Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 14047: Sort z39.50 servers in Acquisition
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 14047: [QA Follow-up] Move result_class back into attributes
No need to put this into a separate call.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Note that we strictly speaking do not need the hashref inflator here,
because TT understands hash.column as well as object.property.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the item for an order had been deleted since or there was never
an item created for the order (subscription orders) those records
where missing from the "Spent" page in acquisitions.
Patch corrects the SQL to list the correct records.
To test:
- Create different orders for one fund and receive them
- normal order with a few items
- subscription order (no item)
- normal order with an item, delete the item after receiving
- include some freight cost in one of the invoices
- Compare the amount spent shown on the acq start page
with the amount shown at the end of the 'spent' page
- Without the patch, the amounts don't match and not all
received titles are listed
- With the patch, amounts should match and list shoudl be complete
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This condition is never reached, the confirmation to delete a basket is
done with a popup in the template.
Test plan:
Confirm you don't find any regression when creation/editing and deleting
a basket.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I didn't create or edit. However, the only perl script that uses
the template is acqui/basket.pl and the only place delete_confirm
is set in acqui/basket.pl is in that code which is only called if
del_basket actually existed anywhere else, which it doesn't.
I did have two baskets, one with two transfers from the first, so
I transferred one back, and then proceeded to test the two delete
buttons in the modal. No issues. Cancel (to close the modal) works
too.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, it is possible to create records in acquisitions, but the
ACQ framework is only used for items created in this module.
This patch allows to defined default values in the ACQ framework for
records created on the acquisition module.
Test plan:
1/ Make sure you have the ACQ framework created (otherwise create it
from the default framework).
2/ Define a default value for a field (for instance 099$z=1).
3/ Go in the acquisition module and create a new order from a new
record.
4/ Fill mandatory information and save.
5/ Go on the detail page of this record and verify the default value
exist.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These two subroutines did the same job (same select, same join, etc.)
Test plan:
Go on the basket list page and verify you see the pending and the
cancelled baskets.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Two small things are adjusted in separate follow-ups.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the regressions introduced by the previous patches.
If you have tested all in once, you didn't see them.
It introduces library, category and "first letter" filters.
Test plan:
1/ On all pages impacted by previous patches + new order empty (link patron to
an order) + guarantor search
2/ Add / Select patron to the list
3/ Use the filters
4/ Confirm there is no regression
Tested together with other patches.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The "Managed by" field displayed on creating/editing an order is always
the name of the logged in user.
To reproduce:
1/ Log in with patron A
2/ Create a basket
3/ Create an order
4/ Log in with patron B
5/ Edit the order
6/ The "Managed by" line is "patron B"
Test plan:
Apply the patch and confirm that the "patron A" is always the basket
manager.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is a badly managed date in acqui/basket.pl:
if the date is 15/01/2015 (metric format), it will become
2015-1-15 after the following line:
$estimateddeliverydate = "$year-$month-$day";
Add_Delta_Days is used at several place, and the ouput is forced to
display date on 4 digits and month/day on 2 digits.
This patch does the same thing for $estimateddeliverydate.
Note that I previously developed a patch to take this format into account (with missing 0)
in Koha::DateUtils::dt_from_string, but I don't think it's a good idea
to manage bad formated dates.
We will certainly find some issues after previous patches, but it will permit to catch
them!
IMO it's preferable than to keep them hidden.
The patch was:
diff --git a/Koha/DateUtils.pm b/Koha/DateUtils.pm
index 5fe2653..4434a67 100644
--- a/Koha/DateUtils.pm
+++ b/Koha/DateUtils.pm
@@ -72,17 +72,17 @@ sub dt_from_string {
my $fallback_re = qr|
(?<year>\d{4})
-
- (?<month>\d{2})
+ (?<month>\d{1,2})
-
- (?<day>\d{2})
+ (?<day>\d{1,2})
|xms;
if ( $date_format eq 'metric' ) {
# metric format is "dd/mm/yyyy[ hh:mm:ss]"
$regex = qr|
- (?<day>\d{2})
+ (?<day>\d{1,2})
/
- (?<month>\d{2})
+ (?<month>\d{1,2})
/
(?<year>\d{4})
|xms;
@@ -90,9 +90,9 @@ sub dt_from_string {
elsif ( $date_format eq 'us' ) {
# us format is "mm/dd/yyyy[ hh:mm:ss]"
$regex = qr|
- (?<month>\d{2})
+ (?<month>\d{1,2})
/
- (?<day>\d{2})
+ (?<day>\d{1,2})
/
(?<year>\d{4})
|xms;
diff --git a/t/DateUtils.t b/t/DateUtils.t
index 886e1d6..0877240 100755
--- a/t/DateUtils.t
+++ b/t/DateUtils.t
@@ -189,3 +189,8 @@ is( output_pref( { dt => $dt } ), '31/01/2015 12:34', 'dt_from_string should mat
# date before 1900
$dt = dt_from_string('01/01/1900');
is( output_pref( { dt => $dt, dateonly => 1 } ), '01/01/1900', 'dt_from_string should manage date < 1900' );
+
+# missing 0
+$dt = dt_from_string('1/1/2015');
+is( output_pref( { dt => $dt, dateonly => 1 } ), '01/01/2015', 'dt_from_string should generate a DT object even if 0 are missing' );
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
The "common" template is improved to allow different type of picking:
"add" or "select".
The first one appends a patron to a list, the second one selects the
patron and close the result search window.
The members/guarantor_search.pl has completly changed but is quite the
same file as acqui/add_user_search.pl. Both should exist: they don't
belong to the same module (acqui vs members), the picking type is
different (add vs select) and the columns are not the same.
The changes in the common template are very powerful, it's now possible
to list the column we want! This will be very useful for further
reusability.
Before this patch, all patrons mathing the pattern were return. Now only
the first 20 are (depends on the DataTables selected value).
For QA: This patch introduces a new template plugin "To", for now it
permits to convert a perl structure to json. In the idea, it could
permit to convert foo to bar too.
Test plan:
1/ Verify there is no regression in the guarantor search. When the
selection has been done, all data from the guarantor should fill the
form in the "main address" section.
Note that the request is done when the search input in not empty and the
user stop to write for 1 sec.
2/ Verify there is no regression on the 2 other pages where this patron
search is used: link a patron to an order and to a basket (in the
acquisition module).
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The add_user_search tt file will be reuse in next commits, this commit
just moves it in a "common" directory.
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The date filters on the parcel page would only work with
dates formatted YYYY-MM-DD.
To test:
- Select a vendor, that already has a few invoices
- "Receive shipment" - you are on the parcels page
- Use the From and To filters on the left, notice there
is now a date picker on those fields
- Verify the search works correctly for different date
formats
Signed-off-by: Nicole <nicole@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When no search has been done yet, it's not necessary to display the
result list.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before this enh, the users to add to a basket should have the
acquisition.order_manage permission.
This patch reintroduces this behavior.
The code in acqui/add_user_search.pl was never used. The filter should
be done in the members/search service.
But it is not possible easily to filter using a sql query, so the filter
is done after. This means that we cannot use the DT pagination
(otherwise the results will become inconsistent).
Test plan:
1/ On adding patrons to a basket, verify that the search patron results contain
patron with the acquisition.order_manage permission.
2/ Verify that all patrons are return on the 'normal' patron search and
when adding patrons to an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A previous enhancement allows to link basket with patrons.
Next patches will use the same way to link order with patrons.
In order to avoir c/p of code, this patch refactores this part of code.
Test plan:
1/ Verify there is no regression on adding/modifying users to a basket.
(acqui/basket.pl?basketno=XXX, "Managed by", "Add user").
2/ Note that you get a friendly message if the user is already present in the
list and when the user has correctly been added to the list.
3/ Note that the list uses the member search service (ie. DataTable +
serverside processing).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If more that 1 tax rate exist, 1 total ligne should be display in the
footer.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous patch does modify the code for cancelled orders.
Test plan:
Cancel 1+ orders and verify the prices are correct (i.e. the same as
the non-cancelled orders) and that the prices are formated.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/basket.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Go on the basket page
4/ Apply the patch
5/ Verify you don't see any difference before and after applying the
patch
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If more that 1 tax rate exist, 1 total ligne should be display in the
footer.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/invoice.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Receive the items and create an invoice
4/ Go on the invoice page acqui/invoice.pl?invoiceid=XXX
5/ Verify you don't see any difference before and after applying the
patch on the invoice details table.
Note: The only different you should see is the price formating for
"Total tax exc.". Before this patch "432.10" was displayed "432.1".
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The acquisitions search is exhibiting the same behavior as bug 11410.
Results are always fixed in order of biblionumber, among other possible
issues ( including the ampersand issue ).
Test Plan:
1) From an open basket, choose "Add to basket"
2) Run a search for "From an existing record"
3) Note the "View MARC" URLs are fixed in order of biblionumber
4) Apply this patch
5) Refresh the page
6) Note the results are no longer fixed in order of biblionumber
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described.
I think the code could be a bit tidier, but I think it makes sense to
use buildQuery here. It'll detect CCL, CQL, and PQF queries, as well
as parsing a regular keyword search as one would expect when searching
the catalogue.
It also has the added bonus of performing relevance searching,
so long as QueryAutoTruncation is off, and so long as library staff
avoid using the "*" truncation wildcard (see bug 12430).
While there are simpler ways to fix this acq bug, I think this was
probably the best move, as it adds a bit to the consistency of what
librarians can expect from their search results.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Same result with and without the patch but I agree with the changes.
BuildQuery should be called before SimpleSearch if QP is not used.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to search orders using the basket creator.
Test plan:
- go on the order advanced search form (acqui/histsearch.pl)
- use the autocomplete input to search patrons
- launch the search and verify the results are consistent with the
values you have filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/basketgroup.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Close the basket and create the corresponding basket groups.
4/ Print the basket group
5/ Verify you don't see any difference before and after applying the
patch on the pdf file.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In parcel.tt, total are calculated for subtotal.
This could be done in the pl script for more consistency.
Test plan:
Go on a parcel page with several already received orders.
Orders must be linked to different funds.
If possible ecost and unitprice (price on ordering and on receiving)
should changed (different values will be displayed in the table).
The values displayed before and after the patch must be the same.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For already received orders, the total should be calculated with the
unitprice, not the estimated cost.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/parcel.pl script.
Test plan:
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Go on the parcel page
4/ You should see, on the "pending orders" table, the same prices as
before this patch.
Note that the prices are now correctly formated.
You could see one change for the supplier configuration 3 (1 0):
If the cost of the item is 82, discount 10% and vat 5%:
The "Order cost" = 140.58 instead of 140.57.
Indeed, before this patch, the order cost was wrong, now you should have
70.29*2 = 140.58
( before: 140.58 + 7.03 = 147.61
now: 140.58 + 7.02 = 147.60 )
5/ Receive the items and return on the parcel page
Now the "Already received" table with the same prices as before this
patch.
Note some differences too:
- There was a td tag missing, the table was badly formated, it's now
fixed (column below the "Cancel receipt" link).
- The prices are now correctly formated.
- For the configuration 2 (1 1), if the cost of the item is 82, discount
10% and vat 5%:
( before: 140.57 + 7.03 = 147.60
now: 140.58 + 7.02 = 147.60 )
Note that 7.03 is the "correct" value, but on all other pages, 7.02 is
displayed.
To be consistent, we should display the same prices everywhere.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Bookseller module and put in
it the code from GetBookSeller and GetBookSellerFromId.
Test plan:
1/ Create a bookseller, modify it.
2/ Add contacts for this bookseller
3/ Create an order, receive it, transfer it
4/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 5336 introduced some code which should have been introduced by bug
7294.
Since the idea behind bug 7294 has been abandoned (map the aqorders
fields), the code can be removed.
Test plan:
Verify that Koha does not allow you to map the aqorders fields with a
MARC subfield.
Verify there is no regression on adding/updating an order.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The aqbooksellers.gstreg is never used in the code.
This patch does not remove the DB field but 3 useless occurrences in the
neworderempty page.
The both variable applygst and gstreg have never been took into account for prices calculation.
Test plan:
Verify there is no difference before and after the patch in the prices
calculation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TEST PLAN:
1. Load 167 staged files to Koha.
2. Try to make an acquisiton from a staged file.
3. Wait 16s for the acqui/addorderiso2709.pl -view to load.
AFTER PATCH:
1. Load 167 staged files to Koha.
2. Try to make an acquisiton from a staged file.
3. Wait 1.6s for the acqui/addorderiso2709.pl -view to load.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently only the suggestion manager can order from accepted
suggestion.
This patch set to default the ability to show all suggestions when
ordering from a suggestion.
2 links "show only mine" and "show all" permits to filter/show all
permissions.
Test plan:
Create an order from a suggestion and verify you are able to see all
suggestions by default.
Verify the "show only mine" link works as expected.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The format method was not called.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
No regressions found, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There are some places where the price format is defined.
All these occurrences should be removed use the way introduced by bug
12844.
Test plan:
1/ Verify you don't see any price formatting change on the basketgroup pdf
(for layout2pages, payout2pagesde, layout3pages and layout3pagesfr).
2/ On admin/aqbudgetperiods.pl, the budget total should be unchanged
too.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The method C4::Budgets::GetBudgetHierarchy() retreives from database budgets in an array containing a tree of budgets (parent -> children -> children, ...).
The code generating this tree with the SQL results needs optimization because when a lot of budgets exists, it can run during several minutes.
This patch rewites the code using a recurive method.
Test plan :
- Create a active budget "MyBudget" with 1000
- Click "Add found" on this budget
- Create a found "Parent" with 1000, set you has owner
- Click "Add child found" on found "Parent"
- Create a found "Child" with 100, set you has owner
- Click "Add child found" on found "Child"
- Create a found "Grand-child" with 10, set you has owner
|
- Create a new acquisition basket
- Add a new order with "Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Add a new order with "Grand-Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Close basket
- Perform the receive of the two orders
|
- Go to founds of "MyBudget"
=> You see a table with 3 founds
- in "Fund filters", select no library and uncheck "Show my funds only" and click on "Go"
=> You see a table with "Parent" found
- Click on small arrow left of the fund code of "Parent"
=> You see a new line with "Child" found
- Click on small arrow left of the fund code of "Child"
=> You see a new line with "Grand-Child" found
|
=> You see in "Grand-Child" row "Base-level spent" = 2 and "Total sublevels spent" = 2
=> You see in "Child" row "Base-level spent" = 2 and "Total sublevels spent" = 4
This confirms the founds are used in a hierarchie.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Remove tab characters in acqui/addorder.pl
* Remove FIXME in acqui/cancelorder.pl
* Fix typos: "canceled" -> "cancelled", "occured" -> "occurred"
* Replace "Click here" link by "OK"
* Add a column to aqorders to store cancellation reason instead of
having it in aqorders.notes, to avoid having untranslatable strings in
database
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some code was duplicated, all is now in cancelorder.pl
Added possibility to provide a reason for cancellation (or other things,
this is saved in aqorders.notes)
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Order module and put in
it the code from NewOrder and NewOrderItem.
Test plan:
1/ Create an order, modify it, receive it, cancel the receipt.
2/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch use the new module into pl and tt script.
Note that we could use it in the acqui/pdfformat/layout*.pm files.
Test plan:
1/ Verify that the acquisition home page displayes the prices as before.
2/ Verify that the budgets page displayes the prices as before.
3/ Verify that the funds page displayes the prices as before.
4/ Verify that the planning page displayes the prices as before. (Note
that 1 price is now formatted: 'Fund remaining').
5/ Create an order from a staged file. This stage file should contain a
formatted price.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the basketno parameter is needed to insert an order, it is useless
to return it.
This patch changes the prototype for the C4::Acquisition::NewOrder
subroutine. The return value is now a scalar containing the ordernumber
created.
Test plan:
Verify there is no regression on an acquisition workflow:
1/ Create an order with several items
2/ Modify the order
3/ Receive some items
4/ Cancel the receipt
4/ Receive some items
5/ Receive all remaining items
6/ Cancel the receipt
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to include SRU servers in Z3950 search.
It adjusts the Z3950Search routine in Breeding module.
It also replaces SQL code with DBIx statements in Breeding.pm/Z3950Search
and the associated scripts z3950search.pl in cataloguing and acqui.
Test plan:
Verify if a normal Z3950 search still works in cataloging/acqui.
Add a SRU target. (You could just use Koha's port 9998.)
Define sru_options like sru=get.
Use that target in a Z3950 search in cataloging and acqui. (Import.)
Test sru_fields translation by comparing search results between various
settings for some of the fields. For instance, leave title empty and
after that set it to the title field of your SRU target.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Replaces name by servername, type by servertype for running Z3950 search.
Limit search scripts to zed (z3950) servers until sru is supported.
Test plan:
Perform a Z3950 search in Cataloguing and Acquisition.
Verify that it still works as it did.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to choose a particular contact for
acquisitions and serials claims. To test:
1) Select a contact to use for claiming late orders and a contact
to use for claiming late issues.
2) Send a claim for a late order and a claim for a late issue.
3) Note that the claims went out to the proper people.
4) Run the unit test with:
> prove t/db_dependent/Letters.t
5) Sign off.
Note: the claim messages are recorded in the logs in the *Acquisitions*
module, not the Letters module as you might expect
This patch also fixes several perlcritic violations and centralizes
contact-related unit testing in Bookseller.t.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some vendors may have more than one contact. For example, a technical
contact and a billing contact, or a contact for journals and a contact
for monographs. Rather than require that each contact be either made
into a separate vendor or recorded somewhere outside of Koha, it would
be really useful of Koha had the ability to add multiple additional
contacts to vendors in the Acquisitions module.
To test:
1) Apply patch.
2) Edit a bookseller, making sure to add a contact.
3) View the bookseller's information, making sure the contact
information is there.
4) Run the unit test:
> prove t/db_dependent/Bookseller.t
5) Add multiple contacts to a vendor, see that they show up.
6) Delete one contact from a vendor with multiple contacts,
see that the result is correct.
7) Sign off.
Note: This test plan can supersede that on the previous two patches,
as all functionality of the previous two patches is required by this
one.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
