Addresses Katrin's comments in comment# 56
TEST PLAN
---------
1) Back up your DB
2) Ensure you have multiple languages, including
some that have sub-languages (e.g. de-DE, de-CH)
-- cd misc/translator
-- perl translate install {language code}
3) Ensure that you have all the languages enabled
-- Staff client -> Home -> Global system preferences
--> I18N/L10N
Check all the languages in opaclanguages.
Ensure that opaclanguagesdisplay is 'Allow'
4) Open OPAC
-- should only have languages in footer.
Annoyingly below the fold.
5) Drop your koha database, and create a blank one.
6) Apply all patches
7) Reinstall all the known languages, so the templates
are appropriately updated.
8) Go to staff client and do an install of koha, with
all the dummy data.
9) Ensure you have all the languages enabled (see (3))
10) Refresh your OPAC page
-- language selector position should be in both
the footer and at the top as expected.
-- this confirms the sysprefs.sql change.
11) Restore your DB
12) run the updatedatabase.pl script
13) Ensure you have all the languages enabled (see (3))
14) Refresh the OPAC page
-- should still only have languages in the footer.
-- this confirms that upgrade won't change anything.
-- this confirms the atomic update.
15) git diff origin/master
-- the opac-bottom.inc difference should only
have changes around a SET, IF, and END.
This confirms the noprint was fixed.
16) In the staff client, change the OPAC system preference,
OpacLangSelectorMode, to all three values.
For each value, refresh the OPAC page, and confirm the
position of the language selector.
-- should work as expected.
17) run koha qa test tools
NOTE: Tested as a single batch together.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
0) Back up your DB
1) open OPAC
-- should only have languages in footer.
Annoyingly below the fold.
2) Drop your koha database, and create a blank one.
3) Apply all patches
4) Go to staff client and do an install of koha, with
all the dummy data.
5) Once installed, refresh your OPAC page
-- language selector position should be in footer
still as expected.
-- this confirms the sysprefs.sql change.
6) Restore your DB
7) run the updatedatabase.pl script
8) Refresh the OPAC page
-- should still only have languages in the footer.
-- this confirms that upgrade won't change anything.
-- this confirms the atomic update.
9) git diff origin/master
-- the opac-bottom.inc difference should only
have changes around a SET, IF, and END.
This confirms the noprint was fixed.
10) In the staff client, change the OPAC system preference,
OpacLangSelectorMode, to all three values.
For each value, refresh the OPAC page, and confirm the
position of the language selector.
-- should work as expected.
11) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
tidy the indentation for that lang selector loop code.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on Mark's inputs in comment #40 -
[1] selected 'mast' (short of 'masthead') and updated :
(a) bug_14252-OpacLangSelectorMode_syspref.sql
(b) sysprefs.sql
(c) opac.pref
[2] Reduced the calls to Koha.Preference() from :
(a) masthead.inc
(b) opac-bottom.inc
After applying this patch, update the database once for it to pick
up the new option values -'both|mast|foot'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Based on discussion, this followup does the following:
1/ brings back the switcher on opac-bottom.inc
2/ adds a syspref OpacLangSelectorMode to toggle between the three
modes:
(a) show switcher both on masthead and footer (default)
(b) footer only
(b) masthead only
Test plan
=========
1/ apply earlier patches attached to this bug in their correct order
2/ apply this followup patch
3/ run updatedatabase.pl to add in the atomic update
4/ goto admin/preferences.pl?tab=opac
5/ look up OpacLangSelectorMode, it should be set with default value
"both masthead and footer"
6/ check OPAC to see if both locations show the selectors
7/ change OpacLangSelectorMode to 'only header' and 'only footer' at
each iteration, and check if the selection has correctly toggled
the selectors. It should
Note: make sure you do not have the patch 11057 applied on the branch
from before, otherwise merge conflict might happen.
http://bugs.koha-community.org/show_bug.cgi?id=14252
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This quick fix disables sublanguages dropdown,
show all sublanguages on same level.
To test:
1) Apply both patches
2) Translate to have sublanguages (en-NZ, de-DE, de-CH)
3) Go to opac, confirm you can select any lang/sublang
4) Check on movil device
4th version.
Removed rfc4646 subtag on sublanguages, think it's cleaner.
Currently on master all translated languages/regions have
valid description ('en' at least)
Added language sort using rfc4646 subtag
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Followup fixes the issue with lang group dropdowns. Works well
across standard desktop as well as mobile device with small screens
(checked on 4.3" / 4.7" / 5")
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The OPAC language switcher takes up a lot of space at the bottom of the
browser. It also has issues of being not always visible.
This patch adds the switcher to the masthead navbar and removes from the
opac-bottom.inc navbar.
Test plan
=========
1/ Apply patch
2/ Set opaclanguagesdisplay syspref to 'show'.
3/ Add a few languages i.e. es-ES, fr-FR and de-DE
$ cd misc/translator
$ perl translate <langcode>
4/ Enable installed languages for OPAC use by checking on 'opaclanguages'
under I18N/L10N sysprefs
5/ Go to the OPAC, you should have a "Languages" dropdown on the masthead
navbar, the opac-bottom.inc navbar should no longer be there.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Followup fix language chooser for sublanguages
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Mulitple 082 fields are already separated by |, but multiple
$a in one 082 field were only separated by space, making those
not easy to read.
Patch takes care that the | separator is used in all cases.
To test:
- Catalog a record with multiple 082 fields
- Add one or multiple $a subfields to each
- Verify every single classification is separated from
the others with a | in staff and in OPAC detail pages
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When printing a record from the OPAC or the staff interface, some
uneeded blocks are displayed.
OPAC:
1/ Browse results
2/ The view tags (Normal, MARC, ISBD)
Intranet:
1/ Marc view link
2/ The Please upload one image link
Test plan:
On a record detail page (staff and OPAC), print the page and confirm
these blocks no longer appear.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To test:
1/ Hit a url like
/cgi-bin/koha/opac-shelves.pl?viewshelf=7&op=modif&display="><script>alert('oh
noes')</script> Where the id is a valid shelf id
2/ Notice the js is executed
3/ Apply patch
4/ Reload page
5/ Notice input is now escaped on display
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Tested in Debian, couldn't reproduce the alert in Iceweasel, but in
Chromium. Patch fixes it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Fix for /cgi-bin/koha/opac-search.pl
To test
1/ Hit /cgi-bin/koha/opac-search.pl?tag="><script
src='http://cst.sba-research.org/x.js'/>&q=a
2/ Notice the js is executed
3/ Apply patch
4/ Reload page, notice it is no longer executed
5/ Test the rss links work still
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Confirmed bug and that the patch fixes it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
opac-addbybiblionumber.pl is also vulnerable because it doesn't escape
list names.
To test
1/ Create a malicious list name
2/ Try to add a biblio to the lists
3/ Notice js is excuted
4/ Apply patch
5/ Test again
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This pref does not work at all, the interface let the user choose to
list all suggestions, but whatever he chooses the suggestion list is the
same.
This patch cleans a bit the suggestedby management.
There are a lot of cases to test, because linked to 2 prefs:
AnonSuggestions and OPACViewOthersSuggestions.
1/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 0
- A non logged in user is not able to make a suggestion.
- A logged in user is not able to see suggestions made by someone else.
2/ AnonSuggestions = 0 and OPACViewOthersSuggestions = 1
- A non logged in user is not able to make a suggestion.
- A logged in user is able to see suggestions made by someone else.
3/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 0
- A non logged in user is able to make a suggestion.
The suggestedby field will be filled with the AnonymousPatron pref value.
He is not able to see suggestions, even the ones made by AnonymousPatron.
- A logged in user is not able to see suggestions made by someone else.
4/ AnonSuggestions = 1 and OPACViewOthersSuggestions = 1
- A non logged in user is able to make a suggestion.
He is able to see all suggestions.
- A logged in user is able to see suggestions made by someone else.
In all cases a logged in user should be able to search for suggestions
(except if he is not able to see them).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All use cases tested, work as expected
No errors
Only comment is perhaps (in the future) a gracefull failure
when AnonymousPatron is not set, or has '0' value
Message is DBIx::Class::ResultSet::create(): Column 'suggestedby' cannot be null at ...
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Patch marks several strings in the Javascript on the OPAC detail
and result page for translation.
1) IDreamBooks*
- Activate the 3 IDreamBooks* system preferences
- Check the 'cloud' and additional content shows up correctly on
the detail and result pages
- Verify everything works as expected and the same as without the patch
2) OpacBrowseResults
- Activate OpacBrowseResults
- Do various searches
- Verify the nex, previous, browse result list features still
work the same as without the patch
Bonus: Check new strings appear in the .po files by updating one
language with the patch applied (perl translate update de-DE)
NOTE: Really should have read the test plan more closely.
I couldn't find the 'Go to detail:' section, until I clicked
'Browse results'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Using 'in the complete record' rather than 'in keyword'. I think this fits well as it seems that this means the search looks anywhere in the record.
To test:
1) In the OPAC, click on Authority Search
2) Notice that in the drop-down menu for the 'Where:' field, there is an 'in keyword' option.
3) Apply patch
4) Now says 'in the complete record'
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To test:
1) Create a list in the OPAC, name it: <script>alert('Hello');</script>
2) Delete the list
3) Confirm deletion
4) See the alert say 'Hello'
5) Apply patch
6) Recreate list with same name
7) Delete list
8) Confirm deletion and alert no longer pops up
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding |html to [% resultsperpage %] to escape the variable and get rid of the alert.
To test:
1) Go to URL such as ... /cgi-bin/koha/opac-authorities-home.pl?op=do_search&resultsperpage=1%22%3E%3Cscript%3Ealert%28document.cookie%29%3C/script%3E
2) Notice pop-up box with alert
3) Apply patch, refresh page
4) Notice alert is gone
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The synopsis of this TT plugin contains two example lines:
[% myhtml FILTER html2text(leftmargin => 0, rightmargin => 0) %]
[% myhtmltext | html2text %]
These lines have been copied (without too much thought :) to a few templates. Since we do no use the variables myhtml or myhtmltext in these templates, these lines are useless.
Test plan:
[1] Put some items in your cart. And send it.
[2] Send a shelf.
[3] Git grep on myhtml. Should not have results.
NOTE: Sent carts and lists in Intranet and OPAC successfully.
Though, this does bring into question why the letters
have HTML formatting if it is getting removed. That,
however, is beyond the scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a Koha server is configured to run over SSL, all iDreamBooks content
is blocked due to the fact that a secure page is requesting an insecure
endpoint. This is due to the fact that the urls for iDreamBooks use http
and not https. A simple fix would be to switch them to https since
browsers have to qualms about loading a secure data endpoint from an
insecure one.
Test Plan:
1) Enable iDreamBooks
2) Set up your OPAC to use https
3) Verify iDreamBooks content continues to work
Note: tested Chrome and IE, so that the IE change would be validated.
Discovered isbn semi-colon issue that is beyond scope of this bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as before for the OPAC.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Good result, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch corrects the display of current page on
a multipage recent comments.
To test:
1) Enable OpacShowRecentComments
2) Add multiple comments to multiple records
I used a script to add multiple lines like
"insert into reviews values ($i, 51, $i, 'Comment $i', 1, '2015-06-01 00:00:00')"
to table reviews
3) On OPAC, go to 'Recent comments', verify the bug
4) Apply the patch
5) Reload and check correct display
Can't found missing space near 'by' from description.
Display is correct for me.
Followed test plan, displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Fix filter labels:
Library : -> Library:
Subscription : -> Subscription:
- Make '(All)' entry in filter pull downs translatable
- Show branch name instead of branchcode in table and filter
To test:
- Verify changes as described above
- Verify filters still work as expected
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Apply this patch
2) Ensure you are using the default XSLT setting for the staff and opac record details
3) Find or create a record with MARC tags 700,710,711
4) Perform an opac search that would show the record in the search results.
5) Click title to review record.
6) Note the fields updates 700,710,711 to show subfields a, b, c, d, e, f, g, h, i, k, l, m, n, o, p, r, s, t, u, x. Multiple fields are separated by span class=separator |. Adds Related and Contained Works as new headings.
7) Repeat steps 4 - 6 for the staff interface
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
First, it is strongly recommended to set the OPACBaseURL. But
this patch allows the inclusion of the protocol and not just
a site.
Next, C4/Auth now puts OPACBaseURL into the template parameters
regardless of OPAC or Staff clients. t/db_dependent/Auth.t was
tweaked to add a check for confirming that get_template_and_user
adds OPACBaseURL to both OPAC and Staff templates.
In the staff client, once the OPACBaseURL is set, you get a nice
OPAC View link when viewing a biblio's detail. It should reflect
the protocol used now.
Hard coded 'http://' strings were removed from the
sample_notices.sql files. This is what required also updating
the letters table in the updatedatabase.pl script.
The explanation text in the sysprefs.sql needed updating too to
reflect the inclusion of the protocol. And this was the other
update done in the updatedatabase.pl script. The opac.pref file
was similarly changed as well.
catalogue/detail.pl had no need to pass a custom OpacUrl value,
since C4/Auth passes the required OPACBaseURL, so it and the
corresponding template were modified.
Both the MARC21 and NORMARC intranet details files had 'http://'
hard coded in them. This was removed.
Both the bootstrap and prog theme opac-detail template had a
protocol parameter that was used. The logic for the parameter
was not removed, because it is used extensively in one template.
Perhaps it should be used to simplify the other. However, the
calculated current_url parameter had references to the protocol
removed, because of the changes to OPACBaseURL.
opac/opac-shareshelf.pl had a hard coded 'http://' which was
removed.
t/db_dependent/Auth_with_cas.t had 'http://' added to the value
set for OPACBaseURL.
In virtualshelves/sendshelf.pl explicit code which sent the
OPACBaseURL preference was removed, since C4/Auth sends it all
the time now.
C4::Context::set_preference was tweaked to ensure that
OPACBaseURL would always start with http.
t/db_dependent/Context.t was tweaked to specifically test this.
The Shibboleth authentication needs OPACBaseURL set, and that
it be https protocol. The _get_uri routine was tweaked to always
pass back https:// as the protocol on the OPACBaseURL.
t/Auth_with_shibboleth.t was tweaked to specifically test the
changes.
TEST PLAN
---------
This is not an easy patch to test. Difficulties include:
- configuring Koha to run under https
(tweaking apache2 isn't so hard, just tricky)
- configuring Koha to run OPAC and Staff with Plak
(since code with comments about plak were sliced out)
- configuring Koha to use CAS
(may be requires for the CAS test)
1) Apply patch
2) Make sure OPACBaseURL is set without the protocol included.
UPDATEDATABASE
3) back up your DB
4) ./installer/data/mysql/updatedatabase.pl
-- It should run without errors.
5) Look up the OPACBaseURL system preference in the staff
client
-- It should have http:// prepended.
6) Run the mysqlclient from your koha git directory
USE koha_library;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- There should be no prepended http:// on the
<<OPACBaseURL>>.
7) restore your DB
8) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
AUTH
9) Call up staff client.
10) Call up OPAC.
-- C4/Auth.pm doesn't barf.
11) Call up Plack staff client
12) Call up Plack OPAC.
-- C4/Auth.pm doesn't barf.
13) prove -v t/db_dependent/Auth.t
CONTEXT
14) Home -> Koha administration -> Global System Preferences
-> OPAC
15) Modify and save OPACBaseURL to not have http:// or https://
on it.
-- It should be modified to include http://
16) Modify and save another system preference.
-- It should save normally
17) prove -v t/db_dependent/Context.t
CATALOGUE/DETAIL (tt & pl)
18) Confirm the OPACBaseURL is set
19) Navigate to any biblio details in the staff client
-- There should be a "OPAC view" link which has the
correct http:// or https:// in it.
SQL (sample notices and sysprefs)
20) Run the mysqlclient from your koha git directory
USE koha_library;
DELETE FROM letter;
source installer/data/mysql/de-DE/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/en/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/nb-NO/1-Obligatorisk/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/es-ES/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/fr-FR/1-Obligatoire/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/it-IT/necessari/notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/pl-PL/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/ru-RU/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
DELETE FROM letter;
source installer/data/mysql/uk-UA/mandatory/sample_notices.sql;
SELECT content FROM letter WHERE content LIKE "%<<OPACBaseURL>>%";
-- Each of the selects should should lines that have
<<OPACBaseURL>> starting them, but no hard-coded http://
DELETE FROM systempreferences;
source installer/data/mysql/sysprefs.sql;
SELECT * FROM systempreferences WHERE variable='OPACBaseURL';
-- The explanation should reflect the new explanation.
QUIT
21) restore your DB
22) Make sure OPACBaseURL is set with the protocol included,
preferably https.
-- Using https requires a bunch of apache2 tweaks.
SLIM2INTRANETDETAIL
23) Set 'XSLTDetailsDisplay' system preference to default.
24) Set 'marcflavour' system preference to MARC21.
25) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
26) Set 'marcflavour' system preference to NORMARC.
27) View any biblio's details.
-- the URL beside 'OPAC View' should have the appropriate
http:// or https://
OPAC-DETAIL
28) Set 'opacthemes' to bootstrap.
29) Set 'SocialNetworks' to enabled.
30) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
31) Set 'opacthemes' to prog.
32) In OPAC, view any biblio's details.
-- the Share links should have the appropriate protocol on
the OPACBaseURL.
AUTH_WITH_CAS
33) prove -v t/db_dependent/Auth_with_cas.t
OPAC-SHARESHELF
34) Set 'OpacAllowSharingPrivateLists' to allow.
35) In OPAC, 'Save to Lists' a search result.
36) Save it to a new private list.
37) Click the Lists button, and select the new list.
38) Click the Share button.
AUTH_WITH_SHIBBOLETH
39) prove -v t/Auth_with_shibboleth.t
-- needs to be tests on Debian, because I can't get
the Test::DBIx::Class installed in Ubuntu. :(
Rebased again on kohadevbox...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The original concern of bug 14266 was to provide a compatibility for
<IE9.
But actually we don't need to trim the email address template side.
It will even better to trim it in the perl script, so that the email
will be trimed even if JS is disabled.
Test plan:
1/ Share a list and does not provide any email address
2/ Submit
=> The form is not submited, no alert/message is displayed (same as
before this patch).
3/ Share a list and provide an email address with spaces before and
after
4/ Submit
=> You should receive the email
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Test output compliant with expected test plan outcome.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch replaces trim() with $.trim() which is supported
in versions of IE older than IE9.
Revised test plan
=================
Before applying patch:
0) Use IE 8 or Document Mode 8 in a newer IE using F12 Developer Tools
1) Set OpacAllowSharingPrivateLists to "Allow" in Global System Preferences
2) Create a private list in the OPAC
3) Add a record to the private list
4) Click "Share" or "Share list" on one of the list screens
5) Type in an email address and click "Send"
6) Note the error in the console log
7) The page should submit
Apply the patch:
7) Hold shift + refresh the browser to update any Javascript cache
8) Try to "Share" the list again
9) Note that the form submit after clicking "Send" and
that there are no errors in the console log
http://bugs.koha-community.org/show_bug.cgi?id=14266
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Remarks: Works as per revised test plan
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Same as previous patch for opacuserjs
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: Worked before and after updatedatabase.pl, though after
is less confusing to the programmer unaware of case-insensitivity.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The display of links found in 856$u for NORMARC has not been keeping up with
the one for MARC21, and several sysprefs have not been implemented. This
patch tries to fix that.
Affected sysprefs:
- OPACURLOpenInNewWindow
- URLLinkText
- OPACDisplay856uAsImage
- OPACTrackClicks
To test:
- Make sure you have a record with a URL in 856$u and marcflavor = NORMARC.
(It does not have to be a full NORMARC setup or a NORMARC record, just make
sure you are viewing the record through the NORMARC XSLT files.)
- View the record both in a result list and in detail view
- Check that the 4 involved sysprefs affect the display in the expected ways
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested on NORMARC setup and XSLTs
Works as described, each syspref works
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Since it only affects NORMAC, I trust in Magnus :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch will resolve the issue of not being able to
search with parens in a subject heading by editing the xslt
To test:
* Apply patch
* Search Koha for a title with ( ) in the subject
* Click the subject
* Results should be returned
* Repeat in OPAC and Staff client
Signed-off-by: Nick <Nick@quechelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Tested wit OPAC, full list is printed.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The phrase
Please type this following characters into the preceding box
should be
Please type the following characters into the preceding box
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the OPAC and the intranet, the urls don't be displayed anymore.
The variables used in the templates are not the good ones (MARCurlS vs
MARCURLS).
Test plan:
1/ On the intranet side, add some urls to some records
2/ Add these records to the basket
3/ Add records without urls defined
4/ Go on the basket view, click "more details"
5/ You should see the urls displayed
6/ Repeat steps 4-5 at the OPAC
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: 856$u displays now in intranet and OPAC. :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes extraneous stuff from prints - toolbars, breadcrumbs, etc.
To test:
1. make a list
2. print it to a file (from OPAC), observe wasted paper
3. apply patch
4. print list, compare
5. if you like it, sign off. ;)
Patch cleans up OPAC list printing as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
NOTE: Made functional again. Turns out my issues were a result of
cached CSS pages. Tested in IE and Firefox successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the following changes:
1) If there is no logged in patron, the RSS link states it is for
system-wide news.
2) If a patron is logged in, the RSS link states it is for system-wide
news *and* news for the patron's home library.
3) The patron's home branch code is embedded in the RSS feed url so
he or she no longer needs to be logged in for us to know what branch's
news to pull.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes an invalid URL when clicking
on RSS feed.
To test:
1) Using Nicole words :)
If you visit : http://mykoha/cgi-bin/koha/opac-main.pl
then the RSS feed works.
If you're on http://mykoha and you click the rss icon you
get : http://mykoha/opac-news-rss.pl which is a 404 page.
2) Apply the patch
3) Repeat 1, error is now fixed
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The RSS button used to read ' RSS for the librarys general newsfeed.'
This included one grammatical error and I think included more words
than most average people would read. This patch simplifies it to say
'RSS for Library News.'
To test:
* Apply all patches
* Review RSS feed button's text on main page under news
http://bugs.koha-community.org/show_bug.cgi?id=7843
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1/ use strict and warnings are useless, Modern::Perl is used
2/ Prefer to use the interface and theme TT var instead of the hard
coded path
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
* Install the patch
* Make shure there is news in the Opac
* Go to the Opac (opac-main.pl)
* Make shure you see an RSS icon below the news and a short text.
* Click the RSS icon and verify that you get an RSS feed that validates.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I took the liberty of fixing the copyright statement when signing it off
Signed-off-by: Pierre <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If error occurs when generating the pdf, it would be better to get an
encapsulated error instead of the "software error" message in the pdf
file.
To test this patch I added this change:
b/Koha/Borrower/Discharge.pm
-115,6 +115,7 @@ sub generate_as_pdf {
say $html_fh $html_content;
close $html_fh;
my $pdf = PDF::FromHTML->new( encoding => 'utf-8' );
+ $html_path .= "poeut";
$pdf->load_file( $html_path );
$pdf->convert;
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch. It adds new package and files for the new
pages (opac-discharge, members/discharge and members/discharges).
At the intranet, it is now possible to generate a discharge for a patron.
At the opac, a patron can request a discharge and a discharge if it has
been validated by a librarian.
Requirements:
The perl module PDF::FromHTML
New sysprefs:
- useDischarge: Allows librarians to discharge borrowers and borrowers
to request a discharge
New letter with a letter_code DISCHARGE.
Test plan:
- Switch on the syspref useDischarge.
- Verify a new tab appears in the patron page (intranet and opac).
- Verify the discharge cannot be generated if the patron has issues.
- Verify the patron can request a discharge from it's opac area.
- The request appears on the main page (intranet).
- Generate the discharge from the intranet.
- Try to download it (from the opac and the intranet).
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- links to the new pages.
- syspref description
- links on the main page (intranet)
- the DISCHARGE type for debarment
Signed-off-by: Lucie <lucie.rousseaux@dracenie.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Apply this patch
2) Create one or more public lists
3) View the list in the opac
4) Note the new RSS icon next to the list name
5) Open the link in FireFox or an RSS reader
6) You should see an RSS feed of your list with the title
and author of each item as a hyperlink to the record details
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add the same behavior as previous patches for the xslt view.
Signed-off-by: valerie bertrand <valerie.bertrand@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
