They are not usable.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Debugging various problems in SIPServer and control of it, found it
could loop on unread buffers (e.g. the LF of a CRLF if it was only
expecting CR) making it unresponsive to signals.
Reworked the input loop with an eye to removing unnecessary whiles
and replacing the while(1) by a while( connection valid)
Enhanced the timeout code by wapping in an eval.
Moved the logic from SIP_read_packet into the server itself
Hopefully this makes the already baroque code easier to navigate
and it did seem the server was the logical place for this
Removed no longer iused SIP_read_packet from Sip.pm
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) prove t/db_dependent/Languages.t
-- noisy output
2) apply patch
3) prove t/db_dependent/Languages.t
-- no noise
4) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No noisy output
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes C4::Members::DelMember proprely use Koha::Holds to delete
holds. This is important as holds actions are started to be logged.
To reproduce:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::DelMember function actually deletes reserves, and it is
not properly tested.
To test:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off
Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply second test patch
4) prove t/db_dependent/Letters.t
-- dies before finishing tests
-- 'addalert' is changed to 'getalert'
5) Log into OPAC with database admin user.
-- see error given in comment #0
6) Apply this patch
7) prove t/db_dependent/Letters.t
-- says 'getalert'
-- all tests pass.
8) Log into OPAC with database admin user.
-- logs in, but gives warning with a nice logout button.
9) run koha qa test tools.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
No kaha qa errors
In debian display diferent error:
Can't use an undefined value as an ARRAY reference at /usr/lib/perl5/DBI.pm line 2054.
Works as advertised
NOTE: Revised test plan, as Jonathan added useful test case.
Works as I've tested above.
Hector tested older test plan which was steps
5,6,8 and 9.
Revised test plan again while tweaking to address comment #9.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It said 'addalert', which is likely a cut-paste typo.
Plus, let's keep running the other tests if that one
goes bad.
TEST PLAN
---------
1) Apply Jonathan's test patch
2) prove t/db_dependent/Letters.t
-- dies before finishing tests
3) Apply this test patch
4) prove t/db_dependent/Letters.t
-- still dies before finished tests,
'addalert' now is 'getalert' in message.
5) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TEST PLAN
---------
1) apply patch
2) prove t/db_dependent/Letters.t
-- fails
3) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For purpose to uniformity and leave just one entry in .po files,
this patch change: Check all/Uncheck all -> to -> Select all/Clear all.
Also added Font Awesome icons.
To test:
-Go to Administration > Library transfer limits
-Notice about Check all/Uncheck all for "For all items types" and
"Policy for:"
-Apply patch and refresh the screen
-Notice about the new Select all/Clear all links with their icons
-Confirm that all links work as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a proof-of-concept for replacing Greybox modals in
situations where in-modal page transitions happen. This one addresses
patron card export from the patron lists page.
To test you must have at least one patron lists containing patrons.
- Apply the patch and go to Patrons -> Patron lists.
- In the 'Actions' menu associated with your list, choose 'Print patron
cards.' A modal window should be triggered.
- In the modal window, change settings as necessary and click the
"Export" button.
- The modal should reload and display a link to download a PDF. Confirm
that the PDF download works correctly and that the correct patron
batch was processed.
- Repeat the process and confirm at each step that clicking the 'X'
button or the 'Cancel' link dismisses the modal window.
To confirm that changes to the patron card print template has not
adversely affected printing patron cards from the patron card creator
page:
- Go to Tools -> Patron card creator.
- Choose Manage -> Card batches.
- Click 'Export' for any batch.
- Confirm that the Greybox modal still works correctly for patron card
export.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
- Apply patch
- Create a new patron with the same first and last name as an existing
patron. This should trigger a duplicate warning message. Click the
"View existing record" link to trigger a pop-up window with a patron
detail brief view.
- Verify that the address information displays the same way as on the
patron details screen (moremember.pl).
- Change syspref 'AddressFormat' and verify that the address displays
as appropriate.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described: AddressFormat is taken into account on 'view exiting
record' dialog box.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In authorities search results, UNIMARC flavour, linked headings are displayed
with a link type : BT, NT, UF, RT.
This patch adds a abbr tag around those acronyms to know there meaning :
BT = Broader Term
NT = Narrower Term
UF = Used For
RT = Related Term
Acronyms are used because there can be a lot of linked headings, using abbr
will display the complete text on mouse over.
Test plan :
- Use UNIMARC database
- Create an authority with :
250 $a Heading250a
450 $a Heading450a
550 $5 a $a Heading550a
550 $5 g $a Heading550g
550 $5 h $a Heading550h
- Save an index zebraqueue
- Go to intranet authorities search
- Search for "Heading250a"
- You see :
Heading250a
Heading250a
UF: Heading450a
RT: Heading550a ; BT: Heading550g ; NT: Heading550h
- Move your mouse over the acronyms, you see a tip with the complete text
- Same with opac authorities search
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Works as described. Translatable.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch modifies the style of some "print slip" links on the checkin
page to make them consistent with other buttons shown in dialogs.
This patch also removes the use of "onclick" in some places in favor of
defining events in the JavaScript.
To test apply the patch and go to Circulation -> Check in.
- Check in an item which belongs at another branch. You should see a
dialog which asks the user to transfer the item. Confirm that the
"Print slip" button looks correct and works correctly.
- Check in the same item again. You should see a different dialog which
has both a "Print transfer slip" and "Cancel transfer" button. The
"Print transfer slip" button should look correct and work correctly.
- Check in an item which is part of a rotating collection. (Or, if Bug
16570 is still open, check in any item) You should see a dialog which
notifies you that the item is part of a rotating collection. The
"Print slip" button in this dialog should look correct and work
correctly.
Followed test plan. Buttons appear as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Revision following QA: Removed redundant class attribute from the print
button tested in step 1.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes the Search button in the header into a dropdown that holds the Advanced search and the Item search.
I have rewritten this patch to be independent of Bug 16323 since that patch is so controversial.
To test:
1) Confirm that Advanced search and Item search are both under the 'Search' dropdown menu in the header and both links work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note that the CAN_user_catalogue test is useless. If a librarian does
not have it, (s)he cannot access to the staff interface.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
borrowernumber parameter is no longer required and you can filter on
every column of reserves table
Some example requests
- GET /api/v1/holds
- GET /api/v1/holds?biblionumber=123
- GET /api/v1/holds?borrowernumber=456
- GET /api/v1/holds?priority=0&found=W
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Display br and span tag only if the value enumchron exists.
To test
-Apply patches
-Follow the previous test plan
-Checkin whichever material (e.g., book) without sequence or enumchrom
-Open up source code for checkin page, search under title and
verify that b and span tags do not appear
Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Displays the items.enumchron-column in returns.pl when checking in Items.
Rewording commit
To test:
-Checkout a barcode for serial with items generated in
Serials > New subscription or item in DB with items.enumchron-column
-Checkin the same barcode, the table Checked-in items will appear without
information about "Publications details (Vol. 400, No. 32)"
-Apply patch
-Checkout and checkin another item of the same serial title
-Notice about the Vol. 400, No. 32 below the serial title.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
items.enumchron-column display successful in returns.pl (Home>Circulation>
Check in)
NOTE: Patch rebased on master
Signed-off-by: Alain et Aurélie <aurelie.berut@enssib.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If limit is X and patrons has X-1 pending suggestions, when a new one is
added, the "New suggestion" should not been added.
to avoid another call to SearchSuggestions, we assume than the
suggestion has been correctly added.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This does not work correctly and should be handle on another bug report.
The behavior existed prior to this patchset.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Only check limit for signed in borrower
Show all suggestions after a new one is added
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Also fixes the issue that the add suggestion link would sometimes
show even if the patron could not make an additional suggestion.
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Define a number of MaxOpenSuggestions
2 - Add some suggestions for a patron
3 - Note they cannot add any more suggestions if limit is reached
4 - Delete a suggestion and note you can add another
5 - Add them to limit again
6 - Accept a suggestion in the staff client and note user can add more
7 - Repeat above with rejecting or deleting
8 - Sign off.
Sponsored by:
North Central Regional Library (http://ncrl.org/)
Signed-off-by: Barbara Walters <bwalters@ncrl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Apply patch and update dabase
2 - Check that Search the Catalog links throughout the staff interface
have not changed
3 - Set "IntranetCatalogSearchPulldown" to 'Show'
4 - Verify that 'Search the catalog' links through staff client now have
a dropdwon to select search index
I think viewing one file each that includes updated header should be
sufficient, but please check as many as you can:
cgi-bin/koha/admin/aqbudgetperiods.pl
cgi-bin/koha/admin/admin-home.pl
cgi-bin/koha/cataloguing/addbooks.pl
cgi-bin/koha/circ/returns.pl
cgi-bin/koha/circ/circulation-home.pl
cgi-bin/koha/admin/cities.pl
cgi-bin/koha/admin/aqcontract.pl
cgi-bin/koha/admin/currency.pl
cgi-bin/koha/mainpage.pl
cgi-bin/koha/tools/letter.pl
cgi-bin/koha/members/members-home.pl
cgi-bin/koha/admin/categories.pl
cgi-bin/koha/admin/preferences.pl
cgi-bin/koha/admin/printers.pl
cgi-bin/koha/serials/serials-home.pl
cgi-bin/koha/acqui/newordersuggestion.pl
cgi-bin/koha/admin/z3950servers.pl
Sponsored by:
Northeast Kansas Library System (http://nekls.org/)
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Browse to subscription-detail.pl for a given serial
3) Note the new "OPAC view" link
4) Click the link, a new tab should open up showing the record
details for that record in the OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Find a record and open the items editor for it
3) Click the "Actions" button for an item
4) Choose the option "OPAC view"
5) A new browser tab should open to the OPAC details page for the record
whose items you are editing.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Perform a staff catalog search
3) Note the new "OPAC view" link
4) Click the link, it should open a new tab to the OPAC details for that
record.
This works fine except that it doesn't open in a new tab. I don't think
it's the fault of the patch, but of browser.js messing with links again
(See Bug 11937).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This bug is the beginning of a conversion from our current bespoke
syntax for slips and notices to Template Toolkit syntax.
This patch is the initial seed which will evolve over time.
With this addition, we can take advantage of our Koha Objects
to greatly simplify the processing of Slips and Notices over time.
Test Plan:
1) Apply this patch
2) Ensure you have the default CHECKOUT notice
3) Check out and return an item for a patron
4) Note the text of the CHECKOUT notice
5) Replace your CHECKOUT notice with the following:
The following items have been checked out:
----
[% biblio.title %]
----
Thank you for visiting [% branch.branchname %].
6) Repeat step 3
7) Note the CHECKOUT notice text matches the previous CHECKOUT notice text
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New notice syntax works, no koha-qa errors
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change method type() to _type() for Koha objects
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Bug 14757 [QA Followup] - Change all references to Koha::Borrower to Koha::Patron
Signed-off-by: Sean McGarvey <seanm@pascolibraries.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
As of comment #7
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch displays alternate streetnumber and street type on patron's
detail page.
To test:
- Apply patch
- Verify that the alternate address information displays follwing the
setting in syspref AddressFormat and contains street type and
street number (as appropriate)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Table 'borrowers' contain columns B_streetnumber and B_streettype.
This patch makes them editable for alternate address.
To test:
- Apply patch
- Edit a patron's details
- Verify that in edit mode for Alternate address, the fields 'street type' and 'street number' appear
and follow the settings in sysprefs AddressFormat, BorrowerMandatoryField, BorrowerUnwantedField
- Verify that the values are saved correctly.
Note: A second patch will follow to manage the display of street number and street type
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Tools -> Staged MARC Management and clean a file. If you have no files to clean, go to 'Stage MARC for import' and upload one to clean following the necessary steps.
2) Confirm that once the file has been cleaned, the Action column now shows a Delete button. Confirm this button only shows for cleaned files.
3) Click the Delete button.
4) Confirm that clicking Cancel exits the pop-up message and does not delete the file.
5) Confirm that clicking OK refreshes the list of staged records and the one you just deleted is no longer on it (has been deleted). You can confirm this by checking for the file in mysql (SELECT * FROM import_batches WHERE import_batch_id = X;)
6) Run prove -v t/db_dependent/ImportBatch.t (have written unit tests for CleanBatch and DeleteBatch)
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Catalyst sign off, so needs another one but YAY this is great.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Koha/Patron.pm (wantsCheckPrevCheckout, doCheckPrevCheckout): Rename
to...
(wants_check_for_previous_checkout, do_check_for_previous_checkout):
...this.
* C4/Circulation.pm: Use new names.
* t/db_dependent/Patron/CheckPrevCheckout.t: Renamed to...
* t/db_dependent/Patron/Borrower_PrevCheckout.t: ...this.
Bug 6906: Fix POD reference to old method name.
* Koha/Patron.pm (wants_check_for_previous_checkout): Fix POD.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Since bug 14878, tests must create the data they need to pass and not
assume they exist.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New feature: provide granular means to configure warnings about items
that have been issued to a particular borrower before, according to
their checkout history.
- Global syspref ('CheckPrevCheckout'), set to 'hardno' by default,
allows users to enable this feature library wide.
- Per patron category pref allows libraries to create overrides per
category, falling back on the global setting by default.
- Per patron pref allows switching the functionality on at the level
of patron. Fall-back to category settings by default.
* Koha/Patron (wantsCheckPrevCheckout, doCheckPrevCheckout): New
methods.
* C4/Circulation.pm (CanBookBeIssued): Introduce CheckPrevCheckout
check.
* admin/categories.pl: Pass along checkprevcheckout.
* koha-tmpl/intranet-tmpl/prog/en/modules/admin/categories.tt: Expose
CheckPrevCheckout per category setting.
* koha-tmpl/intranet-tmpl/prog/en/modules/preferences/patrons.pref:
Expose CheckPrevCheckout syspref.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/memberentrygen.tt:
Expose per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember.tt: Expose
per patron CheckPrevCheckout preference.
* koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt: Add
'CHECKPREVCHECKOUT' confirmation message.
* installer/data/mysql/kohastructure.sql: Modify structure of
'categories', 'borrowers', 'oldborrowers'.
* installer/data/mysql/sysprefs.sql: Add 'CheckPrevCheckout'.
* installer/data/mysql/atomicupdate/checkPrevCheckout.sql: New file.
* t/db_dependent/Patron/CheckPrevCheckout.t: New file with unit tests.
Test plan:
- Apply patch.
- Run updatedatabase.
- Regenerate Koha Schema files.
- Run the unit tests.
- Verify 'CheckPrevCheckout' is visible in Patrons sysprefs and can be
switched to 'hardyes', 'softyes', 'softno' and 'hardno'.
+ Check out previously checked out items to a patron, checking the
message appears as expected.
- Verify no 'Check previous checkouts' setting appears on the borrower
category pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on the borrower
category pages and can be modified per borrower category.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the default
setting if that is set to a 'soft' option).
- Verify no 'Check previous checkouts' setting appears on the individual
borrower pages if the syspref is set to a 'hard' option.
- Verify 'Check previous checkouts' setting appears on individual
borrower pages and can be modified.
+ Issue previously issued items to a borrower, checking the message
appears as expected (This setting should override the category
setting and the default setting if the latter is set to a 'soft'
option).
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
