This patch follows Galen's suggestion in comment #7.
TEST PLAN
---------
1) Back up your koha logs as desired.
2) add something to /var/log/koha/{instance name}/intranet-error.log
3) ps aux | grep zebra
4) logrotate -f /etc/logrotate.d/koha-common
5) ps aux | grep zebra
-- the zebrasrv and daemon process for zebra indexing
didn't restart.
6) apply this patch against /usr/sbin/koha-stop-zebra
7) sudo koha-start-zebra {instance name}
8) ps aux | grep zebra
-- the processes should have started up again.
9) add different junk to /var/log/koha/{instance name}/intranet-error.log
10) ps aux | grep zebra
11) logrotate -f /etc/logrotate.d/koha-common
12) ps aux | grep zebra
-- the process ids for the zebrasrv and daemon processes should
be different, but the number of processes is the same as before.
13) sign off, because its less ugly than comment #3
Sponsored-by: Tulong Aklatan
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected, no regressions found.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Currently koha-stop-zebra will not stop zebra for disabled instances. It should
work more like koha-stop-sip, which does work for disabled instances. Also,
koha-stop-zebra is called by '/etc/init.d/koha-common stop' which clearly
should also apply to disabled instances.
To Test:
1) Disable a koha instance.
2) Run koha-stop-zebra INSTANCE. You should get message
"Instance INSTANCE disabled. No action taken."
3) Apply patch, and copy patched file debian/scripts/koha-stop-zebra
to package site over /usr/sbin/koha-stop-zebra.
4) Disable koha instance.
5) Run koha-stop-zebra INSTANCE. It should now stop zebra.
http://bugs.koha-community.org/show_bug.cgi?id=13784
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As asked by Robin, a bash lib of functions is introduced with the common
functions to be reused. Most of the scripts are modified (reduced) to
include this file and the repeated functions cleaned.
No noticeable change in behaviour should be noticed.
As I've been todl in #debian-mentors, it is used that files for inclusion
should be installed at the apps directory (i.e. /usr/share/koha/) so this
patch makes the install script put the file in the bin/ directory.
All koha-* scripts assume the file is there already (and fail otherwise).
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Apache 2.4 expects the sites definition files use the sufix '.conf'
To reproduce:
- Install the 'koha-common' package on Debian 7 or Ubuntu 13.10+
(both known to include Apache 2.4).
- Create an instance (for example testlibrary) using the supplied
commands:
$ koha-create --create-db testlibrary
> FAIL: apache reports an error like this:
"ERROR: Site testlibrary does not exist!"
This patch adds a test on the Apache version and appends the ".conf"
sufix if needed.
To test:
1st step: koha-create gets fixed:
-- The hard way --
- Apply the patch, and build the koha-common package on top of this
commit.
- Install the built package on an Apache 2.4 Debian-based distro (Debian 7
or Ubuntu 13.10 will work)
- Create a test instance:
$ koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
-- The easy way --
- Apply the patch, and copy the koha-create into an Apache 2.4
Debian-based distro
- Create a test instance using the koha-create script you just
copied:
$ ./koha-create --create-db testlibrary
> SUCCESS: no more apache sites related error.
2nd step: the rest of the touched scripts keep working as usual
koha-disable
koha-dump
koha-enable
koha-list
koha-remove
koha-restart-zebra
koha-stop-zebra
koha-start-zebra
They should all keep working. Can be tested "the easy way" too.
Note: there might be another issues regarding Apache 2.4 deployments
like the need for
$ a2enmod access_compat
and perhaps some directory permissions tweak, which I think should be
properly documented on the install instructions.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Commented out the code that checks for intance name parameters on the zebra service handling scripts.
It restores the original behaviour, while leaving error checking code.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-stop-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit: Corrected the die message
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Currently, if it attempts to stop a zebra process that doesn't exist,
the script will abort, which leaves things running. This patch prevents
it from aborting.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
