This patch just check the syspref and use it as base date of renew.
Signed-off-by: Henri-Damien LAURENT <henridamien.laurent@biblibre.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
If the syspref 'AllowNotForLoanOverride'(YESNO) is set to YES, the librarian is able to force a loan on an item set as "not for
loan".
If the item is not for loan and the syspref is set to YES, koha will ask to the librarian if he really want to check-out it, else
do nothing.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Add AmazonReviews syspref.
DOCUMENTATION:
AmazonReviews is OPACAmazonReviews counterpart,
except that in staff interface Editorial Review
is displayed alone, without reader reviews.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch removes the system preference from new installations.
No db revision is supplied to remove the system pref from existing installations.
It is recommended for administrators to use the scripts provided in the misc/ directory
to ensure that their system preferences are in sync with those used in code.
Admins should remove this preference from existing installations manually.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a system preference controlled feature. This controls how
many returned items are shown on the check-in page.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a feature and system preference: ceilingDueDate. If this is
set to a valid ( according to dateformat syspref ) date, then calculated
due dates will be less than this date.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Extends Christopher Hyde's patches to add LTFL support
as follows:
* adds fr-FR system preferences
* adds updatedatabase.pl
The three new system preferences are:
LibraryThingForLibrariesEnabled - turn ON to enable LTFL support
LibraryThingForLibrariesID - client ID for LTFL service
LibraryThingForLibrariesTabbedView - put LTFL content in tabs on bib detalis page
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Intended for corporate or special sites which require the name of the person
who has checked out an item to show in the OPAC. Most libraries will want
to leave this turned off!
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Allows specification of how many issues of a subscription to display
at a global and subscription-specific level. Also adds a link to the
detail page to a specific subscription.
Signed-off-by: Daniel Sweeney <daniel.sweeney@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
www.babeltheque.com is a LibraryThings for Libraries equivalent.
This patch enables this service on OPAC.
* Replace previous patch in order to apply onto last master HEAD
and solve conflicts induced by last pushed pateches:
1bb9f76e66
* Modify kohaversion.pl
* It uses v3.01.00.016 slot.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch resolves a number of problems related to Enhanced Content:
1. Previously, there was no syspref for controlling whether or not to display
Amazon.com cover images apart from other content. This had the side effect
of preventing use of amazon.com content alongside use of another provider's
images. This patch introduces AmazonCoverImages and OPACAmazonCoverImages,
and changes the name of AmazonContent to AmazonEnabled.
So, for instance, you can now enable OPACAmazonSimilarItems yet utilize
SyndeticsCoverImages for displaying those similar items.
NOTE TO DOCUMENTATION TEAM: please update references to AmazonContent
and OPACAmazonContent to comply with the above.
2. Fixes some semantically incorrect uses of AmazonContent (now OPACAmazonEnabled)
on the OPAC side.
3. Resolves once and for all, the normalization of ISBN,UPC,EAN and OCLC numbers
for all enhanced content elements; These elements can be normalized using the
new functions in C4::Koha; I've replaced use of the various previously used
variables $xisbn,$norm_isbn,$clean_isbn, etc with $isbn, and the template
variable normalized_isbn.
We finally have a single, consistant place to retrieve normalize values for
these fields given a particular record.
4. Adds Syndetics attribution statements to display of all Syndetics content
'enhanced content provide by Syndetics' or 'Enhanced Description from Syndetics'
5. Adds an option to view the large cover image on the detail page on the OPAC
when using SyndeticsCoverImages; this option is controlled by a new system
preference: SyndeticsCoverImageSize which has two values: MC (medium) LC (large)
6. Adds UPC and OCLC numbers for Syndetics enhanced content queries especially
helpful for finding enhanced content for DVD and Music materials
7. Adds capability to display Syndetics images to opac-user for checkouts and overdues
8. Updates to systempreferences.sql, and updatedatabase.pl database revision 015
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch just update the syspref to use incremental|annual|hbyymmincr|OFF instead of "YesNo".
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Added syspref to updatedatabase.
Updated kohastructure.sql with the limits table.
Signed-off-by: Andrew Moore <andrew.moore@liblime.com>
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Code changes to display the priority level on holds in OPAC. Turned on/off based on System Preference. Database changes to systempreferences for both English and French
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Originally by Jesse Weaver <jesse.weaver@liblime.com>
This patch creates a new system preference, AllowRenewalLimitOverride,
that, if YES, allows the renewal limit to be manually overridden. It
updates C4::Circulation and reserve/renewscript.pl to obey this.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The intranetuserjs syspref allows a Koha administrator
to insert arbitrary JavaScript into the staff page header.
Now that this syspref is functional again, this patch
changes the installation scripts so that the default
value is blank - any JavaScript we ship with Koha should
be in the templates, not in a syspref.
Documentation changes: none per se. However, I do want to
point out that the intranetuserjs syspref is a bit of a
dangerous one - enter a value with incorrect syntax, and
you could make it difficult to access the staff interface -
and should probably be marked as an advanced option.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Following suggestion by Vincent Danjean for Debian
packaging, 0755 -> 0644 for non-executable
files.
Also removed shebang from a few modules in C4.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch deprecates the NoReturnSetLost system preference, which, as it
turns out, was not implemented anyway. New longoverdue script allows one to
specify on the commandline system-wide delays for changing items to different
lost statuses, and optionally charge for the item.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Previously, the SMSSendDriver system preference was set as a local use system
preference. This patch makes it an official system preference under the "Patron" tab.
This system preference determines which SMS::Send driver is used to send SMS messages.
I have attempted to take care to not overwrite this system preference if it has already
been set.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
From the bug report:
The serialsadditems syspref was ostensibly removed in DB rev 071
(http://git.koha.org/cgi-bin/gitweb.cgi?p=Koha;a=commit;h=5c41ae54e68866f9661e853376537059f4d83f70)
in favor of a new serialsadditems column in the subscription table.
However, this removal was incomplete. It is still created for new installations by:
installer/data/mysql/en/mandatory/sysprefs.sql
installer/data/mysql/fr-FR/1-Obligatoire/unimarc_standard_systemprefs.sql
and is used in
serials/serials-recieve.pl
serials/serials-edit.pl
admin/systempreferences.pl
Since the system preference was not removed from the sample data scripts, it
is necessary to add another DB rev to remove it - a user may have made a
fresh install of Koha after DB rev 071.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
As part of fixing hold request bugs 1710 and 1739,
two new system preferences are defined:
AllowOnShelfHolds: YesNo, default value OFF
* if ON, allow item-level hold requests to be
placed for available items that are not on loan
AllowHoldsOnDamagedItems: YesNo, default value ON
* if OFF, item-level hold requests cannot
be placed on items that are marked damaged.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I forot to add the new EnhancedMessagingPreferences system preference to the French SQL. I
hope I added it in the right place. The 'explanation' is untranslated.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
For documentation, please indicate that as part of profiling,
staff can refer to the AdvancedSearchTypes system preference to
choose where to draw the advanced search 'Types' from. Currently
this is implemented as a choice, between itemtypes and ccodes,
but it's been designed to work with any authorised value so long
as an index exists for searching by that authorised value.
By default, and if this syspref doesn't exist, it will pull from
itemtypes as before.
OPACItemHolds
OPACShelfBrowser
have been added to updatedatabase.
The xslt sysprefs have also been added with a note stating they
only work with MARC21.
from circulation dashboard, creates new sysprefs, assigns
the sysprefs to the proper tab in sysprefs (Circulation),
updatedatabase changes to do the previous, and fixing one
redundent limit in the query for build_holds_queue.pl
Note: still need to address item-level holds
Added two tables and system preference to support
a new patron alternate ID and attributes feature.
A patron attribute (or extended patron attribute) is an
additional piece of information associated with a patron
record. Each attribute has a type that specifies
whether the attribute is repeatable, can serve as
a unique identifier, can take a password, and
whether it can be used to search for patron records
in the staff interface.
The list of attribute types is controlled by the
superlibrarian. Once an attribute type is defined,
values for that attribute can be added to the patron record
via the staff interface or the batch patron import.
Two uses of extended attributes are:
- defining additional unique identifiers, such as
a campus student ID number, a library staff
HR number, and so on. These IDs can be used
for searching or matching and overlaying records
during a batch import.
- additional statistical categories. For example,
a library could define an attribute type for
tracking the academic major of a student patron.
Any number of attributes of this sort could be
defined.
The extended attributes feature is completely optional. If
the new syspref, ExtendPatronAttributes, is OFF, the patron
attributes tables will be ignored; it will not be possible
to display, edit, search for, or match on extended
attributes.
The tables are:
[1] borrower_attribute_types - store attribute types
defined by the administrator.
- code
- description
- repeatable (whether a patron record can have
more than value of a given attribute type)
- unique_id (whether values of this type
must be unique within the database)
- opac_display (whether values of this type
can display in the patron details page in the OPAC)
- staff_searchable (whether values of this type
can be used to retrieve patron records in circulation)
- password_allowed (if set, staff patron editor will
allow a password to be associated with a value; this
is mostly a hook for functionality to be implemented
in the future.
- authorised_value_category (code of an authorised_value
category. If one is specified, the staff patron
editor will use a dropdown for setting values of this type)
[2] borrower_attributes - the actual attributes.
- code (attribute type code, FK)
- borrowernumber (link to patron, FK)
- attribute (the value)
- password (password associated with value)
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
