Changed each of the pages in the circ folder to have one <h1> tag
showing that describes the page, rather than the <h1> describing the
logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the circ folder and check that they have
an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes a few corrections, including adding the
correct Flatpickr date format option when the timepicker is enabled.
Besides past and future date options, I've added a "pastinclusive"
option which allows dates in the past OR today. This option was
previously applied to the checkin page.
The patch also corrects a couple of places where the wrong date field
was modified with the new data attributes.
To test, apply the patch and test the datepickers on the batch checkout
and renew pages. When you select a date and time the "TimeFormat" system
preference should be correctly applied.
The calendar widget on the checkin page should allow you to select
today's date.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We must reduce the instantiations as much as possible to take advantages
of the default values and specific behaviours we have defined in
calendar.inc
This patch is suggesting to have a .flatpickr class and using the data
attributes:
- flatpickr-futuredate
- flatpickr-pastdate
- flatpickr-enable-time
- flatpickr-on-close-focus
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is a proof of concept demonstrating how jQueryUI date & time
pickers could be replaced using the Flatpickr library
(https://flatpickr.js.org/).
NEW: I've modified the default configuration of Flatpickr instances so
that a "Clear date" link is automatically appended. This eliminates the
need to add a button to the markup and event handling for each case.
NEW: Date/time formatting should be corrected in this revised patch.
The patch modifies three pages as test cases:
- Circulation -> Renew (with SpecifyDueDates enabled), to demonstrate
date and time selection.
- NEW: You can also test the datepicker shown when you renew an
on-hold item. This demonstrates a configuration which requires that
the selection be after today.
- Administration -> Patron categories -> New category, to demonstrate a
calendar-only date picker enforcing a date after today.
- NEW: Reports -> Patrons. The "Date of birth" fields are linked so
that the second cannot be before the first.
I've made some customizations to the default Flatpickr library's CSS and
incorporated it into staff-global.scss, so you must rebuild the staff
client SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Swapped the order of the page titles to have the unique information
first, i.e. the name of the specific page displays first, and the name of the website (e.g. Koha) displays at the end.
To test:
1) Apply patch
2) Ensure each of the files in the circ folder are swapped around
to display the most unique information first, and the website name is at the end
3) Ensure the pages displayed on the Staff Client that correspond to
these files also display the changes
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think the "breadcrumbs" ID is worth saving for past and future CSS
customization reasons.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Modified breadcrumbs to be accessible, in particular for a
screen-reader.
Made the block of breadcrumbs be a <nav aria label="Breadcrumb"
class="breadcrumb"> with an ordered list inside. The last breadcrumbs
also has aria-current="page" to specify that it is the current page.
To test:
1) Apply patch
2) Build scss file
3) Ensure each of the files in the circ folder have breadcrumbs that are
in a <nav aria label="Breadcrumb" class="breadcrumb"> block
4) Ensure that there is an ordered list in the block of breadcrumbs
5) Ensure that the last breadcrumb has aria-current="page"
6) Ensure that the breadcrumbs on each page of the staff client
belonging to these files look the same as before, but the '>' symbol
is replaced with '/' and the last breadcrumb has bold text
7) Ensure that when the last breadcrumb is clicked it takes you to the
page you are currently on
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for unseen renewals.
Here we retrofit knowledge of unseen renewals and add the display of unseen
renewal counts and warnings, in addition to adding the ability to
specify a renewal as being "unseen".
The functionality added here is goverened by the UnseenRenewals syspref.
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the functionality contained in biblio-default-view.inc
into biblio-title.inc. biblio-title.inc can now be called with a "link =
1" parameter in order for the title to be displayed as a link which is
controlled by the IntranetBiblioDefaultView preference.
To test, apply the patch and test the affected pages, especially titles
linked to in breadcrumbs menus
Acquisitions:
- Add to basket -> From existing record -> Search
- Title in search results
Catalog:
- Search for a record
- Add record to cart
- Open cart
- Title in brief display
- Check that link opens the correct page in the main window
- View bibliographic record
- ISBD view
- MARC view
- Normal view
- Local cover image detail page
- Checkout history
- Request article
- Item details
- From the "Edit" menu -> Attach item
- Stock rotation rota
- Place hold
Cataloging:
- Cataloging search -> Search results
Circulation:
- Article requests
- Overdues with fines
- Overdues
- Holds queue
- Holds to pull
- Hold ratios
- Holds awaiting pickup
- Transfers to recevie
- Renew
- Batch checkout
Lists:
- View list contents
Patrons:
- View patron details
- Holds history
- Checkout history
Tools:
- Rotating collections
- View collection
- Add item
- Tags
- Click term to see titles tagged with that term
- Batch record deletion
- Submit batch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's possible to specify a renewal due date in the checkouts table
even if SpecifyDueDate is off.
Also change the label from "Specify due date:" to "Renewal due date:"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This follow-up makes some markup and style improvements in order to make
the renew form more consistent with similar forms like checkout and
check-in.
It also adds a "Clear" button for the datepicker field, matching similar
date inputs.
To test, apply the patch and go to Circulation -> Renew.
- With or without the SpecifyDueDate system preference enabled the
form should look correct.
- With the SpecifyDueDate preference enabled you should see the date
form below the barcode input field.
- Select a date and test that the "Clear" button works to clear it.
- Compare to the check-in page to confirm that they look consistent
with each other.
Signed-off-by: Marco Abi-Ramia <marco.abi-ramia@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as bug 16748, for batch renew.
Test plan:
Check an item in
Renew it using the circ/renew.pl page
=> You can pick a due date!
=> The date is kept from one renew to another
Renew it until you reach the maximum number of renewals
=> You get a warning with "continue without renewing"
=> The date is still kept
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds the ability for items that are on hold to be renewed with a due date specfied by the user. It is enabled by the new "AllowRenewalOnHoldOverride" syspref. It is manifested in two locations:
1. In the "Checkouts" table on the Patron Details screen. It is now possible to select on loan items that would otherwise fulfil a hold request to be renewed. When such an item is selected, an additional date selection box is displayed to allow the user to specify the due date for all on hold items that are to be renewed.
2. In the Circulation > Renew alert screen. When a barcode of an on loan item that would ordinarily fulfil a hold request is entered, the usual alert is displayed indicating that the item is on hold, it is still possible to override this, and renew, however it is now also possible to specify a due date.
Test plan:
- Go to the Patron Details page for a patron who has an item on loan that would fulfil an outstanding loan request.
- TEST: Observe that it is NOT possible to select this item
- Enable the "AllowRenewalOnHoldOverride" syspref
- Return to the Patron Details page for a patron who has an item on loan that would fulfil an outstanding loan request.
- TEST: Observe that it IS possible to select this item
- Select the item
- TEST: Observe that an additional "On hold due date" input box is displayed
- De-select the item
- TEST: Observe that an additional "On hold due date" input box is hidden
- Select the item
- In the "On hold due date" input box, select a due date for the item
- Click "Renew or check in selected items"
- TEST: Observe that the item is renewed as usual
- In the "Renewal due date" input box, select a due date
- Remove the contents of the "On hold due date" input box
- Click "Renew or check in selected items"
- TEST: Observe that the item is renewed by falling back to the "Renewal due date" value if a value is not specified in the "On hold due date" input box
- Remove the contents of the "Renewal due date" input box
- Click "Renew or check in selected items"
- TEST: Observe that the standard loan period is used for the renewal period if no due date is specified in either box
- In the "On hold due date" input box, select a due date for the item
- In the "Renewal due date" input box, select a different due date
- Click "Renew all"
- TEST: Observe that all non on hold items are renewed using the value in "Renewal due date" and on hold items are renewed using the value in "On hold due date"
- From the main staff client from page, choose "Circulation", then choose "Renew"
- Enter the barcode of an item that you know to be on hold and submit
- TEST: In the alert box that appears, observe that a date picker is
displayed
- Choose a due date for this item, then click "Override and renew"
- TEST: In the "Item renewed" box, observe that the item has been
renewed to the date specified
Sponsored-by: Cheshire Libraries Shared Services
Sponsored-by: Halton Borough Council
Sponsored-by: Sefton Council
Signed-off-by: Andrew Farthing <Andrew.Farthing@sefton.gov.uk>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Enable OnSiteCheckouts system preference
2) Checkout an item checking the onsite checkout checkbos in more
options
3) Go to circulation > pending on-site checkouts
4) Verify the checkout shows
5) Go to circulation > renew
6) Try to renew the on-site checkout using the barcode
7) Verify display:
onsite_checkout Continue without renewing
8) apply the patch and reload page with error message
9) verify display:
Item cannot be renewed because it's an onsite checkout
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies several circulation templates to use the
Bootstrap grid instead of YUI.
This patch also removes obsolete "text/javascript" attributes from
<script> tags and "text/css" attributes from <style> tags in the
modified templates.
To test, apply the patch and view the following pages, confirming that
they look correct at various browser widths:
- Circulation -> Pending on-site checkouts (enable OnSiteCheckouts
preference).
- Test with the CircSidebar system preference both on and off
- Circulation -> Overdues
- Circulation -> Holds to pull
- Circulation -> Renew
- Test with the CircSidebar system preference both on and off
- Circulation -> Bibliographic detail page -> Request article (enable
ArticleRequests system preferences)
- Circulation -> Hold ratios
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies some staff client circulation templates so that
JavaScript is included in the footer instead of the header.
To test, apply the patch and test the JavaScript-driven features of the
modified templates: All button controls, DataTables functionality, tabs,
etc.
- Article requests (enable ArticleRequests system preference, have at
least one outstanding article request)
- Request article (Bibliographic detail page -> Request article).
- Item circulation statistics (Bibliographic detail page -> Items ->
View item's checkout history).
- On-site checkouts (enable OnSiteCheckouts system preference; Check out
some items as on-site checkouts; Go to Circulation ->
Pending on-site checkouts
- Overdues report (Circulation -> Overdues).
- Holds to pull (Circulation -> Holds to pull).
- Renew
- Holds ratios (Circulation -> Holds ratios).
- Check in
- Transfers to receive (Circulation -> Transfers to receive).
- Holds queue (Circulation -> Holds queue).
- Holds awaiting pickup (Circulation -> Holds awaiting pickup).
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you hit the renewal limit on the renewal tab, the message gives you a
message like:
"Windows 8 / ( 50610018249545 ) has been renewed the maximum number of
times by Johnny Test ( 12345678 )"
And has a button that reads:
"Ignore and continue"
This button is misleading, as it may be interpreted as "ignore the limit
and continue to renew the item".
Signed-off-by: Dominic Pichette <dominic@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a patron owes more than the OPACFineNoRenewals value, the issue won't
be auto renewed anymore (driven by the new pref OPACFineNoRenewalsBlockAutoRenew).
Test plan:
Note: You will have to manually change data in your DB, make sure you
have access to the sql cli.
1/ Set the OPACFineNoRenewals to 5 (for instance)
2/ Set OPACFineNoRenewalsBlockAutoRenew to block
3/ Check an item out to a patron and mark is as an auto renewal
4/ Make sure the patron does not have any fees or charges.
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed
6/ Create an invoice for this patron with a amount > OPACFineNoRenewals (6
for instance)
7/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed.
8/ Set OPACFineNoRenewalsBlockAutoRenew to allow
9/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Janet McGowan <janet.mcgowan@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit: Fast cataloging link should now show on all pages, removed offline circulation links
Edit 2: Creates the syspref to activate or deactivate the sidebar
Edit 3: Fixing merge conflicts, using Koha::BiblioFrameworks to find FA
framework and adding sidebar to on-site checkouts
This adds a sidebar to
circ/branchoverdues.tt
circ/circulation.tt (I also fixed up some of the indentation in this file to make it easier to see where the divs started and ended)
circ/renew.tt
circ/returns.tt
circ/selectbranchprinter.tt
circ/transferstoreceive.tt
circ/view_holdsqueue.tt
circ/waitingreserves.tt
circ/branchtransfers.tt
circ/on-site_checkouts.tt
To test:
1) Confirm syspref CircSidebar is activated
2) Go to all of the above pages and confirm the sidebar menu shows up
3) Confirm fast cataloguing link and transfer link are there
4) Trigger any error messages you can possibly think of (i.e. on renew.pl: barcode does not exist). Confirm that this does not mess up the layout of the page
5) Go to a user account page, Check out tab. (Since this is a circ/circulation.pl page). Ensure the circ nav sidebar doesn't show up (confirm it looks as it usually does)
6) Deactivate circSidebar
7) Confirm pages all look normal
Sponsored-by: Catalyst IT
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue marked as auto_renew is renewed manually, we want to display
the latest auto renew date possible.
Test plan:
1/ Define circ rules as in the previous patch.
2/ Check a item out, mark it as an auto renewal
3/ Back date the issuedate and make sure it will be too late to renew it
4/ Use the Circulation > renew page (circ/renew.pl) to manually renew
this issue.
You should get a warning "You barcode has been scheduled for automatic renewal
and cannot be renewed anymore since DATE."
If the pref AllowRenewalLimitOverride is set, you will be allowed to
renew it anyway.
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a new circulation rule (no_auto_renewal_after) to block/allow
auto renewals after a given delay.
For instance, if the issue date is 10 days before today, and
no_auto_renewal_after is set to 10, tomorrow the issue won't be auto
renewed.
Test plan:
0/ Execute the update DB entry
Note: You will have to manually change data in your DB, make sure you
have access to the sql cli.
1/ Define a rule with no_auto_renewal_after (10 for instance) and
norenewalbefore (5 for instance).
(This new rule will behave the same as norenewalbefore: the unit depends
on the lengthunit value).
The automatic renewals will be done from 5 to 10 days ahead.
2/ Modify the issues.issuedate, to simulate a checkout in the past:
UPDATE issues
SET issuedate = "yyyy-mm-dd hh:mm:ss"
WHERE itemnumber = YOUR_ITEMNUMBER;
with issuedate = 2 days before for instance
3/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too soon)
4/ Repeat step 2 with a due date set as 11 days before
5/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has not been renewed (too late)
6/ Repeat step 2 with a due date set as 7 days before
7/ Execute the automatic renewals cronjob script (misc/cronjobs/automatic_renewals.pl)
Confirm that the issue has been renewed (issues.renewals has been
incremented and date_due has been updated according your circ rules).
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In the Staff client, under Circulation > Renew, the message shown after
successful renewal of an item contains broken URLs. This is also true for
the message shown when you try to renew an item that is not checked out.
This patch fixes that.
Test plan:
1) Go to Circulation > Renew, and search for the barcode of a checked-out
item. In the 'Item renewed:' confirmation message, notice how the URLs
for the title and the barcode are broken.
2) Now search for the barcode of an item that is not checked out. In the
'Cannot renew:' message, notice how the URLs are broken here too.
3) Apply the patch.
4) Repeat steps 1) and 2). This time the URLs work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
To test, apply the patch and test deletion in the following cases. Test
both confirmation and cancel actions.
Circulation -> Check out
-> An item that is checked out by someone else
-> An item that is on hold to someone else
-> To a patron that has more than noisuescharge in fines (Allow
AllowFineOverride syspref)
-> To a patron that has reached the max amount of checkouts (Allow
AllowTooManyOverride syspref)
-> To a patron that has more than noissuescharge in fines (Allow
AllowFineOverride syspref and set noissuescharge syspref)
-> Renew -> An item that is on hold to someone else
-> To a patron that is at max renewals (Allow AllowRenewalLimitOverride syspref)
-> An item that is not checked out by anyone
-> Check in -> An item that is in transit to another branch
And look for other confirmation dialogs and check if I've missed any
Sponsored-by: Catalyst IT
EDIT: Made changes from Comment 2
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2 links are wrong on the renew page, because item.biblioitemnumber does
not return the biblioitemnumber as expect the template.
Test plan:
Renew an item and check the item link.
It should contain a valid biblioitemnumber for the 'bi' parameter.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Link repaired. At first glance, I am wondering if biblioitemnumber is
of actual use here; is it only passed back and forth between script and
template?
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Revert "DBRev to make notes of the XSS patches and the new important dependency."
This reverts commit e140603a59.
Revert "Bug 13618: Specific for branches.opac_info"
This reverts commit 06e4a50f00.
Revert "Bug 13618: (follow-up) Specific for other prefs"
This reverts commit d6475a111f.
Revert "Bug 13618: Fix for debarredcomment and patron messages"
This reverts commit dd98c9df92.
Revert "Bug 13618: Do not display html tags in patron's notices"
This reverts commit a065b243fe.
Revert "Bug 13618: Do not display and html tags in item fields content"
This reverts commit baeeaffbf8.
Revert "Bug 13618: Fix for system preference description"
This reverts commit a967a09261.
Revert "Bug 13618: Remove html filters for newly pushed code"
This reverts commit 0e98662b10.
Revert "Bug 13618: (follow-up) add missing lines for opac-shelves"
This reverts commit fc2fb605e5.
Revert "Bug 13618: (follow-up) Specific for ColumnsSettings"
This reverts commit bc308fdd9c.
Revert "Bug 13618: Fix for edit biblios and items"
This reverts commit 811c4e8402.
Revert "Bug 13618: followup to remove tabs"
This reverts commit ca8e8c397c.
Revert "Bug 13618: Fix last occurrences recently introduced to master"
This reverts commit bb417b256b.
Revert "Bug 13618: Fix for news"
This reverts commit ae5b98020a.
Revert "Bug 13618: Fix escape on sending baskets or shelves by email"
This reverts commit a7731ffe25.
Revert "Bug 13618: Specific for XSLTBloc"
This reverts commit 11fa38dc29.
Revert "Bug 13618: Specific for Salutation on editing a patron"
This reverts commit 36c07ad6d3.
Revert "Bug 13618: Specific for other prefs"
This reverts commit e6ea281a3b.
Revert "Bug 13618 - memberentrygen.tt errors Not a GLOB reference"
This reverts commit 7824874557.
Revert "Bug 13618: Specific for ColumnsSettings"
This reverts commit 1834da3da3.
Revert "Bug 13618: Specific for IntranetUser* and OPACUser* prefs"
This reverts commit 21ae62b253.
Revert "Bug 13618: Fix error 'Not a GLOB reference'"
This reverts commit 602bdbab4c.
Revert "Bug 13618: Specific for the ISBD view"
This reverts commit d254362435.
Revert "Bug 13618: Specific for pagination_bar"
This reverts commit 8837a8ae68.
Revert "Bug 13618: Specific places where we don't need to escape variables - intra"
This reverts commit 00eff140b3.
Revert "Bug 13618: Remove html filters at the intranet"
This reverts commit 7db851ff03.
Revert "Bug 13618: Specific places where we don't need to escape variables"
This reverts commit 49a3738b8d.
Revert "Bug 13618: Remove html filters at the OPAC"
This reverts commit cedaa0e23e.
Revert "Bug 13618: Use Template::Stash::AutoEscaping to use the html filter"
This reverts commit 01b38d3b13.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
use circ/renew.pl to renew an issue.
Without this patch, you will get an error.
Note: The error exists for 1 year now and nobody complained?? Does
someone still use this script?
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Followed test plan from patch 1/2, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes 2 new occurrences introduced by bug 11351 and bug
10493.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Removes a nasty "Template process failed: plugin error - EncodeUTF8:
plugin not found at /home/magnus/scripts/kohaclone/C4/Templates.pm line 124"
from /cgi-bin/koha/admin/itemtypes.pl
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- removes all html_entity usages in tt file which hide utf8 bugs
- removes all encode utf8 in tt plugins because we should get correctly
marked data from DBIC and other sources directly (cf plugin EncodeUTF8
used in renew.tt)
- adds some cleanup in C4::Templates::output: we now use perl utf8 file
handler output so we don't need to decode tt variables manually.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the new renewal errors 'auto_renew' and 'auto_too_soon'
to the renewal interface.
To test:
1) Issue two items:
- one with automatic renewal and no value for "No renewal before"
- another with automatic renewal and a value for "No renewal before"
2) Try to renew:
Home > Circulation > Renew
3) Confirm there are error messages explaining that the items have been
scheduled for automatic renewal and that one of the renewals is also
premature.
4) If global syspref AllowRenewalLimitOverride is set to "Allow" you
should be given the option to override.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that the new staff interface for renewals
recognizes when premature renewals are requested. If the
AllowRenewalLimitOverride system preference is enabled, staff members
are able to override the block:
To test:
[1] Set up a loan policy with a "no renewal before" value and
check out an item.
[2] In the renewal page, verify that attempting to renew the loan
results in an error forbidding the renew.
[3] If AllowRenewalLimitOverride is enabled, the operator should
also be given the option to override the block.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new Template Toolkit filter EncodeUTF8 to encode strings
to utf8 for correct display of diactritics.
Adds the new JavaScript function removeFocus() to staff-global.js
Use this function to remove the focus from any element for
repeated scanning actions on errors so the librarian doesn't
continue scanning and miss the error.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described - you have to actually look at the
error and pick what you want to do or confirm it. I think
maybe tying the action to a shortcut (c = confirm or similar)
would be nice, so you can get away with only using the keyboard.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This template followup fixes some minor template errors and adds some
style to dialog buttons matching those seen on the circulation page.
To test, submit barcodes to trigger the various error conditions:
Non-existant barcode, over the renew limit, restricted patron, item on
hold. Override and Ignore buttons should be properly styled and
functional.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
