Please test and confirm terminology is now correct.
Was unable to test without steps to reproduce.
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the Koha staff interface go to administration.
Go to TalkingTechItivaPhoneNotification. Enable this preference. Save.
Go to Tools > Overdue notice/status triggers
Check that ‘Phone (i-tiva)’ is an option for notice types.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the name and description of the QOTD tool in order
to make them more consistent with the other tool names and descriptions.
To test:
1) Go to Tools
2) Read the QOTD tool name and description, make sure they make
sense and that there are no typos
3) Test the link to make sure it goes to the tool
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
This enhancement changes recall fulfillment actions to log with the
FILL action. It will also update existing recalls FULFILL actions in
the database to use the FILL action.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules. Confirm RecallsLog is enabled.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Check out the item for Patron A to fill the recall.
7) Go to Tools -> Log Viewer. Confirm there is a FULFILL action. Choose
the following search params to browse system logs:
- modules: recalls
- actions: fill
8) Submit the search and confirm the recall DOES NOT show.
9) Apply the patch, update database, restart services.
10) Refresh the log viewer and repeat step 7. Submit the search and
confirm the recall DOES show. Confirm there is no longer a FULFILL
action as both holds and recalls will use FILL.
11) Check in the item.
12) Repeat steps 2-6. We are ensuring that future recalls are logged
using the FILL action.
13) Repeat step 7. Confirm all test recalls are now showing in search
results.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates some language in the inventory template to make it
readable and consistent: Punctuation fixed, capitalization made more
consistent, language corrections ("check in" instead of "return").
To test you can try to apply the patch and trigger the various errors in
the inventory interface, but it's probably enough to visually confirm
the changes in the patch.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The construct of [% ELSE %]0[% END %] breaks translations as it is
translated as [% ELSE %][% END %]. Note: No 0 in the ELSE statement.
This patchset either removes occurances of a lone 0 in template ELSE
statements, or splits it over multiple lines so the 0 is not removed in
the translated templates.
Test plan:
1. Install the en-NZ translation
2. Search the translated templates for '[% ELSE %][% END %]' and confirm
there are are instances of that
3. Apply patch
4. Update your en-NZ translation
5. Repeat step 2 and confirm there are no more instances of [% ELSE %][%
END %] in the translated templates
Note: I removed the [% ELSE %] statement from opac-bottom.inc as that
statement was empty in the en translation so it didn't look to be
needed.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart everything
2. Go to Tools > News and create some new additional content.
3. Notice a Save and continue button
4. Try saving and contining.
5. Make sure if you are using the CodeMirror editor that you are still in the CodeMirror editor
6. Try 2 - 5 again but with the wysiwyg editor, make sure when you save and continue you remain in the wysiwyg editor.
7. If you are saving and contining from News make sure you remain in News, when you are saving and contining from HTML customizations make sure you remain there.
8. Turn on the NewsLog system preference
9. With the NewsLog on make sure your content is being logged correctly when you sabe and continue.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They need more complex solutions that would be better in a follow up ticket
to not drag this one too long.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the 1st patch, sometimes they where left out
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the itemnumber and biblionumber attributes for
recalls having been renamed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Modifying an existing element of additional content (News) by changing
the library causes a duplication of the entry on the Additional contents
(News) list. A subsequent attempt of deleting one of the entries results
in deleting both of them. This is due to the fact that after
the unwanted duplication all the entries share the same
additional_contents.code.
Test plan
=========
1. Create a piece of news under Tools > News.
2. After having saved it make a modification by changing the library.
It should result in two rows in the table.
3. Delete one of the lines with Delete button. Both lines will
disappear.
4. Apply the patch.
5. Repeat the steps 1 and 2. Only the one (the modified) entry should be
present in the table.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the basket groups interface so that it doesn't rely
on YUI to move baskets in and out of groups. The patch also removes
all YUI assets and many long-obsolete references to YUI-related classes
and IDs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Go to Acquisitions.
- Locate a vendor with multiple closed baskets.
- Click "Basket groups" in the sidebar menu.
- Create or edit a basket group.
- On the basket group page you should see the basket group form in one
column and ungrouped baskets in another.
- Both grouped and ungrouped baskets should be in a sortable
DataTable.
- Test that when you click the "Add to group" button on an ungrouped
basket the row is removed from the table of ungrouped baskets and
added to the table of grouped baskets.
- The button text on the row should now read "Remove."
- Test the reverse operation: Clicking "Remove" on a grouped basket
should move it to the table of ungrouped baskets.
- Test that when all baskets are moved out of either of the tables a row
is displayed with a message specific to that table, e.g. "There are no
ungrouped baskets."
- Test that the basket group saves correctly when zero or more baskets
are added to the group.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
is sent with empty data.
Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the route to make it consistent for future additions.
To test:
1. Run
$ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
$ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
$ kshell
k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating or editing an additional content, the form is submitted if
only the title of the 'default' tab is filled in.
We should submit the form only if both title and content exist.
Test plan:
Create a new content using text editor (codemirror)
Confirm that the form is submitted only if title and content from the
default tab are not empty
Try again with wysiwyg (tinymce)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When the Upload tool is accessed on a smaller (mobile) screen (less than
768 pixels wide), the Upload and Browse buttons cannot be clicked. This
patch fixes that.
To test:
1) Go to Tools -> Upload
2) Make the screen narrower, either by opening your browser's Inspector
tool and using Responsive Design Mode, or by dragging in the edge of the
window to make it narrower.
3) Notice that when the screen becomes narrower than 768px, the sections
squash together and the padding between them is lost. Try to click on
the Browse and Upload buttons, notice you cannot.
4) Apply patch and refresh the Upload Tool
5) Ensure the screen is narrower than 768px. Confirm there is now
padding between the sections, and the buttons are clickable again.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Sign in as a superlibrarian
2 - Tools->Batch patron modification
3 - Add patrons with and without pasword expiration set
4 - Confirm dates display correctly on modification page, or show never
5 - Check the box to delete all dates
6 - Confirm patrons now show 'Never'
7 - Edit patrons again, set a date
8 - Confirm date is set correctly
9 - Sign in as a user with catalogue/tools/borrowers permissions, but not superlibrarian
10 - Confirm y9ou do not see, and cannnot edit password expiration dates
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch converts jQueryUI tabs on three tools templates to Bootstrap
tabs. The patch contains indentation changes, so diff accordingly.
To test, apply the patch and go to Tools -> Export.
- You should see at least two tabs, "Export bibliographic records" and
"Export authority records."
- Confirm that they look correct and work correctly.
Go to Tools -> Batch patron modification.
- Check the "By card number," "By borrowernumber," and "By patron list"
tabs.
Go to Tools -> Overdue notice/status triggers.
- Check the "First," "Second," and "Third" tabs.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The way Bootstrap tabs manipulate the DOM, CodeMirror has problems
initializing correctly, I think because of redraws and CodeMirror's
attemps to position things absolutely.
The solution seems to be to wait until after a Bootstrap tab has
activated before initializing the CodeMirror instance. This patch
implements that, along with a check to prevent double-initializing the
same textarea.
I've also made a similar change to the way TinyMCE is initialized, which
I hope will help with the issue of the editor not always loading
correctly.
To test, apply the patch and go to Tools -> HTML customizations.
- Test creation and editing of HTML customization entries using both
the default editor and the text editor (Edit -> Edit with text
editor).
- Verify that the editor (CodeMirror or TinyMCE) loads correctly and
looks correct, both upon page load and upon switching tabs between
"Default" and other language tabs
- Verify that your edits are saved correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch converts jQueryUI tabs on three tools templates to Bootstrap
tabs.
To test, apply the patch and go to Tools -> HTML customizations.
- Click "New entry."
- On the entry form you should see two tabs, "Default" and "English
(en)"
- The tabs should look correct and work correctly.
Go to Tools -> Batch record deletion.
- Test the three tabs: "Upload a file", "Select a list of records", and
"Enter a list of record numbers."
Go to Tools -> Batch record modification.
- Test the same three tabs on this page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Previously the sorting took 'chosen' into account and would move a selected match to the
top on next load - it is better to preserve the same sorting every time
When loading matches the 'cehcked' variable was not being cleared, so multiple matches were
being marked 'checked="checked"'. Fixing this ensures the correct record displays as chosen
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset adds the display of all matches found during import to the import management screen
A staff member with the permission to manage batches will be able to select for any individual record which match, or none, should be used during import
To test:
1 - Import a batch of records or export existing records from your catalog
2 - Import the file (again) and select a matching rule that will find matches
3 - Note that you now have radio buttons allowing you to select a record, or none
4 - Test scenarios:
I - When 'Action if matching record found' is 'Ignore'
a - Imported record ignored if match is selected
b - 'Action if no match found' followed if no match is selected (Ignore matches)
II - When 'Action if matching record found' is 'Replace'
a - The chosen record is the one overlayed (you can edit the chosen record before importing to confirm)
b - 'Action if no match found' followed if no match is selected (Ignore matches)
III - When 'Action if matching record found' is 'Add incoming record'
a - Record is added regardless of matches
5 - Confirm 'Diff' 'View' links work as expected
6 - Confirm that after records are imported the radio buttons to choose are disabled
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Bug 22785: API files
Signed-off-by: Ben Daeuber <bdaeuber@cityoffargo.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the notices edit interface in order to replace
jQueryUI accordion and tabs widgets with Bootstrap collapse and tabs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Set the TranslateNotices system preference to "Don't allow."
- Go to Tools -> Notices and edit any notice.
- On the "Modify notice" page you should see three collapsed sections:
Email, Print, and SMS.
- Clicking the section headings should expand and collapse the panels.
- With one of the panels open, click Save -> Save and continue editing.
- When the page reloads the same panel should be expanded.
- Enable the TranslateNotices system preference.
- Return to the edit interface for one of your notices.
- You should now see at least two tabs: Default and English.
- The sections under each tab should continue to work correctly.
- Test the "Save and continue" functionality again. When redirected you
should return to both the correct tab and the correct panel, e.g. the
"Print" section under the "English (en)" tab.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
bug 28014 added Datatables to this view, but the form is submitted with
only the checkboxes from the first page.
Solution adapted from https://stackoverflow.com/questions/33240409/how-to-submit-checkboxes-from-all-pages-with-jquery-datatables
Test plan:
Have more than 20 cardnumbers, use the batch patron modification tool
Select (not all) patrons from the first page and second page
Submit the form
Notice that the patrons you have selected appear on the confirmation
page.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We could add the configuration to these tables as well, but let go first
but the others (read: feeling lazy right now).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Tools batch record modification/deletion form contains texts in legends, labels, hints.
I feel like :
Labels are sometimes too long, showing them on multi-lines, like "Modify record using the following template". Long texts should be in legend or hint.
Legend are sometimes contains redundant text, like in tabs.
Also I propose to use "record id" instead of "record number".
Test plan :
Compare texts in page without and with patch
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch provides easy access to the OPACUserJS and OPACUserCSS
system preferences in the Additional Contents (News and HTML
customisations) sections.
To test:
1. In the staff client, go to Tools -> News. Notice there is a button to
add a New entry. Confirm this button is also there when you go to
Tools -> HTML customisations.
2. Apply the patch and refresh the page.
3. Confirm there are now two new buttons to take you to OPACUserJS and
OPACUserCSS. Confirm these buttons take you to the correct system
preference.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 30288: (follow-up) Add permissions check
This follow-up wraps the system preference links in a check for
"parameters_manage_sysprefs" permission so that the links don't display
to those without permission to access system preferences.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates all references to the former ACCTDETAILS notice to
use the new WELCOME email notice instead.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds the ability to send the ACCTDETAILS notice for new users
added using the patron import tool.
Test plan
1. Create a valid csv for patron import that includes some new users,
ensuring you add a valid email address for which you have access.
2. Import the users using the patron import tool and select the new
'Send email to new patrons' checkbox.
3. Check that the notice appears in the new patrons notices
4. Check that you received a welcome email for the user.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed file to have one <h1> tag showing that describes the page,
rather than the <h1> around the logo.
The hierarchy of other heading tags may be wrong, but this will be
dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to tools/marc_modification_templates and check that it has an
obvious and descriptive heading
4) Ensure that the heading is <h1>
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Changed each of the pages in the tools and virtualshelves folders to
have one <h1> tag showing that describes the page, rather than the <h1>
describing the logo.
The hierarchy of heading tags may be broken in many pages, but this
will be dealt with in an additional bug.
To test:
1) Go to the Staff Client
2) Apply patch
3) Go to each of the pages in the tools and virtualshelves folders and
check that they have an obvious and descriptive heading
4) Ensure that the heading in the page is <h1>
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves most of the JavaScript from upload-images.tt into a
separate file, upload-images.js. Functionality should be unchanged.
To test, apply the patch and go to Tools -> Upload local cover image.
Test all the things:
- Drag-and-drop upload
- Click-to-browse upload;
- Deleting existing images
- Uploading a zip file
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To be nicer with translators.
Update the PO files for whichever languages will show how this is
useful.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>