Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
4a) that the page does work as before
4b) there is ne "Column visibility" button in datatable toolbar
4c) the column configuration does work as expected
4d) there is new column "First patron" with link to patron which is
first in holds queue for given record
4e) sorting works ax expected
4f) filters (in teh bottom of table) work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!
https://bugs.koha-community.org/show_bug.cgi?id=18079
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
`git grep ManualLocation` does not return any results
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
On previous bugs
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The GetMemberIssuesAndFines subroutine used to retrieve the issues,
overdues and fines for a given patron. Most of the time, only 1 or 2 of
these values were used.
This patch removes this subroutine and uses the new get_issues,
get_overdues and get_balance method from Koha::Patron and Koha::Account::Lines.
Test plan:
1/ Add overdues, issues and fines to different patrons
2/ On the checkout, checkin and patron search result and the patron
detail pages, these 3 informations, if displayed before this patch, must be
correctly displayed.
3/ Use the batch patron deletion tool and make sure that patrons with a
balance > 0 are not deleted
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ignoring the pluralization or lack thereof:
$ git grep "Koha::Issue"
-- This has results.
But this was renamed by 17796, and supposedly still
in discussion in 16870.
apply this patch, and do the same git.
There will be no results.
This was found while running a prove t/db_dependent/00-strict.t
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply patch
2) Checkout more then one item to a borrower
3) Check one of that items
4) Note, that on in returns table there is a button with number of
outstanding issues in patron column. The button should take you to checking
out page
5) When the outstanding issues count is 0, there is no button
Signed-off-by: Radek Šiman <rbit@rbit.cz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
All the values different from the ones GetMember returned has been
managed outside of GetMemberDetails.
It looks safe to replace all the occurrences of GetMemberDetails with
GetMember.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as authflags, a flags key is set containing all the patron flags.
It is only used in a few places and it's better to call
C4::Members::patronflags when we need it.
Test plan:
Look at the diff and confirm that the change make sense
Use git grep to confirm we do not use the flags somewhere else.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Number of tests in Patrons.t corrected.
Method is_going_to_expired (no english!) renamed to is_going_to_expire.
Adding a negative duration replaced by a subtract. Reads easier.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to be consistent, we need to create this method as well.
Test plan:
Make sure the pref NotifyBorrowerDeparture works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17579 introduces a Koha::Patron->is_expired method.
Let's use it from this script.
Test plan:
Confirm that you see the message on the interface from the circulation
page for an expired patron
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Ok I am silly, we needed to replace to use the cache mechanism for
search_by_koha_field, not find_by_koha_field...
Let's create another subroutine
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds output of subtitle to the holds to pull report using
keyword to MARC mapping information.
To test, apply the patch and go to Circulation -> Holds to pull. The
list of holds to pull should display subtitles.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subtitle added using keyword to MARC mapping with default framework.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If an issue marked as auto_renew is renewed manually, we want to display
the latest auto renew date possible.
Test plan:
1/ Define circ rules as in the previous patch.
2/ Check a item out, mark it as an auto renewal
3/ Back date the issuedate and make sure it will be too late to renew it
4/ Use the Circulation > renew page (circ/renew.pl) to manually renew
this issue.
You should get a warning "You barcode has been scheduled for automatic renewal
and cannot be renewed anymore since DATE."
If the pref AllowRenewalLimitOverride is set, you will be allowed to
renew it anyway.
Sponsored-by: University of the Arts London
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Apply the patch
2) Update DB structure
3) Run update_dbix_class_files.pl
4) Select patron for checking out
5) Try to add some circulation and opac messages
6) Note that now there is creator (you ;) ) shown by every message added (with link to creator profile)
7) Try to delete messages to confirm that everything works as expected
Signed-off-by: Sonia Bouis <koha@univ-lyon3.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This was the "Get" subroutine for the framework, it can be easily
replaced with a call to the Koha::BiblioFrameworks->find method.
This patch also replaces some confusing wordings (framework vs frameworkcode).
Test plan:
On the circulation home page, you should see a "Fast cataloguing" link
if the FA framework exists.
Note that the admin/marctagstructure.pl has already been tested in the
previous patch.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Link pops Ok
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the call to C4::Koha::GetKohaAuthorisedValues with
Koha::AuthorisedValues->search_by_koha_field
Test plan:
AV descriptions should be displayed on the following pages:
- XSLT view - location and ccode
- Bibliographic detail, moredetail and OPAC pages - location, ccode, copynumber
- returns - location
- opac-basket - ccode, location
- The 3 reports: catalogue_stats.pl, issues_stats.pl and
reserves_stats.pl - location, ccode
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthorisedValueByCode returned the
description (staff or opac) for a given authorised value.
Note that we may need a unique key to ->find instead of ->search.
Test plan:
- Checkin an item that cannot be checked in because it's lost, the
message should display the AV description
- Generate a letter with borrowers.streettype equals an ROADTYPE AV, the
description should be displayed.
- Edit a patron attribute type, the AV dropdown list should be
displayed
- Create the PA_CLASS AV category (see bug 7154) and make sure it
behaves as before when editing a patron
- The checkout list should display descriptions for LOC, LOST and
DAMAGED
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
GetAuthValCode did not return anything if the authorised_value column
was not defined. Our new calls to Koha::MarcSubfieldStructures->search
should behave the same
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetAuthValCode returned the authorised value
category for a given kohafield.
This can be acchieve easily using a new Koha::AuthorisedValues->search_by_koha_field
method which will mimic search_by_marc_field.
Test plan:
Confirm that the description is correctly displayed on the following
pages:
- detail and moredetail of a bibliographic page (itemlost, damaged, materials)
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc.
field should be displayed.
- Items search form
- On the checkout list from the circulation.pl and returns.pl
pages, the description for "materials" should be displayed
Note that GetKohaAuthorisedValuesMapping is going to be removed on bug
17251.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The subroutine C4::Koha::GetKohaAuthorisedValueLib just retrieves a description
(lib) for a given authorised value.
We can easily replace it using:
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->lib
or
Koha::AuthorisedValues->search({ category => $cat, authorised_value => $av })->opac_description
Test plan:
- On the detail page of a bibliographic record, the description for notforloan,
restricted and stack (?) should be correctly displayed
- View a shelf, the location (LOC) description should be displayed
- On the search result page, the location description should be displayed in the
facets
- Set AcqCreateItem=ordering and receiving items.
The description for notforloan, restricted, location, ccode, etc. field
should be displayed.
- When creating item in the acquisition module, the dropdown list for
field linked to AV should display the AV' descriptions
- On the transfers page, the description of the location should be
displayed.
- On the checkout list from the circulation.pl and returns.pl pages, the
description for "materials" should be displayed
- Fill some OPAC_SUG AV and create a suggestion, the reason dropdown
list should display the description of OPAC_SUG
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The patron search type is hard coded to 'contain' in
circ/circulation.pl.
This causes problems because a mis-scanned cardnumber can bring up the
wrong patron.
The example that our partner gave us involved scanning '1733', which
doesn't match any borrowers when we do a 'start_with' search, but
matches the cardnumber 'p291733'.
If we follow the usage in members/member.pl, we can set searchtype in
HTTP params, which is amenable to fixes in intranetuserjs
Test Plan:
1) Apply this patch
2) Use the checkout search, not changes should be noted
Extra credit:
1) Add javascript to intranetuserjs to add a hidden input named
'searchtype' with the value 'start_with'
2) Checkout searches should now give only results where a searched
field starts with the given string(s)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some librarians find it useful to know what category a patron is before
confirming a reserve or transfer from the checkin screen.
This patch adds the patron category to the hold and transfer popups
to the patron information already displayed. The li tags that contain
the patron category have the class "patron-category" to allow this data
to be easily hidden.
Test Plan:
1) Apply this patch
2) Trap a hold for a patron, note the patron category is now displayed
3) Trap a hold for pickup at another loation, note the patron category
is now displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In previous versions of Koha, if a hold canceled from the "Holds over" tab had other holds on it,
the librarian would be alerted with the message "This item is on hold for pick-up at your library"
and directed to check it in to fill the next hold. This no longer happens.
Test Plan:
1) Apply this patch
2) Find a hold that has been waiting too long
3) Cancel that hold via waitingreserves.pl
4) Note you get the message "This item is on hold for pick-up at your library"
5) Confirm the ok button redirects you to the correct tab
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Use case: A patron checks some items out on-site and want to take it home.
To facilitate the librarian work the checkout is directly switched from
on-site to regular when checked out if the new pref SwitchOnSiteCheckouts is on.
Test plan:
0/ Let the new pref SwitchOnSiteCheckouts off
1/ Checkout one items to a patron and tick the "on-site checkout"
checkbox
2/ Check the same item out without ticking the "on-site checkout"
checkbox
=> You should get "This item can not be renewed, it's an on-site checkout"
3/ Switch the pref on
4/ Repeat 2
=> The on-site checkout should be automatically switched to a regular checkout
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small changes to apply to master.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is the fourth and last patch set to remove C4::Branch.
The real purpose of this patch is to standardise and refactor some code
which is related to the libraries selection/display.
Its unconfessed purpose is to remove the C4::Branch package.
Before this patch set, only 6 subroutines still existed in the C4::Branch
package:
- GetBranchName
- GetBranchesLoop
- mybranch
- onlymine
- GetBranches
- GetBranch
GetBranchName basically returns the branchname for a given branchcode.
The branchname is only used for a display purpose and we don't need to
retrieve it in package or pl scripts (unless for a few exceptions).
We have a `Branches` template plugin with a `GetName` method which does
exactly this job.
To achieve this removal, we will use this template plugin and delete the
GetBranchName from pl and pm files.
The `Branches.all()` will now select the library of the logged in user
if no `selected` parameter has been passed.
This new behavior could cause regressions, for instance there are some
places where we do not want an option preselected (batch item
modification for instance), keep that in mind when testing.
GetBranchesLoop took 3 parameters: $branch and $onlymine.
The first one was used to set a "selected" flag, for a display purpose:
select an option in the libraries dropdown lists.
The second one was useless: If not passed or set to 0, the
`C4::Branch::onlymine` subroutine was called.
This onlymine flag was use to know if the logged in user was able to see
other libraries infos.
A patron can see the infos from other libraries if IndependentBranches
is not set OR if he has the superlibrarian permission.
Prior to this patch set, the "onlymine test" was done on different
places (neworderempty.pl, additem.pl, holidays.pl, etc.), including the
Branches TT plugin. In this patch set, this test is only done on one
place (C4::Context::only_my_library, code moved from
C4::Branch::onlymine).
To accomplish the same job as this subroutine, we just need to call the
`Branches.all()` method from the `Branches` TT plugin. It already
accepts a `selected` parameter to set a flag on the option to select.
To avoid the repetitive
[% IF selected %]<option selected="selected">[% ELSE %]<option>[% END %]
pattern, a new `html_helpers` TT include file has been created, it
defines an `options_for_libraries` block, which takes a `selected`
parameter. We could imagine to use this include file for other
selects.
The 'mybranch` and `onlymine` subroutines of the C4::Branch package have
been moved to C4::Context. onlymine has been renamed with
only_my_library. There are only 4 occurrences of it, against 11 before
this patch set.
There 2 subroutines are Context-centric and it makes sense to put them
in `C4::Context` (at least it's the least worst place!)
GetBranches is the tricky part of this patch set: It retrieves all the
libraries, independently of the value of IndependentBranches.
To keep the same way as the existing calls of `Branches.all()`, I have
added a `unfiltered` parameter. If set, the `Branches.all()` will call
a usual Koha::Libraries->search method, otherwise
Koha::Libraries->search_filtered will be called. This new method will
check if the logged in user is allowed to see other libraries or only
its library.
Note that this `GetBranches` subroutine also created a `category` key:
it allowed to get the list of groups (of libraries) where this library
existed. Thanks to a previous patch set (bug 15295), this value was
not used anymore (I may have missed something!).
Note that the only use of `GetBranch` was buggy (see bug 15746).
Test plan (for the whole patch set):
The best way to test this whole patch set is to test with 2 instances: 1
with the patch set applied, 1 using master, to be sure there is no
regression.
It would be good to test the same with `IndependentBranches` and the
without `IndependentBranches`.
No difference should be found.
The tester must focus on the library dropdowns on as many forms as
possible.
You will notice changes in the order of the options: the libraries will
now be ordered by branchname (instead of branchcode in some places).
A special attention will be given to the following page:
- acqui/neworderempty.pl
- catalogue/search.pl
- members/members-home.pl (header?)
- opac/opac-topissues.pl
- tools/holidays.pl
- admin/branch_transfer_limits.pl
- admin/item_circulation_alerts.pl
- rotating_collections/transferCollection.pl
- suggestion/suggestion.pl
- tools/export.pl
Notes for QA:
- There are 2 FIXMEs in the patch set, I have kept the existing behavior,
but I am not sure it's the good one. Feel free to open a bug report and
I will fill a patch if you think it's not correct. Otherwise, remove the
FIXME lines in a follow-up patch.
- The whole patch set is huge and makes a lot of changes.
But it finally will tremendously reduce the number of lines:
716 insertions for 1910 deletions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jason M. Burds <JBurds@dubuque.lib.ia.us>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Bob Birchall <bob@calyx.net.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When the TimeFormat system preference is set to "12 hour",
setting a filter on the due date can result in:
- no overdue loans being reported, even if there are some
that meet the criteria
OR
- overdue loans being omitted from the report if they
are due on the "until" date in the filter
This patch fixes this by replacing output_pref() with
DateTime::Format::MySQL to format the date filter values
to pass to the SQL query.
To test
-------
[1] Run the overdue report (circ/overdue.pl) and set a filter
on due date, using values that should bring up one or
more overdue loans.
[2] Note that zero overdue loans are returned (if using MySQL
5.5, 5.6, or 5.7 or MariaDB 5) or that loans due on the
"until" date are omitted (if using MarioDB 10).
[3] Apply the patch and repeat step 1. This time, the correct
set of overdue loans should be reported.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 16082, 'Display a friendly "patron does not exist" message if that's the
case - circulation.pl' changed the behavior of the checkout page so that if
you hit that page with a borrowernumber which doesn't exist a nice message will
tell you so.
Now when you do that you get an error message:
Can't call method "is_debarred" on an undefined value at /circ/circulation.pl line 300.
Test plan:
confirm that the friendly message is back :)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Indeed, it's not used!
Test plan:
git grep '\[% findborrower'
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Displays the items.enumchron-column in returns.pl when checking in Items.
Rewording commit
To test:
-Checkout a barcode for serial with items generated in
Serials > New subscription or item in DB with items.enumchron-column
-Checkin the same barcode, the table Checked-in items will appear without
information about "Publications details (Vol. 400, No. 32)"
-Apply patch
-Checkout and checkin another item of the same serial title
-Notice about the Vol. 400, No. 32 below the serial title.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
items.enumchron-column display successful in returns.pl (Home>Circulation>
Check in)
NOTE: Patch rebased on master
Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This regression is occurs because the time format for the checkout
date/time widget is only meant to be given in 24 hour format. The time
due should not be converted to 12 hr time even if the library has 12
hour set as their preferred time format.
Test Plan:
1) Performat a backdated checkout with a date due that has a PM time
2) Note the date/time picker on the confirmition screen shows the time
in AM/PM
2) Note the time is not stored correctly
3) Apply this patch
4) Repeate step 1
5) Note the confirmation date/time picker now show the time in 24hr
format
6) Note the time was stored correctly
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sounds weird to pass parameters to the action of a POST form.
This patch adds a workaround.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves all the code into an include which can be accessed from the 'Add a new message' link or the patron toolbar.
EDIT: Ensuring modal opens on all pages
EDIT2: Once the form has been submitted the page will redirect to where you submitted the form from.
EDIT3: Fixing indentation of member-add-message.inc
Ensuring messages save on every page
Fill branch
Ensure predefined notes appear
Form redirects to where it was submitted from, or just the circulation page.
EDIT4: Removing the new include file and moving it all into the modal in the toolbar
EDIT5: Removing swp file and unnecessary code duplication by utilising plugins
EDIT6: Batch checkout fixes
EDIT7: Ensure you do not get JS error from Comment 24 (Batch checkout syspref must be turned on)
To test:
1) Go to a patron circ page (circ/circulation.pl?borrowernumber=X)
2) Click 'Add a new message' under Messages
3) Confirm this brings up the modal to add a message. Confirm clicking Save saves your message. If it is an OPAC message (for the user), confirm it shows as expected on the OPAC.
4) Click Cancel. Confirm this closes the modal.
5) Click 'Add message' button in toolbar. Complete steps 3 and 4.
6) Confirm the modal opens from all other pages with the members toolbar. Confirm predefined notes shows.
circ/circulation.pl
members/moremember.pl
members/routing-lists.pl
members/statistics.pl
members/boraccount.pl
members/pay.pl
members/maninvoice.pl
members/mancredit.pl
members/readingrec.pl
members/notices.pl
members/member-flags.pl
members/member-password.pl
members/paycollect.pl
members/files.pl
turn on BatchCheckouts syspref and put in appropriate patron category
circ/circulation.pl?borrowernumber=X&batch=1
7) Confirm that the page redirects to where you submitted the form from once you have submitted it.
8) Go to Check Out tab and confirm your message saved (or OPAC, wherever you saved it)
Sponsored-by: Catalyst IT
Followed test plan, works as expected. (Re-tested for comment #24)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 10067 has introduced a regression on the sticky due date behavior:
If "remember for session" is checked and the due date is changed from 1
checkout to another, the old due date will be used.
The code added by bug 10067 is really confusing and it's hard to say
this patch won't introduce another regression.
The manipulation of $restoreduedatespec, $duedatespec and $stickyduedate
is not easy to follow.
Test plan:
Confirm that the regression is fixed and that this patch will not
introduced a regression on bug 10067 (good luck!)
Signed-off-by: Eivin Giske Skaaren <eivin@sysmystic.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
