This adds new syspref, HoldsNeedProcessingSIP, which controls whether
a hold that is related to item will be filled automatically or not. If
the user has enabled the syspref then instead of fulfilling the hold
automatically the hold will go to "in processing" state.
To test:
1. Checkout a book to patron A
2. Place a bib level hold to the book for B
3. Patron A returns the book via SIP, to simulate this use:
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --item <ItemBarcode> -m checkin
4. Notice that no notification is generated for Patron B about hold
and that the hold status in intranet and opac is "In Processing".
5. Notice that patron A (or other patrons) cannot checkout a book
that is in processing, because it is considered to be attached to
the holdee (similarly to the waiting state):
./misc/sip_cli_emulator.pl -su koha -sp koha -l CPL -a 127.0.0.1 -p 6001 --patron <PatronABarcode> --item <ItemBarcode> -m checkout
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Rebased-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to not only block the circulation of a guarantor based on fines owed by guarantees, but would also like to block circulation for all guarantees as well. Basically, if a family as a whole reaches a certain threshold of fines, the entire family will be blocked from checking out items.
Test Plan:
1) Apply this patch
2) Set NoIssuesChargeGuarantorsWithGuarantees to $14
3) Create a family of four ( 2 guarantors, 2 guarantees ) where the parents guarantee both children
4) Give 3 of the 4 a $5 fine
5) None of them should be able to check out items
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At my request, we added an 'Originating library' option to the manual
transfers form.
However, we did not properly pass this through in the controller and I
have since discovered that my request was ill conceived/a
misunderstanding of requirements.
This patch removes the option from the template and drops the references
to it in the controller.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is a follow-up for bug 25969. The way we handle itemnumber is too complicated and error prone.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Prior to this patch if you had CircConfirmParts enabled and you
attempted to checkin a deleted item then you would be met with a server
error.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch capitalizes the 'ADDITIONAL_MATERIALS' key in the
needsconfirm hash return value for CanBookBeIssued to restore
consistency with previous code and ensure SIP Checkout works as
expected.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the confirmation from an alert to a dismissable modal
which allows for optionally not checking the item in
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Use build_sample_item in tests
Simplify tests for the confirmation
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Whilst QAing bug 13547 it was highlighted to me the at the 952$3 field,
and thus the item.materials field, may contain arbitrary notes about the
material rather than just numeric values. As such we need to check for
the field being defined as aposed to greater than '0'.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This clarifies the preference name to make it clear we are talking about
the 'parts' that make up an 'item'. 'Part' is a well known term in
british english libraries and I think perhaps 'Materials' may be
confused with other terms?
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan
1/ Catalogue an item to contain multiple parts by populating 'Materials
specified (bound volume or other part)'
2/ Enable the new system preference 'CircConfirmParts'
3/ Attempt to checkout the item created in step 1 to a user and note
that confirmation is now required.
4/ Checkout the item
5/ Attempt to checkin the item you have just checked out and note that
confirmation is required.
6/ Signoff
Sponsored-by: Royal College of Music [https://www.rcm.ac.uk/]
Sponsored-by: PTFS Europe [https://ptfs-europe.com/]
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Updated to only show one barcode number, with either an "only" or an "or any available" depending on whether it's an item or bib hold.
Also incorporating feedback to simplify the TT logic and remove list formatting.
To test:
1 - Place an item level hold on a bib with several items with the same callnumber
2 - View the holds to pull report
3 - Try to guess which one on the shelf is right?
4 - Apply patch
5 - See the barcode in holds to pull report
6 - You can now grab the correct item (but don't yet)
7 - Place a next available hold on the same title
8 - See the report now shows one possible valid barcode with the text "or any available."
9 - Check in a different item that fills the next available hold
10 - Now the report shows the single item for the borrower
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a hold is checked in at the wrong destination we revert the found status
For a title level hold this means we return it to a title level hold, with no itemnumber
When we checkin the item we find the hold, but won't set the itemnumber in the hold until it is confirmed
In the script we were setting the itemnumber param, but then setting it again using the reserve itemnumber.
In all conditions before the itemnumber has been set, we don't need to set it again, especially when we do
so incorrectly
To test:
- Log in at Library A
- Place hold on item at Library A, for pickup at Library A
- Check item in at Library A
- Click "Confirm hold"
- Set library to Library B
- Check item in again (try with both the box on reutrns.pl and the box in the header)
- Click "Confirm hold and transfer"
- get error: Can't call method "biblio" on an undefined value at /kohadevbox/koha/circ/returns.pl line 147
- apply patch
- repeat
- success!
- confirm trappings of holds works as normally otherwise too
Signed-off-by: Daniel Gaghan <daniel.gaghan@pueblolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If a record level hold is filled and waiting at Library A, and the item
is checked in at Library B, and an attempt is made to re-fill the hold
with the item, Koha will return an ISE.
Test Plan:
1) Place a hold for Library A, at Library A, for pickup at Library A
2) Check in the item at Library A and fill the hold so it is waiting at Library A
3) Log in as Library B, check in the same barcode
4) Note the request to fill the hold with the item
5) Choose to fill the hold
6) Note you get an internal server error
7) Apply this patch
8) Restart all the things!
9) Repeat steps 1-5
10) No ISE!
Signed-off-by: Daniel Gaghan <daniel.gaghan@pueblolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as bug 16748, for batch renew.
Test plan:
Check an item in
Renew it using the circ/renew.pl page
=> You can pick a due date!
=> The date is kept from one renew to another
Renew it until you reach the maximum number of renewals
=> You get a warning with "continue without renewing"
=> The date is still kept
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Go to Circulation->Transfer
2 - Find an item from your branch and create a transfer to branch B
3 - Note you can specify the origin and default is 'Item's holding library'
4 - Confirm the item is marked as held at your current branch and is being transferred to B
5 - Find an item from a third branch, branch C
6 - Transfer that item to branch B from branch D
7 - Confirm the item is held at branch D and is being transferred to B
8 - prove -v t/db_dependent/Circulation.t
9 - prove -v t/db_dependent/Koha/Items.t
10 - prove -v t/db_dependent/RotatingCollections.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Go to Circulation->Transfer
2 - Note your signed in branch
3 - Find an item from your branch and create a transfer to branch B
4 - Confirm the item is marked as held at your current branch and is being transferred to B
5 - Find an item from a third branch, branch C
6 - Transfer that item to brnach B
7 - Confirm the item is held at your current branch and is being transferred to B
8 - prove -v t/db_dependent/Circulation.t
9 - prove -v t/db_dependent/Koha/Items.t
10 - prove -v t/db_dependent/RotatingCollections.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
You should be able to add desk choice when you are logging in or
changing library.
Test plan:
1. apply patch
2. have at least three libraries, one without desk, one with one and
one with a few.
3. At login, when choosing a library, it should enable all desks it
has. Pick one.
4. the desk id and name should be set in your session and appear in
the top right, next to the library name.
5. change library and desks from intranet (at the set-library.pl page)
6. you should have the same behaviours
7. if you have a library without a desk, it should prompt you a '---'
option and no desks will be attached to the session.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When Desks are defined, a librarian can attach a desk to its session.
Test plan:
1. apply 13881 and create some desks
2. you should see “NO DESK SET” in the intranet header
3. go to circulation > Set desk
4. you should see your desk name in the header, whatever the page
5. you can also set desk with the header menu
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The template plugin Branches contains a method GetLoggedInBranchcode that returns current branch code.
This patch adds GetLoggedInBranchname to get current branch name.
It is used to replace vars LoginBranchname and LoginBranchcode sent to all templates in C4/Auth.pm.
In labels and patrons cards modules, I choose to remove a unseless display of
current branch in a hint.
In acqui/acqui-home.tt, I choose to remove a useless display of current
branch and also because table of founds contains a filter on library.
Test plan:
Check pages source code to see branch code or name is correct.
list of the pages:
/cgi-bin/koha/acqui/acqui-home.pl
/cgi-bin/koha/catalogue/detail.pl?biblionumber=XXX
/cgi-bin/koha/circ/branchoverdues.pl
/cgi-bin/koha/circ/set-library.pl
/cgi-bin/koha/circ/offline.pl
/cgi-bin/koha/labels/label-edit-batch.pl?op=new
/cgi-bin/koha/labels/label-manage.pl
/cgi-bin/koha/patroncards/edit-batch.pl
/cgi-bin/koha/patroncards/manage.pl
OPAC:
/cgi-bin/koha/opac-detail.pl?biblionumber=XXX
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Display copyright year (publication year) of book
together with title in "Holds to pull" report.
Copyright year is fetched from biblio -table as "copyrightyear"
and displayed when the preferred marc is set to MARC21.
Publication year is fetched from biblioitems -table as "publicationyear"
and displayed when the preferred marc is set to UNIMARC.
1. Place a hold on book with known copyright year.
2. Go to /cgi-bin/koha/circ/pendingreserves.pl and check the "title"
table of that book that you placed hold on.
3. Observe that there's no information about publication year in that
field.
4. Apply patch.
5. Repeat step 2.
6. Observe that copyright year (publication year) of book appeared
in the title table after book's title and author.
Mentored-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In transfers page /cgi-bin/koha/circ/branchtransfers.pl :
Itemtype is always from biblioitems.itemtype, regardless of system preference item-level_itypes.
Patch also changes template to use the object Koha::Item.
Patch also fixes a small typo : closed <form> tag.
Test plan :
1) Test with both values of system preference 'item-level_itypes'
2) Go to Circulation > Transfert
3) Enter a barcode
4) Enter another barcode
5) Check you see in table all datas and that 'Item type' is correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1- place 2 bib-level holds on available items
2- confirm they both show on Holds to Pull
3- edit one hold from the database to set found='T'
4- reload Holds to Pull, confirm it is now empty
5- apply patch
6- Reload Holds to Pull
7- confirm it now shows the hold you did not edit
Signed-off-by: donnab <donna@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Using capitals for SQL reserved words; added a FIXME
Tested with:
update reserves set found='T', itemnumber=NULL where reserve_id=...
This should be a workaround while we fix the underlying problem.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Confirm age shows in the suggestions dropdown when using the checkout
search in header (if user set DOB).
Confirm 'Age unknown' shows if no DOB set.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Added a feature that displays edition information of the book
together with title in "Holds to pull" report.
Edition information is fetched from "biblioitem" table
as "editionstatement" and transferred to template.
Those changes don't have performance impact as all tables
including "biblioitem" were already used and joined in this request.
Mentored-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To make sure we are going to display the correct hold's info we need to
pass the reserve_id.
== Test plan ==
1. Add some content to HOLD_SLIP notice, e.g.
<h2>[% branch.branchname %]</h2>
<div>[% biblio.author %]<br>[% biblio.title %]<br>[% item.barcode %]
<ul><li> Reserve ID: [% hold.reserve_id %]</li>
<li>Expiration date: [% hold.expirationdate %]</li></ul>
2. Add 2 holds for 1 patron to a single record
3. Check the reserve IDs in the reserves table - on a clean sandbox, they will be 1 and 2
4. Check in one of the items from the record and print the slip
5. Note that the reserve ID on the slip is 2 and the expiration date is blank
6. Repeated check ins do not change this
7. Check in a second item from the record
8. Note that the reserve ID for this hold is also 2, but this time the expiration date is filled in
9. Check in the first item again - the reserve ID stays as 2, but this time the expiration date is filled in
10. Apply patch
11. cancel the holds to come back to a clean state
(and maybe ensure items aren't in transit)
12. redo the test and see the following differences
13. 1st checkin:
1. expiration date ok
2. the reserve ID is the one of the first hold
14. 2nd checkin:
1. expiration date ok
2. the reserve ID is the one of the second hold
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
A rebase lost the fall through for TransferTrigger as a message. This
patch simply adds back in the dropped elsif statement.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Adds regex to the split() of the passed parameters to improve searching.
Test plan
1. Go to Course Reserves module.
2. Press New course button.
3. Make active the instructor search box.
4. Start typing the last name of a patron that exists in your database.
5. At the end of the last name type ", " and try to add a first name.
6. The search should fail.
7. Apply the patch.
8. Follow steps 1-5 again.
9. You should now be able to search using the following methods
9a. surname, firstname
9b. firstname surname
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We should use Koha::DateUtils instead of Date::Time directly
This patch simplay replaces calls to now() with a call to dt_from_string()
which does effectively the same thing.
Probably reading the code and verifying changes is sufficient but...
To test:
1 - confirm the files all compile
2 - confirm all tests pass
3 - confirm Koha still works
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This renames the selectbranchprinter.pl file to the more
fitting set-library.pl.
To test:
- Change the library with "Set library" from
- The menu in the top navigation bar
- The circulation start page
- Verify the help link on page leads to the correct
section in the manual
- Read the code... and verify all occurences have been caught
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Some libraries would like the option to ignore suspended holds when using the holds
ratio report
Note: this report fails with strict mode enabled, please disable to test
To test:
1 - Add enough holds to a record (3) to make it show on the holds ration report
2 - Browse to Circulation->Holds ratio
3 - Run with default settings and confirm the title shows up
4 - Suspend one of the holds
5 - Run report again and confirm title still shows
6 - Apply patch
7 - Reload the report
8 - Note new option
9 - Run report - title does not show
10 - Lower ratio to 2 and confirm the hold shows
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Starting to replace the ModItem calls with Koha::Item->store
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Apply patches, restart_all
2 - Gi to Circulation->Transfer
3 - Transfer an item
4 - Check the branch transfers table
5 - The reason is set to 'Manual'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Place a hold for pickup at a different branch than you are signed in at on an item owned by current branch
2 - Check in the item
3 - Confirm the transfer
4 - Check the branchtransfers table and note the reason is 'Reserve'
5 - Set the preference CanMarkHoldsToPullAsLost to allow
6 - Place a hold on an item at branch you are singed in at
7 - Ensure you are not using strict sql modes (bug 22431)
8 - Go to Circulation->Holds to pull
9 - Mark hold as lost
10 - Check branchtransfers and confirm reason is "LostReserve"
11 - Check in item from step 1 at the correct branch
12 - Go to Circulation->Holds awaiting pickup
13 - Cancel the reserve
14 - Check branchtransfers and confirm reason is "CancelReserve"
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds handling to catch transfers that may have been triggered
on item return.
Test Plan:
1) Enable AutomaticItemReturn and accompanying system preference
2) Return an item to the wrong branch and note the transfer
3) Check the database for the new trigger value
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Place a hold on an item
2 - Go to Circulation->Transfers
3 - Attempt to transfer item to a branch it is not expected at
4 - No warning
5 - Apply patches
6 - Repeate
7 - You get a notice that there is a hold and must deal with the hold (or ignore)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There is some quite old and unused code in Koha related
to printer configuration and network printing. These code
hasn't been functional in a long time and should be removed.
This patch:
- Removes printcirculationslips system preference
- Removes table printers
- Removes branchprinter column from branches
Check that:
- Go to administration
- Open any age there, but change the last bit to: printers.pl
- Apply patch, run the database update
- Verify the hidden page no longer exists
- Verify that logging in and out still works correctly
- Verify that checkout and returns work correctly
- Switch to another branch using the "Set library" option
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
NO_LIBRARY_SET was used when the DB user was logged in. Since bug 20489
it's not longer possible. We could remove the code.
One occurrence left in C4::InstallAuth as there is no (real) logged in user yet.
Test plan:
* Install Koha to make sure NO_LIBRARY_SET is not needed during the
install process
* Login into Koha
* Make sure the your library's name is displayed correctly in the header
* Set another library
* Confirm that the library's name is updated
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No problem during install, nor changing library.
Fixed (pre-existing) tab in circ/branchtransfers.pl
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 9978 should have fixed them all, but some were missing.
We want all the license statements part of Koha to be identical, and
using the GPLv3 statement.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The auto_renew parameter is not sent to the template when the popup
triggered by itemBarcodeFallbackSearch is displayed.
Test plan:
- Turn on itemBarcodeFallbackSearch
- Open a patron account
- Check the checkboxes for automatic-renewal
- Search for a title keyword in the checkout input box
- Verify that auto-renewal flag is set
Note for QA: The auto_renew flag will be set in any cases. Should we
expect regression?
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
and remove 'scalar' keyword in calls where it's not needed.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
When loading returns.pl, code to check rotating collections fires off an search for items by barcode, but doesn't check for a barcode first. This means the code will search for items where barcode is NULL, which is definitely not the intended function.
Test Plan:
1) Apply this patch
2) Set up a rotating collection with items
3) Transfer the collection
4) Check in a rotating collection item
5) Note no change in functionality
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
