Patch to follow that adds 3 new system preferences to control the
parameters for the longoverdue script.
New prefs are DefaultLongOverdueChargeValue, DefaultLongOverdueLostValue
and DefaultLongOverdueDays.
These preferences are used when you call the longoverdue.pl script without
their parameters.
Sponsored-By: CCSR
Signed-off-by: Leila and Fridos help <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (see Bug 6858 for using staticfine.pl) :
For a user (of a given category and library) with several overdues, launch the script :
staticfines.pl --category CAT,AMOUNT --library LIB --delay DELAY
Then, check that the user has been charged of AMOUNT if the due date of the most late item plus the delay is *before* today.
One day later, re-execute the script with the same parameters and check that the fine has not been charged twice.
Without patch, the fine is charged twice, with patch the user already charged is skipped (see output in debug mode)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch, the fine will be applied every time the script is run.
With the patch the fine will only be applied once.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Formatting :
perltidy
use q{} for SQL queries
add use Modern::Perl
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Remove unused $query var
Correct redefined $count var
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds to the database cleanup script an option to purge expired patron restrictions (debarments in code).
Test plan :
- Select a borrower
- Create a restriction with expiration date in the futur
- Create a restriction expired since 7 days
- Create a restriction expired since 14 days
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 14"
=> no restriction is removed for this borrower
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 13"
=> restriction expired since 14 days is removed
- run "misc/cronjobs/cleanup_database.pl -v --restrictions 6"
=> restriction expired since 7 days is removed
- run without argument "misc/cronjobs/cleanup_database.pl"
=> You see help text for restrictions option
- run without days "misc/cronjobs/cleanup_database.pl -v --restrictions"
=> You get a purge on 30 days
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When running update_totalissues.pl cronjob, it will stop on a corrupted
record.
This patch changes UpdateTotalIssues so that it return 1 if processing
record has succeded. Also, if mapping with biblioitems.totalissues does
not exist, the method has nothing to do so it stops and returns 1.
When processing a corrupted record, script now alerts about the error on
this biblionumber (if script is verbose) and process next record.
A total number of records with error will be printed at the end of the
script.
Test plan :
- Create a dabase with a few biblios and some issues
- Modify first biblio record (use direct sql update) : set empty value
in biblioitems.marcxml
- Launch script : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
=> Without patch : the script stops at first record
=> With patch : the script prints error for first record and processes
all records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to confirm the problem before the patch and successfully
follow the test plan.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: mail from this doesnt work in current master, so you may not
be able to test this fully
To Test
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test sending a mail from scheduled reports, note you will need to have the fix
for 12031 applied
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the 2 prefs are not defined, the script should die.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects a syntax error, adds some comments to the usage
instructions and adds a count of the removed borrowers (with verbose
flag on).
Note that this is a dangerous script. It will delete your patrons
in patron category PatronSelfRegistrationDefaultCategory.
If you do not use this as a temporary category, you should NOT run this
script.
Test plan:
Check PatronSelfRegistrationDefaultCategory.
Check PatronSelfRegistrationExpireTemporaryAccountsDelay.
Based on these two settings, check the number of patrons to be deleted (date
enrolled should be before NOW minus the delay).
Backup your data and run the script.
Check the number of deleted borrowers.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This follow-up makes some language and spelling corrections to the
system preference descriptions. I have updated the preferences heading
to read "Share anonymous usage statistics" in order to emphasize the
anonymous aspect.
I have also updated the main preference name from "UsageStatsShare" to
"UsageStats" so that it is alphabetized first in the list of
"UsageStats*" preferences. I think this will make it clearer to the Koha
administrator what feature they are configuring.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch contains small improvements made in the overdue_notices.pl script.
- UTF-8 support in the HTML output
- Add the phone, cardnumber, branchname and letternumber columns
to the csv output
Testing:
I) Create an issue overdue (intranet):
0) Enter in a patron account, add some characters like
ユーザー別サイト in his address
1) Check if in Patron category administration the overdue column
is YES for his code
2) In Tools -> Notice triggers define first delay = 7, letter
Overdue notice. Nothing for second ni third
3) Check if Tools -> Notices and slips, code overdue is available
4) checkout a book with a retard more than 7 days.
5) Check if Adminstration -> Defining circulation and fine rules
for all libraries has fine rules for his patron category,
item type book.
II) Before applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are not correct
III) After applying the patch
0) Run misc/cronjobs/overdue_notices.pl -n -html .
1) Open the file notices_"date".html in a brower
2) Validate the characters are correct
3) Run misc/cronjobs/overdue_notices.pl -n -csv temp.csv
4) Validate phone, cardnumber, branchname and letternumber
columns and values
Sponsored-by: CCSR
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added the Sponsored-by line.
Overdue notices, script uses method days_between which returns always
positive value of days, no mater if due_date is higher or lower from
date_to_run. This causes overdue notices to be send for real overdue and
for checkouts with due date in future, which have same days_between as
in notice triggers.
To reproduce:
1. Set up overdue notice triggers for eg. 2 day.
2. Checkout items for 2 borrowers first gets item with due date 2 days
in past and second gets 2 days in future.
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. watch that notices was generated for both of them.
To test:
1. Repeat steps 1,2
2. Apply patch
3. run ./misc/cronjobs/overdue_notices.pl -n -t
4. should be 1 notice for borrower with overdue item.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, just adds an additional test.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new cron script automatic_renewals.pl and a new
entry in crontab.example.
To test:
1) You need a few issues, some with automatic renewal and some without.
2) Confirm that each time you run misc/cronjobs/automatic_renewals.pl
those issues are renewed that meet all of the following criteria:
- automatic renewal has been scheduled either by issuing rule or by
checkbox on the checkout page
- the number of allowed renewals isn't exceeded
- renewal isn't premature (No renewal before)
3) Confirm that all other issues are not affected.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10832 changes the fallback behavior if a patron does not have email
address: a print notice is generated into the message_queue table.
But this can cause issue for some libraries. The script should sent an
email and (generated csv, html, text file) with the list of all unsent
notices.
Test plan:
1/ Add overdue to a patron without email address (or smsalertnumber)
2/ Check email in the overdue rules configuration (or sms)
3/ Launch the overdue_notices.pl cronjob
4/ Verify the message_queue contain a print notice AND an email notice
for the library
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This works as described and restores the old behaviour for now, with
the difference that you have a print notice generated and visible
in the patron account notices tab that will say 'pending'.
We will have to figure out how we can change the workflows nicely
to have only one script deal with print notice in the future.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using script with sample conf files
RSS feeds generated are 'well formed' xml
Some koha-qa errors fixed in followup
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Cancel replacing carriage return with <br /> in printed html file as <br /> is needed in model for email notices when html format is checked
Test plan :
* define an OVERDUE notice with html activated, with <br /> at each end of line
* make sur you've got some borrowers with overdues meeting your notices triggering rules (some with valid email and others without)
* run overdue_notices.pl -html to generate html files for borrowers without email
Without patch
* email notifications are correctly formated as html content, with one <br /> at each end of line
* in html file, <br /> is duplicated at each end of line
With patch
* nothing changes for email notification
* html file is correctly formatted with only one <br /> at each end of line
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Copied test plan from comment.
No errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So the first patron receives correct letters, but the followings received
all the previous ones AND his letters.
Eventually you end up with !n letters in message_queue where n = amount of patrons
receiving due messages as digest and having something due.
Eventually we got 4 000 000 ODUEDGST-letters of which 1 100 000 were sent to our patrons :)
This is madness!
Test plan:
0/ Delete the content of the message_queue table.
1/ Pick 3 patrons and set them to receive due messages as digest.
2/ Check 1 item out for 3 separate patrons and specify a due date today.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 6 notices (1+2+3 [!n]). Now, you get 3 notices, 1 for each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exis.
Patch work as described following test plan.
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10833 introduced a variable loop but does not reset it every
iteration.
So the first patron receives correct letters, but the following ones
received all the previous ones as well as their own notices
Test plan:
0/ Delete the content of the message_queue table.
1/ Define advanced notices sent 2 days in advance for 2 patrons.
2/ Check 1 item out for each one and specify a due date today + 2 days.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 3 notices. Now, you get 2 notices, 1 for
each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work well, no errors.
Tested following test plan, printing on screen or saving into db,
3 messages before, 2 after (advance_notices.pl -v -n -m 2 -c)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Also removes a commented line that changed the value of $confirm.
If it would default to 1, we do not need it at all.
I am not saying that we need it, but just documenting that we have it.
Signed-off-by: Marc Véron <veron@veron.ch>
Small change in documentation.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The *_PHONE notices (HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE) should
be "merged" into the main code (i.e. HOLD, PREDUE and OVERDUE).
Test plan:
1/ Make sure you have HOLD_PHONE, PREDUE_PHONE and OVERDUE_PHONE notices
2/ Execute the update DB entry
3/ Verify the 3 notices have been merged into "phone" template of the
HOLD, PREDUE and OVERDUE notices
4/ Verify there is no regression in the Talking Tech feature (how?)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Verified that notices are merged
TalkingTech_itiva_outbound.pl runs without problem... but can't produce
any output, may be not correctly configured (my setup), no warnings
nor log messages
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- Choose 2 patrons P1 and P2
- Edit "Patron messaging preferences" and
check SMS + email with 2 days in advance for P1
check email with 5 days in advance for P2
- defined a message for the letter code PREDUE for sms and email
(tools/letters.pl).
- select 2 barcodes (B1, B2).
* checkout B1 to P1 with a due date = NOW - 2 days
* checkout B2 to P2 with a due date = NOW - 5 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/advance_notices.pl -c
- retry the previous sql query, you should have X + 3 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code PREDUE
1 message for P2, email and the letter code PREDUE
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If overdues should be sent to some patron (on the same branch), only the
first one was notified.
This patch fixes this issue.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
- define some complex overdue rules (tools/overduerules.pl).
For example:
First overdue from 2 to 5 days by sms and email with letter code L1
Second overdue from 5 to 15 days by email with letter code L2
Third overdue from 15 days by print with letter code L3
- define a message for each transport type selected (tools/letters.pl).
- select 3 patrons (P1, P2, P3) and 3 barcodes (B1, B2, B3).
* checkout B1 to P1 with a due date = NOW + 3 days
* checkout B2 to P2 with a due date = NOW + 10 days
* checkout B3 to P3 with a due date = NOW + 20 days
- into the mysql cli, note the value of unsent message:
select count(*) from message_queue where status != "send";
- launch the cronjob:
perl misc/cronjobs/overdue_notices.pl
- retry the previous sql query, you should have X + 4 unsent messages
(depending of current checkouts in your DB!).
- view all unsent message:
select borrowernumber, letter_code, message_transport_type, content
from message_queue where status != "send";
You should see:
2 messages for P1, 1 for sms, 1 for email and the letter code L1
1 message for P2, 1 for email and the letter code L2
1 message for P3, 1 for print and the letter code L3
- Specific case: If a user don't have a smsalertnumber and a sms is
required or if a user don't have an email defined and an email is
required, a print notice is generated.
A print notice is generated only 1 time per borrower and per level.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The message_transport_type param should passed to GetPreparedLetter, not
part of the "tables" parameter.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The HOLD_PRINT and HOLD_PHONE notices become useless.
This patch modifies existing notices in order to group them into the
main notice type 'HOLD', with any pre-existing print and phone
templates in the appropriate places.
Test plan:
- Apply the patch and execute the update database entry.
- Verify that your previous HOLD_PHONE and HOLD_PRINT are displayed
when editing the HOLD notice (under phone and print).
- Choose a patron and check SMS, email, phone for "Hold filled"
(on the patron messaging preferences).
- Place a hold.
- Check the item in and confirm the hold.
- If the patron has an email *and* a SMS number, 2 new messages are put
into the message_queue table: 1 sms and 1 email.
If the patron does not have 1 of them, there are 2 new messages: 1
sms/email and 1 print.
If the user has neither of them, there is 1 new message: 1 print.
- The generated messages should correspond with the notices defined,
depending the message transport type.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Just noting that if email and SMS are disabled in the msg prefs, the user
will not have a print message.
And if the SMS driver fails, the record status in message_queue is 'failed',
but staff may not be aware of that.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The sharedate column is documented as having the following meaning:
"date of invitation or acceptance of invitation"
This patch adjust the new list-sharing code to stick with that
interpretation, as otherwise the column should have been renamed
to 'invite_expiration_date' or the like.
It also removes the "housekeeping" functionality from AddShare, as
otherwise the routine should have been named AddShareAndDoOtherStuff.
To prevent list shares from piling up, a new --list-invites flag
has been added to cleanup_database.pl. The default crontabs have
been modified to use the --list-invites flag by default.
To test
-------
[1] Make some list share invites and accept some, but now all of them.
[2] Wait 14 days (or more reasonably, manually edit the sharedate
values for the unaccepted shares to put them at least 14 days in the
past.).
[3] Run cleanup_database.pl --list-invites
[4] Verify that accepted shares remain, as to share invites that have
not yet reached more than 14 days of age.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a notice is defined for the library of the patron, it should be
used.
Without this patch, the notice used is the one defined for all
libraries.
Test plan:
1/ Set the advanced notice for a patron using digest.
2/ Check one item out to this patron (backdate the return date according
the days in advance value).
3/ launch advance_notices.pl -c
4/ Verify the notice used is the default one.
5/ Define a notice for the library of the patron for PREDUEDGST
6/ launch advance_notices.pl -c
7/ Verify the notice used is the one previously defined.
8/ Check one item out to this patron (date due = today)
9/ launch advance_notices.pl -c
10/ Verify the notice used is the default one.
11/ Define a notice for the library of the patron for DUEDGST
12/ launch advance_notices.pl -c
13/ Verify the notice used is the one previously defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test case: User from Library A, checked out books
- in library A from A and B
- in library B from B
Verified, that the 'all libraries' notice is still used,
when no specific notice is defined.
Verified, that the patron's home library noticed is used,
when defined.
Note: Before and after the patch we print the branch information
from the patron's home library, so also using the template from
this branch, seems logical. All items over all branches are
processed into one single reminder email, before and after the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It would be good to be able to specifically target import records from
Z39.50 for cleanup.
Test Plan:
1) Apply this patch
2) Import one or more batch record sets into Koha
3) Perform some Z39.50 searches
4) Run this command: misc/cronjobs/cleanup_database.pl -v --z3950
5) Verify that only Z39.50 records were deleted
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
We have a number of reports of libraries that were upset by Bug 10720
being fixed! These libraries preferred this single file output, but as
text only. We should bring back this behavior, but as a feature, not a
bug.
Test Plan:
1) Apply this patch
2) Run overdue_notices.pl --html
3) Note the output is wrapped in html tags
4) Run overdue_notices.pl --text
5) Note the same output, but not wrapped in html tags
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
To test, add the -n parameter.
The filename generation could be refactored but not blocker.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds three optional parameters to runreport.pl
to allow authentication with the SMTP server.
--username -> Username to pass to the SMTP server for
authentication
--password -> Password to pass to the SMTP server for
authentication
--method -> Method is the type of authentication.
Ie. LOGIN, DIGEST-MD5, etc.
Test Plan
---------
As for testing manually using a Gmail account:
1. Set up your sendmail as shown in
misc/cronjobs/CONFIGURE.gmail
2. Before applying this patch, run misc/cronjobs/runreports.pl
on your favorite report including the proper email parameters
against your gmail account.
3. Note the failure message stating the authentication
requirement.
4. Apply this patch, and return the script including the
additional parameters and specifying "LOGIN" for the method.
5. Note the successful send.
6. perldoc misc/cronjobs/runreport.pl
7. Run the koha qa test tool.
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7688 changed the prototype for GetNextDate, but the serialsUpdate.pl
cronjob script had not been updated. This patch fixes the problem.
Test plan:
Before applying the patch:
1/ Check that the following SQL query returns something:
SELECT serial.*
FROM serial
LEFT JOIN subscription ON (subscription.subscriptionid = serial.subscriptionid)
WHERE serial.status = 1
AND DATE_ADD(planneddate, INTERVAL CAST(graceperiod AS SIGNED) DAY) < NOW()
AND subscription.closed = 0;
2/ Run misc/cronjobs/serialsUpdate.pl -v
It should die with an error message like this:
Can't use string ("2011-03-05") as a HASH ref while "strict refs" in use
3/ Apply the patch
4/ Run misc/cronjobs/serialsUpdate.pl -v
It should exit normally and print messages like this:
Serial issue with id=XX updated
5/ Run the Koha QA test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
installer/data/mysql/sysprefs.sql has semicolon as default.
This fixes both instances to use the same fallback value.
It also prevents CSV header info from being included in non-CSV messages.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This determines if the CSV header should be included or not and
then generates it as needed using the delimiter specified in the
delimiter system preference.
TEST PLAN
---------
1. make some overdues books
2. run the overdue notices script without the -csv
3. check emails notice csv header is in the email
4. apply the patch
5. run the overdue notice again
6. check email notice CSV header is absent
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the CSS used to attempt to Zebra-stripe the
output of emailed reports. This will work with some email clients,
but other email clients (e.g., Gmail) don't handle style elements in the
body or head element.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
