Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- global replaced HightedStopWords syspref with NotHightedWords for
clarification purposes. Hopefully this is a bit better and still
not too verbose.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixed some tabs and a typo.
- changed sample words to and|or|not in sysprefs.sql and
updatedatabase
- changed systempreference name from OpacHighlightedStopwords
to HighlightedStopwords, as it also works for the staff
results page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch adds a system preference to control stopwords used to
prevent operators and other 'minor' words from being highlighted
in search results when the OpacHighlightWords syspref is enabled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised, I fixed the updatedatabase to use XXX so it won't
clash as much
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase.pl.
Also fixed tabs in opac-detail.tt
Feature passes all tests and QA script now.
Tested in intranet and OPAC with different words and searches.
Works on results pages and OPAC detail page.
Highlighting and unhighlighting still works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as expected.
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When a patron has many checked out items, circulation.pl can take a very
long time to load ( on the order of minutes in some cases ). This is
primarily due to the processing of the previous checkouts list. If we
convert to this table to a datatable that fetches its data via ajax, we
can make circulation.pl far more responsive. The same should be done
with relative's checkouts as well.
Test Plan:
1) Apply this patch
2) Observe that the checkouts and relatives' checkouts tables
are now loaded asynchronously
3) Observe and verify the renew and return actions are now
ajax based and function in a manner equivilent to how they
used to.
This bug had quite a few followups, so I squashed all of them into one
change so that code is easier to follow. Original commit messages are below:
Bug 11703 - Use the ajax datatables on patron details page
Bug 11703 - Convert holds tables to ajax datatables
Bug 11703 [QA Followup 1] - Center bProcessing message over table
Bug 11703 [QA Followup 2] - Remove icons from checkout and clear buttons
Bug 11703 [QA Followup 3] - Remove references to UseTablesortForCirc
Bug 11703 [QA Followup 4] - Add back in Today's checkouts/Previous checkouts rows
Bug 11703 [QA Followup 5]
Bug 11703 [QA Followup 6] - Move strings to an include file for translation purposes
Bug 11703 [QA Followup 7] - Fix issues spotted by koha-qa.pl
Bug 11703 [QA Followup 8] - Speed up api/checkouts.pl as much as possible
Bug 11703 [QA Followup 9] - Move scripts from api directory to svc directory
Bug 11703 [QA Followup 10] - Fix errors caused by rebase
Bug 11703 [QA Followup 11] - Prevent multiple fetchs from ajax source
Bug 11703 [QA Followup 12] - Fix problem detected by koha-qa.pl
Bug 11703 [QA Followup 13] - Removed uneccessary data from renewal box during renewal
Bug 11703 [QA Followup 14] - Fix table column span
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Test plan on bug report:
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11703#c98
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
This preference had misleading language, this patch changes it a bit
to make it clearer.
To test:
* Apply patch
* Visit System Preferences
* Go to Circulation Tab
* Read description of AllowMultipleIssuesOnABiblio preference
* Confirm that it is clearer
http://bugs.koha-community.org/show_bug.cgi?id=12231
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
String patch, no errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the Koha system preference OPACItemHolds allows a library
system to choose to allow patrons to place bib and item level holds from
the OPAC, or to allow patrons only to place bib level holds only from
the OPAC.
This patch set adds a third option, "force", which *requires* that
patrons place item level holds from the opac, with no option of making a
bib level hold.
This patch modifies the system preference OPACItemHolds to be of the
type "Choice", with the choices being "no", "yes", "force". The patch
does not alter the currently set value of OPACItemHolds for database
updates, only adding the additional option.
Test Plan:
1) Set OPACItemHolds to "no". Check that OPAC holds behave as it is now
(no "Place On" column, no "Select a specific copy" table, making a
reserve is successful)
2) Set OPACItemHolds to "yes". Check that OPAC holds behave as it is now
( "Place On" column is there, "Select a specific copy" table shows when
"A specific copy" is selected, making a reserve is successful)
3) Set OPACItemHolds to "force". Check that OPAC holds behave as follows:
- no "Place On" column is present
- "Select a specific copy" table is opened
- making a reserve is successful
This patch is a squashed patch of the 3 following patches:
Amended opac-reserve.tt accordingly
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Followup prevent submission without choosing an item
+ Fix some ergonomic issues in opac-reserve
Signed-off-by: Delaye Stephane <stephane.delaye@biblibre.com>
Bug 7825: Updatedatabase should only change the type and options values.
The value field should not be changed. We have to keep '1' for 'yes' and ''
for 'no'.
Original patch is from Srdjan Jankovic.
Signed-off-by: Koha team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on 4th patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) View some records with authorities
4) Note your previously set authority separator should still be in use
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The "Creators" tab in the system preferences editor had only one
preference. In order to consolidate the display as well as to
address the issue that "creators" doesn't have much of a connection
to "patron cards", the ImageLimit system preference is moved to
the Tools tab by this patch.
To test:
[1] Verify that the ImageLimit preference now shows up in the
Tools tab in the system preference editor (along with an
existing Tools preference, MaxItemsForBatch.
[2] Verify that the sysprefs editor no longer has a "Creators"
tab.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch did not correctly construction ISBN phrase
searches when QP is on. Unfortunately, when attempting to fix that,
I discovered that there's a deep bug in QP that makes it generate
incorrect search queries when combining more than two atoms
in with the || operator. Consequently, until that can be fixed,
this patch ensures that if UseQueryParser is on, AggressiveMatchOnISBN
has no effect.
To state it anther way, AggressiveMatchOnISBN works only when QP
is not in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Catalog a record with the ISBN "0394502884 (Random House)"
2) Export the record, edit it so the ISBN is now
"0394502884 (UnRandomHouse)"
3) Using the record import tool, import this record with matching
on ISBN.
4) You should not find a match
5) Apply this patch
6) Run updatedatabase.pl
7) Enable the new system preference AggressiveMatchOnISBN
8) Repeat step 3
9) The tool should now find a match
Signed-off-by: Tom McMurdo <thomas.mcmurdo@state.vp.us>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes a couple of issues:
- disable the feature by default.
- use the datatables include file.
- fix the syspref description.
- replace "History search" with "Search history".
- replace biblio with catalog
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Like OPAC, the search history is now available for intranet. This
is controlled by the EnableSearchHistory system preference.
Test plan:
1/ Switch on the 'EnableSearchHistory' syspref.
3/ Launch some biblio and authority searches.
4/ Go on your search history page (top right, under "Set library").
5/ Check that all yours searches are displayed.
6/ Click on some links and check that results are consistent.
7/ Delete your biblio history searches.
8/ Delete your authority searches history searches.
9/ Launch some biblio and authority searches
10/ Play with the 4 delete links (current / previous and biblio /
authority).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Fixes a typo in one of the OPAC messages: "you account"
- Fixes the updatedatabase script to use 1 instead of yes for the
system preference default matching the sysprefs.sql file.
- Fixes capitalization "Don't Block" in system preference
description.
- Adding . to the end of the warning, when renewals are blocked.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a patron, note the patron's category
5) Issue an item to this patron
4) Edit that category, set "Block expired patrons" to "Block"
5) Verify the patron cannot renew or place holds in the OPAC
6) Edit the category again, set "Block expired patrons" to
"Don't block"
7) Verify the patron *can* renew and place holds in the OPAC
8) Edit the category again, set "Block expired patrons" to
"Follow system preference BlockExpiredPatronOpacActions"
9) Set the system preference BlockExpiredPatronOpacActions to
"Block"
10) Verify the patron cannot renew or place holds in the OPAC
11) Set the system preference BlockExpiredPatronOpacActions to
"Don't block"
12) Verify the patron *can* renew and place holds in the OPAC
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- the blank line is now useless
- add an example for the syspref value
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds:
- 1 syspref MarcFieldsToOrder
- 1 Ajax script acqui/ajax-getauthvaluedropbox.pl
- 1 routine C4::Budgets::GetBudgetByCode
Before this patch you were not able to order 1 or all the records from
your staged file. You were allowed to specify some information ("Import
All" and "Accounting details" areas) for the order.
With this patch, the previous behaviour still exists.
But now you can *select* which records you want to ordered.
For these ones you can specify independently quantity,
price, budget, sort1 and sort2.
The cherry on the cake is that you can pre-fill these fields with
values from the MARC record.
Test plan:
1. Fill the new syspref MarcFieldsToOrder with something like:
==BEGIN==
price: 947$c
quantity: 969$h
budget_code: 922$a
rrp: 010$d
discount: 969$d
sort1: 923$a
sort2: 924$a
==END==
The empty line at the end is mandatory!
The budget (corresponding to your budget_code) can be filled with
authorized value categories (statistic 1 and 2).
The sort1 and sort2 values can be filled with the an authorized value
(of the category previously selected)
2. Choose randomly one or more biblio(s) and fill fields with what is
relevant.
3. Export the biblio and import it (with the "Stage MARC records for
import" tool).
4. Go on a basket and add an order from a staged file. Select your
staged file.
5. Well. Now you can see your biblio (or biblios if your had exported
more than one). For each one, fields should be pre-filled with the
biblio values. The budget should be selected on the budget
corresponding to the budget_code (in the field 922$a) and the
"planning values" too (with fields 923$a and 924$a).
You can modify these values (or not) and choose a default value for
budget and planning values (in the "Accounting details" area).
6. Save and check the prices values. Modify the order and check that
budget and sort* are good
Prices are calculated following some parameters:
if there is no price => listprice = 0
else =>
- the gstrate value for your order is the gstrate value of the bookseller
- discount = if filled : the discount value / 100
else: the discount value of the bookseller
- if the bookseller includes tax( List item price includes tax: Yes )
if a discount exists:
ecost = price
rrp = ecost / ( 1 - discount )
else: # a discount does not exist
ecost = price * ( 1 - discount )
rrp = price
else # the bookseller does not include tax
if a discount exists:
ecost = price / ( 1 + gstrate )
rrp = ecost / ( 1 - discount )
else: # a discount does not exist
rrp = price / ( 1 + gstrate )
ecost = rrp * ( 1 - discount )
- in all cases:
listprice = rrp / currency rate
unitprice = ecost
total = ecost * quantity
7. Retry with different parameters
8. Check the 'Import all' action still works
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sometimes libraries need to backdate returns further back in time than
Koha's dropbox mode will allow. The returns backdating will check in an
item as if it had been returned on the specified date, and will reduce
any fine accordingly.
This feature is activated by a new system preference, SpecifyReturnDate.
Test Plan:
1) Apply this patch
2) Check out an item, and backdate the due date by 1 month or so
* This issue needs to generate a fine
3) Run fines.pl to generate the fine
4) Browse to returns.pl
5) Specify a return date of the day after the specified due date
6) Check the borrowers issue history, you should see the backdated
return date, rather than today's date
7) Check the fine, it should be reduced to a fine for a single day
overdue, rather than the previous larger fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Knibbs <BKnibbs@farmingtonlibraries.org>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The current "Library" facet is somewhat ambiguous for Koha installations
with multiple libraries. It refers to the holdingbranch, but does not
explicitly state this. It would be beneficial to allow the administrator
to choose to show facets for the holding library, home library, or both.
In addition, the facets should be more explicitly labeled. This patch
adds this flexibility.
Test plan:
1) Apply this patch
2) Check that the facets label "Libraries" now reads "Holding libraries"
3) Update the system preference DisplayLibraryFacets to "home library"
4) Check that the facet now reads "Home libraries"
5) Update the preference again to "both home and holding library"
6) Check that both the facets for home and holding library are now
displayed.
Signed-off-by: Jen DeMuth <jdemuth@roseville.ca.us>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Changes apply to both prog and bootstrap OPAC and staff client.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new system preference, AllowMultipleIssuesOnABiblio.
If this system preference is OFF, an alert is raised if a patron
tries to check out an item even when they already have a different
item checked out from that bib.
The librarian can force the checkout anyway.
It doesn't alert the librarian if the biblio is a subscription
Test plan:
1. Create a biblio with at least 2 items
2. Checkout the first item for a borrower
3. Set syspref AllowMultipleIssuesOnABiblio to OFF.
4. Try to checkout the second item with the same borrower. A message
should appear telling you that this borrower already borrowed an item
from this biblio.
If you have the permission 'force_checkout' You should also see two
buttons to confirm (or not) the checkout
5. Click on 'No'. The checkout is not done
6. Repeat step 4 and click 'Yes', the checkout is done.
7. Return the second item.
8. Set syspref AllowMultipleIssuesOnABiblio to ON
9. Try to checkout the second item with the same borrower. This time
the checkout is done without warnings.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, works well. Tested:
* Permission to override
* check out a second item from a record with subscriptions works
* check out a second item from a 'normal' record is warned about,
but can be done
* No permission to override
* subscription item: can be checked out
* normal item: can't be checked out
* Feature turned off
* Check out never warns/blocks
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch handles:
[1] The response (acceptance) by the invited person.
If the person accepts this share, the private list of the sender will
be shown under Your lists on the shelves page. In OPAC 'Your private
lists' has been renamed to Your lists (just as in Staff). The Type
column shows Private or Shared for these lists; a list appears as
Shared as soon as an invitation has been accepted. The owner has the
options to Edit, Delete or Share; the invited person does not have
these options on the shared list.
[2] Removing an accepted share.
If a user accepted a share, they should also be able to remove it again.
The Remove Share button is visible on OPAC when viewing Your lists or
a particular shared list.
Note: AddShare has been extended to return a possible database error.
If the share invite could not be added, a mail will not be sent.
Test plan (for prog theme):
Enable pref OpacAllowSharingPrivateLists
User 1 creates new private list P1, perms: D-A-D, adds 2 items, sends share
User 1 checks your lists display: is P1 Private with Edit button?
User 2 accepts share: sees P1, but cannot add or delete items
User 2 checks your lists display again: P1 shows Shared without Edit?
User 1 checks your lists display again: P1 shows Shared with Edit?
User 2 tries to accept share again: should fail now
User 3 tries to accept share: should also fail
User 3 tries again, modifies shelfnumber and/or key in url: should also fail
User 2 creates new private list P2, perms: A-A-A, no items, sends share
User 2 checks your lists display: P2 shows Private with Edit?
User 1 accepts, adds one item
User 1 checks your lists display: P2 shows Shared without Edit?
User 2 checks your lists display: P2 shows Shared with Edit?
User 2 deletes item of user 1 (allowed)
User 2 deletes list P2
User 1 checks your lists display in opac or staff: P2 is gone?
User 1 creates private list P3, sends a share.
User 1 creates private list P4, adds one item, sends a share.
User 2 accepts the share for P3.
User 2 checks the shelves display, and removes share P3.
User 2 accepts the share for P4.
User 2 views shelf P4 with one item and confirms Remove share on that form.
User 2 checks shelves display again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In Advanced Search, the list of available language is long and will only
get longer. For a library offering books in 2-3 languages, that is
offering too many options to the user (most of the small libraries we
deal with only offer documents in two languages).
Code changes:
Languages.pm: Extract getAllLanguages to make a more customizable
getLanguages (have getAllLanguage call it, so rest of codebase is
oblivious to the change). Build array returned based on system pref if
corresponding argument is set.
search.pl and opac-search.pl: call getLanguages instead of
getAllLanguages.
TESTING
0) All language codes are iso 639-2 (three characters)
1) in OPAC, Advanced search, open Language box, acknowledge 30+ items.
2) in Intranet, go to system preferences AdvancedSearchLanguages,
enter "ita|eng"
3) back in OPAC, refresh screen, acknowledge only Italian and English
are listed.
4) in Intranet, click Search then click "More options" to make the
Language box appear. Acknowledge limited options.
5) Regression Test: Back to the preference, empty the field then save.
Go back to the OPAC and Intranet search, refresh the page, then the
Language drop-box will now contain 30+ items.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On a failed login, the default message is harcorded into opac-auth.tt.
It would be preferable to allow for a preference to override that message (for example: ...Please bring an ID to t
The changes modify
-opac-auth.tt to allow for custom value
-admin/preferences/opac.pref to add it to the preferences with a description
-C4/Auth.pm for the loading of the preference
-sysprefs.sql
-updatedatabase.pl
TESTING
1) in OPAC, logged out, try login in by entering no or wrong credentials. Acknowledge the "Don't have a p
2) Apply the patch
3) Regression Test: Redo step 1. Same (default) message should appear.
4) Log in to intranet,
- select NoLoginInstructions in system preferences.
- Enter new (xml) message. Possible:
<h5>Welcome to Koha, please bring your passport to the front office</h5>
- and save
5) refresh the OPAC, try login again with invalid credentials. The new message should appear.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Test plan:
Fill the OPACMySummaryNote with HTML code or just text.
The content should be displayed at the OPAC on the summary page for
patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Rephrased the pref text a little bit, using 'logged in' instead of
'connected', also added " so the description appears correctly in the
pref editor.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Check appearance of the OrderPdfFormat system preference
It will offer a pull down with options, including
"German 2-page"
Followed test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As it happens, the AllowRenewalLimitOverride serves to both allow
operators to override renewal blocks when the renewal exceed the
maximum renewal count or when the renewal is premature. This
patch adjust the wording to reflect the expansion in meaning; if
it turns out that folks want to distinguish between overriding the
maximum renewal count and overriding premature renewals, a new
system preference can be added later.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch correct english display for OAI-PMH:ConfFile syspref,
and makes it's strings translatable
To test:
1) On Administration > System preferences > Web Services
OAI-PMH:ConfFile syspref doesn't have description before
file box. Text after that box is not translated.
2) Choose your prefered language, xx-YY, update po files
cd misc/translator
perl translate update xx-YY
3) Look into xx-YY-pref.po for any occurence of "YAML", there is none
4) Apply the patch
5) Update po files again
6) Look into xx-YY-pref.po, now there are 2 entries
7) Also reload page from 1) and check for text before
file box.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works for me as described, only changes YAML pref file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch converts the OrderPdfFormat to a choice.
To test:
[1] Look at OrderPdfFormat in the system preferences editor. Verify
that there is a drop-down giving a choice among the three PDF
basketgroup printing formats.
[2] Change the OrderPdfFormat setting and print a basketgroup. Verify
that the chosen template is used.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I followed the test plan. Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Improves usability of the OrderPdfFormat system preference.
Works as described, only changes YAML file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch finishes the work started in one of the previous
follow-ups and allows CardnumberLength to be set to a value
like ',5'. In conjunction with not including cardnumber in
BorrowerMandatoryField, this allows a cardnumber to not be
required but, if present, to not exceed the specified length.
This patch also updates t/db_dependent/Members.t so that
it runs in a transaction, tests the new return value
of checkcardnumber, and manages the CardnumberLength syspref.
To test:
[1] Verify that prove -v t/db_dependent/Members.t and
prove -v t/Members/cardnumber.t pass.
[2] Set CardnumberLength to ",5" and take cardnubmer out of
the BorrowerMandatoryField list.
[3] Verify that you can save a patron record without a cardnumber,
but if you supply one, that it can be at most 5 characters long.
[4] Add cardnumber back to BorrowerMandatoryField. This time, the
minimum length is 1 even though CardnumberLength is ",5".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I'd rather have a comma than a coma :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Then again, if the cookies are really, really good, a cookie-induced
coma would not be the worst thing.
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some dead code concerning the handling of patrons
that are members of other, institutional patrons. This code did not
work; removing it clears the field if somebody wants to do a better
implementation of such relationships between patrons.
This patch:
[1] Removes the memberofinstitution system preference.
[2] Removes the following routines:
C4::Members::get_institutions()
C4::Members::add_member_orgs() (and removing this routine
removes a reference to a borrowers_to_borrowers table that
does not exist).
There should be no changes whatsoever to system functionality with this
patch (with the trivial exception of the absence of the
memberofinstitution system preference).
Test plan:
[1] Look at the code and use grep, git grep, etc. verify this patch
does not remove something in use.
[2] Verify that there are no regressions upon adding or editing
a patron record.
[3] Verify that the memberofinstitution system preference has been
removed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Until now, the maximum number of item records to process in a batch was
hardcoded to 1000.
This patch adds a syspref MaxItemsForBatch in order to allow to adapt
this value.
Test plan:
- set the pref to 2
- try to delete a batch of 3 items: they are not displayed
- try to modify a batch of 3 items: you are not allowed to do that
- set the pref to 1000 and try again. Now items are displayed and you
are allow to modify them.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
AllowHoldsOnDamagedItems will stop item-specific holds from being placed
on damaged items, but does not stop Koha from using damaged items to
fill holds. This seems like incorrect behavior.
Test Plan:
1) Set 'AllowHoldsOnDamagedItems' to "Don't Allow"
2) Pick an item, set it to damaged
3) Place a bib-level hold on this item's record
4) Scan the item though the returns system
5) Koha will ask to use this item to fill the hold, click "ignore"
6) Apply this patch
7) Repeat step 4
8) Koha will not ask to use this item to fill the hold
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Updating pref descriptions for ReservesNeedReturns and ILS-DI:AuthorizedIPs.
Just sideway related to this report, but not important enough to separate.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the number of items to display is hardcoded (50).
But the perl script loads all items before to check if the number of
items is oversized.
This patch adds a new pref OpacMaxItemsToDisplay (default to 50). If the
*total* number of items for a biblio is greater, no item is displayed
and a link allows to display all items.
Test plan:
1/ search a biblio with many items
2/ set the pref according the number of items you want to display
3/ verify the items are not displayed if the number of items is greater
the pref value
4/ enable the OpacSeparateHoldings pref and verify the items are
displayed in different tabs (if items have different locations).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch rephrases the description or examples of 5 sysprefs:
1/ MARCAuthorityControlField008: "MARC" -> "MARC21"
2/ itemcallnumber: "Examples" -> "Examples (for MARC21 records)"
3/ DefaultLanguageField008: "Range 35-37" -> "Range 35-37 of MARC21 records"
4/ MARCOrgCode: "new MARC records" -> "new MARC21 records"
5/ UNIMARCAuthorityField100 description: "Do NOT include the date
(position 00-05)." -> "position 08-35. Do NOT include the date
(position 00-07)."
It also adds description in SQL systempreferences table for
UNIMARCAuthorityField100, MARCAuthorityControlField008 and MARCOrgCode.
Test plan:
- Apply and run updatedatabase.pl
- Check the changes are taken into account in syspref administration
page
- Check the changes are taken into account in systempreferences table
(for UNIMARCAuthorityField100, MARCAuthorityControlField008 and
MARCOrgCode)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The name of a staff member who managed a suggestion is shown in the
the OPAC if the new system preference OpacSuggestionManagedBy is set to
'Show'. This is also the default.
If the preference is set to 'Don't show' the staff members name
is not displayed and the column 'Managed by' in the table of
suggestions in the patron account is not displayed.
To test:
- Create a one or more suggestions
- 'Manage' them by accecpting or rejecting
- Go to your patron account and check that the staff member name is
shown for your suggestions
- Apply patch, run database update
- Check the name is still shown
- Switch the preference to 'Don't show'
- Check the name is no longer shown and the table still displays
correctly, but without the 'Managed by' column
- Repeat those tests for both bootstrap and prog theme!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works as advertised, the only little nitpick is you could just do
[% IF Koha.Preference( 'OpacSuggestionManagedBy' ) %]
However you are following the custom in that file already, so that's
fine
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch adds the SelfCheckReceiptPrompt to control
whether receipts are automatically printed when a patron
finishes a SCO session. This is on by default during
new installations and upgrades.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the description of the AcqItemSetSubfieldsWhenReceived
system preferences to clarify that it applies to updating items
during order receipt, if those items where created when the order was
placed.
Test plan:
Update the updatedb entry and search the pref in the admin module.
The explanation should have been updated.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new tab "Acquitition details" on the catalogue detail
page. It provides a list of order made for this biblio.
New system preference:
AcquisitionDetails: Hide/Show the new tab. The default for
new and upgraded installations is to display the new tab.
Test plan:
1/ Apply the patch.
2/ Select the "placing an order" value for the AcqCreateItem pref.
3/ Create a new order with X items.
4/ Go on the catalogue detail page for the selected biblio.
5/ Click on the "Acquisition details" tab and check that your order is
displayed. Itemnumbers are present in the last column. Check that links
are not broken.
6/ Close your basket.
7/ Status become "Ordered"
8/ Receive X-1 items.
9/ Come back on the catalogue detail page. There are 2 orders: 1
complete and 1 partial. The complete one has a receive date.
10/ Receive the last item.
11/ Now you have 2 orders with a complete status.
12/ Cancel the last receipt.
13/ You have 1 ordered and 1 complete (2 items).
14/ Cancel the first receipt.
15/ You have 1 ordered (3 items).
16/ Delete your order
17/ You have 1 deleted order.
18/ Switch the AcqCreateItem pref to "receiving an order"
19/ Do again steps 3 to 17.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a third option to the CircAutoPrintQuickSlip system
preference. The three options are now:
* print quick slip
* print regular slip
* clear the screen
Test plan:
1. Set the System Preference for CircAutoPrintQuickSlip to "clear the
screen".
Enter a borrower barcode for checkout
Press Enter
The screen should be cleared.
2. Set the System Preference for CircCircAutoPrintQuickSlip to "open a
quick slip window"
Enter a borrower barcode for checkout
Press Enter
A Quick slip is printed.
3. Apply the patch
Update the database using UpdateDatabase.pl
4. Set the System Preference for CircAutoPrintQuickSlip to "clear the
screen".
Enter a borrower barcode for checkout
Press Enter
The screen should be cleared.
5. Set the System Preference for CircCircAutoPrintQuickSlip to "open a
quick slip window"
Enter a borrower barcode for checkout
Press Enter
A Quick slip is printed.
6. Set the System Preference for CircCircAutoPrintQuickSlip to "open a
slip window"
Enter a borrower barcode for checkout
Press Enter
A Slip is printed.
7. Reload the database using sysprefs.sql
Set the System Preference for CircAutoPrintQuickSlip to "clear the
screen".
Enter a borrower barcode for checkout
Press Enter
The screen should be cleared.
8. Set the System Preference for CircCircAutoPrintQuickSlip to "open a
quick slip window"
Enter a borrower barcode for checkout
Press Enter
A Quick slip is printed.
9. Set the System Preference for CircCircAutoPrintQuickSlip to "open a
slip window"
Enter a borrower barcode for checkout
Press Enter
A Slip is printed.
10. Verify that the Checkout Help includes information about printing Slips.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adding some text to the pref description referring to OPAC display.
Test plan:
Look at the new description in Cataloging preferences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If items are created when ordering, this patch allows to add a value for
some items subfields.
Test plan:
Define status for items.notforloan (mapping 995$o in unimarc), for
example 4:On order, 5:On treatment
Set the Syspref AcqCreateItem on "ordering".
ACQ framework : set default value = 4 for 995$o (in unimarc)
Syspref AcqItemSetSubfieldsWhenReceived : set "o=5|b='foo bar'"
When ordering the item, default status will be 4 ; when receiving the
item, status will be changed from 4 to 5. The subfield b have to contain
'foo bar'
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add a column in the items table of catalogue/detail.pl that
contains checkboxes for item selection and a drop-down list of actions
that can be executed for the selection of items.
Currently available actions are:
- Delete selected items: redirect to batch items deletion
- Modify selected items: redirect to batch items modification
Item selection is only enabled if the new syspref
StaffDetailItemSelection is ON.
Actions are not displayed if user doesn't have the right permissions.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Further testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds an HTML5-based offline mode to Koha's existing
circulation module, allowing librarians to check out items using a
basically familiar interface. The feature will be implemented using
the Application Cache and IndexedDB features of the HTML5 specification,
both of which are fully supported on Firefox 10+ and Chrome 23+, with
limited support going back to Firefox 4 and Chrome 11. The basic
workflow enabled by this patch is as follows:
Part 1: While connected to the Internet
1. Enable offline functionality by turning on the
"AllowOfflineCirculation" system preference.
2. Sync the offline circulation database on the computer that will be
used for offline circulation by following the "Offline circulation
interface" link on the Circulation home page, choosing "Synchronize (must be online)",
and clicking the "Download records" button. This process may take a while.
3. Bookmark /cgi-bin/koha/circ/offline.pl (the page you are currently
on) for easy access when offline.
Part 2: While disconnected from the Internet
4. Navigate to /cgi-bin/koha/circ/offline.pl using the bookmark you
created while online.
5. Start checking books in by scanning the barcode of an item that has
been returned into the box in the "Check in" tab.
6. Scan the barcodes of any additional items that have been returned.
7. Start checking out books to a patron by scanning the patron's barcode
in the box in the "Check out" tab.
8. Set a due date (the "Remember for session" box will be checked by
default, since circulation rules are not computed during offline
transactions and therefore a due date must be specified by the
librarian).
9. Scan an item barcode (if you did not set a due date, it will prompt
you) to check the item out to the patron.
10. If a patron has a fine you can see the total amount (current to when
the offline module was synced), and record a payment. Unlike when in
online mode, there will be no breakdown of what item(s) fines are
for, and you will only be able to record the payment amount and not
associate it with a particular item.
Part 3: While connected to the Internet
11. Click the "Synchronize" link and choose "Upload transactions" to
upload the transactions recorded during the offline circulation
session.
12. Navigate to /cgi-bin/koha/offline_circ/list.pl (there will be a
link from the Offline circulation page) and review the
transactions, as described in the documentation for the Firefox
Offline circulation plugin:
http://wiki.koha-community.org/wiki/Offline_circulation_firefox_plugin
RM note: the IndexedDB jQuery plugin bundled with this patch is
copyright 2012 by Parashuram Narasimhan and other contributors and is
licensed under the MIT license. The home page for the plugin is
http://nparashuram.com/jquery-indexeddb/.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well, no koha-qa errors
Test with Firefox 24.0
1) did some checkouts pre sync
2) synchronize database (Download)
3) go offline
4) Proceed to checkin some items from patron
5) Proceed to checkout items to patrons, setting date
6) Proceed to checkout to expired patron, warning appears
7) go online
8) Upload records
9) go to review transacctions and proceed
10) verified on patrons that checkin/out are done
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After some thought, I had to reformulate what this pref does.
No code changes here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The descriptions for OPACBaseURL and staffClientBaseURL are not explicit
about including a trailing slash or not. This patch makes it explicit
that the trailing slash should *not* be included.
To test:
- Apply the patch
- Search for "baseurl" in the system preferences
- Check that the description of both sysprefs includes a warning about
not including a trailing slash.
- Sign off
If you want to check that the trailing slash is in fact superfluous you
can do something like 'grep -r "BaseURL" *' and check that these
sysprefs are usually concatenated with some string that starts with a
slash.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes to the description appear correctly on both system
preferences.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When issuing a book, some libraries want to issue by title or other details.
This patch adds a systempreference and code that allows it.
To test:
1) scan a patron card or enter a surname to start checking out;
2) enter title or other keywords;
3) the circulation screen should display a warning allowing to choose between copies.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new system preference AllowTooManyOverride to control whether
a librarian can override the 'Too many checked out' message which is
currently always overridable.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Attempt to check out 1 more item to a patron than the max issues
4) You should be allowed to override by default ( current behavior )
5) Set AllowTooManyOverride to "Don't allow"
6) Repeat step 3
7) You should be blocked from being able to issue the item
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new system preference is activated by default, which mean there
will be no change in behaviour on update.
The system preference is correctly added to the database and .pref
files.
Test plan and QA script passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some vendors ship materials from the same invoice in multiple packages.
In those cases, it would be good to notify the librarian when they enter
a duplicate invoice number, so that they can continue receiving on the
previously-created invoice, rather than creating an invoice with a
duplicate number.
To test:
1) Apply patch and run database update.
2) Make sure that you have created at least one invoice on
acqui/parcels.pl and take note of the invoice number.
3) Try to create an invoice with the same invoice number.
4) Note that without changing your configuration this works exactly
the same as before.
5) Turn on the AcqWarnOnDuplicateInvoice system preference.
6) Try to create a new invoice with the same number as the one you
noted earlier.
7) Make sure you get a warning about a duplicate invoice.
8) Choose to receive on the existing invoice.
9) Confirm that you are receiving on said existing invoice.
10) Start the receiving process over, and this time choose "Create new
invoice anyway."
11) Confirm that you are now receiving on a new invoice.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
I have followed the test plan, but also checked some more things:
- Checking the duplicate check works when you have the entered
invoice number in your database multiple times already.
- Checking that no duplicate message is shown if you enter the
invoice number and it's already been used for an invoice from
another vendor.
Looks all good. I think the only thing we could argue about here
is if this could be activated by default for new installations.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As QA followup on report 9722. Built on top of another followup report 10321.
Test plan:
Run the db revision included in the other patch.
Enable OpacHoldNotes. Check that you can add a hold note on opac-reserve.
Do you see it on opac-user and in staff on catalog detail of that biblio?
Do a grep on ShowHoldNotes on the Koha code: grep -i ignores case. You should
find three occurrences only in updatedatabase.pl (the old dbrev and this dbrev
renaming them). These are fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Other system preferences which require entry of database column names
include a link to the scheme for reference. The UniqueItemFields should
do the same. This patch rewords the preference description to
incorporate a link.
To test, open the acquisitions tab in system preferences and confirm
that the UniqueItemFields description looks correct and links to the
right page in the schema.
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On by default.
To Test
1/ Create an overdue item, that should get fines
2/ Return the item
3/ Check the borrowers record to see if the fine has been added/updated
Apply patch
1/ Make sure preference is set to do
Repeat steps 1-3 above
2/ Switch the preference to don't
Repeat stes 1-2
3/ Check the fine hasn't been added/updated
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass, works as described.
I would categorize this a bug fix for libraries that don't want
the new changed behaviour that was introduced by recalculating
fines on return.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Allow a relative path (within theme/css) in intranetstylesheet too.
Allow a full path, local or remote with http(s), in intranetcolorstylesheet.
This restores consistency between opac and staff.
Test plan:
First: the patch with the db revision should have been applied. And also the
updatestructure step from the web installer should have been run.
Clear intranetstylesheet. Check included stylesheet with page source in browser.
Enter a full path with http or / in intranetstylesheet. Check again.
Enter a relative path (such as staff-global.css). Check again.
Clear intranetcolorstylesheet. Check if there is no reference with page source.
Enter a full path with http or / in intranetcolorstylesheet. Check reference.
Enter a relative path (such as blue.css). Check again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The option of adding a note is controlled by new pref OpacShowHoldNotes.
This development is part of a larger one (see umbrella report 9721).
Test plan:
1 Verify if new pref is disabled by default. Place a hold. You can't add a note.
2 Enable the pref. Place a hold and add a note. Check in staff if you can see
the note in Catalogue Detail/Holds tab.
3 Toggle SingleBranchmode, AllowHoldDateInFuture/OPACAllowHoldDateInFuture,
OPACShowHoldQueueDetails, or OPACItemHolds.
Check the display of columns when placing a hold from opac.
4 Place a few holds with notes from opac search results in one run (enable
DisplayMultiPlaceHold). Check results in staff again.
Remark: A few lines already refer to mandatory note reasons. This is handled
in a subsequent report. No reason to worry.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Test Plan:
1) Enable IndependantBranches
2) Apply this patch
3) Run updatedatabase.pl
4) Verify that the system preference still functions correctly
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Implements the material type icons shown in the MARC21 XSLT result list
of the OPAC for the intrant result list.
Also adds the system preference DisplayIconsXSLT as an intranet analogue
for the OPAC system preference DisplayOPACiconsXSLT and corrects the
descriptions of both preferences in the syspref editor.
To test:
0) Run database update to add new system preference
1) Activate default XSLTResultsDisplay
2) Check the new system preference DisplayIconsXSLT shows up correctly
and is activated by default. Compare descriptions between DisplayIconsXSLT
and DisplayOPACiconsXSLT.
3) Check the intranet result list for icons showing up after 'Type:' and
before the corresponding description. Detail pages should be showing
the 'Type:' as before.
4) Turn off DisplayIconsXSLT.
5) Check the line containing 'Type:', format and audience information is now
hidden from the result list.
6) Check that the 'Type:'line is also hidden from the detail page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch modifies Koha::DateUtils::output_pref to support the new system preference TimeFormat, which defines the visual format for a time as either the 24 hour format ( default ), or the 12 hour format (HH:MM AM/PM).
The patch also modifies C4::Members::IssueSlip to use output_pref rather than format_date.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Issue an item to a patron, verify the times are in 24 hour format.
4) Switch TimeFormat to the 12 hour format.
5) Revisit the patron record you issued an item to, times should now be in a 12 hour format.
6) Print a slip for this patron, you should now see the time as well as the date.
Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests after fixing the test count in t/DateUtils.t.
Fixed conflicts in syspref.sql and updatedatabase.pl.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As we have another sign-off on this now I gave it a quick
run through and it works as expected.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds support for custom plugins. At the moment the Plugins
feature supports two types of plugins, reports and tools.
Plugins are installed by uploading KPZ ( Koha Plugin Zip )
packages. A KPZ file is just a zip file containing the
perl files, template files, and any other files neccessary
to make the plugin work.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Create the directory /var/lib/koha/plugins
4) Add the lines
<pluginsdir>/var/lib/koha/plugins</pluginsdir>
<enable_plugins>1</enable_plugins>"
to your koha-conf.xml file
5) Add the line
Alias /plugin/ "/var/lib/koha/plugins/"
to your koha-httpd.conf file
6) Restart your webserver
7) Access the plugins system from the "More" pulldown
8) Upload the example plugin file provided here
9) Try it out!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes 'insecure' system preference.
Also removes remaining code that make use of
the preference. It's broken anyway.
Only remains a reference in POD of C4/Boolean.pm
To test:
1) If you like, enable 'insecure' syspref. Broken system.
WARN: be prepared to revert value in database.
2) Apply the patch
3) Run updatedatabase.pl
4) Check that Staff login proceeds as usual.
5) Check that 'insecure' syspref is no more.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove 2 occurrences of insecure (in comment only)
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In UNIMARC installations the authors have a double comma separating the subfield a and the subfield b.
Test plan:
- After applying the patch do a search and check the double comma in authors facets.
- Apply the patch
- Do a new search
- Check if authors facets as a double comma
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds the system preference FinesIncludeGracePeriod which
allows the library the choice to include the grace period when calculating
a fine ( Koha's current behavior ) or to ignore the grace period for
the purposes of fines calculation. It is set by default to preserve the
current behavior.
Signed-off-by: Srikanth Dhondi <srikanth@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Rebased March 8, 2013. Included renaming pref.
Works as advertised. Renamed the bug title and opened a new report for the
original bug.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In light of the experimental nature of the QueryParser code at this
juncture, it behooves Koha to have the option of disabling QP, at least
for the purpose of comparing results between QP-enabled and QP-disabled
searches. This patch adds a UseQueryParser syspref to do just that. In
cases where the user enables QP without having QP installed, however,
there will be no dramatic failure, and Koha will simply fall back to
using the non-QP search code.
In order to reduce the overhead added by the introduction of QueryParser,
this patch adds a C4::Context->queryparser accessor to a static
QueryParser object which is initialized the first time it is required
and then reset thereafter.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Elliott Davis <elliott@bywatersolions.com>
Fixed merge conflict in sysprefs.sql and updatedatabase.sql
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed merge conflict in sysprefs.sql und updatedatabase.pl
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The patron self registration system references a system preference
PatronSelfRegistrationAdditionalInstructions as a free text field
to add additional instructions for newly self registered patrons,
but the system preference in neither created in the database,
nor exposed via the staff interface.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Add some text to the new system preference
PatronSelfRegistrationAdditionalInstructions
4) Enable opac self registrations and complete a self registration
5) Note the additional instructions you entered appear on the
"registration complete" page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add all fine actions to action_logs via FinesLog syspref
Test Plan:
1) Enable FinesLog
2) Apply patch
3) Try all the various fine related actions possible
4) Verify that each action creates an action_logs entry
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
* Don't show the Location line if there are no copies available, since it
will inevitably be blank
* Also, don't show locations for Checked Out, Lost, Damaged, Withdrawn,
On Hold or In transit items; it doesn't really make sense, since the
items aren't actually there, and it results in repetitive listing of
the shelving location
* Added system preference to display shelving location of an item on opac
results. The system preference is called OpacItemLocation. I also moved
the call number to a new line called Location along with the shelving
location if it is enabled.
To Test:
1) Run database update script to add syspref.
2) Set OpacItemLocation to show locations or collection codes on the
opac-search page.
If it is working you should see the shelving location of the item
before the call number. Multiple home branch shelving locations
are seperated by a pipe character ( i.e. '|' ).
Based on code by Elliot Davis <tdavis@uttyler.edu>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Works as advertised.
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Working on Mozilla Persona support (browser id)
This will let a user log into Koha using browser id, if their email
address used matches the email address inside Koha.
Once an assertion is received, we simply need to find the user that
matches that email address, and create a session for them.
opac/svc/login handles this part.
The nice thing about it is, the user doesn't have to do anything, like
linking their account. As long as the email address they are using to
identify themselves in browserid is the same as the one in Koha it
will just work.
This is covered by a systempreference, to allow people to do it, and
is of course totally opt in, it works alongside normal Koha (or any
other method) of login. So only those choosing to use it, need use it
Test Plan
1/ Make sure OPACBaseURL is set correctly
2/ Switch on the Persona syspref
3/ Make a borrower (or edit one) to have the email you plan to use as
the primary email
4/ Click sign in with email, make or use a persona account
5/ Logout
6/ Check you can still login and logout the normal way
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works great.
It's not browser dependent, but tested with chrome, firefox, opera and safari.
Old an new login system works.
Minor errors, addresed in follow-up.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added for trivial string change in finalizing QA.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New syspref OPACPopupAuthorsSearch.
If it is disabled, the development has no effect.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Forget to add the system preference to the template.
Signed-off-by: Rolando Isodoro <rolando.isidoro@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New Authority system preference created UNIMARCAuthorityField100 with default value "afrey50 ba0".
AuthoritiesMarc.pm uses the system preference instead of label "afrey50 ba0".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, all tests and QA script pass.
1) Check system preference is created correctly.
2) Change pref.
3) Catalog a new authority.
4) Change framework to make 100 show in frameworks or check in the
the database, that now 100 has the new defined value.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This problem happens because there isn't a operator "phr" in the values
of callnumber and standard number search. So many results aren't the
corrects ones.
Test plan:
- Apply the patch
- In the dropbox search menu of OPAC main page header, the callnum
should have only callnum
- In OPAC advanced search the callnumber and standard number options
shouldn't have "phr"
- In staff client advanced search the callnumber and standard number
options shouldn't have "phr"
- Change OPACNumbersPreferPhrase and IntranetNumbersPreferPhrase to "use"
- The options listed before should use now the operator "phr"
- This will resolve the problems with the searches of callnumbers and
standard numbers in OPAC and staff client (spaces problems, no
results, inconsistent results, etc...)
Sponsored-by: KEEP SOLUTIONS
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I don't know how to reproduce the searching problems described in the
bug, but I can confirm that the patch works correctly to enable/disable
the use of 'phr' in the searches described in the test plan.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
System preferences work as described, switching indexes in
OPAC and staff.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the following enhanced content to the OPAC, all controlled by
separate sysprefs:
1) A "Readometer" which summarizes reviews on the OPAC detail page
2) A tab with snippets of critical reviews on the OPAC detail page
3) A computed rating on the results page
To test:
Find a book that is listed on IDreamBooks.com (you may have to make
sure that you have the first edition), and one that is not. Try
each of IDreamBooksReadometer, IDreamBooksReviews, and
IDreamBooksResults sysprefs, taking note of the content appearing (or
not) as appropriate.
Updated to add missing CSS to new theme.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased to latest master 2012-12-31
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passed-QA-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added RentalsInNoissueCharges and ManInvlsInNoissueCharges sys prefs
Created C4::Members::cwGetMemberAccountBallance()
* A wrapper for GetMemberAccountRecords that gives info on non-issue and
other charges
* Other charges are:
'Res'
'Rent' if RentalsInNoissueCharges is Mo
authorised_values MANUAL_INV if ManInvlsInNoissueCharges is No
C4::Members::GetMemberAccountRecords() changes:
* Dropped input param $date, it is not used
Use split charges in C4::Circulation::CanBookBeIssued() and
C4::Members::patronflags(). That way only fines decide whether an item
can be issued, and not other non-fine charges
Signed-off-by: Marc Veron <veron@veron.ch>
Rebased (updatedatabase.pl)
ManInvInNoissueCharges and RentalsInNoissueCharges ar both included by default (= behaviour as before)
All variants tested: Both included, none included, manual invoice included, rentals included.
Works fine, blocks/does not blok as appropirate, messages appear as expected.
[Oct 12, 2012 marcelr:] Amended for updatedatabase.pl
Signed-off-by: M. de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Patch updates the text of the SeparateHoldings and OpacSeparateHoldings
preference descriptions to be more readable.
To test, apply the patch and check the text of the preferences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Description and test plan added.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Add system preferences SCOUserCSS and SCOUserJS to define separate CSS and JavaScript for the Self Checkout Module.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Add something arbitrary to the new sysprefs SCOUserCSS and SCOUserJS ( such as TestCSS and TestJS ).
4) Load the SCO module in a browser, and view the HTML, verify the CSS and JS values in the system preferences have been included.
Signed-off-by: Marc Veron <veron@veron.ch>
I tested with an alert('hello') as JavaScript and some background-color for the CSS. Worked as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a new system preference to control the fields to not appear in the separator.
Change GetMarcNotes to use the system preference created to only appear the fields that aren't in the list,
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
FIX some indentation in C4/Biblio.pm
+FIX 1 end of parentheses in sysprefs.sql
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preference to turn on/off this feature.
By default the system allow the patron to place holds even if it is in his possession.
Script to place holds check if the system preference is off and if patron has at least one item to block holds.
Messages to say that are already in patron possession added to templates.
Method to check if patron has one issue from one record added to C4::Circulation
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This enhancement uses information from MARC field 856 to generate the appropriate HTML5 code to embed am media player for the file(s) in a tab in the OPAC and staff client detail view. This patch supports the HTML5 <audio> and <video> element. Additionally it gives basic support for the <track> element. This element is not supported very well by recent browsers. Please consider the patch working when you get working video or audio.
Rebased to Master 22.11.2012
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
When search failed, this patch gets the keyword(s) and add them
to the string entered by the user to OPACNoResultFound
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 sysprefs are SeparateHoldingsBranch and OpacSeparateHoldingsBranch
and permit to chose between home branch and holding branch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Two tabs: "<branch> holdings" / "Other holdings"
"<branch> holdings" tab contains items whose homebranch is the current branch.
"Other holdings" tab contains all other items.
If current branch is not set (connected with mysql user or not logged in
(opac)), the display is unchanged (1 tab "Holdings")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This development will add the ability for a new patron to register
himself or herself. The self-registration will attempt to match this
newly inputted data to any existing patrons and if any possible matches
are found, ask if the patron is sure he or she doesn't already have an
account at the library. A system preference may be set to prevent patron
self-registration if the system detects the possibility that the person
may already have an account.
Once the patron has registered, passing a captcha (or similar
bot-stopper), the patron will then be optionally verified a second time
via email. At this point, the patron will be able to print a temporary
library card (optional by system preference), and will be provided any
details necessary to access electronic resources (this body of text
would be a template in the slips and notices system). At the library's
choice, this new patron would either be set to a temporary patron status
(patron type set via system preference), or a fully-fledged patron
(allow patron type to be determined by age and/or other attributes).
Assuming the library uses temporary patron types for OPAC registrations,
this patron will next enter a queue and would need to physically enter
the library to verify himself and become a fully-fledged patron (most
likely by bringing in physical proof of address, etc.). The librarian
would look up the patron record and modify the patron type. If a
temporary patron has not been verified within a certain time frame
(defined by a system preference), the patron record will be deleted
from the system via a cron job.
For registered patrons, the system will allow each person to also
update his or her personal data via the OPAC. When a patron updates his
or her information, the changes will be entered into a queue to be
verified by a librarian (preventing a patron from inputting obviously
bogus data). The staff client home page will display the number of
patron records with changes awaiting approval. A librarian would then be
able to click through a list of modification requests, and approve or
deny each (with approval and denial alerts being sent to the patron via
the standard messaging system).
NEW SYSTEM PREFERENCES
* PatronSelfRegistration
* PatronSelfRegistrationDetectDuplicates
* PatronSelfRegistrationVerifyByEmail
* PatronSelfRegistrationPrintTemporaryCard
* PatronSelfRegistrationUseTemporaryStatus
* PatronSelfRegistrationExpireTemporaryAccountsDelay
NEW NOTICE
* Verify by email notice
NEW SLIP
* Temporary card slip
NEW CRON JOB
* delete_expired_opac_registrations.pl
- Deletes patrons that have not been upgraded from the temporary
status within the specified delay
* delete_unverified_opac_registrations.pl
- Deletes the unverified patrons based on the length of time specified
in the PatronSelfRegistrationExpireTemporaryAccountsDelay
The patron will register from self_registration.pl, linked off opac-main.pl if enabled. The registration page will be translatable to other languages in the same way that existing templates are.
Test Plan:
1) Enable PatronSelfRegistration
2) Set PatronSelfRegistrationExpireTemporaryAccountsDelay to a number
of days
3) Create a self-registered borrower category
4) Set PatronSelfRegistrationUseTemporaryStatus
5) Set PatronSelfRegistrationVerifyByEmail to "Don't require"
6) Go to OPAC, log out if logged in.
7) You should see the "Register here" link below the login box
8) Attempt to register yourself
9) Verify you can log in with your temporary password.
10) Set PatronSelfRegistrationVerifyByEmail to "Require"
11) Attempt another self-registration
12) Check the messages table, you should see a new message with a
verification link.
13) Copy and paste the link into a web browser to verify the registration
14) Log in with the given credentials to verify the account was created.
Test Plan - Part 2 - Borrower Modifications
1) Log in to OPAC, go to "my personal details" tab.
2) Make some modifications to your details.
3) Repeat steps 1 and 2 for two more borrowers.
4) Log in to Koha intranet with a user that can modify borrowers.
5) At the bottom of mainpage.pl, you should see:
Patrons requesting modifications: 3
6) Click the link
7) Approve one change, deny a different one, and ignore the third, then
submit.
8) Check the records, you should see the changes take affect on the
approved one, and no changes to the other two. You should also see
"Patrons requesting modifications: 1" at the bottom of mainpage.pl
now.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 7067 - OPAC Borrower Self Registration - Followup
* Rename PatronSelfRegistrationUseTemporaryStatus to PatronSelfRegistrationDefaultCategory
* Hide register link unless PatronSelfRegistrationDefaultCategory is set.
* Add invalid token page
* Add documentation and switches to cron scripts
* Add required fields check for editing exiting patrons
* Don't force require email address for existing patrons when
PatronSelfRegistrationVerifyByEmail is enabled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Right now when you return an item that was lost the patron's card is
credited with the lost fee, but not all libraries refund lost fees
and sometimes the fee is refunded after the patron has paid for it,
causing all kinds of financial issues.
Adds the syspref RefundLostItemFeeOnReturn to control whether
returning a lost item refunds the fee charged for losing that
item. Enabled by default to maintain Koha's current functionality.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Passed-QA-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds markup and JavaScript to the system preferences
interface so that the user can click "default" or "empty" to populate
an XSLT-related pref with those vaules.
To test, open system preferences for the OPAC or staff client. In
the description for an XSLT-related preference click the "default"
link to populate the field with "default." Click the "leave empty"
link to empty the field.
Revised according to Julian Maurice's suggestion for a more
generic, flexible way to implement it.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Even though the DidYouMeanFromAuthorities syspref was replaced by a "Did
You Mean?" configuration page, the syspref was showing up in the
syspref editor on the Searching tab.
Signed-off-by: Melia Meggs <melia@test.bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the "alphabet" syspref, which can hold a space separated list
of charachters, which can be expanded into browse links when needed.
To test:
- Make sure to run updatedatabase
- Check that the "alphabet" syspref was added under "I18N/L10N preferences"
- Check that browse links are displayed Home › Patrons
- Add some weird charachters like ÆØÅ to "alphabet" and check that the
browse links are still displayed ok
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Passed-QA-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Properly set the relevant NoZebra and QueryRemoveStopwords sysprefs to 0 to fix issues on upgrades.
Also removes the sysprefs from preferences/searching.pref
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The feature in bug 8525 added highlighting to the detail
pages in the opac. This patch updates the preference to
note this change.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This preference was in the code as a choice but should be a list
of fields to exclude. This patch makes that change and updates
the description to fit more with the standard set by other
preferences.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The ExportWithCsvProfile preference was on its own file
(tools.pref) when in reality it belonged on the circulation
tab. This patch removes the tools.pref file and moves the
ExportWithCsvProfile preference and updates the text
around it to make it clearer.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
There is no option to toggle the (existing) syspref OpacCloud. This patch adds one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Inserted tags manually, enabled system preference, tag subject cloud displays nicely.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The preference added in this bug is missing the word
'day(s)'. This patch adds it in.
http://bugs.koha-community.org/show_bug.cgi?id=4118
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The preference used to read 'loan period by' but it's
actually reducing the checkout period 'to' the number
of days entered in the preference. This patch changes
'by' to 'to'.
Signed-off-by: Marc Veron <veron@veron.ch>
Tiny patch, text change only, text apears as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch updates the preference question to a sentence
to follow the standard set with previous preferences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch merges the three preferences in to one sentence
to make it clear that they are all linked together and to
eliminate confusion that can come by having them as
individual preferences.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This patch changes strings only, not functionality. It will
clarify the meaning of the AgeRestrictionMarker preference.
Signed-off-by: Marc Veron <veron@veron.ch>
Better wording of preference instructions. No code echange involved.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Currently, Koha creates a default value of 2 days ago (-2) for the start date of the Holds to pull List. This system preference allows users to specify their own default start date for this list, since users might not want to have to manually change the date all the time when they already know the set date period they want to view.
The system preference value is specified as a positive integer, which is then passed as a negative integer in the handler script. This saves users from having to include a qualifer to the sys pref value.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a system preference BlockReturnOfWithdrawnItems to control
whether or not Koha should allow a withdrawn item to be returned
or not.
Also fixes the behavior where Koha will attempt to use a withdrawn
item to fill a hold.
Test Plan:
1) Set BlockReturnOfWithdrawnItems to "Block" ( this is the default )
2) Check an item out to a patron
3) Mark item as withdrawn
4) Attempt to return the item, you should still see the item on the
borrower's record
5) Set BlockReturnOfWithdrawnItems to "Don't Block"
6) Attempt to return the item, you should see the item is no longer
on the borrower's record.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This commit adds support for displaying authority hierarchies for all
flavours of MARC, not just UNIMARC. Display now uses the jQuery
jstree plugin, selected with the help of Owen Leonard, resulting in a
much faster experience for users.
Be aware that the jstree file uses tabs rather than 4-space indentation,
which I left as-is so as to make it easier to integrate upstream
releases in the future.
To test:
1) Enable the AuthDisplayHierarchy syspref
2) Create authority records with a hierarchy of see also fields
(in MARC21/NORMARC, you'll be using 5xx fields for this, with a
subfield $w=g for broader terms and subfield $w=h for narrower
terms)
3) View the authorities in the OPAC, noting the hierarchical view at
the top of the page.
This initial patch does not create bidirection linkages from
unidirectional links in MARC21 authorities. This means that when moving
up the authority hierarchy, lower levels will disappear. This is
intentional, as the first patch is intended merely to ensure that
AuthDisplayHierarchy functions the same for all marcflavours. A future
patch will add a cron job to generate the bidirectional linkages, once
we are sure that the hierarchy functionality for UNIMARC and
MARC21/NORMARC coexists peaceably.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Resolved conflicts in updatedatabase.pl, sysprefs.sql and in one of
the CSS files.
Test plan:
1) Run t/AuthoritiesMarc.t
New tests complete without any errors.
2) Make sure updatedatabase works correctly.
Update works nicely, new system preference is also added to syspref.sql
3) Make sure new terms are translatable.
Created new po files for de-DE and checked for new terms.
All translations appear correctly.
4) Make sure everything works with AuthDisplayHieararchy OFF
- Add authority
- Edit authority
- Delete authority
5) Test feature with AuthDisplayHieararchy ON
- Add authority
- Edit authority
- Delete authority
6) Add a couple of hierarchically linked authorities
Note: links have to be created in both directions
Example:
151 $aGermany
551 $a Baden-Württemberg $w h
151 $aBaden-Württemberg
551 $a Konstanz $w h
551 $a Germany $w g
151 $aKonstanz
551 $a Baden-Württemberg $w g
551 $a Fürstenberg $w h
551 $a Paradies $w h
151 $a Fürstenberg
551 $a Konstanz $w g
151 $a Paradies
551 $a Konstanz $w g
Tree shows up nicely above the authority record
- in staff
- in OPAC
- on the normal view tab
- on the MARC view tab
7) Checking the logs for warnings
- no Javascript errors or warnings
- no warnings or errors in log files
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Rebase and merge based on Mark Gavillet's patch to reduce
the loan period given to items on renewal when they are
in high demand for holds
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch adds the following system preferences:
* OpacMainUserBlockMobile - alternate content for the MainUserBlock for
mobile
* OPACMobileUserCSS - custom CSS for mobile views only
* OpacShowFiltersPulldownMobile - whether or not to show the index
dropdown on the mobile view
* OpacShowLibrariesPulldownMobile - whether or not to show the library
dropdown on the mobile view
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
In order to solve the issue of IndependantBranches being incompatible with HomeOrHoldingBranchReturn,
this patch changes the mechanism by which the question "can I return this material here?" is answered. Before,
the conditions were "if IndependantBranches is on, and this branch isn't HomeOrHoldingBranchReturn for the item,
then no, otherwise yes". Now, the question is answered by consulting CanBookBeReturned (new subroutine)
New system preference: AllowReturnToBranch
Possible values:
- anywhere (default for new installs, and for existing systems with IndependantBranches turned off)
- homebranch
- holdingbranch (which is also the issuing branch in all normal circumstances)
- homeorholdingbranch (default for existing systems with IndependantBranches turned on)
New subroutine: CanBookBeReturned
Input: $item hash (from GetItems), and $branchcode
Output: 0 or 1 to indicate "allowed" or not, and an optional message if not allowed. Message is the 'correct' branchcode
to return the material to
To Test:
1. Install patch and new syspref
2. Check that default value of the preference:
- if IndependantBranches was OFF at install time, should be 'anywhere'
- if IndependantBranches was ON at install time, should be 'homeorholdingbranch'
Case: 'anywhere'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should be successful
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B and Library C
Case: 'homebranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to Library A should be successful
4. Repeat step 3 with Library B and Library C. Both should FAIL (returning message to return at A)
Case: 'holdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should FAIL (returning message to return at B)
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at B)
Case: 'homeorholdingbranch'
1. Checkout a Library A book at Library A. Return at Library A should be successful
2. Repeat step 1, returning to Library B. Return should FAIL (returning message to return at A)
3. Checkout a Library A book at Library B. Return to A should be successful
4. Repeat step 3 with Library B. Return should be successful
5. Repeat step 3 with Library C. Return should FAIL (returning message to return at A)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Small string fix to remove repeated word.
Signed-off-by: Marc Veron <veron@veron.ch>
Tiny typo fix
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
In the circulation page, you can now export (as csv or iso2709) a list
of items which are currently checked out by a borrower.
3 export types:
- iso2709 with items: Export the items list in iso2709 format with item
informations.
- iso2709 without items: Export the items list in iso2709 format without
item informations.
- CSV: Export the items list based on a csv profil.
2 new system preferences:
- DontExportFields: a list of fields not to be export
- CsvProfileForExport: The Csv profile name used for the csv export
Test plan:
- Fill the CsvProfileForExport syspref
- go on the borrower circulation page containing checkouts
- Select one or more items and export them to the 3 different formats.
- check if the result file is what you expected
- Test there is no regression with the export authority
- Test there is no regression using tools/export.pl with the command
line interface
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds the Koha::Indexer::RecordNormalizer and
Koha::Indexer::MARC::RecordNormalizer::EmbedSeeFromHeadings packages
to enable the inclusion of alternate forms of headings in bibliographic
searches. When the new syspref IncludeSeeFromInSearches is turned on
(default is off) rebuild_zebra.pl will insert see from headings from
authority records into bibliographic records when indexing, so that a
search on an obsolete term will turn up relevant records.
To test:
1) Enable IncludeSeeFromInSearches
2) Add a heading that has an alternate form to a record (for example,
"Cooking" has the alternate form "Cookery," if you have authority
records from LC)
3) Index the zebraqueue (or reindex if you haven't indexed your system
yet)
4) Confirm that if you search for "Cookery" you get the record you
just modified
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 5 August 2012
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on master 11 September 2012
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also checked:
- Verified database update works correctly
- Checked system preference and its description
- Checked staff/opac detail pages with feature on/off
- Checked staff/opac search facets
- Downloaded and tested records in various formats
- Tried different searches for 'see from' entries of authorities
- Ran all unit tests
No problems found.
One of the ideas behind authority records is that users who search for
one term should have related terms (according to the authority file)
suggested to them. At the moment, Koha doesn't do that. Adding an
authority searching step to regular searches and displaying any
suggestions in a "Did you mean" bar at the top of the results would be
very useful.
This commit adds a Koha::SuggestionEngine class which is in charge of
getting suggestions from individual suggestion engine plugins, which
much be in the Koha::SuggestionEngine::Plugin::* namespace, and extend
Koha::SuggestionEngine::Base. Suggestions are loaded asynchronously
using AJAX, and a link to a page with suggestions is provided for users
with Javascript turned off.
The AuthorityFile suggestion engine plugin looks up the specified search
terms in the authority file and then suggests searches for records using
matching authorities.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased 2 August 2012 and incorporated QA feedback
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan:
- Verified database update added system preference correctly,
pref defaults to OFF
- Verified search results and detail pages in OPAC and staff
still worked the same as before
* for no results
* with results
- Activated system preference and tested various searches
* Searches from simple search
* Searches from advanced search
* Search links in records
- Deactivated Javascript - verified fallback works correctly
Notes:
- Suggested terms can include autorities with no linked records.
- When combining more than one search option using advanced search
this results in "no suggestions" more often. Feature works best
from simple search.
Overall great feature making use of authorities in a user friendly way!
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased on latest master 2012-09-10
Signed-off-by: wajasu <matted-34813@mypacks.net>
Create transport_cost table, added UseTransportCostMatrix syspref.
transport_cost table contains branch to branch transfer
costs. These are used for filling inter-branch hold transfers.
Moved GetHoldsQueueItems() from .pl to HoldsQueue.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
New version implementing Paul's advice.
See Wiki http://wiki.koha-community.org/wiki/Age_restrictiotion
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
fix updatedatabase.pl
New fix updatedatabase.pl to apply to current master by Marc Veron veron@veron.ch
...and fixed missing curly bracket after merging updatedatabase.pl
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
