Some libraries don't wish to require librarians to confirm each hold during checkin. Instead they would like to only be alerted that a hold was filled.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref HoldsAutoFill
4) Check in an item that should be trapped for a hold
5) Note that instead of the modal asking if the hold should be filled,
instead you get a message box showing the hold was filled, along
with a button to print the hold slip.
6) Enable the new syspref HoldsAutoFillPrintSlip
7) Repeat step 4
8) Note the same behavior, but this time the print dialog displays
automatically
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The update DB entry will not remove the prefs if NorwegianPatronDBEnable
is set.
This patch could be reverted locally by people using it.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For existing installations we want to keep the current behaviour.
This patch adds the column configuration to hide the collection
column from the details and checkouts tabs until toggled.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
As requested in comment12, we can update these cases in a dbrev too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked out item, deleted issue record, ran dbrev.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The ROADTYPE category was missing from the default list of
authorised value categories available.
To test:
- Verify ROADTYPE is not listed as authorised value category
- Apply patch and run database update
- Verify ROADTYPE is now listed
- Add an entry, for example: AV = Avenue
- Add or edit a patron, verify a pull down with your entry
shows on the form.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We should correct bad data too.
This is a trivial, pragmatic approach. Instead of doing a complex
calculation with holidays etc. (as was done on 12063), we just add
MaxPickupDelay or 7 days to today probably resulting in a little bonus
time. Only for waiting holds. When the ReservesNeedReturns pref was not
Automatic, there should be no changes.
== Test plan ==
1. git checkout c585f1149770ec401f188e061211501897cec0bf~1
This the commit before bug 20724's patches.
We need that to be able to generate "corrupted data"
2. Set ReservesNeedReturns to "Automatically"
3. Place a hold on a specific item
4. The hold should have an *empty* expiration date
record page → Hold → "Expiration" column
5. Apply this patch
6. Run updatedatabase.pl
7. Refresh the page
8. The hold should have an expiration date (not empty)
9. Celebrate! 🎉🎊🥳
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Bug 20773: (followup) Remove MySQLism
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove prefs OCLCAffiliateID, XISBN and XISBNDailyLimit
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Libraries may want to hide personal patron data from the circulation
page for privacy reasons this syspref introduces that ability for
library staff to control the display of this data themselves without
having to ask support vendors to hide it for them.
Test plan:
1. View circulation page and input a patrons barcode or name
2. Notice if the patron has a phone number, email, street address and
city set then these are displayed in the left hand side of the screen
under the patrons name. Otherwise if all/any of these fields are not
set for the patron then the text: "No <datafield> stored." is
displayed.
3. Apply this patch
4. Run ./updatedatabase.pl from the Koha shell to run the atomicupdate
5. Restart memcached and plack
6. Notice a new systempreference named
'HidePersonalPatronDetailOnCirculation' has been added, which has the
default value 'Dont'
7. Without changing the default value notice the personal patron
information is still displayed on the circulation page
8. Change the value of the syspref to 'Do' and now notice the phone
number, email address, street address and city are now hidden in the
circulation page
Sponsored-By: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch addresses minor issues highlighted by QA.
- The POD is enhanced based on the proposal in bug 11983.
- The introduced offset type value is made consistent with the rest of
them.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adds translations for 2 new notices CANCEL_HOLD_ON_LOST and
CHECKOUT_NOTE.
Some small changes to older notices to match them with the
English templates.
To test:
- Install German
- Run the web installer on an empty database
- Make sure all files install correctly and there are no SQL
errors
- Check notices were loaded correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
See bug 21087 for more details.
Test plan:
Drop your DB
Start the installation process
Use the onboarding process to install missing data
The superlibrarian created during this process should be created
sucessfully and allowed to login
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There's a typo for 'locause', this should be 'localuse'.
Also, 'Credit*' is never used.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 17234 made an effort to remove the ALTER IGNORE from updatedatabase.pl so that it could work with Mysql 5.7. But new entries have since been added to it:
Bug 12395 - 18.06.00.005
Bug 19524 - 18.06.00.006
Bug 13560 - 18.06.00.008
This is corrected using column_exists to validate the existence of the new columns before ALTER
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table is removed just before, this clause is useless.
It also fixes a test:
t/db_dependent/Creators/Lib.t .. 1/645
# Failed test 'get_table_names return all tables matching'
# at t/db_dependent/Creators/Lib.t line 1258.
# Structures begin differing at:
# $got->[10] = 'aqinvoice_adjustments'
# $expected->[10] = 'aqinvoices'
# Looks like you failed 1 test of 645.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Without this patch only catalogue permission was required
for managing suggestions. This patch adds a new permission
in the acquisition module do manage suggestions and updates
staff user permissions accordingly.
To test:
- Make sure there is a pending suggestion
- Create a few users with different permission sets:
- User 1: only catalogue
- User 2: any acquisition permission
- User 3: cataloguing permission
- Check all of them can access: /cgi-bin/koha/suggestion/suggestion.pl
- Apply the patch
- Verify all of them now have the suggestions_manage permission
- Verify everything displays correctly on:
- intranet start page
- patron account in staff
- acquisition start page
- suggestion page (try to access by URL too)
- Remove suggestions_manage for a staff user
- Repeat tests above, access should be denied/links not visible
Bonus:
- Fixes the link on the acquisition start page for late orders
to mage the permissions of the page itself: order_receive
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch includes some changes required on comment 57:
1. Bad resolution conflict, permission self_checkout is re-add
2. The IGNORE modifier is missing in the INSERT statement
4. When I hit /circ/checkout-notes.pl from the side bar, the page displays "Checkout notes", nothing else. We should add "There is no checkout notes".
7. I would display the table on the confirmation screen as well
10. html filters are missing
11. span element should surround translatable string, to help translators
14. patron-title.inc must be used to display patron's info
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixing the comments in Comment 42
Ready to test
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a user permission for managing issue notes, and a 'noteseen'
column to the issues table.
To test:
1) Apply Bug 14224 first
2) Apply this patch, update database, rebuild schema.
3) Restart koha-common and memcached
4) Turn on AllowCheckoutNotes syspref if haven't already
5) Issue two items to two different users (one item each)
6) Log into the OPAC as one of the users and add an issue note to their
issue
7) Log out and log back into the OPAC as the other user
8) Disable Javascript
9) Refresh opac-user.pl
10) Leave a checkout note on their issue
11) Enable javascript and log into the Staff Client as a superlibrarian
user
12) Go to your user's account and edit their permissions to have
everything ticked EXCEPT circulate->manage checkout notes.
13) Go to main intranet page. There should be no message saying
'checkout notes pending'.
14) Go to circulation home page. There should be no link to Checkout notes.
15) Go back to user's permissions and tick circulate->manage checkout notes.
16) Go back to main intranet page. There should now be a message at the
bottom saying 'Checkout notes pending: 2'
17) Go to circulation home page. There should be a link to Checkout notes
with a 2 next to it. Click this link
18) Attempt to mark an checkout note as seen. This should update the status
of the checkout note to 'seen' and disable to 'mark as seen' button while
enabling the 'mark as not seen' button.
19) Test both buttons with both issues.
20) Test select all and clear all buttons
21) Confirm that buttons at the bottom are only enabled if a checkbox is
checked
22) Try selecting both issues and using the buttons at the bottom to
mark multiple issue notes at once.
23) Confirm the barcode link to the item works as expected.
24) Confirm the cardnumber link to the user works as expected.
25) Confirm all table details show correctly.
Sponsored-by: Catalyst IT
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove self-checkout permissions
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some libraries are paperless and require all payment receipts to be emailed. Koha should give libraries the option to send email receipts if a patron has an email address. If a notice for the type of "credit" exists ( payment or writeoff ), then an email receipt will be sent.
These notices only support Template Toolkit syntax.
Test Plan:
1) Apply this patch and dependencies
2) Add the two new notices, you can find them in installer/data/mysql/en/mandatory/sample_notices.sql
3) Note two new notices exist in the notices editor, ACCOUNT_PAYMENT and ACCOUNT_WRITEOFF
4) Find or create a patron with an email address that owes some amount of money
5) Make a payment for one or more fees
6) Note a new email is queued for the patron
7) Make a writeoff for one or more fees
8) Note a new new email is queued for the patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Move to aqinvoice_adjustment
Move to Koha::Acquisition::Invoice::Adjustments
Test if variable exists before count
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the ADJ_REASON authorised value category tot he atomic
update, and fixes code to display a hint of no reasons are defined
other minor updates to remove warns in logs
To test:
Apply patches
Run updates
Check authorised value categories to see ADJ_REASON exists
Add an adjustment, not you have no reaosn drop down
Note there is a hint if you hover
Add a value to ADJ_REASON
add another adjustment, note you can now add reasons (or not)
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At the moment staff users need parameters or parameters_remaining_permissions
in order to be able to change exchange rates for acquisition orders.
This patch adds a new separate permission currencies_manage and
updates staff users currently having those permissions to get the
new permission as well.
To test:
- Create some staff users with different permission sets
1) superlibrarian
2) parameters
3) parameters_remaining_permissions
4) manage_circ_rules, but not parmeters_remaining_permissions
5) all acquisition permissions
- Apply patch and run database update
- Verify new permission has been added and staff users updated
1) remains the same
2) + 3) will have currencies_manage
4) remains unchanged, doesn't have new permission
5) remains the same, will have access now because of having
the top level acquisition permission
- Verify the changed pages work correctly:
- navigation on admin home page
NOTE: the acquisition parameters section will now honor all
different related permissions (edi_manage, budget_manage,...)
- navigation on acquisition home page
- try to access currencies page directly
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
New MySQL column: aqorders.createdby
Creator's name is displayed on order's receive pages (acqui/orderreceive.pl
and acqui/parcel.pl)
On acqui/orderreceive.pl it replace the name of basket's creator
On acqui/parcel.pl, to avoid adding more data in the table of pending
orders, it is shown in a popup like MARC and Card views
Test plan:
1/ Run updatedatabase.pl
2/ Create a new order and go to the receipt page (acqui/parcel.pl)
3/ Click on "Order" link in column "More" (previously "View record")
4/ A javascript popup should appear with your name in it. Close the
popup.
5/ Click on "Receive" link
6/ Your name should appear in front of "Created by" label, to the right
of the page.
Patch updated with use of atomic update.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new offset type 'Manual Credit'. And adds an atomic
update for fixing existing offsets.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This bug add update 26 changes.
Update 26
http://www.loc.gov/marc/bibliographic/bdapndxg.html
New subfields 377$3, 380$3, 381$3, 383$3, 730$4
Codes
Map 007/04 'x' new
Map 007/06 'c' renamed
No auth changes
To test:
1) Apply Bug 19835
2) Apply this patch
3) Reload marc21 bibliografic frameworks, check loads ok
4) Clean your browser cache
5) Edit a new bib record, fire 007 plugin,
for Map, 04 position, check new 'x'
for Map, 06 position, check renamed 'c'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A follow-up in line with bug 20710.
Again, the files used here have been generated automatically
from the po files on translate.koha-community.org.
To test:
- Make sure the de-DE installer can install all mandatory files cleanly.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using de-DE installer, all files load Ok
No errors
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Translation of bibliographic and authority frameworks can be done
using translate.koha-community.org.
Updated and translated files will then be provided for download.
See: http://lists.koha-community.org/pipermail/koha-translate/2018-April/002721.html
To test:
- Verify SQL is correct and frameworks load without problem
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In some places - was used insted of --, changed for
consistency with existing descriptions.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This followup updates revison number and date
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This followup fixes all repeatability cases, from
updates 23+24+25 and a few older ones.
To test:
0) Apply both patches
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check repeatability...
Bibs and auth frameworks checked against LOC description.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There are a bunch of updates, summary below
1) Update 23
1.a) Bibs
New fields: 647 885
New subfields
e in 752
0 in 257 377
3 in 382
4 in 752
Changes
028 redefined
a renamed in 028
b renamed in 046
d renamed in 046
1.b) Auth
New Fields: 075 147 447 547 677 747 885
New Subfields: 0 in 377
2) Update 24
2.a) Bibs
New subfields
b in 567
g in 340
i in 370 386
0 in many fields
2 in 567
3 in 370
4 in 370 386
Changes
g renamed in 370
4 'Relationship code' -> 'Relationship' many fields
4 'Relator code' -> 'Relationship' many fields
2.b) Auth
New subfields
i in 370 386
0 in 050 052 053 055 060 065 070 080 087
3 in 370
4 in 370 386
Changes
g in 370
4 'Relationship code' -> 'Relationship' many fields
4 'Relator code' -> 'Relationship' in 371
3) Update 25
3.a) Bibs
New fields: 758
New subfields
r in 777
u in 777
z in 777
1 in many fields
Changes
d renamed in 111 611 711 811
s repeatable in many fields
3.b) Auth
New subfields
1 in many fields
Changes
d in 111 411 511 711
s repeatable in many fields
For more detail:
Update 23
bibs https://www.loc.gov/marc/up23bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/up23authority/adapndxf.html
Update 24
bibs https://www.loc.gov/marc/up24bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/up24authority/adapndxf.html
Update 25
bibs https://www.loc.gov/marc/bibliographic/bdapndxg.html
auth https://www.loc.gov/marc/authority/adapndxf.html
To test:
1) Remove all your frameworks
2) Check mandatory bibliographic and authority files load without problem
3) Check new fields/subfields
Repeatability checks on followup
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 20073: Move Elasticsearch yaml files back to admin directory
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::Number::Format->round use Number::Format->round with a precision=2
We should use it directly instead of Koha::* modules. It will avoid the
DB entry to fail because schema changes.
From the koha-devel list:
http://lists.koha-community.org/pipermail/koha-devel/2018-June/044608.html
16.06.00.042
Upgrade to 16.06.00.041 done (Bug 14629 - Add aggressive ISSN matching
feature equivalent to the aggressive ISBN matcher)
DBD::mysql::st execute failed: Unknown column 'me.p_sep_by_space' in
'field list' [for Statement "SELECT `me`.`currency`, `me`.`symbol`,
`me`.`isocode`, `me`.`timestamp`, `me`.`rate`, `me`.`active`,
`me`.`archived`, `me`.`p_sep_by_space` FROM `currency` `me` WHERE (
`active` = ? )" with ParamValues: 0=1] at
/usr/local/share/perl/5.24.1/DBIx/Class/Storage/DBI.pm line 1836.
DBIx::Class::Storage::DBI::_dbh_execute(): Unknown column
'me.p_sep_by_space' in 'field list' at
/inlibro/git/koha-csf-prod-inlibro/Koha/Objects.pm line 209
Basically, the update code uses Koha::Number::Price, which in full
modern object mode goes for its newly added *p_sep_by_space* _in the
18.05 code_. But the DB doesn't have it yet (it comes with 17.12.00.022).
Signed-off-by: Blou <philippe.blouin@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
After review of the code it turns out that the management permission
that has been marked as deprecated a long time ago, does not have
any function.
The patch removes all remaining code related to it.
To test:
- Make sure you have a patron with the management permission
- Apply patch
- Run database update
- Check everything still works as expected
Bonus:
borrowers.flags is recalculated for patrons with management
permission.
To check:
- Create some 'permission twins' with and without management
permission
- Note the value in borrowers.flags
- Apply patch, don't run database update
- Save permissions from GUI for one of the twins
- Note the newly calculated value
- Run database update
- Now both twins should have the same borrowers.flags value
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The permissions for acquisitions were not very clearly described.
This patch changes the descriptions in the include file (GUI) and
in the default SQL.
To test:
- Go to any patron account in staff
- Go to more > permissions
- Verify that the meaning of each acquisition permission is clear
from the description
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was once an ILS from New Zealand
They said "How hard could it be?" and
So we all came together
To help make it better
Come join us! The adventure will be grand!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This reverts commit f489d2034b.
This commit breaks the install process when using debian packages.
Reverting as we are very close to the 18.05.00 release
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The RoutingListAddReserves feature currently doesn't work as
expected (see bug 2894) and should be turned off for new
installations until properly fixed.
To test:
- Run the web installer
- Confirm that RoutingListAddReserves is set to "Don't place"
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Extended patron attributes are a very useful feature that should be
more obvious. We should activate them by default for new installations.
For testing:
- Run the web isntaller on an empty database
- Check that after installation ExtendedPatronAttributes is turned on
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the OPAC interface for API keys management work
with the new lib. Verify all actions work for a logged user.
Users without login should be redirected to an error page.
The AllowPatronsManageAPIKeysInOPAC syspref is added to control if the
OPAC feature is enabled or not.
To test:
- Verify the syspref works
- Verify users can manage their API keys
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch changes the table structure adding fields usually found on
this kind of api management pages.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This introduces the concept of API keys for use in the new REST API.
A key is a string of 32 alphanumerical characters (32 is purely
arbitrary, it can be changed easily).
A user can have multiple keys (unlimited at the moment)
Keys can be generated automatically, and then we have the possibility to
delete or revoke each one individually.
Test plan:
1/ Go to staff interface
2/ Go to a borrower page
3/ In toolbar, click on More -> Manage API keys
4/ Click on "Generate new key" multiple times, check that they are
correctly displayed under the button, and they are active by default
5/ Revoke some keys, check that they are not active anymore
6/ Delete some keys, check that they disappear from table
7/ Go to opac interface, log in
8/ In your user account pages, you now have a new tab to the left "your
API keys". Click on it.
9/ Repeat steps 4-6
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It implements only the "client credentials" flow with no scopes
support. API clients are tied to an existing patron and have the same
permissions as the patron they are tied to.
API Clients are defined in $KOHA_CONF.
Test plan:
0. Install Net::OAuth2::AuthorizationServer 0.16
1. In $KOHA_CONF, add an <api_client> element under <config>:
<api_client>
<client_id>$CLIENT_ID</client_id>
<client_secret>$CLIENT_SECRET</client_secret>
<patron_id>X</patron_id> <!-- X is an existing borrowernumber -->
</api_client>
2. Apply patch, run updatedatabase.pl and reload starman
3. Install Firefox extension RESTer [1]
4. In RESTer, go to "Authorization" tab and create a new OAuth2
configuration:
- OAuth flow: Client credentials
- Access Token Request Method: POST
- Access Token Request Endpoint: http://$KOHA_URL/api/v1/oauth/token
- Access Token Request Client Authentication: Credentials in request
body
- Client ID: $CLIENT_ID
- Client Secret: $CLIENT_SECRET
5. Click on the newly created configuration to generate a new token
(which will be valid only for an hour)
6. In RESTer, set HTTP method to GET and url to
http://$KOHA_URL/api/v1/patrons then click on SEND
If patron X has permission 'borrowers', it should return 200 OK
with the list of patrons
Otherwise it should return 403 with the list of required permissions
(Please test both cases)
7. Wait an hour (or run the following SQL query:
UPDATE oauth_access_tokens SET expires = 0) and repeat step 6.
You should have a 403 Forbidden status, and the token must have been
removed from the database.
8. Create a bunch of tokens using RESTer, make some of them expires
using the previous SQL query, and run the following command:
misc/cronjobs/cleanup_database.pl --oauth-tokens
Verify that expired tokens were removed, and that the others are
still there
9. prove t/db_dependent/api/v1/oauth.t
[1] https://addons.mozilla.org/en-US/firefox/addon/rester/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This squash contains all of these commits:
- Adds a page to access log files on the server from the intranet
- Update ID to allow for permalinking
- Rename config to "'accessdir' and fix qa
- Allows for multiple directories to be accessible
- Update the link under reports
- (Follow-up) Fixing merge error and cosmetic changes
- (Follow-up) Fix tab chars and move javascript to the footer
- (QA Follow-up) Fix datatable
- Make filename unicode-proof, renamed accessdir to access_dir and fix update
Test plans:
- Apply patch, update database
- Add to koha-conf:
<access_dir>/tmp/koha-public/one</access_dir>
<access_dir>/tmp/koha-public/two</access_dir>
<access_dir>/tmp/koha-public</access_dir>
- Create these directories ( mkdir /tmp/koha-public , etc...)
- Create these files:
echo "hello world!" > /tmp/koha-public/❤
echo "test" > /tmp/koha-public/one/samename.txt
echo "this is not the same" > /tmp/koha-public/two/samename.txt
- Login as Superadmin, go to tools > reports files
- Click on ❤, make sure it's downloadable and readable
- Click on both samename.txt, look inside and make sure the file is different
- Login as NON-superadmin. Go under tools, see no Report/Log under the third column
- Go to add tools/access_file permission to user
- See new entry under tools third column.
- validate link is ok.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Default value of AutoMemberNum is now 0.
TEST PLAN:
0. Do a fresh install of Koha
1. In system preferences AutoMemberNum should be off
2. No warning should be shown next to the cardnumber field in the patron creation form.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As per RM request, changing the shorter name to its full form.
Result of a git grep | sed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No occurrences to be found anymore with git grep -i.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This pref allows you to block changes to superlibrarian privileges at
client and server side for non-superlibrarians.
This patch only contains the db rev and the preference description.
Test plan:
Run dbrev or new install. Check pref value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: JM Broust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"RELATIONSHIP TO ISO 639-2
ISO 639-2 (Codes for the representation of names of
languages-- Part 2: alpha-3 code) was based on the MARC
Code List for Languages and published in 1998. In the 22
cases where the ISO 639-2 list has two alternative codes,
the bibliographic code is the same as the MARC code."
(http://www.loc.gov/marc/languages/introduction.pdf)
This leads me to believe that eus, mri, and sqi are
incorrect. The slk code was corrected on an earlier bug.
TEST PLAN
----------
Apply patch
Do a database upgrade
-- Are eus, mri, and sqi fixed?
reset_all
-- Are eus, mri, and sqi never there in the first place?
koha qa test tools only check perl code.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates iso639_2_code value for Slovak language
Test plan:
1) Obtain a biblio record having 'slo' value in its language
code (marc field 041a)
2) Try to find it through Advanced search + more options
with language set to Slovak
3) Nothing is found
4) Apply this patch
5) Repeat steps 1 and 2
6) Record is found now
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that these patches should be pushed along with bug 19984 to avoid
regressions (if the syspref is changed between the 2 update DB entries)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The goal to this enhancement is to add the ability to cancel a hold and
mark items as lost from the 'Holds to pull' page.
A new pref is added to control the behaviour, default is off
To mark items as lost you need to set the new pref CanMarkHoldsToPullAsLost to one of these two values:
- "Allow to mark items as lost"
=> The item will be marked as lost and the hold will be cancelled
- "Allow to mark items as lost and notify the patron"
=> Same as previously but the patron will be notified as well.
The notification is done using a new notice template (code=CANCEL_HOLD_ON_LOST).
Feel free to suggest another default wording.
To update the values of the items when one of these 2 buttons are used, you need to
fill the UpdateItemWhenLostFromHoldList with something like: 'itemlost: 1'
Test plan:
1/ Place holds on some items
2/ Go to Home > Circulation > Holds to pull
From here you can cancel the hold or
3/ Mark the items as lost
=> You will receive feedback messages depending on different situations:
* The CANCEL_HOLD_ON_LOST does not exist
* The patron does not have an email address (but the notice has been
enqueued! It is the current behaviour with other notices)
* The notice has been enqueued
* The hold has been cancelled
QA Notes:
From which library do we want to pick the notice? This patch use
reserves.branchcode
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The multiple select saves the selected values with a comma.
Furthermore, preferences.pl also splits on a comma. In other words, the
upgrade will not work with the bar character. All options will be
deselected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Given the confusion regarding this behaviour it sounds better to make it
configurable.
This pref will take 4 different values, 1 per place an item can be
marked as lost.
Test plan:
Mark items as lost and confirm the item is returned or not, depending on
the value of the system preference.
- from the longoverdue cronjob (--mark-returned takes precedence if set)
- from the batch item modification tool
- when cataloguing an item
- from the items tab of the catalog module
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We've had the ability to 'reverse' a payment for a long time, but it
would be much better if we had a true void payment function that
replaces the paid amounts into the fee so that it appears as if the
payment was never made.
Test Plan:
1) Apply this patch and dependent patches
2) Run updatedatabase.pl
3) Create some fines
4) Pay those fines
5) Use the new 'void' button to void the payments
6) Note the fines were restored to their pre-payment amounts
Signed-off-by: Koha-us conference <koha-us@koha-us.net>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The update will
- change the RLIST notice code to SERIAL_ALERT
- adapt the description if it has remained unchanged from
'Routing List' to 'New serial issue'
- update subscriptions to use the new notice code
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The RLIST sample notice is used to send an email to patrons who have
subscribed to be notified when a new issue for a subscription arrives.
This is a feature that is totally independent and not related to the
use of routing lists. In the GUI however, this was misleading so far.
- Rename RLIST to SERIAL_ALERT and fixes the sample notices
- Fix explanations in the helf files
- Fix name of the module in letters from 'serials (routing list)'
to 'serials (new issue)'
Note: There is no logic to be changed as the notice template
to be used is defined for each subscriptions and this is just
the sample notice. I've also opted against a database update, to not
interfere with existing installations, reports etc.
A patch to the manual will be submitted shortly after this passes QA.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a new system preference MarcFieldDocURL. Setting it to some URL
will make all the MARC documentation links point to that in
the MARC edit UI. Leaving the value empty will use the old defaults
(http://loc.gov for MARC21 and http://archive.ifla.org for UNIMARC).
There are some possible substitutions usable in the URL:
- {MARC} is replaced with either "MARC21" or "UNIMARC"
- {FIELD} is replaced by the MARC field number, eg. "000", "048", ...
- {LANG} is replaced by the UI language, eg. "en", or "fi-FI"
To test:
1) Go to Cataloguing > New record
2) Clicking on the question mark links in the MARC edit will
open a window to either loc.gov or archive.ifla.org
3) Install patch, run updatedatabase, etc
4) Redo parts 1, and 2.
5) Set the value of MarcFieldDocURL to
http://example.com/?field={FIELD}&marc={MARC}&lang={LANG}
6) Redo parts 1 and 2
7) Clicking on the question mark links in the MARC edit will
open a window to example.com, with the proper substitutions
in the URL for the field, marc flavour and language
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset allows for use of a separate Novelist profile for the
staff client and opac. This allows Novelist to determine links and
special styling for each. Testing is best with novelist credentials,
however, confirming that values are set and used correctly and nothing
is broken should suffice.
To test:
1 - Apply patches
2 - Update database
3 - View detail pages for some records on opac and staff client and ensure no changes have been
made
4 - Enable NovelistSelectStaffEnabled (and enter or have info in the Profile and password)
5 - Set NovelistSelectStaffView to 'above'
6 - View detail pages for some records, verify that if novelist info is
available it is displayed and nothing is displayed if not
7 - Repeat with all staff view options
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Including:
[1] Atomic update to add pref for existing installs
[2] Add new pref to sysprefs.sql for new installs
[3] Add description to authorities preference file.
Test plan:
[1] Run new install or upgrade to add pref.
[2] Check value of pref via System preferences in staff interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the possibility to define default indicators in
the MARC frameworks. It adds 2 columns in the marc_tag_structure table in
the database in order to accomplish this. All files that reference this
table have also been updated to reflect these added fields.
Test: Add or edit a MARC framework. In the Field list should be 2 extra
columns. It should be possible to add default indicators (1 character)
in these fields. Nothing else should have changed in the meantime.
The default indicator values are not yet visible in the cataloguing module.
The default values are also loaded in the cataloguing form.
Test: Define default values in some MARC framework. Go to cataloguing
and create a new record using this framework. Verify that the defined
defaults are visible when set. Verify the default is empty (as before)
if no default was set. Verify that if the default is changed, the
record is saved with the manually changed value. Verify that upon
changing such a new record, the manually set indicator value is used
and not the default one from the framework.
Don't forget to run database and database schema update
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes for other frameworks
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ACQ MARC framework is only used for the ‘Item’ block.
This patch add the ability to define biblio fields (!= 995 or 952) to
customize the display of the bibliographic details when ordering.
This new feature is controlled by a new pref:
UseACQFrameworkForBiblioRecords
Test plan:
- Create a new installation to populate the ACQ framework correctly
- Set the pref UseACQFrameworkForBiblioRecords to "Use"
- Create a new order
=> You will see the lib from the ACQ framework
- Add/remove/update biblio subfields in the ACQ framework
- Create a new order
=> You should see the new subfields displayed
Note for QA: I though I would be able to refactor existing code to make
it more flexible, but it is a bit messy and lost a lot of time. I
finally decided to copy/paste the existing code. I simplified it as, I
think, we do not want the plugin, etc. like in the full biblio editor.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When ordering, the bibliographic details contain the title, author,
publisher code, publication year, isbn and series info.
To avoid regression to provide the same behaviour, we will add these
fields to the ACQ framework
NOTE: This patch makes the change only for
- en
- fr / unimarc complet
Other frameworks will be updated before to be pushed, to avoid
unecessary rebases
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch not only updates the version check, but repurposes
the perlversion parameter, so as to not have to retranslate
templates again when the version number changes after this.
The changes are very self-evident.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Apply patches
2 - Upgrade database
3 - Check the staff client login page, should be no change
4 - Add something to the preferene
5 - It should appear on the login page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In order to make this module unrelated to the SCO module, this
patch introduces the following sysprefs:
- SelfCheckInMainUserBlock
- SelfCheckInModuleUserID
- SelfCheckInTimeout
- SelfCheckInUserCSS
- SelfCheckInUserJS
It also adds a new user flag and sub-permission:
- self_check => self_checkin_module
and moves the circulate => self_checkout permission into
- self_check => self_checkout_module
Descriptions are adjusted accordingly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the database update script replacing the "pile of
poo" emoji with the "wrapped gift" emoji.
To test, apply the patch and go to Administration -> System preferences
-> Local use. Set the "Version" preference back to trigger a database
update. Go through the database update process and confirm that the
"Convert DB tables to utf8mb4" upgrade message includes a gift emoji.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added missing upgrade SQL system preference.
Corrected system preference screen message
Fixes on purge_suggestions.pl
- perlcritic friendlier
- address $PERL5LIB comment by using $PROGRAM_NAME (comment #10)
- used STDERR (comment #10)
- perltidy
TEST PLAN
---------
$ ./installer/data/mysql/updatedatabase.pl
-- should run upgrade and generate new systempreference in table
$ ./misc/cronjobs/purge_suggestions.pl --help
-- should give help with a real path used instead of $PERL5LIB.
$ ./misc/cronjobs/purge_suggestions.pl -days -1
-- should give error message as expected
$ ./misc/cronjobs/purge_suggestions.pl -days 0
-- should give error message as expected
Go to OPAC system preferences tab and check the
PurgeSuggestionsOlderThan system preference
-- message should be as expected (see comment #9)
run koha qa test tools
-- all should pass
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Moved new pref from OPAC to Acquisitions preferences.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The system preferences value is used whenever purge_suggestions.pl is called without the 'days' parameter.
This patch uses the preference description suggested by comment #9.
This version should now be cleanly applicable.
I Apply the patch
II Run updatedatabase.pl
a) Run purge_suggestions.pl without the days parameter
- validate that there is an error message
b) Run purge_suggestions.pl with the days parameter
- validate that there is no error message
c) Insert a number of days in the system variable PurgeSuggestionsOlderThan
d) Run purge_suggestions.pl without the days parameter
- validate that there is no error message
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tested per plan, all tests pass.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fixes the language description of Vietnamese according to the
bug report and adds the German translation for the language
name.
To test:
- Run the database update
- Verify that the new descriptions Tiếng Việt shows
in advanced search language pull down
- Install German translations
- Verify that the German translation 'Vietnamesisch'
shows in the pull down when German is selected.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Instead of the very laborious task of going thru all these files line by
line, I am adding a statement at the very end to correct hidden values.
Test plan:
Run a new Ukrainian install or run a few files on an empty database.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Instead of the very laborious task of going thru all these files line by
line, I am adding a statement at the very end to correct hidden values.
Test plan:
Run a new Russian install or run a few files on an empty database.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are replacing the values -5 or 8 here by 1 for the hidden field in
auth_subfield_structure.
Note that 1 is mainly used in MARC21 and -5 in UNIMARC.
Since it is a boolean, I choose here for keeping 0 and 1.
The value 8 was only used for field 942 in MARC21 files.
The value -5 was replaced in
en/marcflavour/unimarc/mandatory/authorities_normal_unimarc.sql
it-IT/marcflavour/unimarc/necessari/authority_framework.sql
pl-PL/marcflavour/unimarc/mandatory/authorities_normal_unimarc.sql
NOTE: The french unimarc files
fr-FR/marcflavour/unimarc_complet/Obligatoire/autorite_default.sql
fr-FR/marcflavour/unimarc_complet/Obligatoire/autorites_norme_unimarc.sql
fr-FR/marcflavour/unimarc_lecture_pub/Obligatoire/autorites_norme_unimarc.sql
seem to display all fields, since hidden is 0 everywhere.
Test plan:
Test a new install in one of the languages.
Or run the sql script on an empty database.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
[ Moved from 20075 to 20074 ]
Since hidden is used as a boolean, it makes more sense to save the values
0 and 1 instead of 0 and -5.
Test plan:
Test toggling between Show all and Hide all in the auth frameworks.
Run the db rev.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The hidden value is used as a boolean in authority frameworks (in contrast
with biblio framework).
It is consistent to apply the same value (-5) to all non-zero values.
Test plan:
Check if you a have 0, 1 and 8 value in hidden somewhere.
Run the dbrev.
Verify that 1 and 8 are converted to -5.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the same feature as bug 10858 for the OPAC interface:
after a search, librarians will be able to browse selected results.
The results can be selected from several pages.
By extension it is possible to add results from several pages to a list
or the cart.
When at least one result is selected, a new "Browse selected records" button
becomes usable and change the behaviour of the existing browser.
The whole feature can be turned off with the pref BrowseResultSelection.
Test plan:
- Launch a search (on the staff interface)
- Check some biblios
- Go on another page
- Check some biblios
- Come back to a page you already check results and confirm that they are
still checked
- Click on the "Browse selected records" button
- Check that you are able to browse results you had checked.
You can also:
- add them to the cart
- add them to a list
QA note: the browsers at the OPAC and the one at the staff interface are completely different
That's why the code is not mimicking what has been done on bug 10858.
The behaviour must stay the same anyway.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes two errors that slipped in the patchset.
To test:
- Create a dummy branch for testing:
$ cd kohaclone
$ git fetch
$ git checkout v17.11.00 -b dummy
- Reset your working DB
$ reset_all (y)
- Set your branch to current master
$ git reset --hard origin/master
- Update the DB
$ updatedatabase
- Update the schema files
$ kshell
k$ misc/devel/update_dbix_class_files.pl \
--db_name koha_kohadev \
--db_user koha_kohadev \
--db_passwd password
k$ exit
$ git diff
=> FAIL: There are discrepancies on upgrades
- Reset to v17.11.00 revision and DB:
$ git reset --hard v17.11.00
$ reset_all (y)
- Set your branch to current master
$ git reset --hard origin/master
- Apply this patch
- Update the DB
$ updatedatabase
- Update the schema files
$ kshell
k$ misc/devel/update_dbix_class_files.pl \
--db_name koha_kohadev \
--db_user koha_kohadev \
--db_passwd password
k$ exit
$ git diff
=> SUCCESS: No discrepancies!
- Reset to HEAD to get rid of the schema changes
$ git reset --hard HEAD
- Regenerate the schema files on top of this patch
$ dbic ; cd /home/vagrant/kohaclone
$ git diff
=> SUCCESS: No discrepancies!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds a 'damaged_on' column to store the date an item is
marked damaged, analogous to withdrawn_on and itemlost_on
To test:
1 - Apply patch
2 - Mark an item damaged via moredetail.pl (Items tab on left in
details)
3 - Note the damaged on date apears below
4 - Unmark the item, the date is removed
5 - Go to the edit items screen (from top bar 'Edit->edit items')
6 - Mark item damaged - check db or moredetails.pl to see damaged_on
date
7 - Unmark item damaged - confirm date is removed
8 - prove t/db_dependent/Items.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Library groups were added after this patchset was submitted.
This patch adjusts kohastructure.sql entry for library_groups.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Because of the 3-byte vs. 4-byte char size change in utf8mb4, altering a
column's encoding from utf8 into utf8mb4 results in this changes:
TEXT => MEDIUMTEXT
MEDIUMTEXT => LONGTEXT
The column size in the rows (the text itself goes to a separate object
storage) shifts by 1 byte, because all chars are shifted in bytes size
too, so there needs to be room for the byte-count in the column.
This is a debatable change, but the path needs to be included along with
the rest of the patchset for consistency.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch just adds an explicit index name to the search_marc_map
table. The atomicupdate on this patchset is a good example of why we
better have them.
Sponsored-by: Hotchkiss School
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Hotchkiss School
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adapts the DB structure so it uses utf8mb4 encoding and
utf8mb4_generic_ci collation.
Indexes for columns of type VARCHAR with prefix lenght higher than 191
are shortened because of the smaller max index lenght for utf8mb4
Note: please beware that testing this patchset risks your data and the
patchset includes reinitializing the DB.
To test:
- Be on the master branch
- Have a clean DB:
$ reset_all
(y)
- Apply the first patch (Unit tests)
- Run:
$ kshell
k$ prove t/db_dependent/www/search_utf8.t \
t/db_dependent/www/auth_values_input_www.t
=> FAIL: Tests fail because Koha doesn't support supplemental (UTF-8)
chars.
- Apply the rest of this patchset
- Upgrade the schema:
$ kshell
k$ perl installer/data/mysql/updatedatabase.pl
- Run the tests:
k$ prove t/db_dependent/www/search_utf8.t \
t/db_dependent/www/auth_values_input_www.t
=> SUCCESS: Tests pass!
- Now start from a clean DB
- Run:
$ reset_all
(y)
- Run the tests:
k$ prove t/db_dependent/www/search_utf8.t \
t/db_dependent/www/auth_values_input_www.t
=> SUCCESS: Tests pass!
Verify you can use emojis all over the place (MARC records, AV
descriptions, etc).
Sponsored-by: Hotchkiss School
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Field 'field_separator' doesn't have a default value
Field 'encoding' doesn't have a default value
field_separator and subfield_separator are only used for MARC csv
profiles, no need to specify a default value
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix for:
Field 'lowestPriority' doesn't have a default value
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
surname, address and city can be NULL
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since many installs may still have the additionalauthors kohafield,
this patch adds a dbrev in atomicupdate to clear it.
Test plan:
[1] Run updatedatabase. Check that you see no additionalauthors anymore
in marc_subfield_structure.kohafield.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the upgrade from 2.2 to 3.0 (some time ago already) the table
additionalauthors has been dropped. Unfortunately, a reference to this
table has not been removed from the MARC framework installer files.
This patch clears kohafield for 700$a or 200$g in 32 installer files.
Note: The reference to additionalauthors in field kohafield is silently
ignored in AddBiblio/ModBiblio since the routines _koha_add_biblio,
_koha_add_biblioitem, _koha_modify_biblio and
_koha_modify_biblioitem_nonmarc simply do not use it. You can define a
Koha to MARC mapping for a biblio/biblioitem field but if the field is not
referenced in one of those routines, nothing happens..
Also note that C4::Items::_koha_modify_item does not hardcode all fields
and will respond to a new item mapping.
Test plan:
[1] Run a new install or verify somehow that the change to these sql files
is correct.
The change is a result of: sed -i -e "s/'additionalauthors.author'/''/g"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run a new install with MARC21 and English. This includes the mandatory
file marc21_framework_DEFAULT.sql. Verified that 700$a was inserted
correctly (without additionalauthors).
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From comment 6:
"""
Can't recreate database, when creating table structure, I got:
there can be only one TIMESTAMP column with CURRENT_TIMESTAMP in DEFAULT
or ON UPDATE clause
I am on mysql 5.5.59, which is still default in jessie, more timestamp
columns are possible from mysql 5.6.5:
https://dev.mysql.com/doc/relnotes/mysql/5.6/en/news-5-6-5.html
"""
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
0000-00-00 00:00:00 is not a valid timestamp.
It will fix the installer and upgrade process
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
With this syspref enabled scanning a patron barcode into the item
barcode field during circulation will redirect you to the patron's
circulation page.
This allows circulation with only a barcode scanner.
Testing:
- Enable the AutoSwitchPatron syspref
- Navigate to a patron's check out screen
- Enter a patron barcode into the "Enter item barcode" field
Result
- Browser should be redirected to the entered patron
Signed-off-by: Joel <aloi54@live.fr>
Followed test plan, patch works as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do not actually need 2 groups, the previous feature worked for both
OPAC and STAFF interface.
The only difference was the "show_in_pulldown" feature.
Here we are going to REMOVE this feature for ergonomic reasons. We will
already have 3 features and it will surcharge the interface to add
another one. Moreover the feature will have to be applied at the OPAC
(and so will add lot of JS checks to keep data consistent: only useful
if ft_search_groups_opac is set).
Moreover it is quite easy to remove entry from the dropdown list in
JavaScript.
If people was really using this feature, we will re-add it, just let us
know.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Instead of basing the group searches on the group name, which is an
inherently touchy system, we should use the same checkbox style that
Jonathan introduced for the patron limits by group feature.
Test Plan:
1) Check to ensure existing group searches still show as they used to
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds a new feature that will allow libraries inside a
single Koha installation to restrict access to information of patrons
that
The group of libraries feature is introduced by bug 15707, see this bug for more
information.
Let's imagine that 2 groups G1 and G2 are defined and that they include 2 libraries
each G1a, G1b and G2c, G2d: logged in users attached to G1a will only see patron's
information from G1a and G1b.
To add more flexibility, a new user permission named 'view_borrower_infos_from_any_libraries'
will drive this behavior. If set, the patron will be able to see patron's information
of any libraries.
If the restriction is set, the logged in user will not be able to search, show, edit,
delete patron's information of patrons attached to groups of libraries outside his
own group.
In situations we need to refer to a patron, for holds and checkouts for instance,
and his information cannot be viewed, a text "A patron from library G1A" will be
displayed.
Considered unecessary or outside the scope of this bug report:
* The report module is not affected by this feature for obvious reasons
* The firstname and surname of guarantors, basket (acq) managers, patrons linked
to orders are still displayed.
* Log viewer: Can only be staff
* patron list: you cannot add patrons from another group of librairies, but can
see/delete from list (too much rewrite, or we can test for patron one by one?).
* "Patron card creator" tool is not impacted by this feature.
* Upload patron images is not impacted by this patch, should it be?
* Tools:
- Upload patrons
- Clean borrowers tool (This can can done easily updating Koha::Patrons->search
with Koha::Patrons->search_limited in search_upcoming_membership_expires and
search_patrons_to_anonymise but we will need to move GetBorrowersToExpunge to
Koha::Patrons first)
We can discuss these different points but will be other bug reports not to add
more complexity to this first patchset.
Test plan:
You will find a test plan in the following commit messages.
Start by creating different group of libraries and patrons with and without the
new permission. Open different browser sessions to ease the tests.
Note that all patches have to be applied to test the different test plans.
Technical notes:
For QAers (and others) a techical note will be added to the commit messages of this
patchset. I would recommend you to read them one by one to understand the different
steps of this development.
+ Special attention should be payed to the REST api changes
+ Should we restrict the logged in user to libraries from his group when
he wants to set his library (Home › Circulation › Set library)?
Signed-off-by: Signed-off-by: Jon McGowan <jon.mcgowan@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Apply this patch set
2) Note your existing search groups have been ported over to the new
__SEARCH_GROUPS__ group if you had any
3) Create the group __SEARCH_GROUPS__ if one does not already exist
4) Add some first level subgroups to this group, add libraries to those groups
5) Search the library group searching in the intranet and opac
6) Note you get the same results as pre-patch
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1/ DROP table if exists
2/ FAIL spelling
decendents ==> descendants
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The description in comment #0 is quite true, because the
scope of the $checkmodule variable is local to just the
module checking. If we change the scope, we can include the
perl check as part of the new scope, and thus properly set
its value.
As Debian Jessie, Stretch and Ubuntu Xenial all have good
versions of Perl by default, the easiest way to test this
is to:
- make sure to have some optional modules not installed.
- change the system preference 'Version' to one just under
the current version in your SQL client.
- modify the version check line to 5.030000
- restart_all and try going to the staff client.
-- This should not inform you that your perl version is bad.
- git reset hard back to origin/master
- apply the patch
- modify the version check line to 5.030000
- change the system preference 'Version' to one just under
the current version in your SQL client.
- restart_all and try going to the staff client.
-- This should trigger the patch, and you should
be informed your perl version is bad.
- git reset hard back to origin/master
- apply the patch
- run koha qa test tools
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1) Create a new installation
2) On staff go adminisation --> and search EnchancedMessagingPreferences
3) Check that it is automaticaly on allow. If it is the it has worked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended the sql statement so it only affects the http://www.scholar.google.com url
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
1)apply patch
2) go into administration --> search for OPACSearchForTitleIn
3) *click to edit*
4) look at the link and read the google scholar one.
5) check that the start link is https://scholar.google.com.
6) http://www.scholar.google is incorrect
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since the 17.05 upgrade adds the note and the sql file did not yet include
the note, we should add it when it is not there (for example new 17.11s).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by running the dbrev while there is a letter and while not.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the <<biblio.item>> in the email with
<<biblio.title>> and uses CHECKOUT_NOTE instead of PATRON_NOTE.
This patch also adds the notice to
installer/data/mysql/en/mandatory/sample_notices.sql, and updates the
PATRON_NOTE entry in installer/data/mysql/updatedatabase.pl
To test:
1) Apply patch and update database
2) View the message_queue table in mysql
3) Check out an item if haven't already
4) Go to OPAC and set a checkout note for an item
5) View message_queue table and confirm it the title is included in the
email and all instances of 'patron note' have been replaced with
'checkout note'
6) Disable javascript in browser
7) repeat steps 4 and 5 and confirm all works as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marjorie Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To display the output of the updatedatabase.pl under Plack, we redirect
the output to a temporary file, read it, then display it.
We need to open it specifying the correct encoding (utf-8).
Test plan:
1. MariaDB [koha_kohadev]> update systempreferences set value="17.1100000"
where variable="version";
2. restart plack
3. Login
4. Make the update from the interface
=> Without this patch you will see encoding issue:
Upgrade to 17.12.00.000 done (TÄ tÅia, tÄ haumatia)
=> With this patch applied you will see :
Upgrade to 17.12.00.000 done (Tē tōia, tē haumatia)
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Drop and recreate your database
2. Restart memcached
3. Go through the web installer
4. In the onboarding tool create a patron with a password of only 2 characters in length
5. Notice the patron is successfully created and no warning message is
displayed
6. Repeat step 1,2,3 and create a patron with a password of 3 characters
none of which are a uppercase letter or number and notice the patron is
successfully created and no warning message is displayed
7. Apply patch
8. Repeat steps 1,2,3 and create a patron with a password consisting of
2 characters, notice that after submitting the form the same form is
loaded again and there is a warning message at the top of the page
informing you the patron wasn't created
9. Repeat steps 1,2,3 and create a patron with a password consisting of
3 characters (all lower case) and submit the form, notice the same form
is reloaded and a warning message at the top of the page informs you
that the patron wasn't created because the password was weak
10. Repeat steps 1,2,3 and create a patron with a password consisting of
3 characters (one lower case letter, one upper case letter and one
number) and submit the form and notice this time the next form in the onboarding is displayed with the message at the top of the screen informing you that the patron was successfully created
Sponsored-By: Catalyst IT
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the acquisition frameworks (frameworkcode=ACQ) for new
installations.
It copies the 952 (MARC21) or 995 (UNIMARC) fields from the default
framework (frameworkcode='')
Test plan:
Create a new installation and make sure the ACQ framework exists.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It appears that has never worked.
Could someone confirm?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch drops the notifys table and its related code in C4::Overdues.
A second patch should remove the 2 columns notify_id and notify_level
from the accountlines table.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Squashed the last four follow-ups into one patch. Instead of adding
two routines to Koha::MarcSubfieldStructures, and instead of moving
them to Koha::Util::Dbrev, we finally ended up with converting the
code to raw SQL queries (thx Jonathan). No need to 'pollute' the git
history with all this moving around.
As Jonathan pointed out, there is a risk in using DBIx calls (with Koha
objects) while running database revisions. See also bug 17292 and
bug 19789.
I tested the resulting db revision by adding a few fields to the Default
framework and adding deviating kohafields in other frameworks. And confirm
that it works as expected.
Please read the remainder of this commit message in the light of the above:
===
The dbrev will use two new routines in MarcSubfieldStructures:
[1] get_kohafield_exceptions is used to report deviating kohafields in
the additional frameworks,
[2] sync_kohafield is used to reset kohafield in the other frameworks to
the mapping in Default.
Test plan:
Unit test and database revision:
[1] Run t/db_dependent/Koha/MarcSubfieldStructures.t
[2] Verify that your Default 100a is mapped to biblio.author. Go to another
framework and clear the mapping via mysql command line:
UPDATE marc_subfield_structure SET kohafield=NULL WHERE frameworkcode=[your_framework] AND tagfield='100' AND tagsubfield='a';
[3] Run the db revision. It should report that 100a was adjusted.
[4] Check in admin/marc_subfield_structure that your 100a is mapped to
biblio.author again in that framework.
Additional interface testing (ensuring that the changes on this report do
not interfere with multiple mappings):
[5] Make two mappings for copyrightdate: 260c and 264a. And make two
mappings for biblioitems.pages: 300a and say 300g. Toggle with some
field values in those fields in the cataloging editor and verify the
contents of biblio.copyrightdate and biblioitems.pages. The former
should contain one year (due to additional logic) and the latter should
contain A | B if both fields are filled.
Remove the mapping for 300g.
[6] Set AcqCreateItem to ordering or placing. Verify that you can still
add or receive an order as usual.
[7] Add a mapping for itemcallnumber to 952f (this should remove the one
for coded_location_qualifier). This is very unusual but serves well in
testing multiple mappings for items.
Add or receive an order (fill 952f and 952o) with same and/or different
values. Verify the contents of items.callnumber. (Check with regular
item editor; see note.)
Do a similar edit in the regular item editor.
Note: You should expect to see A | B in both 952f and 925o if both
fields are filled with a different value.
Set items.coded_location_qualifier back to 952f in koha2marclinks.
Note: When AcqCreateItem==ordering, you will not see A|B in the callno
field when adding an item on neworderempty.pl. But when you submit
the main form, addorder.pl is called. At that time an item is created
and you will see that A|B is in both fields (952f and 952o).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 19096: (QA follow-up) Move two routines out of Koha::MSS
As requested by RM, this patch moves sync_kohafield and
get_kohafield_exceptions from Koha/MarcSubfieldStructures.pm.
At this moment they are only used in a database revision; it is not clear
if they may be of use later on.
In order to keep them in a module and not remove the unit tests, this
patch adds a Koha::Util module Dbrev.pm. It is now required in the atomic
update, but could be added in a use statement in updatedatabase.pl.
Test plan:
[1] Run updatedatabase.pl
[2] Run t/db_dependent/Koha/MarcSubfieldStructures.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 19096: Use raw SQL queries instead for the update DB entry
I strongly thing we must not use C4 or Koha subroutine in the update DB
process, only sql queries.
Especially not DBIC Schema files as they will change.
For instance the update DB 17.12.00.00X is using a specific Koha::Schema::RS::MSS
representing the current schema, but in X months/years, this schema will change
and the ->search we used may failed.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 19096: Move the sql queries to the update DB entry
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Print "Field 700$a" instead of "Field 700.a" in the dbrev.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Since bug 17196, biblioitems.timestamp is not always updated after a
change in the MARC record.
We need to know the last modification time of the MARC record for some
features (like OAI-PMH parameters 'from' and 'until' for instance)
This patch only adds the missing column in biblio_metadata and
deletedbiblio_metadata
Test plan:
1. Run updatedatabase.pl
2. Verify that both tables have the new column, its value should be the
greatest timestamp value from the corresponding biblio and
biblioitems table entries
You can verify with the following SQL query:
SELECT b.biblionumber, b.timestamp as biblio_ts,
bi.timestamp as biblioitems_ts, m.timestamp as biblio_metadata_ts
FROM biblio_metadata m
LEFT JOIN biblioitems bi ON (bi.biblionumber = m.biblionumber)
LEFT JOIN biblio b ON (b.biblionumber = m.biblionumber);
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This added column names, and reformated to be a bit more readable.
This also adds this change to de-DE, es-ES, fr-CA, and nb-NO.
While there was printer_profiles for it-IT, the Italian file seems
to not use the same numbers, and does not visibly look like it needs
these changes.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a bug whereby if you open either of the
Demco label templates (loaded by the sample data) and
click "save" without making any changes you will get an
error:
Can't bless non-reference value at C4/Creators/Profile.pm
line 92.
It also fixes another minor bug in the creator sample data.
To test:
1. Install all sample data in a clean database.
2. In the label tool, edit either of the Demco label templates.
3. Save the template and observe the error mentioned above.
4. Drop and recreate the database.
5. Apply the patch.
6. Repeate steps 1-3 and note the successful save.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Panaku is a Māori word and have the meaning of "movement".
It can be used to talk about the unstable/development version of Koha.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are only using $calendar when the pref is set.
Date calculation can be moved in if-else structure.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Have/create a 16.11 instance with some waiting holds
2 - Those holds should not have an expirationdate
3 - Make sure some of the holds are waiting longer than
ReservesMaxPickupDelay
BACKUP THE DB
4 - Upgrade to 17.05 (or later)
5 - Check the expirationdate for the holds
6 - The date wil be in the future (curdate + delay)
7 - Restore DB
8 - Apply patch
9 - Run the upgrade again
10 - expirationdate should now be based on waitingdate
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* installer/data/mysql/atomicupdate/ill_tables.sql: New file.
* installer/data/mysql/kohastructure.sql: Add tables.
* installer/data/mysql/sysprefs.sql: Add sysprefs.
* installer/data/mysql/userflags.sql: Add userflags.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/admin.pref:
Add sysprefs to UI.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
