of large text strings. In the second example I added a
to_marc plugin that actually converts MARC record objects to string format,
while RecordsFromMarcPlugin reconverts them to MARC::Records.
Test plan:
See second patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* tools/modborrowers.pl: Dereference 'branchcode' rather than
'value'.
Test Plan:
- Carry out "Batch patron modification" with any number of patrons.
+ Change the library.
+ Hit Save.
- The library will not have been updated.
- Apply patch.
- Run same modification.
- The library will have been updated
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a cardnumber does not exist, $borrower will be undef and the ->category call will explode
Can't call method "category" on an undefined value at
/home/vagrant/kohaclone/tools/modborrowers.pl line 370.
This patch makes sure the patron exists before calling any methods.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* tools/modborrowers.pl (GetBorrowerInfos): Fix setting of patron
category description.
* koha-tmpl/intranet-tmpl/prog/en/modules/tools/modborrowers.tt: Use
it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Create a patron list from imported patrons to be used for printing patron
cards and other patron list related actions.
To test:
- Apply patch
- Go to Home > Tools > Import patrons
- Select a file to import and check new checkbox 'Create patron list'
- Import file
- Verify that in import results you see the time stamped name of the
patronlist containig the imported patrons (if any patrons were imported)
- Go to Home > Tools > Patron lists
- Verify that the list shows up and contains the imported patrons
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Inventory tool performance seems to be worst since 16.11.
I think it is because of authorized values computing changed by Bug 17249.
For each subfield of each item, we try to get the authorized value description with Koha::AuthorisedValues->search_by_marc_field.
But this method does not use cache like Koha::AuthorisedValues->get_description_by_koha_field.
I propose to use Koha::AuthorisedValues->get_description_by_koha_field and also to look for authorized value description only for item fields used in TT : location, notforloan, itemlost, damaged, withdrawn.
I have experimented inventory time on 100 items from 5s to 1s.
Test plan :
- Without patch
- Perform inventory with barcode file
- Check results and mesure execution time
- Apply patch
- Reperform inventory with same barcode file
- Check results is the same
- Compare execution time
- Run prove t/db_dependent/Items/GetItemsForInventory.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Can't call method "unblessed" on an undefined value at
/home/vagrant/kohaclone/tools/import_borrowers.pl line 230, <$fh> line 2.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to "Save and continue editing" when editing
notices. The submit button is now a split button in a floating toolbar.
The secondary action of the split button is "Save and continue editing."
To test, apply the patch and go to Tools -> Notices.
- Open any notice for editing. Verify that the toolbar looks correct and
floats as it should when sections of the form are expanded and the
page scrolls.
- Edit a notice and click the "Save" button. Confirm that you are
redirected to the main Notices page and that your changes were saved.
- Edit a notice and click the "Save and continue editing" menu item.
The page should reload with your updates in place.
Signed-off-by: NickUCKohaCon17 <nicansjr@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Create a new framework - don't set it up
2 - Stage some records for import
3 - Manage the import, note your new framwork is in the list
4 - Apply patch
5 - Reload the page
6 - Note the framework is no longer an option
Followed test plan, worked as intended
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Biblio::GetBiblio can be replaced with Koha Biblio->find
Test plan:
Import batch, view issue history, search for items, see the image of a
bibliographic record, modify and delete records in a batch
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix POD error in Biblio.pm, as reported by qa tools:
Apparent command =cut not preceded by blank line
Resolve crash in t/db_dependent/Items/DelItem.t:
Can't call method "biblio" on an undefined value at C4/Items.pm line 669.
Add find test in tools/batchMod.pl. Increase readability of map statement.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To retrieve a biblionumber from an itemnumber, we can use:
Koha::Item->biblio->biblionumber
This is only what this patchset does.
Doing that we will be able to get rid of the
C4::Biblio::GetBiblionumberFromItemnumber subroutine.
Test plan:
- Acquisition module: cancel a receipt
- Export a record to CSV
- Modify items in a batch
Item's info should be correct
Other changes with be checked by QA team, by reading the code.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since bug 18242: When a biblio is deleted, a new transaction is created.
tools/manage-marc-import.pl use the AutoCommit flag, which does not
allow nested transaction.
AutoCommit must not be used.
Test plan:
Import a batch, then revert it.
The biblios must have been correctly deleted, they were not before this
patch
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Save a csv of biblionumber from MS/Excel
2 - Attempt to export records using this file
3 - It fails (mimetype is appliction/vnd.ms-excel)
4 - Apply patch
5 - Try again
6 - It succeeds!
Signed-off-by: Jason Palmer <jpalmer@switchinc.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was a typo in the permission code
Test plan:
Try to access the marc modification templates admin page with the
marc_modification_templates permission (and not all tools permissions)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, the value of compareinv2barcd is used to determine if the
Seen column, the Select/Clear all buttons and the Mark seen buttons are
displayed. But if we scanned barcodes, we already marked items as seen.
So we should only display these buttons when we did not upload barcodes.
Test plan:
[1] Upload a barcode file. Check that the result form does not show
the buttons.
[2] Generate an inventory list, so do not upload a barcode file. Verify
that you still see the buttons.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch contains the following changes:
[01] Label "Inventory date" reworded to "Last inventory date", adding a
small explanation for its purpose.
[02] Restructured the results: it was an array with items and possible
error messages. Multiple messages duplicated individual items. Now the
results are in a hash, pulling all error messages for one item together.
At the end of the script they are copied to an array. (A helper sub
additemtoresults is added in this regard.) We no longer use array
@items_with_problems.
[03] Both datepickers are no longer connected to the same class. This
prevents changing the set date by filling the last inventory date.
[04] Input markseen in the template and $markseen in the script are
no longer needed.
[05] The paragraph before the detail link in the results table in the
Title column has been removed. Same for problems column. This makes
vertical spacing consistent.
[06] Problem status 'missingitem' is no longer used; the missing items
are marked as 'not_scanned'. Two additional statuses are: no_barcode and
checkedout.
[07] Removed unused $itemtype, $totalrecords and $count. We use variable
$moddatecount to report a count to the template.
[08] The script updated scanned items twice. The first time with ModItem
and the second time with ModDateLastSeen. The second call is removed.
[09] If a book is checked in, we do no longer return an error message when
the checkin is successful (ERR_ONLOAN_RET). The updated datelastseen is
passed to the results.
[10] $wrongplacelist is renamed to $rightplacelist. It is only built when
we need it. (Same for inventorylist now.)
[11] Datelastseen (last inventory date) is always used for building the
inventory list. It allows you to process partial barcode lists or make
a list of items not seen after some date. We do no longer use variable
$paramdatelastseen.
[12] The section where items.datelastseen was compared with the inventory
date has been removed. Scanned items were already updated; to get items
seen before some date, you can now use last inventory date without passing
barcodes.
The form can mainly be used for the following three cases:
[1] Prepare an inventory list or csv file; we do not upload barcodes.
[2] Update items for uploaded barcodes without comparing to inventory.
Last inventory date is useless in this case.
Errors wrongplace, checkedout and changestatus are reported.
Use this scenario for partial scanned barcode lists (all but last).
[3] Update items for uploaded barcodes and compare to inventory, filtered
by an optional last inventory date.
Apart from the errors mentioned under [2], this also reports
not_scanned ("missing") and no_barcode.
Use this scenario too for the last partial barcode file (together with
inventory date).
Test plan:
See next patch ("Interface changes").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On bug 12913 a zero status is added on the inventory form. This prevents
a lot of false warnings for a wrong notforloan status. The zero status
is not included in the default setup. But if you would add one, the
status will display here twice now.
This patch checks if the status already exists.
Test plan:
[1] Add a zero NOTFORLOAN status if it does not yet exist in Authorized
values.
[2] Check that you do not see two "For loan" statuses on inventory form.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the pref is on, the notice template will be translatable in different
languages
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We will need a few additional parameters for merge later on. This patch
puts the original parameters in a parameter hash.
For the same reason DelAuthority gets a parameter hash here.
Note: We remove the second parameter from the DelAuthority call in
authorities/authorities-home.pl here. It was not used and could have
presented problems in the future.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t.
[2] Run t/db_dependent/Authorities/Merge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Hie, Tools > Batch record deletion seems broken.
Any deletion returns error :
Bibliographic record YYY was not deleted. An error occurred. (The error was: {UNKNOWN}: DBD::mysql::db begin_work failed: Already in a transaction at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1560. at /home/koha/src/C4/Biblio.pm line 3468 , see the Koha log file for more information).
Looks like it is because of Bug 18242 which added a transaction in C4::Biblio::_koha_delete_biblio_metadata : $schema->txn_do.
The script batch_delete_records created a transaction with $dbh->{AutoCommit} = 0;
This patch fixes by using also Koha::Schema in batch_delete_records to manage transaction.
It also removes "$dbh->{RaiseError} = 1", this behavior is managed in Koha::Database.
Test plan :
- Go to Staff interface : Tools > Batch record deletion
- Enter a few existing biblionumbers
- Click on "Continue"
- Click on "Delete selected records"
=> Without patch you get a DB error
=> With patch you get confirmation message
- Try to get the biblios to confirm they are deleted : /cgi-bin/koha/catalogue/detail.pl?biblionumber=xxx
- Test with and without Plack
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The zero status should be added in @notforloans. It is a legitimate status
for available books. The zero status description can be translated in
the template.
The 'Change item status' is confusing. We mean that we saw a notforloan
status that we do not expect (read: does not exist in the table).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In inventory tool, there is a test on scanned items notforloan value : if the value is not one of authorized values, the inventory results displays the problem "Change item status".
The bug is that if notforloan filter is not used, the notforloan values array is not filled and so all scanned items are marked with this problem.
Test plan :
- Check you have in default framework an item subfield mapped with items.notforloan and with an authorized value catergory, for example 'NOTFORLOAN'
- Check the authorized value category has at least value '0'
- Create a new value in this category, for example '9'
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and notforloan=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and notforloan=9
- Delete new value created above, for example '9'
- Create a file 'barecodes.txt' containing 2 lines '000AAA1' and '000AAA2'
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Choose file in 'Barcode file'
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Compare barcodes list to results'
- Submit
=> without patch, you get 2 results with problem 'Change item status' even for item with notforloan=0
=> with patch, you get 1 result with 'Change item status' on item with notforloan=9
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Reserve::GetReservesFromBiblionumber took 3 parameters, the
biblionumber, an optional itemnumber and a "all_dates" flag.
If set, the subroutine returned all the holds placed on a given bibliographic
record, even the ones placed in the future. Almost all of the calls had this
flag set, they will be replaced with a call to Koha::Biblio->holds.
But 5 did not have it:
- C4::Biblio::DelBiblio
-tools/batch_delete_records.pl
=> These 2 were wrong, we want to retrieve the holds to cancel them
before deleting the record. We need to get all the holds, even the ones
placed in the future /!\ CHANGE IN THE BEHAVIOR
- acqui/parcel.pl
=> 1 call per item were made to this subroutine. They have been replaced
with only 1 call to the new method Koha::Biblios->holds_placed_before_today
Then we filter on the itemnumbers.
I think this is wrong: we need the number of holds to know if the record
can be deleted, so even if future holds exist, the deletion should not
be possible.
- serials/routing-preview.pl
- C4::ILSDI::Services::GetRecords
- C4::SIP::ILS::Item->new
=> Seems ok, we just one to display holds placed before today
Test plan:
I would suggest to test this patch with patches from bug 17737 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The way the export options are displayed at the bottom of the checkouts table
was not consistent.
Prior to this patch set, they are display if ExportRemoveFields or
ExportWithCsvProfile is set.
It does not make any sense, the user could want to export the checkouts in
iso2709 format without having to define a csv profile and fill the pref.
Moreover the behavior of this pref did not match its description: it's used as
a default CSV profile when exporting records from the export tools or the
command line.
This patch set adds a new pref ExportCircHistory and remove
ExportWithCsvProfile. The new pref is set if ExportWithCsvProfile or
ExportRemoveFields were set.
A new dropdown list with the CSV profile list will be displayed in the
export area, at the bottom of the checkouts table.
Note that now --csv_profile_id is mandatory for the export command line
(misc/export_records.pl) if the export format is csv.
Test plan:
0/ Do not execute the DB entry
1/ Clear both ExportWithCsvProfile and ExportRemoveFields prefs
2/ Execute the DB entry
3/ ExportCircHistory should not be set and the export options should not
be displayed at the bottom of the checkouts table.
4/ Remove the pref
DELETE FROM systempreferences WHERE variable='ExportCircHistory';
and reinsert the previous one, with a value:
INSERT INTO systempreferences (variable, value) VALUES
('ExportWithCsvProfile', 'something');
Execute the DB entry again
=> The now pref should be now set
5/ Export some checkouts using the CSV entry
6/ Note that the export tool and commandline script still work using the
csv format. You have to provide a --csv_profile_id option to make it
work.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The parameter change in Koha::Token should be applied to the calling
scripts.
Test plan:
Confirm that the different forms of the scripts modified by this patch
still work correctly.
Test the problematic behavior:
Open 2 tabs with in same user's session, go on the edit patron page
(memberentry.pl).
Log out and log in from the other tab.
Submit the form
=> Wrong CSRF token should be raised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 18087 breaks export unless a file is supplied.
Can't use an undefined value as a HASH reference at
/home/vagrant/kohaclone/tools/export.pl line 75.
Test plan:
Export records using a file of id that is not a valid file (not txt or
csv)
Export records using a valid file
Export records without supplying a file
=> The export should work or fail as expected.
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Items::GetItemsCount can be replaced with Koha::Biblio->items->count
Test plan:
Create a bibliographic record with items attached
Try to delete the record from a basket (acquisition module), the detail
page and the batch item deletion tool.
=> You should not be able to delete it.
Remove the items and then try again to delete the record
=> Now you must be able to delete it.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Script tools/batch_delete_records.pl only checks the return value of
DelAuthority. The return value depends on DBI rows, which is not always
reliable. It may return -1 when it 'does not know'.
Testing $@ in tools/batch_delete_records.pl should actually be enough.
The return value was discarded in C4/ImportBatch.pm. Removing an unused
variable.
Test plan:
[1] Pick an authority record with a few linked biblios.
Delete this authority record via tools/batch_delete_records.pl.
Check if the linked biblio records are cleaned up.
[2] Bonus: Make a typo in the SQL statement of DelAuthority. Check
if batch_delete_records shows you the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::GetBorrowersWithIssuesHistoryOlderThan subroutine is supposed
to return the patrons with an issue history older than a given date.
It would make more sense to return a list of Koha::Patrons.
On the way, the code from AnonymiseIssueHistory will be moved as well to
anonymise_issue_history.
Note that these 2 subroutines are strongly linked: one is used to know the
number of patrons we will anonymise the history, the other one is used to
anonymise the issues history. The problem is that the first one is not used to
do the action, but only for displayed purpose.
In some cases, these 2 values can differ, which could be confusing.
Case 1:
The logged in librarian is not superlibrarian and IndependentBranches is set:
if 2+ patrons from different libraries match the date parameter, the interface
will display "Checkout history for 2 patrons will be anonymized", when actually
only 1 will be.
Case 2:
If 2+ patrons match the date parameter but one of them has his privacy set to
forever (privacy=0), the same issue will appear.
This patch moves the code from C4::Members::GetBorrowersWithIssuesHistoryOlderThan
to Koha::Patrons->search_patrons_to_anonymise and from
C4::Circulation::AnonymiseIssueHistory to
Koha::Patrons->anonymise_issue_history
Test plan:
1/ Confirm the 2 issues and make sure they are fixed using the Batch
patron anonymization tool (tools/cleanborrowers.pl)
2/ At the OPAC, use the 'Immediate deletion' button to delete all your
reading history (regardless the setting of the privacy rule)
3/ Use the cronjob script (misc/cronjobs/batch_anonymise.pl) to
anonymise patrons.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an invalid file is used as biblionumber list, we should display a
message.
Test plan:
1/ Use csv, plain text files
=> Should work
2/ Use invalid files (binary files like pdf, doc*, xsl*, etc.)
=> Should not work and see a warning message.
Amended patch after signoff: Remove one warn debug line
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The field opac_news.new is very confusing and should be renamed.
If you want to access it via Koha::NewsItem you will have trouble:
use Koha::News;
my $news_item = Koha::News->next;
say $news_item->new;
=> Attempt to bless into a reference at /home/vagrant/kohaclone/Koha/Object.pm line 78.
This patchset is going to rename this DB field to opac_news_content instead.
Since the opac_news.new can be used in notice templates, we need to warn the
user during the update DB process that some templates must be updated.
Test plan:
0/ Apply the first patch "Add a test to highlight the issue" and confirm that
the test fail
1/ Apply this second patch
2/ Execute the DB entry
3/ Confirm that you get a warning if at least one of your notice templates is
using opac_news.new
4/ Confirm that the test new pass
5/ Add/update and delete a news
6/ Confirm that the RSS new feed still works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
