From where patrons it's about patrons, we do not want to display the libraries
from all the system, but only the ones from the group.
Test plan:
- See the overdues (circ/overdue.pl) and make sure you can only see overdues from
patrons part of your group (do not forget to test the CSV export).
- Search for patrons, the 'library' filters (headers and left side) should only
display libraries from your group
- Search for article request by patron's library: only the libraries from your
group should be displayed
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Login with a patron that only have the 'edit_borrowers' permission.
You should be able to access patron's information of patrons inside of your group.
Technical note:
Before this patchset the borrowers permission module contains only 1 permission 'edit_borrowers'.
That meant
borrowers => 1
and
borrowers => '*'
had the same behavior.
Moreover, now that we have 2 permissions, 'CAN_user_borrowers' is set when all
permissions of 'borrowers' are set.
We need to update the different occurrences of these tests.
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Feature using it is completely undocumented as far as my research has
shown.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
Look up a borrower, add a message (internal or opac)
Click the Details tab for that borrower
Messages should be displayed above the user information [is this the right place? it could go below]
adding messages on this page should make them immediately available
deleting messages on this page should delete them immediately and bring you back to the detail page.
Basically, make sure messages work from both the Check out and detail pages and that there are no typos.
Messages should work the same as they always have from the Check Out page.
sponsored-by: Catalyst IT
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Marjorie Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Bug 19801 - Fixes for QA
- Fixes indentation
- changes messages to patron_messages (even though it's not like that on the circulation page.)
Signed-off-by: Marjorie Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Test Case:
Check the following files have been updated from
use strict;
use warnings;
to
use Modern::Perl;
bookcount.pl
branchoverdues.pl
branchtransfers.pl
circulation.pl
hold-transfer-slip.pl
reserveratios.pl
returns.pl
selectbranchprinter.pl
transfer-slip.pl
transferstoreceive.pl
view_holdsqueue.pl
waitingreserves.pl
ypattrodue-attr-search-authvalue.pl
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Have a patron with more then one checkout
2) Return one of patron's checkout and confirm the remaining number of
checkout is not shown
3) Apply the patch
4) Try it again and confirm the number is now shown
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are passing the Koha::Patron::Category object to the template instead
of the categorycode.
To reproduce this bug you must test in a system which has only one
patron category of the "adult" type. View the details of a patron with a
child-type patron category and choose More -> Update child to adult
patron.
This results in an error:
Can't call method "category_type" on an undefined value at
/home/vagrant/kohaclone/members/update-child.pl line 84.
The URL of the error page shows a problem with the parameters being
passed:
members/update-child.pl?op=update&borrowernumber=12345&catcode=Koha::Patron::Category=HASH(0xa168a18)&catcode_multi=
Test plan:
Make sure you have only 1 adult patron category
Update a child to adult
=> With this patch applied the error is gone and the patron has been
correctly updated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to make subroutine from C4 use more Koha::Object objects
Seeing bug 19276, starting here is a good start.
Test plan:
The tests should still pass.
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Error is "The method noreturn is not covered by tests!"
caused by commit 6eade474ed
Bug 18276: Remove GetBiblioFromItemNumber - Easy ones
When the "Return policy" (var returnbranch) is set to "Item floats" (value noreturn)
the library must be the current library (from userenv).
This behaviour is used in C4::Circulation::AddReturn
On bug 18276 I assumed that the value was either holdingbranch or
homebranch, and forgot it could be "noreturn"
Test plan:
Set Return policy to Item floats
Check an item in
=> without this patch it explodes
=> With this patch applied it will check the item in
Signed-off-by: Mohd Hafiz Yusoff <mhby87@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
... and maybe other bugs as well
What happens here is that $itemnumber is no longer set when barcode is
passed.
Test plan:
1. Check in available/not on hold item at a non owning library.
2. Click print slip
3. Item's info must be displayed on the slip
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add reservedate to report.
Change label "Available since" to "Waiting since".
Note: The table (already) crosses the boundaries of its container. Also
the vertical spacing for the first column (already) is not the same as the
others. (Adding the second date only makes it more visible.) These minor
design issues should be solved on another report.
Test plan:
[1] Go to Circulation, Holds awaiting pickup
[2] Note the additional column for reservedate.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a patron let a note on the checkout (AllowCheckoutNotes), it is
supposed to be displayed when checked in.
Test plan:
1/ Enable AllowCheckoutNotes
2/ Check an item out
3/ At the opac let a note on the checkout
4/ Check the item in
=> With this patch applied you should see the notes displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From bug commit bb6277ffcc
Bug 14464: Add ability to cancel waiting holds from checkin screen
+use Carp 'verbose';
+$SIG{ __DIE__ } = sub { Carp::confess( @_ ) };
See also
http://lists.koha-community.org/pipermail/koha-devel/2017-November/044168.html
Test plan:
Read the changes and make sure they make sense
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetReservesForBranch simply returns the waiting holds, for a specific
branch of not. This can easily be replaced with a call to
Koha::Holds->waiting
To avoid any regressions, I reuse the exact conditions (priority = 0),
but I do not think it is useful.
Test plan:
Make sure the holds information are correctly displayed on the waiting
holds screen.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It appears that has never worked.
Could someone confirm?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch drops the notifys table and its related code in C4::Overdues.
A second patch should remove the 2 columns notify_id and notify_level
from the accountlines table.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mimicking what does BlockReturnOfWithdrawnItems we can easily add a new
syspref to block return of lost items.
This patch adds BlockReturnOfLostItems, if set to 'Block' a item marked
as lost cannot be checked in.
Test plan:
1/ Set BlockReturnOfLostItems to 'Do not block'
2/ Check an item out to a patron
3/ Edit the item and mark it as lost (*)
4/ Check the item in
=> The item is checked in
5/ Edit the item and remove the lost status
6/ Check the item out again
7/ Edit the item and mark it as lost (*)
8/ Check the item in
=> The item is not checked in
(*) There are 2 ways to mark an item lost:
- From the item list view (/catalogue/moredetail.pl?biblionumber=42)
If you set the lost status from this form, the issue will be returned
Maybe this should be optional (?)
- From the edit items form (/cataloguing/additem.pl?biblionumber=42)
It is the form you must use to not mark the issue returned.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you click Submit on the staff home page without entering a cardnumber, you will find these warnings in the log:
Problem = a value of override_high_holds has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of nopermission has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Use of uninitialized value $val in concatenation (.) or string at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Cause is this call to $template->param:
$template->param(
CircAutocompl => C4::Context->preference("CircAutocompl"),
debarments => GetDebarments({ borrowernumber => $borrowernumber }),
todaysdate => output_pref( { dt => dt_from_string()->set(hour => 23)->set(minute => 59), dateformat => 'sql' } ),
has_modifications => $has_modifications,
override_high_holds => $override_high_holds,
nopermission => scalar $query->param('nopermission'),
In this specific case GetDebarments returns undef in list context (empty list),
so all items in the list shift one place.
Either we should force GetDebarments to return []; or we force scalar context in a construction like this. This patch does the last thing.
Note: The calls in memberentry.pl and moremember.pl are not affected.
Test plan:
[1] Do not apply. Click Submit without cardnumber. Check the log.
[2] Apply. Click Submit again without cardnumber. Check log.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems this has been caused by
commit 1544f9a5d4
Bug 18276: Remove GetBiblioFromItemNumber - circulation pages
To reproduce the problem you need switch on the two prefs
- OnSiteCheckouts
- OnSiteCheckoutsForce
Test plan:
Try to check an item out using an unknown barcode
With the 2 prefs set to on and without this patch, you will get the
following error in the log
Can't call method "materials" on an undefined value at
/home/vagrant/kohaclone/circ/circulation.pl line 387.
With this patch applied you should not get this error and a correct
behaviour for the different pref combinations.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Have some overdued checkouts in your database
2) Go to circulation -> overdues (overdues.pl)
3) Try to sort the overdues table by due date and notice it is sorted
alphabetically, not by date
4) Apply the patch
5) Try again and confirm, it is sorted by date
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a recurrent bug we have over the last years. When a script is
called with non-existent borrowernumber it will crashes.
We need to handle this gracefully instead of letting the script crashes.
On bug 18403 a new subroutine is added to the codebase
(output_and_exit_if_error) to handle this kind of errors correctly.
Since it is not pushed yet, I propose to just redirect to a script that
handle it correctly (circulation.pl) instead of adding this message to
all these scripts.
Test plan:
Hit different scripts from the members module and pass a non-existent
borrowernumber.
You must be redirected to circulation.pl with a friendly message.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change parameters to a hashref.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me.
Two calls in migration_tools/22_to_30 still in old style.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Restore datepicker class
Use Koha.Preference
Copy changes to moremember
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If an item is checked out with the auto renewal flag and a confirmation
is needed (holds exist, past due date, etc.) the auto renewal flag will
get lost.
Test plan:
- Check an item out and specify a past due date
- Confirm the checkout on the confirmation screen
=> Without this patch the checkout is not marked as auto renewal
=> With this patch applied the auto renewal flag will be set to the
checkout
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha suffers of big bugs due to its history: When data are deleted, they
are moved to another tables.
For instance issues and old_issues: when a checkin is done, it is moved
to the old_issues table.
That leads to a main problem that is described on
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
However we tried first to fix the problem (for issues/old_issues) at
code level on bug 18242.
The goal was to prevent data lost.
Data lost may happens in this case:
Check an item out (issue_id = 1)
Check an item in (issue_id = 1)
Restart MySQL (reset auto increment for issue_id to 1)
Check an item out (issue_id = 1)
Check an item in => BOOM, the issue_id is a PK in old_issues and the
move fails.
Before bug 18242 the data were lost, we inserted the value into
old_issues, which fails silently (because of RaiseError set to 0 in
Koha::Database), then delete the row from issues.
That has been fixed using a transaction.
This patch introduced a regression we tried to fix on bug 18651 comment
0, the patron was charged even if the checkin was rejected.
A good way to fix that would have been to LOCK the tables:
1- Start a transaction
2- LOCK the table to make sure nobody will read id and avoid race
conditions
3- Move the content from one table to the other, dealing with ids
4- UNLOCK the table
5- Commit the transaction
But there were problems using LOCK and DBIx::Class (See commit
905572910b - Do no LOCK/UNLOCK the table).
Finally the solution implemented is not acceptable for several reasons:
- batch checkins may fail
- issue_id will always stay out of sync (between issues and old_issues)
See 18651 comment 66.
Since the next stable releases are very soon, and we absolutely need to
fix this problem, I am suggesting to:
1- Execute the move in a transaction to avoid data lost and reject the
checkin if we face IDs dup
=> It will only reject 1 checkin (max is 1 * MySQL restart), no need to
deal with race conditions,
2- Display a warning on the checkin page and link to a
solution/explanation
3- Communicate as much as we can on the proper fix: Update auto
increment values when the DBMS is restarted -
https://wiki.koha-community.org/wiki/DBMS_auto_increment_fix
4- Display a warning on the about page for corrupted data (see bug
18931)
5- Write and make available a maintenance script to fix corrupted data
(TODO LATER)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subroutine C4::Biblio::GetBiblioFromItemNumber was wrong for several
reasons:
- badly named, we can get biblio info from a barcode
- SELECT * from items, biblio and biblioitems
makes things hard to follow and debug, we never know where do come from
the value we display
- sometimes called only for trivial information such as biblionumber,
author or title
This patchset suggests to replace it with calls to:
- Koha::Items->find for item's info
- $item->biblio for biblio's info
- $item->biblio->biblioitem for biblioitem's info
Test plan:
Item's info should correctly be displayed on the following pages:
- circulation history
- transfer book
- checkin
- waiting holds
QA will check the other changes reading the code, it's trivial
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Checkout items in a batch
The information displayed should be ok (title, subtitles, author,
itemnotes, barcode)
2. Checkout an item using the standard checkout page
You should correctly see the information of the item that has been
checked out (title and author)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are a few calls to GetItemIssue where it's not as easy to make
sure everything will be fine just replacing the calls with a
Koha::Issues->find
- In AddReturn the overdue flag is used (that's why this patch depends
on bug 17689)
- In CanBookBeRenewed, as well as the overdue flag the dates converted
to DateTime were used. It's now our job to convert them when we need
them.
- Same in AddRenewal but we also call _CalculateAndUpdateFine, so we
need to update the variables in this subroutine.
Note that, prior to this patch, AddReturn returned the GetItemIssue
hashref in the $iteminformation. Most of the time this variable is not
used, I have found only 1 place where it's used: circ/returns.pl
TODO: In this script we should call ->is_overdue instead of the
DateTime->compare calls
Test plan:
All the circulation tests must pass (it's how I have caught the specific
cases).
Do some checkins/checkouts/renewal and focus on the due date
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removing the commented section from the template: If it does not work, it should not be here.
When it works again, put it back in.
Since @itemtypesloop is not used, remove it from the script too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Aleisha spotted the typo in $itemtypes and proposed a correction on bug 18859.
The description was not even used. Template calls GetDescription.
To test:
Verify that viewing the holds queue still works as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the different calls to GetReservesFromBorrowernumber
with a calls to Koha::Patron->get_holds.
In some places we need to get a restricted set of holds, that's why we
process a search on this holds returned by ->get_holds (on the found
status for instance).
The changes are quite trivial and reading the diff should be enough to
catch bugs.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17737,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Tested both patches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The C4::Koha::getitemtypeinfo subroutine did the almost same job as
GetItemTypes. On top of that it returned the imageurl value processed by
C4::Koha::getitemtypeimagelocation.
This value is only used from the 2 [opac-]shelves.pl scripts. Then it's
better not retrieve it only when we need it.
Test plan:
Play with the different scripts touched by this patch and focus on item
types. The same description as prior to this patch must be displayed.
Note that sometimes it is not the translated description which is
displayed, but that should be fixed on another bug report. Indeed we do
not expect this patch to change any behaviors.
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch set the lang parameter when C4::Letters::GetPreparedLetter is
called to generate the notice.
Note that we do not need to pass it if want_librarian is set.
TODO: I do not know what to do with TransferSlip
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17680 is removing it.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a "Note" input field to checked out items in the "your summary"
section. The field allows patrons to write notes about the item checked out,
such as "this DVD is scratched", "the binding was torn", etc. The note will be
emailed to the library and displayed on item check in.
Patch adds two fields to the "issues" table - "note" and "notedate".
Patch adds syspref "AllowIssueNotes" - default off.
Test Plan:
1) Apply this patch
2) Update database
3) Rebuild schema
4) Turn on 'AllowIssueNote' syspref
5) Check out three different items to a borrower (may be easiest to check
out to yourself)
6) Log in as that borrower (or yourself) on the OPAC side and go to your
summary
7) Confirm text field shows under Note column for all checkouts. Set a
note for each issue, confirm all save.
8) Check the message_queue in mysql for the entries for ALL THREE issue
notes.
9) Disable javascript in your browser
10) Refresh your summary page. Confirm that you can no longer edit the
notes in the text field. Click the 'Create/edit note' button and confirm
you are redirected to a new page.
11) Confirm that the correct title and author show for the note button
you clicked.
12) Set the note and click Submit -> confirm you are redirected
back to summary page and note is saved
13) Confirm there is a new entry in message_queue
14) Enable javascript and go back to the your checkouts page in the
staff client for the borrower you issued the items to
15) Check in TWO items
16) Confirm that the issue notes show under the "Date due" column for
the two items you checked in, and are accurate to the item (i.e. the
right issue note under the right item)
17) Go to circ/returns.pl and check in the final item using the barcode.
Confirm the issue note shows and the date is formatted correctly.
Sponsored-by: Region Halland
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marc Véron <veron@veron.ch>
This problem stems from bug 17642, if items.materials is not linked to
an authorized value the contents are being tossed out. We shuold display
them instead
To test:
1 - Ensure items.materials 952$3 is not mapped to an authorized value
2 - Add a value to an item
3 - Check the item out, note the materials does not display
4 - Check the item in, note the materials does not display
5 - Apply patch
6 - Check the item out, note the materials does display
7 - Check the item in, note the materials does display
Followed test plan, message about material displays as expected
whil checking out and in.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When checking in, information about patrons with a hold always display
in an US style. Address information should opey the system preference
AddressFormat
To reproduce:
- Set syspref AddressFormat to German style
- Check out an item to a patron A
- Put a hold on this item for patron B
- Check in item using the Check in field in page header
- Result: In message 'Hold found', address does not display in German
style
To test:
- Apply patch
- Repeat steps above
- Verify that address displays as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the retrieval of the syspref borrowerRelationship
from the scripts and moves it to a check using the Template Toolkit
plugin
To test:
1 - Apply patch
2 - Ensure 'Add child' button displays appropriately on all member pages.
Tested 3 pateches together, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On the same way of Koha::Biblio->get_holds,
Koha::Biblio->get_holds_placed_before_today and Koha::Patron->get_holds,
this new subroutin will permit to retrieve the holds placed on a
specific item.
Note that at the moment we do not need a Koha::Item->get_holds method:
we do not want to display future holds placed in the future.
Test plan:
I would suggest to test this patch with patches from bug 17736 and bug 17738,
to place different kind of holds (biblio and item level, future and
past).
Then do a whole workflow to detect bug, view a record, delete record,
order, place a hold on an item which has been ordered, etc.
The hold's informations should always be the same without or without
these patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a datatable to the circ overdue report. Since the
datatable makes sorting easy, I've also removed the sort by filter on
the side.
To test:
1) Go to Circulation -> Overdues
2) Notice overdues report shows as datatable
3) Confirm sorting on all columns works
4) Test the Filters and confirm they all still work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Baptiste Wojtkowski <baptiste.wojtkowski@biblibre.com>
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The way the export options are displayed at the bottom of the checkouts table
was not consistent.
Prior to this patch set, they are display if ExportRemoveFields or
ExportWithCsvProfile is set.
It does not make any sense, the user could want to export the checkouts in
iso2709 format without having to define a csv profile and fill the pref.
Moreover the behavior of this pref did not match its description: it's used as
a default CSV profile when exporting records from the export tools or the
command line.
This patch set adds a new pref ExportCircHistory and remove
ExportWithCsvProfile. The new pref is set if ExportWithCsvProfile or
ExportRemoveFields were set.
A new dropdown list with the CSV profile list will be displayed in the
export area, at the bottom of the checkouts table.
Note that now --csv_profile_id is mandatory for the export command line
(misc/export_records.pl) if the export format is csv.
Test plan:
0/ Do not execute the DB entry
1/ Clear both ExportWithCsvProfile and ExportRemoveFields prefs
2/ Execute the DB entry
3/ ExportCircHistory should not be set and the export options should not
be displayed at the bottom of the checkouts table.
4/ Remove the pref
DELETE FROM systempreferences WHERE variable='ExportCircHistory';
and reinsert the previous one, with a value:
INSERT INTO systempreferences (variable, value) VALUES
('ExportWithCsvProfile', 'something');
Execute the DB entry again
=> The now pref should be now set
5/ Export some checkouts using the CSV entry
6/ Note that the export tool and commandline script still work using the
csv format. You have to provide a --csv_profile_id option to make it
work.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We should do the same for the other check (FA exists), but cannot find a
good and quick way to implement.
Doing it this way will avoid regression later, we will no have to check
if the variable is correctly passed to the template.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When an item from Library A is reserved and set to be picked up at
Library B, the hold buttons fail to confirm or cancel during check in at
Library B when the item is transferred from Library A.
Test plan:
* Create a hold for item at Library A to be picked up at Library B.
* Check in item at Library A to trigger the transfer.
=> item shows in transit
* Switch to Library B and check in item.
* Confirm the hold.
=> item shows waiting
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes made:
- remove obsolete comment in pendingreserves.pl
- use Modern::Perl in circ/pendingreserves.pl
- get rid of unusable param run_report - followup for bug 8454
- get rid of references to hold status - followup for bug 9320
- remove unused data from SQL and reservedata structure
Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
4a) that the page does work as before
4b) there is ne "Column visibility" button in datatable toolbar
4c) the column configuration does work as expected
4d) there is new column "First patron" with link to patron which is
first in holds queue for given record
4e) sorting works ax expected
4f) filters (in teh bottom of table) work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!
https://bugs.koha-community.org/show_bug.cgi?id=18079
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
`git grep ManualLocation` does not return any results
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The GetMemberIssuesAndFines subroutine used to retrieve the issues,
overdues and fines for a given patron. Most of the time, only 1 or 2 of
these values were used.
This patch removes this subroutine and uses the new get_issues,
get_overdues and get_balance method from Koha::Patron and Koha::Account::Lines.
Test plan:
1/ Add overdues, issues and fines to different patrons
2/ On the checkout, checkin and patron search result and the patron
detail pages, these 3 informations, if displayed before this patch, must be
correctly displayed.
3/ Use the batch patron deletion tool and make sure that patrons with a
balance > 0 are not deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ignoring the pluralization or lack thereof:
$ git grep "Koha::Issue"
-- This has results.
But this was renamed by 17796, and supposedly still
in discussion in 16870.
apply this patch, and do the same git.
There will be no results.
This was found while running a prove t/db_dependent/00-strict.t
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Checkout more then one item to a borrower
3) Check one of that items
4) Note, that on in returns table there is a button with number of
outstanding issues in patron column. The button should take you to checking
out page
5) When the outstanding issues count is 0, there is no button
Signed-off-by: Radek Šiman <rbit@rbit.cz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Number of tests in Patrons.t corrected.
Method is_going_to_expired (no english!) renamed to is_going_to_expire.
Adding a negative duration replaced by a subtract. Reads easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to be consistent, we need to create this method as well.
Test plan:
Make sure the pref NotifyBorrowerDeparture works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17579 introduces a Koha::Patron->is_expired method.
Let's use it from this script.
Test plan:
Confirm that you see the message on the interface from the circulation
page for an expired patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ok I am silly, we needed to replace to use the cache mechanism for
search_by_koha_field, not find_by_koha_field...
Let's create another subroutine
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds output of subtitle to the holds to pull report using
keyword to MARC mapping information.
To test, apply the patch and go to Circulation -> Holds to pull. The
list of holds to pull should display subtitles.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subtitle added using keyword to MARC mapping with default framework.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue marked as auto_renew is renewed manually, we want to display
the latest auto renew date possible.
Test plan:
1/ Define circ rules as in the previous patch.
2/ Check a item out, mark it as an auto renewal
3/ Back date the issuedate and make sure it will be too late to renew it
4/ Use the Circulation > renew page (circ/renew.pl) to manually renew
this issue.
You should get a warning "You barcode has been scheduled for automatic renewal
and cannot be renewed anymore since DATE."
If the pref AllowRenewalLimitOverride is set, you will be allowed to
renew it anyway.
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply the patch
2) Update DB structure
3) Run update_dbix_class_files.pl
4) Select patron for checking out
5) Try to add some circulation and opac messages
6) Note that now there is creator (you ;) ) shown by every message added (with link to creator profile)
7) Try to delete messages to confirm that everything works as expected
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This was the "Get" subroutine for the framework, it can be easily
replaced with a call to the Koha::BiblioFrameworks->find method.
This patch also replaces some confusing wordings (framework vs frameworkcode).
Test plan:
On the circulation home page, you should see a "Fast cataloguing" link
if the FA framework exists.
Note that the admin/marctagstructure.pl has already been tested in the
previous patch.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link pops Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the call to C4::Koha::GetKohaAuthorisedValues with
Koha::AuthorisedValues->search_by_koha_field
Test plan:
AV descriptions should be displayed on the following pages:
- XSLT view - location and ccode
- Bibliographic detail, moredetail and OPAC pages - location, ccode, copynumber
- returns - location
- opac-basket - ccode, location
- The 3 reports: catalogue_stats.pl, issues_stats.pl and
reserves_stats.pl - location, ccode
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthorisedValueByCode returned the
description (staff or opac) for a given authorised value.
Note that we may need a unique key to ->find instead of ->search.
Test plan:
- Checkin an item that cannot be checked in because it's lost, the
message should display the AV description
- Generate a letter with borrowers.streettype equals an ROADTYPE AV, the
description should be displayed.
- Edit a patron attribute type, the AV dropdown list should be
displayed
- Create the PA_CLASS AV category (see bug 7154) and make sure it
behaves as before when editing a patron
- The checkout list should display descriptions for LOC, LOST and
DAMAGED
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetAuthValCode did not return anything if the authorised_value column
was not defined. Our new calls to Koha::MarcSubfieldStructures->search
should behave the same
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthValCode returned the authorised value
category for a given kohafield.
This can be acchieve easily using a new Koha::AuthorisedValues->search_by_koha_field
method which will mimic search_by_marc_field.
Test plan:
Confirm that the description is correctly displayed on the following
pages:
- detail and moredetail of a bibliographic page (itemlost, damaged, materials)
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc.
field should be displayed.
- Items search form
- On the checkout list from the circulation.pl and returns.pl
pages, the description for "materials" should be displayed
Note that GetKohaAuthorisedValuesMapping is going to be removed on bug
17251.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetKohaAuthorisedValueLib just retrieves a description
(lib) for a given authorised value.
We can easily replace it using:
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->lib
or
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->opac_description
Test plan:
- On the detail page of a bibliographic record, the description for notforloan,
restricted and stack (?) should be correctly displayed
- View a shelf, the location (LOC) description should be displayed
- On the search result page, the location description should be displayed in the
facets
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc. field
should be displayed.
- When creating item in the acquisition module, the dropdown list for
field linked to AV should display the AV' descriptions
- On the transfers page, the description of the location should be
displayed.
- On the checkout list from the circulation.pl and returns.pl pages, the
description for "materials" should be displayed
- Fill some OPAC_SUG AV and create a suggestion, the reason dropdown
list should display the description of OPAC_SUG
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The patron search type is hard coded to 'contain' in
circ/circulation.pl.
This causes problems because a mis-scanned cardnumber can bring up the
wrong patron.
The example that our partner gave us involved scanning '1733', which
doesn't match any borrowers when we do a 'start_with' search, but
matches the cardnumber 'p291733'.
If we follow the usage in members/member.pl, we can set searchtype in
HTTP params, which is amenable to fixes in intranetuserjs
Test Plan:
1) Apply this patch
2) Use the checkout search, not changes should be noted
Extra credit:
1) Add javascript to intranetuserjs to add a hidden input named
'searchtype' with the value 'start_with'
2) Checkout searches should now give only results where a searched
field starts with the given string(s)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some librarians find it useful to know what category a patron is before
confirming a reserve or transfer from the checkin screen.
This patch adds the patron category to the hold and transfer popups
to the patron information already displayed. The li tags that contain
the patron category have the class "patron-category" to allow this data
to be easily hidden.
Test Plan:
1) Apply this patch
2) Trap a hold for a patron, note the patron category is now displayed
3) Trap a hold for pickup at another loation, note the patron category
is now displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In previous versions of Koha, if a hold canceled from the "Holds over" tab had other holds on it,
the librarian would be alerted with the message "This item is on hold for pick-up at your library"
and directed to check it in to fill the next hold. This no longer happens.
Test Plan:
1) Apply this patch
2) Find a hold that has been waiting too long
3) Cancel that hold via waitingreserves.pl
4) Note you get the message "This item is on hold for pick-up at your library"
5) Confirm the ok button redirects you to the correct tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Bob Birchall <bob@calyx.net.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When the TimeFormat system preference is set to "12 hour",
setting a filter on the due date can result in:
- no overdue loans being reported, even if there are some
that meet the criteria
OR
- overdue loans being omitted from the report if they
are due on the "until" date in the filter
This patch fixes this by replacing output_pref() with
DateTime::Format::MySQL to format the date filter values
to pass to the SQL query.
To test
-------
[1] Run the overdue report (circ/overdue.pl) and set a filter
on due date, using values that should bring up one or
more overdue loans.
[2] Note that zero overdue loans are returned (if using MySQL
5.5, 5.6, or 5.7 or MariaDB 5) or that loans due on the
"until" date are omitted (if using MarioDB 10).
[3] Apply the patch and repeat step 1. This time, the correct
set of overdue loans should be reported.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16082, 'Display a friendly "patron does not exist" message if that's the
case - circulation.pl' changed the behavior of the checkout page so that if
you hit that page with a borrowernumber which doesn't exist a nice message will
tell you so.
Now when you do that you get an error message:
Can't call method "is_debarred" on an undefined value at /circ/circulation.pl line 300.
Test plan:
confirm that the friendly message is back :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
