There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A failed login should not leave the user in a half logged authenticated
state, but rather return them to an anonymouse session as per the
pre-login attempt state.
To replicate error:
1. Try to log in with some nonexisting user id or wrong password in the
OPAC
2. Go directly to /opac-user.pl (e.g., enter it in the browser address
bar, or just click on the "Log in" link)
3. Observe a DBI error displayed on the screen
4. You are now in the "deadloop" of sorts (opac/opac-user.pl refuses to
display the login screen, no matter how many times you try to reload
it); to break the deadloop, one needs to:
- remove session cookie from the browser (or cause the session to
expire in some other way - closing browser window would be probably
enough for that)
- remove offending session on the server (from mysql sessions table,
..)
- log in with proper credentials using some other page (like
opac/opac-main.pl right-side panel), which does not involve
opac/opac-user.pl being called without "userid" CGI parameter.
To test:
1. Test as above, the DBI error should no longer be present
2. Check that search history works across failed and sucessful login
attempts
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add a missing semicolon to the end of a template variable assignment
line. This patch should not affect operation.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The password should be encoded before hashing.
Test plan:
- Before applying the patch, create a user with utf-8 in password
- apply patches
- try to log in
- change the password
- log out
- try to log in
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds links to "My account" and "My checkouts" to drop down in staff client header.
To test:
Apply patch
Got to drop down of logged in user (top right)
See new links to "My account" and "My checkout" (above "Log out")
Test the links.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Works as advertised. The options are not displayed when you are logged
in as the db/admin user.
Added classes "toplinks-myaccount" and "toplink-mycheckouts" to li tags to make it possible to hide them (per Kyle M $
Switching back to "Signd-off" (Hope this is OK becuause it is a tiny string addition)
Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While testing a bug, warnings in the opac error log were
building up due to a particular line in C4::Auth. After
reviewing the code, it was discovered that removal of the
OpacMainUserBlockMobile system preference created this.
Since the system preference no longer exists, and is not
used, the line was deleted from C4/Auth.pm to prevent this
warning from occuring.
TEST PLAN
----------
1) Go to any OPAC page.
2) Check your opac error log.
-- there should be something about uninitialized values
used in C4/Auth.pm around line 443.
3) Apply the patch
4) Refresh the page.
-- that same error should not be triggered.
5) prove -v t/db_dependent/Auth.t
-- this runs the get_template_and_user function
which had the parameter removed.
6) run the koha qa test tools
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacShowLibrariesPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- The shibboleth patch introduced an undefined message into the error
logs, when shiboleth is disabled.
Testplan
1. Ensure shibboleth is disabled.
2. Refresh any opac page
3. See 'Use of uninitialized value $ENV{"REMOTE_USER"} in string ne at
/home/koha/kohaclone/C4/Auth.pm line 711.' popup in the opac-error.log
4. Apply patch
5. Refresh opac page
6. Error should no longer appear
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Convert Auth_with_shibboleth to use dbic stanzas.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- A number of issues were highlighted whilst writing sensible unit tests
for this module.
- Removed unnessesary call to context->new();
- Global variables are BAD!
- Croaking is a wimps way out, we should handle errors early and
properly.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Local fallback was not very well implemented, this patch adds
better handling for such cases allowing clearer failure messages
- This patch also adds the ability to use single sign on via the
top bar menu in the bootstrap theme.
BUG8446, Follow up: Adds perldoc documentation
- Add some documentation to the Auth_with_Shibboleth module
including some guidance as to configuration.
BUG8446, Follow up: Correct filenames to match guidlines
- Moved Auth_with_Shibboleth.pm to Auth_with_shibboleth.pm to match
other files present on the system.
BUG8446, Follow up: Correct paths after file rename
BUG8446, Follow up: Implemented single sign out
- This follow up rebases the code against 3.16+ which managed to break
some of the original logic.
- As a side effect of the rebasing, we've also implemented the single
sign out element. Upon logout, koha will request that the shibboleth
session is destroyed, and then clear the local koha session upon
return to koha. Due to the nature of shibboleth however, you will
only truly be signed out of the IdP if they properly support Single
Sign Out (which many do not). As a consequence, although you may
appear to be logged out in koha, you might find that upon clicking
'login' the IdP does NOT request your login details again, but instead
logs you silently back into your koha session. This is NOT a koha bug,
but a shibboleth implementation issue that is well known.
BUG8446, Follow up: Fixed bootstrap login via modal
- The bootstrap theme enable login from any opac page via modal. To
enable this with shibboleth we had to make some template parameters
globally accessible when shibboleth is enabled.
BUG8446, Follow up: Add template rules for Shibboleth and CAS
- Add template rules so that CAS and Shibboleth can coexist.
BUG8446, Follow up: Added default config to config file
BUG8446, Follow up: Embellished perldoc documentation
- Updated perldoc to correct detail about configuring shibboleth
authentication.
- Updated perldoc to include subroutines and their respective functions.
BUG8446, Follow up: Enable configuration of match field
- Added clearer, more flexible, configuration of shibboleth attribute to
koha borrower field matching for authentication
- Correcting of documentation to make it more clear to the current
implementation
- Minor refactoring of code to reduce some code duplication
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes how the OPACBaseURL parameter gets set in the subroutine
get_template_and_user in Auth.pm.
Currently, it's being set by the $ENV{'SERVER_NAME'} variable. In many
cases, this will probably match the URL that the user uses to access a
page. However, this causes problems with reverse proxies.
There are ways to compensate for proxy servers (such as inspecting
other variables set by the web server), but such a solution seems
a bit convoluted...especially since we already use the system preference
OPACBaseURL in many other parts of Koha.
We probably shouldn't be passing OPACBaseURL from Auth.pm at all, and
instead use the Koha TT plugin and using_https param to determine
protocol. However, that's outside the scope of this bug/patch.
This patch is just meant to fix an existing bug.
I did leave the $ENV{'SERVER_NAME'} as a full back if OPACBaseURL isn't
set, but that's it.
_TEST PLAN_
Before applying:
1) Clear your OPACBaseURL preference
2) Perform a search in the OPAC
3) Click on or hover over the orange RSS icon
4) Note that the URL used for the RSS links is either:
a) The same URL you used to access Koha (no reverse proxy)
b) The ServerName from your Koha apache conf which isn't the
same URL you used to access Koha (reverse proxy)
5) Add an OPACBaseURL that isn't the same as the actual OPAC URL
6) Note that the OPACBaseURL system preference has no effect here
After applying the patch:
7) Refresh the page
8) Note that the URL you see now is actually the OPACBaseURL system
preference that you set
9) Clear your OPACBaseURL system preference
10) Refresh your search page
11) Note that the URL has reverted back to the URL that you saw before
(either the original Koha site URL or the Koha ServerName defined
in Apache and not the URL of the proxy)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If flagsrequired is set, authnotrequired should be 0.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements 2 suggestions on comment #3
- Prevents creation of a new user with same userid
of database user
- When checking password, if userid matches database user,
only check against pass on config file
To test:
1. Create a new user with same login as database user
any password different from real db user
2. Check that you can login on staff using this user/pass
and you are superlibrarian
3. Apply the patch
4. Login again using new pass, it must fail
5. Login again using db pass, you are now superuser,
but system does not warn you :( No problem, that's
for having one borrower with that login
6. Delete user with same login as db user
7. Try to create one again as in 1, system must return
an error of duplicate login!
8. Check for no regressions on user/pass authentication
Resubmited, has an error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This works nicely and as described.
Also editing the former 'superuser' will force you to
change the userid in order to save any other change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the addition of search groups to Koha, the branch limiting
parameter in multiple PAC by URL support should also support
limiting by these search groups. This patch adds this ability.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10029 tries to fix the use of URL parameters in CAS authentication.
But is does not work.
The full URL must be used in all methods of C4::Auth_with_cas.
Also, in checkpw_cas(), the 'ticket' parameter must be removed to find
the original URL.
This patch removes the 'ticket' parameter from query before calling
checkpw_cas() since the ticket is passed as method arguemnt.
In C4::Auth_with_cas, many methods use the same code to get the CAS
handler and the service URI. This patch adds a private method
_get_cas_and_service() to do the job.
Test plan:
- Enable CAS
- Go to opac without been logged-in
- Try to place hold on a record
=> You get to /cgi-bin/koha/opac-reserve.pl?biblionumber=XXX showing
authentication page
=> Check that CAS link contains query param "biblionumber"
- Click on CAS link and log in
=> Check you return well logged-in to reserve page with biblionumber
param
- Check CAS loggout
- Check Proxy CAS auth
Signed-off-by: Koha team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests in t, xt, and t/db_dependent/Auth.t.
Also passes QA script.
As I have no working CAS server, I focused on regression testing:
Activated Persona and casAuthentication.
- Verified normal login against database still works.
- Verified Persona login works.
Note: With Persona you are always forwarded to the patron
account - so you have to search for the record again before
you can place a hold.
- Verified that the CAS URL contains the biblionumber when
logging in while placing a hold.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Retested 2014-04-12
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also store interface (intranet, opac) in context to not have to pass it
as parameter.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When using Plack, the https method returns 'OFF'.
We have to test this value before sending the value to templates.
Test plan:
1/ Fill your OPACBaseUrl
2/ Configure apache for using http
3/ Check the social networks links (should be http://OPACBaseUrl)
4/ Launch Plack
5/ Check the social networks link (should be http://OPACBaseUrl)
6/ Stop Plack
7/ Configure apache for using https
sudo openssl req -x509 -nodes -days 365 -newkey rsa:1024 -out
/etc/apache2/server.crt -keyout /etc/apache2/server.key
and add in you virtualhost (with :443)
SSLEngine on
SSLCertificateFile /etc/apache2/server.crt
SSLCertificateKeyFile /etc/apache2/server.key
a2enmod ssl
service apache2 restart
8/ Check the social networks links (should be https://OPACBaseUrl)
FIXME: Under Plack, with ssl actived, the CGI->https() method always
returns 'OFF'.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This ensures that if an anonymous session is converted to a logged-in
session, that search history times from the anonymous session get
stored corectly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like biblio, this feature provides an authority search history.
This history is available for connected and disconnected user.
If the user is not logged in Koha, the history is stored in an
anonymous user sessin.
The search history feature is now factorized in a new module.
This patch adds:
- 1 new db field search_history.type. It permits to distinguish the
search type (biblio or authority).
- 1 new module C4::Search::History. It deals with 2 different storages:
DB or cookie
- 2 new UT files: t/Search/History.t and t/db_dependent/Search/History.t
- 1 new behavior: the 'Search history' link (on the top-right corner of
the screen) is always displayed.
Test plan:
1/ Switch on the 'EnableOpacSearchHistory' syspref.
2/ Go on the opac and log out.
3/ Launch some biblio and authority searches.
4/ Go on your search history page.
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Delete all your history (cross on the top-right corner)
11/ Check that all your history search is empty.
12/ Launch some biblio and authority searches.
13/ Login to your account.
14/ Check that all previous searches are displayed.
15/ Launch some biblio and authority searches.
16/ Check that these previous searches are displayed under "Current
session".
17/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All patches together pass QA script and tests.
Also, new tests in t/db_dependent/ pass.
Tested in all 4 OPAC themes, being logged in and anonymous.
Anonymous search history will be appended to personal search
history after logging in.
Also verified that cleanup_database still purges search history,
now also including the authority searchs.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch uses the TT helper function Koha.Preference() to
retrieve the value of NoLoginInstructions rather than passing
it to all templates as a template variable.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On a failed login, the default message is harcorded into opac-auth.tt.
It would be preferable to allow for a preference to override that message (for example: ...Please bring an ID to t
The changes modify
-opac-auth.tt to allow for custom value
-admin/preferences/opac.pref to add it to the preferences with a description
-C4/Auth.pm for the loading of the preference
-sysprefs.sql
-updatedatabase.pl
TESTING
1) in OPAC, logged out, try login in by entering no or wrong credentials. Acknowledge the "Don't have a p
2) Apply the patch
3) Regression Test: Redo step 1. Same (default) message should appear.
4) Log in to intranet,
- select NoLoginInstructions in system preferences.
- Enter new (xml) message. Possible:
<h5>Welcome to Koha, please bring your passport to the front office</h5>
- and save
5) refresh the OPAC, try login again with invalid credentials. The new message should appear.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch makes sure that the search history from an
anonymous session is cleared from the session after a user
logs in (and the session history is saved to that user's
record in the database). This fixes a problem where the
search history from the session got repeatedly added to the
database each time the user did something while logged
into the OPAC.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is recommended in CGI::Session documentation.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Remove unit tests for ParseSearchHistoryCookie, which doesn't exist
anymore
- Add unit tests for ParseSearchHistorySession and
SetSearchHistorySession
- Remove/Modify comments about search history cookie
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Tests fixed and moved, and comments tidied up
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Storing search history into cookie can cause problems, due to the size
limitation of 4KB.
The solution here is to store search history into the CGI::Session
object, so there is no size limitation (but anonymous search history
still remember up to 15 requests max.)
Test plan:
- Go to OPAC in anonymous mode.
- Check that the "Search history" link is *not* shown in the top right
corner of the page
- Make some searches on /cgi-bin/koha/opac-search.pl
- The "Search history" link should appear. Click.
- Your search history should be displayed.
- Try to log in with invalid username/password
- Go back to search history, it's still there
- Now log in with valid username/password
- Your anonymous search history should be saved into your own search
history.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Restoring original sign offs and comments below
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Well, search history saving is similar before and after patch.
i.e. anonmymous search is saved when user logs in, but cookie
KohaOpacRecentSearches is empty.
Shows current an previous session searches
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
All tests and QA script pass, works as described.
Signed-off-by: Charlene Criton <charlene.criton@univ-lyon2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This gets rid of some more warnings.
It also corrects a noisy ne condition.
$userid = $retuserid if ( $retuserid ne '');
became
$userid = $retuserid if ( $retuserid );
It also integrates Srdjan Jankovic's patch with Petter Goksoyrsen's
patch, while correcting the problems found.
This includes:
my $q_userid = $query->param('userid') // '';
along with:
my $s_userid = '';
and:
my $s_userid = $session->param('id') // '';
Indentation does not reflect actual scoping.
A missing system preference would have triggered a ubiquitous
undef compare check failure message. This makes the flooding
message more useful, so as to help correct it.
The change to accomplish this was:
my $pki_field = C4::Context->preference('AllowPKIAuth');
if (!defined($pki_field)) {
print STDERR "Error: Missing AllowPKIAuth System Preference!\n";
$pki_field = 'None';
}
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
During login at the Staff interface you get warnings in the logs
regarding an uninitialized value for the $pki_field variable.
To test:
- tail -f /path/to/your-intranet-logs
- Point your browser to your staff login page
- Login
- Three warnings are showed
- Apply the patch
- Log out
- Log in
- No new warnings, and you can still log in.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Followed test plan; it works as advertised.
Also works when I deleted AllowPKIAuth system pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A "busc" param is cleared if the template name is not opac-.*detail.tt.
So if a user adds a biblio to a list, he cannot continue to browse
results.
Test plan:
- launch a search at the OPAC (opac-search.pl).
- click on a result and browse results (using previous/next links).
- a title attract your attention and you add it to a list
("Save to yours lists" link on the right).
- save the list.
- browse again results.
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, also checked some other pages and actions
accessible from the detail page.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
