To test:
1 - prove t/db_dependent/Koha/Z3950Servers.t
2 - Load cataloging and authority home pages
3 - Verify you can add form z395 on each page
4 - Delete all z3950 servers
5 - Viery option to add from Z3950 is removed on both pages
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: simplified if-then-else around cur_field.setIndicator[12].
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use subfields in the order they are stored.
This patch removes use of an intermediate hash for storing values. Order
of subfields as obtained from authority is now preserved.
Also removes useless code that was intended to set $2 subfields
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the indicators are not controlled, blinddetail should not overwrite
what the user already entered. Very strictly seen, we could say that it
is outside the scope. But it is strongly related.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with 100 and 600 in the cataloging editor.
For 100 the second indicator should not be overwritten. For 600 it should.
Also tested "ind2:" which should blank ind2.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch does:
[1] Adds Koha::Authority->controlled_indicators (with a test).
[2] Adds a call to controlled_indicators in AuthoritiesMarc::merge.
Unit test Merge.t is extended too.
[3] Simplifies the code in authorities/blinddetail-biblio-search.pl by
calling controlled_indicators.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Run t/db_dependent/Authority/Merge.t
[3] Steps 3 to 7 for MARC21:
Create a PERSO_NAME authority with 008/11=r and ind1=3
[4] Edit a biblio and add a 600 linked to the new authority.
[5] Verify that the biblio has ind1==3 and ind2==7 and $2==aat.
(If $2 is not visible, check the metadata in biblio_metadata.)
[6] Edit the PERSO_NAME authority and change 008/11 to '|' (bar).
[7] Verify that merge updated your biblio record: $ind2==4 and $2 gone.
[8] UNIMARC: Follow the pattern from steps 3 to 7.
Create authority, link it in a biblio, check indicators (they should
be copied both). Edit authority, change indicators and verify the
merge results in the biblio record.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested PERSO_NAME and UNIF_TITLE.
For UNIF_TITLE the second authority indicator is copied to ind1 or ind2,
depending on the biblio tag involved.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- apply this patch,
- do a search that return more than 20 results,
- click on page 2,
- check that you get results,
- check other pages if possible
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We were ordering the values out of sync with the order of the mathclist
param and so causing 'entire record' and 'all headings' to be reversed
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Enable Zebra
2 - Perform an auth search
3 - note results
4 - Enable ES
5 - Repeat search, note (likely) diff results
6 - Open a record in cataloging and use the button to launch auth search
7 - Perform same search as above, note results match for eiher engine
selected
8 - NOTE: Disbale sorting for ES search - this will be dealt with in
another report
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a QA follow-up of bug 19436, submitted separately for ease of
backporting it. (The bug was not raised by 19436.)
Obviously, the number of authority servers not biblio servers should
be the key factor for showing or hiding the button for new authority
records via Z39.50/SRU.
Trivial fix.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Script authorities.pl still contains a module 2 calculation on the hidden
attribute, although it is used as a boolean.
Since -5 mod 2 == 1, it does no harm, but we better remove it.
Test plan:
Edit and save an authority. Verify that everything still works as expected.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For obvious reasons...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Although we could argue that the user should make all $9 subfields
visible, this might be a good compromise. It selectively reverts the
change from the first patch by accepting $9 subfields without checking
the hidden flag in the framework.
Test plan:
[1] Make a subfield $9 visible for some authority field.
[2] Put a value in it somewhere in authorities.pl
[3] Make subfield $9 invisible in the auth framework.
[4] Open and save the adjusted authority record.
[5] Check the marcxml of this record.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
[1.] Load the patch and make sure you have some Z39.50/SRU servers
(Administration => Z39.50/SRU servers administration)
[2.] Then go to authorities and notice that the 'New from
Z39.50/SRU' button is there
[3.] Next go to cataloging and notice that the 'New from Z39.50/SRU'
button is there too
[4.] Now make sure you have no Z39.50/SRU servers (remove the
servers)
(Administration => Z39.50/SRU servers administration)
[5.] Go to authorities and notice that the 'New from Z39.50/SRU'
button is not there
[6.] Lastly go to cataloging and notice that the 'New from Z39.50/SRU'
button is not there too
:)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I added a missing [% END %] during signoff. Hope no one minds!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subfield_loop structure should contain things like:
$VAR1 = {
'marc_subfield' => 'v',
'marc_values' => [
'form'
]
};
This patches replaces the list by an array ref to restore consistency,
although Template Toolkit does not really care. Both work.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Find or create a subject authority
2 - Define 008/11 as 's' or 'r'
3 - Add 2nd indicator '7' to main heading
4 - Open or create a bibliographic record
5 - Link to the authority created above
6 - Subfield $2 is not set
7 - Apply patch
8 - Repeat linking, subfield $2 should be set
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
[1] Replace corrosponding => corresponding
[2] Replace containts => contains
[3] Replace item_level-itypes => item-level_itypes
[4] Replace Managment => Management
[5] Replace should returns => should return
Test plan:
Note that this patch only deals with POD lines or test descriptions.
So there is nothing to test, just read the patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Patch amended by RM: The release notes should not be modified
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After the introduction of Koha::Authorities->get_usage_count with bug
9988, we can now replace the remaining occurrences of CountUsage.
At the same time we remove CountUsageChildren. This was an empty sub.
The typo get_count_usage in a subtest title is adjusted.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Perform a search on authorities-home.pl and verify that you see
plausible numbers for 'used in xx records'.
[3] Click on Details for one authority. See the same number?
[4] Do the same as in 2/3 for Authority search on OPAC.
[5] Remember the authid and enter this in the record numbers box on
tools/batch_delete_records.pl. Select Authorities and click
Continue. The next form shows a column "Used in". Do you see
the same count again?
[6] Git grep CountUsage.
You should see just one hit in a comment that can be kept in
Koha/Authorities.pm.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Internal server errors are good, user feedback is better.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tiny change: removed the obsolete 'use Koha::Exceptions'.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the following changes:
[1] Removes Default from the template list. We should not merge with the
Default framework, since it does not have a reporting tag.
[2] Rearranges the error section in the template. It is confusing to have
two error sections in this template. The error CANNOT_MOVE is not used.
The error FRAMEWORK_NOT_SELECTED is replaced by WRONG_FRAMEWORK.
[3] Do not allow to merge a record with itself.
[4] Check if the merge reference record still contains any MARC tags.
[5] Additional polishing: Simplify passing frameworks to template. Remove
an unused Koha::Authority::Types->search. Remove obsolete POD header
for functions from the script.
Test plan:
[1] Select two authorities to merge. Verify that you cannot select Default
anymore as framework for the reference record.
[2] Reproduce error WRONG_COUNT by adding another authid=999 in the URL
after you selected two authority records for merging.
[3] Remove the third authid from the URL and change the first or second
authid into an unexisting record id. You should generate an Internal
Server Error. The log should show the exception message.
[4] Merge two authorities. Deselect all MARC tags. Should trigger the
error EMPTY_MARC in the template.
[5] Select the same authority record twice for merging. Should trigger the
error DESTRUCTIVE_MERGE in the template.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If we got an authtypecode from the database and this value is not NULL
since the table column does not allow it, there is no need to call
GuessAuthTypeCode for empty string (read: Default framework) in the
sub get_from_authid.
Furthermore, we remove three Koha::MetadataRecord::Authority->new calls.
They are useless, since we do not pass a record. It just generates:
No record passed at authorities/merge.pl line 96.
Can't bless non-reference value at Koha/MetadataRecord/Authority.pm line 66.
Instead we throw an ObjectNotFound exception.
Test plan:
[1] Run t/db_dependent/Koha_Authority.t
[2] Interface will be tested in the following patches.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolves:
Use of uninitialized value $biblio_fields in scalar chop at authorities/detail.pl line 212.
Can't call method "authtypetext" on an undefined value at authorities/detail.pl line 216.
Can't call method "authtypecode" on an undefined value at authorities/detail.pl line 180.
NOTE: Some of these problems have actually been resolved now by bugs 18801
and 18811, but it is still better imo to have these checks.
Test plan:
[1] Verify unchanged behavior. Search for some authorities on authorities.pl
and click on the details of a record.
[2] Open an authorities detail page and change the authid in the URL to a
not existing number. Instead of an internal server error, you should see
a message like "The authority record you requested does not exist".
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The check is now <=-4 or >=5, but the framework uses 0 for Show all and
-5 for Hide all. (Note that sql installer scripts also use 8.)
When modifying an authority, the script also showed hidden fields when
filled, since it did not check the hidden field but only the tab field.
NOTE: The proposed solution restores consistency, but will remove hidden
fields from the MARC record.
Test plan:
[1] Set field 942a to Show all in an authority framework.
[2] Open a new record in this framework and verify that you see 942a.
[3] Edit an existing record in this framework and verify again.
[4] Set field 942a now to Hide all in this framework.
[5] Open a new record in this framework and verify that 942a is hidden.
[6] Edit an existing record in this framework and verify again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The fails in the previous test showed that we need the first three
changes here. Some final polishing in points 4 to 6.
[1] Sub merge: Refine the condition for initializing $tags_new.
A postponed 'modify'-merge (A to B) makes that $authtypefrom is not
defined when running merge later. When crossing the type boundary, we
need a new field too.
[2] Sub merge: Add condition for an empty @record_to array.
This indicates also that a field should be removed, since we should
otherwise only add a $9 subfield.
[3] Sub merge: Adjust initializing @record_from.
This change is tested by verifying a cleared subfield in the test.
[4] DelAuthority: Adding a skipmerge parameter to allow the call from
authorities/merge.pl to skip an unneeded merge.
This also prevents that the 'delete-merge' would precede the
'modify-merge' under a hypothetical race condition.
[5] DelAuthority: There is actually no need to call GetAuthority.
The subfields of the old record are not relevant in this case.
[6] Added a few POD lines to merge.
[7] Removed a trailing space in a comment line in merge.
Test plan:
[1] Run t/db_dependent/Authorities/Merge.t.
The last subtest should no longer fail now.
[2] See test plan of next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
[1] The preference was sent to HEA. We can now send both AuthorityMergeMode
as well as AuthorityMergeLimit.
[2] A comment in authorities/merge.pl is removed. Note that a subsequent
patch will modify and test the cron job.
[3] Script misc/batchRebuildItemsTables.pl temporarily enabled dontmerge.
This is equivalent to setting the mergelimit to zero.
The function defnonull is no longer needed. (If the pref was NULL,
we restore that value. Sub merge won't mind.)
Test plan:
[1] Run t/db_dependent/UsageStats.t
[2] Run misc/batchRebuildItemsTables.pl -t
This just ensures you it still compiles; the changes speak for itself.
[3] Now git grep on dontmerge.
You should only find hits in atomicupdate and misc/translator/po.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
We will need a few additional parameters for merge later on. This patch
puts the original parameters in a parameter hash.
For the same reason DelAuthority gets a parameter hash here.
Note: We remove the second parameter from the DelAuthority call in
authorities/authorities-home.pl here. It was not used and could have
presented problems in the future.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t.
[2] Run t/db_dependent/Authorities/Merge.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Good catch from Jonathan. See comment11.
Authorities detail should pass a CSRF token to authorities-home when
deleting a record without linked biblios.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Passing the token with GET is not a good way to do, but nothing quick to
replace that.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Without this patch, it is possible to delete authority records with URL
manipulation.
Like: /cgi-bin/koha/authorities/authorities-home.pl?op=delete&authid=[XXX]
Test plan:
[1] Go to Authorities. Search for some authorities (without links).
[2] Delete an authority. Should work.
[3] Apply patch.
[4] Construct an URL like above to delete another authority. Should fail.
Under Plack this results in an internal server error, the log tells
you: Wrong CSRF token.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Amended the test plan.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Original patch from Remi Mayrand-Provencher.
Amended by Marcel de Rooy (January 2017), part of omnibus bug 17908.
EDIT:
We cannot remove the ModAuthority call, since the reference record is
the result of the merge and should be saved.
Variable $overwrite is not used and can be removed.
It is not useful to postpone a merge to the cron job here, since the
old authority record is deleted. (Note that bug 9988 will address this
subject too.)
Removing the call to C4::ImportBatch::SetImportRecordStatus: Since
$recordid2 is not an import_record_id, this is useless and potentially wrong.
Removed the if statement for @errors, since it is not used at this point;
putting the result of a comparison into $error is not useful either.
Note: there is a lot of code in merge.pl around breeding that is actually
unused. Template tools/manage-marc-import.tt contains two unused blocks
final_match_link and match_link that contain a (unreachable) call to
authorities/merge.pl with parameters:
mergereference=breeding&authid=[% record_lis.match_id %]&authid=[% record_lis.import_record_id %]
It seems that this would show the records correctly, but would not merge
them correctly since that code expects two authority records.
Leaving the signoff of Mehdi since he essentially tested the merge call.
Test plan:
[1] Restart Plack and restart koha-indexer. (I had some problems related to
indexing as a result of the marcxml transition.)
[2] Go to Authorities.
Select two authorities to merge, start with two of the same type.
Make sure that both are used in a few biblio records.
Select at least one subfield from the authority to be removed for
inclusion in the authority to be kept ("reference record").
[3] Click Merge. You come back to the kept authority record.
Note: The number of attached records may not yet be updated. This depends
on the speed of koha-indexer. If you wait a bit and refresh, you should
have the correct number.
First check the authority record again for the inserted subfield.
Now check a biblio that was ALREADY attached to the reference record.
And check a biblio that was FORMERLY attached to the deleted one.
Note: See bug 17913 to see how pref AuthorityMergeMode impacts this.
[4] Try steps 2 and 3 again for a merge of two authority records that do not
have the same authority type noting the remarks below.
For instance try to merge from a CORPO_NAME to a PERSO_NAME record.
Make a change in say 040$a of the record to be deleted. And select that
field later on the merge form.
Normally, you would use the PERSO_NAME framework in the merge now.
When checking the authority record, look at 040a. When checking the
record that was linked to the CORPO_NAME, check if it contains the
PERSO_NAME authority in the correct field (say 100, 600, 700).
Signed-off-by: mehdi <mehdi@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested merging PERSO_NAME to PERSO_NAME and PERSO_NAME to CORPO_NAME.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes made on bug 15381 assumed that the authid was always set.
But if the user wants to clear the field of the authority, the script is
called with authid=0 (FIXME...)
To fix this issue, it's better to move the new calls to
Koha::Authorities->find($authid)->authtypecode
and
Koha::Authority::Types->find($authtypecode);
at the correct place
Test plan:
1. Edit a record which has a field linked to an
authority record (100a for instance).
2. Click the link which triggers the tag editor.
A pop-up window should be displayed.
3. In the pop-up window, click the "Clear field"
button.
=> Without this patch A second pop-up window opens and displays an error:
Can't call method "authtypecode" on an undefined value at /authorities/blinddetail-biblio-search.pl line 61.
=> With this patch applied the field is correctly cleared.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At the intranet, the pagination has been broken by bug 12478 (Elastic
Search). There was a confusion between the offset and the page number.
At the OPAC, it is broken since bug 2735 which has mimicked the intranet
script.
Test plan:
Search for a term which will return more than 1 page of results.
Click on the second page
=> Without this patch, the first result of the second page is the second
result of the first page
=> With this patch applied, the offset will be corrected
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This allows sorting to be configured within a field. For example, while
many values are included for search on author, sorting should only be
done on the main entry values. This permits that by have a sort value,
which can be true, false, or null. true and null are pretty much the
same, but false means that a field isn't available for sorting on. By
default (null), fields can be sorted on.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Some issues with sort order though.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The commit b5ecefd485
Date: Mon Feb 3 18:46:00 2003 +0000
had a funny description:
Added function to check if a MARC subfield name is "koha-internal"
(instead of checking it for 'lib' and 'tag' everywhere); temporarily
added to Koha.pm
"Temporarily", since 2003, everything is relative, isn't it? :)
The thing is that GetMarcStructure returns hash like
field_200 => {
subfield_a => {
%attributes_of_subfield_a
},
%attributes_of_field_200
}
The attributes for field_200 can be 'repeatable', 'mandatory', 'tag', 'lib'.
We don't want to loop on these values when looping on subfields.
Since there are just { k => v } with v is a scalar (string), it's easier
to test if we are processing a subfield testing the reference.
At some places, we don't need to test that, we are looping on values
from MARC::Field->subfields which are always valid subfields.
Test plan:
1/ Edit items using the batch item mod tool
2/ display and edit items via the cataloguing module.
You should not see any changes between before and after the patch
applied.
Tech notes:
We need to check what we are processing when we loop on 'subfields' from
GetMarcStructure, not from MARC::Field->subfields.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Bug 8064 (Merge several biblio records) change some code used in both
biblios and authorities merge tool without updating the authorities
merge tool.
This patch fixes that.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Bug 6657 modified the way C4::Biblio::TransformHtmlToMarc operates in order to
solve an issue occuring during biblio record cataloguing. But this function is
also used by authorities cataloguing, and the code in this case is irrelevante.
This followup allows to distinguish for which kind of record
TransformHtmlToMarc is called: biblio/authority.
A bug appears in authority creation without this patch in some circunstances:
when authid is linked to 001 field.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Tested with a new authority record
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Test this patch with the previous one.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
These 2 subroutines are now not necessary anymore, we can use
Koha::Authority::Types to retrieve the authority types.
This patch won't be easy to test. Indeed, a lot of file are updated.
To test it I would suggest to focus on the merge authority
You should also confirm that the authtypecode and the authtypetext
values are correctly displayed when navigating in the authority module.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The existing Koha::Authority does not use Koha::Objects and does not
exclusively deal with DB objects.
It makes much sense to move it to let the space free for a
Koha::Authority and Koha::Authorities modules based on Koha::Object.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch does the following:
[1] Adjust authorities_merge_ajax just as in bug 14588.
[2] Replace some indirect syntax for fetch GGI::Cookie.
[3] Along the way replace some new CGI's. Note that I am not aiming to
replace them Koha wide. The "fetch class" variant is less readable.
NOTE: The changes to tools/upload-file.pl and upload-file-progress.pl
are moved to report 14321.
Test plan:
[1] Run the URL authorities/merge_ajax.pl in staff.
[2] Upload a file with Stage MARC records for import.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
[1] It runs, but also before patch
[2] File uploads without problem
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We could certainly remove 1 or 2 call to CGI->new in tools/background-job-progress.pl
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch swaps the authority records according to the refenrece record selection.
To TEST:
Merge two authority records, select the second as merge reference.
The reference authority is always the first.
Apply the patch.
Repeat previous steps, the authority is now merged using the selected reference record.
modified: authorities/merge.pl
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The text for the marc field are truncated to 22 chars when displaying an
error on mandatory fields.
This limitation is useless and this patch removes it.
Test plan:
Create a mandatory subfield and set a long text (more than 22 chars)
edit or add an authority, click on save.
You should get the error displayed with the full text
Note that this patch modifies the same code for biblio.
Test plan is the same for biblio.
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the use of Koha::FrameworkPlugin in Cataloguing,
Authorities, Acquisition, Serials and Tools.
The main change is architectural: see the commit message of the previous
patch. No changes in behavior are expected, but the support of new events
may provide additional functionality in the future. Some small bugs are
resolved along the way.
The change primarily focuses on the MARC and items editor in Cataloguing.
But the MARC editor for Authorities and the item editor in Acquisition,
Serials and Tools are touched too. This commit message gives some comments
per module.
NOTE FOR CATALOGUING:
A new plugin without popup (or other click event code) now shows the title
No popup when hovering over the tag editor image. The image alerts the
user on a plugin, the title tells about its status. The noclick property
allows for further style modifications in the template. Note that a
follow-up patch will clean up the old style plugins too with the same
effect.
Some additional code in cataloging.js makes it possible to clone subfields
with plugins (although only theoretically useful). The clones use the
same javascript functions but event.data contains an updated id.
This effectively resolves bug 13306. Note that if old plugins do not use
the javascript parameter for the id but the perl variable, cloning does
still operate on the wrong field (with and without this patch set).
In the absence of report 12176 in master, it is not yet necessary to modify
additem.tt. When it gets pushed, it should be an easy rebase.
New style item plugins will no longer need an extra parameter. (The code in
the FrameworkPlugin object actually takes care of that.)
NOTE FOR AUTHORITIES:
This patch also adds class name tag_editor to the buttonDot anchors. This
effectively makes the same tag editor image appear as in Cataloguing.
Futhermore it removes the button from the tab sequence if there is no click
event (really effective after conversion to the new style, since the old
style plugins contain empty onclicks and launchers).
Both small adjustments increase consistency between auth and bib edits.
NOTE FOR ACQUISITION:
In Acquisition two scripts use an item editor, but in a different way.
The scripts addorderiso2709 and neworderempty both rely on the routine
PrepareItemrecordDisplay in C4::Items, but neworderempty creates item
blocks dynamically via an ajax call to services/itemrecorddisplay.pl.
In order to make the dynamic item blocks work with plugins, some code
changes were needed in additem.js. (Normally the event binding is done
at document ready time; now it must be done later.)
At this moment the routine in Items.pm contains the html tags, and this
makes changes to the following templates not necessary for now:
* acqui/addorderiso2709.tt
* services/itemrecorddisplay.tt
Report 13397 has been opened to address moving the html to the templates.
NOTE FOR SERIALS:
Script serial-edit relies also on C4::Items (just as in Acquisition).
This makes changes to serials/serials-edit.tt not necessary for now.
NOTE FOR TOOLS:
The current code in tools/batchMod.pl allows the use of plugins for batch
modification of items. This patch just converts that code to use the new
object. Most item plugins however may not be very useful for operating on
multiple items at once.
PERFORMANCE:
I have benchmarked build_tabs in addbiblio to see how especially the
additional processing of the javascript in the FrameworkPlugin object
would impact performance. Testing default MARC21 framework with 8 plugins
gave the following figures:
- Old situation: 851 ms
- New situation: 942 ms (+10,7%)
- New situation after plugin cleanup: 881 ms (+3,4%)
Note also that adding lines for event binding is compensated by removing
lines for unused events. Page load should essentially be the same.
TEST PLAN:
Suggestion: If you also apply the next patch with the EXAMPLE plugin, you
can test with a rather harmless plugin (with popup) on various places :)
But your test should also include old style plugins, with[out] popups.
If you want to test a new plugin without popup, rename/remove Click$id
in the javascript code of the $builder definition (temporarily).
[1] Test Cataloguing:
- Add/Edit biblio. Try plugins with and without popup.
- Add/Edit items. (EXAMPLE can be used as an item plugin with popup.)
- Clone a subfield with plugin (use EXAMPLE): Verify that the plugin
works on both original and clone with the respective field values.
Is the value put back in the right field too?
[2] Test Authorities:
Edit an authority record. Try plugins with an without popup.
[3] Test Acquisition:
Set system preference AcqCreateItem to "placing an order".
Check the item editor in the following two places:
a- addorderiso2709: Open a basket, add an order from a staged file.
Select a file, click Add orders, and go to tab Item information.
b- neworderempty: Open a basket, add an order from a new empty record.
[4] Test Serials:
Check the item editor on serials-edit. Go to subscription detail.
Click Receive. Choose "Click to add item". (Note that this subscription
should create an item record when receiving this serial.)
[5] Test Tools:
Check the item editor for batch item modification. Enter a few valid
barcodes and press Continue to reach the item editor.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=11961
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This button lets you replace existing authorities using a Z39.50 search.
http://bugs.koha-community.org/show_bug.cgi?id=11961
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce, edit, index notice with utf-8 char and search for it
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Perl issues a warning when you try to do a numeric comparison on
non numeric values. While in 99% of the caeses numeric and string
comparison behave similarly when they dont tracking down resulting
bugs is hard. Also we dont want to be logging errors for normal
operations. replace numeric == with eq
(also switched to non-interpolating quotes so we dont generate
a warning from static code checkers like perlcritic)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I can get this warnings in log files. This patch make perfectly sense.
MARC subfield code should never be tested with Perl == operator, since
the code could be letter or a number. Perl eq operator do an implicit
string conversion for value which is a number, so it will work in any
case.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes HTML code from authorities.pl
To test:
1. Check no regressions on authority editor,
new/edit/save
2. Check new line on translation files, update
a language, look for 'Tag editor'
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Checked various features of the authority edtior:
- repeating subfields
- deleting subfields
- changing the order of subfields
- linking a subfield to an authorised value
- plugins
No regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch just adjusts several POD stuff, and in a few cases
reorganizes a hash definition in order to use spaces instead of tabs
for the QA script to be happy.
Nothing important, really. This patch series just changes '.tmpl' for
'.tt'.
Regards
To+
PS beware that running the koha-qa.pl script can take lots of time on this one
:-D
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
From a biblio record, if one wants to add a 600$a information, a pop-up
appears. On this new window, on search terms typed and validated, a table
result is displayed, with a column "Get It!" allowing the selection of an
authority. From here, different cases:
1) If we have a simple authority with 200$a and 200$b subfields, a link
"choose" is displayed, working correctly.
2) If the authority has different occurences of 200$a/200$b, numeric links (1 2
and so on) are displayed, one for each occurence. In the example of my
screenshot, the line with a "Paul, Korky -- Pauline, Korkette" summary
possesses two links : "1" will add "Paul, Korky" whereas "2" will add
"Pauline, Korkette" (couldn't come up with a better name ;)).
3) If the authority has 200$x or 200$y subfields defined, several links are
also created, when it should not be the case. In our example, "Niclausse,
Paul -- Expositions" will create a link "1" for "Niclausse, Paul" and a link
"2" for "Expositions". Clicking on the 2nd link leads to the following
error: Software error: Can't call method "subfields" on an undefined value
at
/home/asaurat/workspace/versions/community/authorities/blinddetail-biblio-search.pl
line 86. Only the cases 1 and 2 should be handled. The creation of links
for subfields like 200$x or 200$y should be removed.
This problem is caused by the use of " -- " has separator of authorities with
several headings, but also in some heading between main part and subdivisions.
This patch corrects this by using an array in authorities summary so that
presentation is computed in template. I've choosen to use the pipe separator
between authorities with several headings. This may be changed to be
configurable.
Test plan :
- Edit an authority type summary : for example subject (heading on 250) :
summary "[250a][ -- 250x]"
- Create an authority A1 with one heading and a subdivision : for example a
subject : 250$a "History" 250$x "20th century"
- Create an authority A2 with several headings. for example a subject : 250$a
"History" 250$a "Legends"
- Rebuild Zebra queue
- Go to OPAC and click on "Authority search" and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Go to intranet autorities search and search on "History"
=> You will find A1 and A2 :
History -- 20th century
History | Legends
- Edit a record using this autorities type as thesaurus : for example on 606$a
- Click on thesaurus link and search on "History"
=> You will find A1 and A2 :
History -- 20th century ; 0 times ; choose ; Edit authority
History | Legends ; 0 times ; 1 2 ; Edit authority
- Click on link "2" to chosse "Legends"
=> You get "Legends" in heading field : for example 606$a
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
I can confirm the problem and the solution. I have tested the patch on a large
DB with authorities having multiples headings. There is no regression on bug
4838.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Without the patch I couldn't choose between multiple headings
in the authority plugin, but with the patch it works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes spaces in indicators which are imported when we link an
authority to a biblio record. The spaces made the indicators harder to edit
after the linking, because we had to delete the superfluous space character
before a new value could be entered.
To test:
1. Open some authority on editor, save with empty indicators.
They are saved as ind1=" " ind2=" " on auth_header tables, with spaces
2. Edit some record, link some tag with previous auth,
indicators now have a space on it (or ind1 at last)
3. Apply the patch
4. repeat 2, space is gone
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When merging authority records in librarian interface biblio records
linked to deleted authority are not being corrected (i.e. have still
old heading and orpaned link in $9).
Test plan:
1. Have two authorities in the catalogue, linked to biblio records.
2. Merge them with the new merge facility (cf. Bug 5202).
3. Have a look a the biblio record(s) previously linked to the removed
authority. It should still have the old heading AND orpaned authority
link in $9.
4. Apply the patch.
5. Refresh the test records (or use another set).
6. Repeat 1-3. Headings should be refreshed and the correct authid link
should be in $9 now.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Note: new record count on the authority record will show
after reindexing.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In biblio (or authority) record editing or creation, Bug 3727 added
an empty value to combobox for subfields using itemtype authorized values,
which is mandatory and does not have a default value. This to avoid
selecting arbitrarily the first value of the combobox.
This patch extends this behavior to normal authorized values like CCODE,
COUNTRY ...
Also, when record already exists and has a defined value for the subfield
this value will be selected in combobox so there is no need for an empty
value.
Test plan :
- In a biblio framework, set a subfield mandatory and using itemtypes
authorised values
- Set a default value for this subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the first empty value is selected
- Go to biblio framework and set a default value for the subfield
- Create a new record with the framework
=> You see the subfield with a combobox, the default value is selected
and there is no empty value
- Select an other value and save the record
- Edit this record
=> You see the subfield with a combobox, the saved value is selected and
there is no empty value
Perform same tests with a normal authorized values categorie (instead of
itemtypes).
Perform same tests with with authority creation/edition
Perform same tests with a normal authorized values categorie and authority
creation/edition
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
Fridolyn: I had a lot of difficulty understanding your test plan,
especially since the second line should not be in the test plan
(since if there is a default value, no empty value should appear).
Perhaps it would be useful to use more whitespace to separate
steps and the things for which a tester should check.
Also, it might be useful to specify what testers should check for
before and after applying the patch, so that they're sure that the
behaviour has been corrected.
In any case, the patch works! Certainly a helpful addition.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
1) Adding a bibliographic record
Subfield is mandatory, no default value:
- adding record: no value is preselected, empty value exists
- editing record: saved value is shown, empty value exists
Subfield is mandatory, defined default value:
- adding record: default is preselected, no empty value
- editing record: saved value is shown, no empty value exists
Subfield is not mandatory, defined default value:
- adding record: default is preselected, empty value exists
- editing record: saved value is shown, emtpy value exists
Subfield is not mandatory, no default value:
- adding record: empty value is preselected
- editing record: saved value is shown, empty value exists
2) Adding an authority record
Repeating tests from above.
- Subfield is mandatory, no default value: OK
- Subfield is mandatory, defined default value: OK
- Subfield is not mandatory, defined default value: OK
- Subfield is not mandatory, no default value: OK
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Perltidy and some format changes.
Most important : call to get_template_and_user must be at begining
of script because it checks authentification.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
- Tested various searches, selections now remain after
submitting the search form.
Regression testing:
- Clearing the authority from the record still works.
- Creating a new authority from the plugin page
still works.
- Autocomplete of entries still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When cataloging a field defined with a thesaurus, an authority search
popup is displayed with a search from. Once operators, values and sort
selected in this form the search can be performed. The bug is that the
values entered are kept but not the selected operators and sort.
The same bug was existing in authorities module, solved by Bug 8692.
This patch corrects the bug.
Also uses in 'sort by' options the same text as search in authorities
module : Heading A-Z (default), Heading Z-A, None.
Also removes duplicated code in auth_finder.pl :
value_mainstr => $query->param('value_mainstr') || "", ...
Test plan :
- Create a new biblio with a framework containing a field linked to a
thesaurus. For example : 600
- Click on small icon of main entry. For example : 600$a
=> You get a search form with all operators to "contains" and sort by
"Heading A-Z"
- Enter a value in each text box and perform search
=> You get a search form with values in text boxes and all operators
to "contains"
- Select "starts with" in all operator comboboxes and perform search
=> You get a search form with all operators to "starts with"
- Select "is exactly" in all operator comboboxes and perform search
=> You get a search form with all operators to "is exactly"
- Select "Heading Z-A" in sort by and perform search
=> You get a search form with "Heading Z-A" in sort by
- Select "None" in sort by and perform search
=> You get a search form with "None" in sort by
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: With both patches applied no koha-qa errors
Test
1) Original behavior is whatever selection you do before patch,
search form returns to default options
2) After patch, selection remains
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, further comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch (which is incidental to the main patches for bug 9282),
improves the AJAX authority search code by fixing incorrect contruction
of the parameters to SearchAuthorities() that led to errors like this
in the Apache log when doing auto-completion searches on "main entry"
and "anywhere" in the authority finder:
ysearch.pl: Use of uninitialized value $i in string eq ...
In the process, this patch also removes a use of the now-deprecated
Perl smartmatch operator.
To test:
[1] Verify that the main test plan for bug 9282 still works.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the auto-completion on the authority record
finder (accessed from the bib editor) so that if you do
start typing in the "Main entry ($a only)" input field, it will
return only the $a of the main heading for matching authority
records.
This fixes a problem where typing "shakes", choosing
"Shakespeare, William, 1564-1616" from the auto-completion
result list, then hitting the search button fails to bring
up results, as the dates come from the $d of the 100 field
(in MARC21).
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised.
Tested with an authority where I added my search term in $b.
The modified authority came up in main entry, not in mainmainentry.
That was the desired result.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The link on the merge reference had been wrong, and framework types
were not indicated when you were merging records of two types. This
patch fixes those problems.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
$mergereference is not always defined, so we should check it is
defined before checking its value.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When rebasing the patch for this, I accidentally moved the line
setting the mergereference when merging from breeding to *before*
I checked whether we were merging from breeding. Needless to say,
this caused problems. This patch fixes that, and:
* Makes the error translatable.
* Adds a missing authtypesloop argument for the template.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Due to massively incorrect data in the default authority frameworks,
we were getting warnings about undefined values and spaces from checking
which tab subfields/fields were displayed in. This patch eliminates those
warnings.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gives Koha the ability to merge authority records using the
same interface used by bibliographic records, though slightly different
methods for selecting which records to merge. The two ways to select
records are as follows:
1) Records can be selected from authority search results by clicking
the "Merge" link for two records.
2) Authority records can be merged from the reservoir by clicking the
merge-related links in the Manage staged MARC batch screen.
To test:
1) Apply patch.
2) Do a search for an authority record that will turn up multiple
identical records (or at least two records that you don't mind
merging).
3) Click the "Merge" link for the first record.
4) Click the "Merge" link for the second record.
5) Choose which fields from which record you want to appear in the
resulting record.
6) Confirm that those are the fields that exist in the resulting record.
7) Stage an authority record (for example, an authority record you
saved from your catalog.
8) Search for a record to merge with it using the "Search for a record
to merge in a new window" link.
9) Merge these records, confirming that the resulting record (after
going through the entire merging process) matches your expectations.
10) Set up a matching rule for authorities, and export an authority from
your catalog that will match based on that rule. For MARC21, the
following is a good choice for a rule:
Matching rule code: AUTHPER
Description: Personal name main entry
Match threshold: 999
Record type: Authority record
[Match point 1:]
Search index: mainmainentry
Score: 1000
Tag: 100
Subfields: a
11) Stage the record you just exported, choosing the matching rule you
just created.
12) Merge the record using the "Merge" link, confirming that the
resulting record (after going through the entire merging process)
matches your expectations.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It should be possible for staff client users to search and view
authority records even if they don't have permission to edit them.
To test, apply the patch and view the staff client as a user with and
without "editauthorities" permission.
With "editauthorities" permission, authority search results should show
both an edit and delete link. Viewing the details of an authority
record, one should see a toolbar with edit/delete/new options.
The detail view has been altered to use the term "record" in place of
"biblio" ("Used in X record(s)).
Without "editauthorities" permission, authority search results should
show no edit or delete link. Viewing the details of an authority, the
only option shown in the toolbar should be "Save."
On the staff client home page and in the header's "More" menu the link
to the authorities module should now appear with and without permission
to edit authorities.
This patch also corrects the permissions in the authority export script
to allow saving of authority records by users who do not have permission
to edit.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With this patch Koha should correctly copy indicators
(and create $2 subfield in MARC 21 if need) from the chosen authority
record to the edited bibliographic record (according to discussion in
bugzilla). UNIMARC and MARC 21 flavors are covered.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: work as described, testing in comments 9 and 12.
No errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests. Tested functionality repeating
some of the tests noted by Bernardo - checking mostly 1xx, 490,
and 7xx.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In current implementation (mostly commented out in this patch)
uses heuristic to guess which strings need decoding from utf-8
to binary representation and doesn't support utf-8 characters
in templates and has problems with utf-8 data from database.
With this changes, Koha perl code always uses utf-8 encoding
correctly. All incomming data from database is allready
correctly marked as utf-8, and decoding of utf8 is required
only from Zebra and XSLT transfers which don't set utf-8 flag
correctly.
For output, standard perl :encoding(utf8) handler is used
so it also removes various "wide character" warnings as side-effect.
Test scenario:
1. make sure that you have utf-8 characters in your biblio
records, patrons, categories etc.
2. try to search records on intranet and opac which contain
utf-8 characters
3. install language which has utf-8 characters, e.g. uk-UA
dpavlin@koha-dev:/srv/koha/misc/translator(bug_6554) $
PERL5LIB=/srv/koha/ perl translate install uk-UA
4. switch language to uk-UA and verify that templates
display correctly
5. test search and Z39.50 search and verify that caracters
are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I followed the test plan, adding utf-8 characters to library names,
patron categories, titles, and authorized values. I tried the uk-UA
translation and everything looked good.
When performing Z39.50 searches for titles containing utf-8 characters I
got results which were still occasionally contaminated with dummy
characters [?] but I assume this is Z39.50's fault not the patch's.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Already signed, add mine.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New Authority system preference created UNIMARCAuthorityField100 with default value "afrey50 ba0".
AuthoritiesMarc.pm uses the system preference instead of label "afrey50 ba0".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, all tests and QA script pass.
1) Check system preference is created correctly.
2) Change pref.
3) Catalog a new authority.
4) Change framework to make 100 show in frameworks or check in the
the database, that now 100 has the new defined value.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Passed-QA-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Although fields in the authority editor should support thesaurus
control, they should never be locked, as authority records commonly
refer to other records that may not be in use locally (and therefore
might not be in the authority file).
Test plan:
1) Make sure a 5xx field in one of your authority frameworks is
thesaurus-controlled.
2) Note that you cannot edit the field directly.
3) Apply patch.
4) Note that you can now edit the field irectly.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This commit adds support for displaying authority hierarchies for all
flavours of MARC, not just UNIMARC. Display now uses the jQuery
jstree plugin, selected with the help of Owen Leonard, resulting in a
much faster experience for users.
Be aware that the jstree file uses tabs rather than 4-space indentation,
which I left as-is so as to make it easier to integrate upstream
releases in the future.
To test:
1) Enable the AuthDisplayHierarchy syspref
2) Create authority records with a hierarchy of see also fields
(in MARC21/NORMARC, you'll be using 5xx fields for this, with a
subfield $w=g for broader terms and subfield $w=h for narrower
terms)
3) View the authorities in the OPAC, noting the hierarchical view at
the top of the page.
This initial patch does not create bidirection linkages from
unidirectional links in MARC21 authorities. This means that when moving
up the authority hierarchy, lower levels will disappear. This is
intentional, as the first patch is intended merely to ensure that
AuthDisplayHierarchy functions the same for all marcflavours. A future
patch will add a cron job to generate the bidirectional linkages, once
we are sure that the hierarchy functionality for UNIMARC and
MARC21/NORMARC coexists peaceably.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Resolved conflicts in updatedatabase.pl, sysprefs.sql and in one of
the CSS files.
Test plan:
1) Run t/AuthoritiesMarc.t
New tests complete without any errors.
2) Make sure updatedatabase works correctly.
Update works nicely, new system preference is also added to syspref.sql
3) Make sure new terms are translatable.
Created new po files for de-DE and checked for new terms.
All translations appear correctly.
4) Make sure everything works with AuthDisplayHieararchy OFF
- Add authority
- Edit authority
- Delete authority
5) Test feature with AuthDisplayHieararchy ON
- Add authority
- Edit authority
- Delete authority
6) Add a couple of hierarchically linked authorities
Note: links have to be created in both directions
Example:
151 $aGermany
551 $a Baden-Württemberg $w h
151 $aBaden-Württemberg
551 $a Konstanz $w h
551 $a Germany $w g
151 $aKonstanz
551 $a Baden-Württemberg $w g
551 $a Fürstenberg $w h
551 $a Paradies $w h
151 $a Fürstenberg
551 $a Konstanz $w g
151 $a Paradies
551 $a Konstanz $w g
Tree shows up nicely above the authority record
- in staff
- in OPAC
- on the normal view tab
- on the MARC view tab
7) Checking the logs for warnings
- no Javascript errors or warnings
- no warnings or errors in log files
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The correct tab is now visible on load. The problem with authtypecode
showing up in the search box is specific to UNIMARC, so I could not
check that it was gone, but I am comfortable signing off on this.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
We didn't notice this one with jcamins when we fixed this bug.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Do not automatically populate $9 in bibliographic headings when the
$9 is set in the authorized heading field of the authority record.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In addition to the work in bug 8207 that enables auth_finder use, it
would be very useful when creating authorities to have the auth_finder
plugin automatically fill out the relationship information in $w (in
MARC21).
To test (note that you must either apply the patch for bug 8207 or
manually add a thesaurus to a 5xx linking field in one of the authority
type frameworks):
1. Create a new authority record.
2. Go to the 5xx tab.
3. Click the authority control plugin ellipsis.
4. Do a search for an authority.
5. Select a relationship type.
6. Note that after you choose an authority, that the $w control field
is automatically populated with the relationship type.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
After applying patch for bug 8207, I had been able to follow the test plan step
by step, and get the expected result.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 1 August 2012
Makes clicking a Delete link refresh the search that
was performed so that the results are still on the screen.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as advertised. Very usefull. Still the issue that indexing being
not in real time, the search result displays the just deleted authority.
But there is no way to do better.
When performing subject analysis, it is not uncommon to find that an
authority record you need does not exist. This commit adds a link in
the search results to enable the cataloger to create an authority on
the fly and have the heading populated by the new authority.
To test:
1. Use the auth finder plugin the cataloguing module to search for a
heading you do not have an authority record for.
2. Click the "Create new" link.
3. Fill in your authority and save it.
4. Note that the heading field was populated with the data you entered
in the authority record.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Added a new authority using the plugin
2) Used an existing authority using the plugin
3) Created a new authority in the authority module
All worked nicely.
If you create a new authority record and the name already exists in
your database, you get a duplicate warning. This is good, but there is
a small error in the message:
Duplicate record suspected
Is this a duplicate of HASH(0x47fa670)?
This patch corrects the error message to show the title.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Error message correctly shows the name after applying this patch.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to save individual authority records in MADS, MARCXML, or
binary MARC format to the staff client.
To test:
1. Apply patch
2. View authority record in staff client
3. Try saving record as MADS, MARCXML, and MARC, and confirm that the
resulting files are what you expect
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, tested different export options on different records.
UNIMARC is the only marcflavour that does not already have an option
for searching all authority types, so check that the marcflavour is
UNIMARC before displaying the additional "All authority types" option.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
