This removes the LEEME.Debian README file from the docs
directory. We don't even have an English README here as
we usually refer to the wiki for installation instructions.
It makes sense to remove it from the codebase.
To test:
* Verify that the file is removed
* Verify that all references to the file have been removed as well
Example: git grep LEEME
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit a18e4d0e62)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
to test..
1/ install koha-common
$ sudo apt install koha-common
2/ start memcached, check PID
$ sudo service memcached start
$ sudo systemctl status memcached | grep PID
Main PID: 52851 (memcached)
3/ build and install new koha-common package (will trigger a restart)
$ sudo apt install ./koha-common-git+deadbeef.deb
5/ check that memcache is started, and has new PID (52900)
$ sudo systemctl status memcached | grep PID
Main PID: 52900 (memcached)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I think instead of a plain on/off switch we should use it in combination
with the plugin_repo's and set it to restrict to only those repos' (i.e.
disable uploads entirely if no repo's are listed, or just allow those
repo's when there are).
This patch achieves that, but only if plugins are installed via the
plugin browser method. We disable all direct upload avenues, so install
is blocked for other cases.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enables enable_plugin_browser_upload by default,
since the current behaviour for Koha is to enable browser upload
when enable_plugins is 1.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a enable_plugin_browser_upload flag to koha-conf.xml, which
controls whether or not Koha intranet users can upload Koha plugins via
their browser. Like "enable_plugins", it defaults to 0 for new installs.
This is useful when you want to provide Koha intranet users with plugins
that are pre-installed by administrators (by CLI) or restricting them
to plugins from a Github repo. See the following for more information:
Bug 23975 - Add ability to search and install plugins from GitHub
Bug 23191 - Administrators should be able to install plugins from the command line
To test:
1) Apply the full patchset
2) Confirm <enable_plugins>1</enable_plugins> is present in koha-conf.xml
3) Add <plugins_restricted>1</plugins_restricted> to koha-conf.xml
4) Ensure that the <plugin_repos> block is not commented and contains at
least one trusted organisation in koha-conf.xml
If needed get it from: debian/templates/koha-conf-site.xml.in
5) Run restart_all (in koha-testing-docker)
6) Go to /cgi-bin/koha/plugins/plugins-home.pl and note that you don't see
an option to upload plugins
7) You should however see a search option and upon search you should have
results returned from the chosen trusted organisations listed in the
<plugin_repos> block mentioned above.
8) Clicking install on one of the results should work as expected and install
the plugin.
9) Go directly to /cgi-bin/koha/plugins/plugins-upload.pl and note that it says
"Plugin upload is restricted to only those plugins listed by your server
administrator" and gives instructions on how to enable unrestricted browser
upload.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In Debian 12/Bookworm:
root@kohadevbox:koha$ koha-shell kohadev
This account is currently not available.
This is because /etc/passwd has /usr/sbin/nologin as shell, which is coming from the --disabled-login param we passed to adduser in koha-create.
Looks like a bug has been fixed in adduser, because we didn't have this behavior in bullseye.
Context:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=625758#72
"""
- change and document (adduser(8)) that --disabled-password will behave
like --disabled-login and additionally set the shell to
/usr/sbin/nologin.
"""
427ade7d91
Test plan:
Confirm the above and that the change makes sense.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I think the correct behavior for this script should be that koha-foreach
will return 0 (success) if all the commands it tried to run succeeded, but
1 (failure) if any of the commands failed.
To test:
1. $ koha-create --create-db test
2. $ vi test.sh
if [ $USER = 'kohadev-koha' ]; then
echo "FAILED";
exit 1;
else
echo "SUCCESS";
exit 0;
fi
3. $ debian/scripts/koha-foreach sh test.sh
FAILED
kohadev: 1 status returned by "sh test.sh"
SUCCESS
4. $ echo $?
5. Note that the exit status is 0 (success)
6. Apply patch
7. $ debian/scripts/koha-foreach sh test.sh
FAILED
kohadev: 1 status returned by "sh test.sh"
SUCCESS
8. $ echo $?
9. Note that the exit status is 1 (failure)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change adds a mfa_range configuration option for TOTP
to koha-conf.xml, and overrides the "verify" method from
Auth::GoogleAuth in order to provide a new default for "range"
Test plan:
0. Apply the patch
1. koha-plack --restart kohadev
2. Go to
http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=TwoFactorAuthentication
3. Change the syspref to "Enable"
4. Go to
http://localhost:8081/cgi-bin/koha/members/moremember.pl?borrowernumber=51
5. Click "More" and "Manage two-factor authentication"
6. Register using an app
7. In an Incognito window, go to
http://localhost:8081/cgi-bin/koha/mainpage.pl
8. Sign in with the "koha" user
9. Note down a code from your Authenticator app
10. Wait until after 60 seconds and try it
11. Note it says "Invalid two-factor code"
12. Try a new code from the app
13. Note that it works
14. Add <mfa_range>10</mfa_range> to /etc/koha/sites/kohadev/koha-conf.xml
15. Clear memcached and koha-plack --restart kohadev
16. Sign in with the "koha" user
17. Note down a code from your Authenticator app
18. Wait 4 minutes and then try it
19. Note that it works
20. Disable your two-factor authentication and click to re-enable it
21. Use a code older than 60 seconds when registering for the two
factor authentication
22. Note that the code works
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
from debian and /etc koha-conf.xml files
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The koha-z3950-responder command does not have a man page.
This patch fixes that.
Test plan:
1) Apply this patch.
2) Run the following command to generate the new man page:
xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl-ns/manpages/docbook.xsl debian/docs/koha-z3950-responder.xml
3) View the generated man page with `man -l koha-z3950-responder.8`
(KTD users may need to `apt-get install man-db` first as
that package provides tools for reading manual pages)
4) Make sure this unit test passes:
prove -v xt/verify-debian-docbook.t
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the default SSLProtocol for the Let's Encrypt
HTTPS template, so that it enables in use versions of TLS while
disabling the deprecated versions of TLS.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
to test...
1/ run command
$ sudo koha-passwd dev1
Password for dev1: CraZyPa$$WoRD!!
Press enter to clear the screen...
^C
2/ apply patch
3/ run command again, note 'username' section
$ sudo koha-passwd dev1
Username for dev1: koha_dev1 <<<<<<<<<<<<
Password for dev1: CraZyPa$$WoRD!!
Press enter to clear the screen...
^C
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Solutions inLibro started formating its repository to be found by Bug
23975. This patch adds it to the default list in the config template.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Finally! No more occurrences of this module, we can happily remove it!
Test plan:
git grep is your friend
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The last occurrence of C4::BackgroundJob is in process_koc.pl that is used to upload a file.
Added by bug 2608 (15 years ago), I think it does not longer make sense as networks are faster, and we should not expect big koc files to be uploaded.
If there are complains we will move it to Koha::BackgroundJob.
Test plan:
Upload a koc file, enqueue the operations and confirm that everything is
working correctly
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
to test:
1/ install pkg, reboot, note service is not 'active'
2/ add patch, build package
3/ install pkg, reboot, note service is 'active' :)
root@deb11:/etc# systemctl status koha-common
* koha-common.service - Start required services for each Koha instance
Loaded: loaded (/etc/init.d/koha-common; enabled; vendor preset: enabled) <<<<
Active: active (exited) since Thu 2023-06-01 12:45:08 UTC; 13min ago
Tasks: 0 (limit: 2244)
Memory: 0B
CPU: 0
CGroup: /system.slice/koha-common.service
Jun 01 12:45:08 deb11 systemd[1]: Starting Start required services for each Koha instance...
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
to test
- install current package
- note following $message on install
'Failed to enable unit: Unit /run/systemd/generator.late/koha-common.service is transient or generated.'
- apply patch, build package, install new package
- note $message is gone! :)
- test koha-common.service
# systemctl start koha-common
# systemctl status koha-common | grep running
Active: active (running) since Sun 2023-04-02 00:27:31 NZDT <<<
# systemctl stop koha-common
# systemctl status koha-common | grep dead
Active: inactive (dead) since Sun 2023-04-02 00:25:34 NZDT <<<
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prior to Koha 22.05, the SIP2 item information message had a side affect of updating the datelastseen field for items. This bug has been fixed, but was being utilized by inventory tools that used SIP2. We should bring back this affect and formalize it as an optional SIP2 config account setting.
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/SIP/Message.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
No more mention of verbose.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an "exit 0" to the end of koha-foreach, so that it
returns a successful exit code if it reaches the bottom of the script
without errors.
Test plan:
0) `koha-foreach echo`
1) `echo $?`
2) Note that the exit status is 1
3) Apply patch
4) `./debian/scripts/koha-foreach echo`
5) `echo $?`
6) Note that the exit status is 0
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
to test...
- build master packages, observe failure :(
debian/build-git-snapshot -d -v 22.12.00-24~git1 -D dev -b base_22.12.00+deb10 --noautoversion
"/usr/bin/perl" build-resources.PL
yarn install v1.22.19
warning You don't appear to have an internet connection. Try the --offline flag to use the cache for registry queries.
- apply patch
- build master packages, observe success :)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
We already tested it. Just look at changes in this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the default partner category used by the partner_code config to be in line with sample data in sample_patrons.yml
Preparation:
Apply patch
Enable ILLModule sys pref
Install an ILL backend (e.g. FreeForm)
Add this change to your koha-conf.xml
Flush, restart.
Search for patron of category inter-library loan and assign a primary e-mail address to it
Test plan:
Create an ILL request and click 'place request with partners'
Verify that the 'select partner libraries' has the correct patron of IL category
Run tests and ensure they pass:
prove t/db_dependent/Illrequest/Config.t
prove t/Koha/Config.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This change prevents debhelper from renaming history.txt to changelog,
since that renaming was breaking the Timeline feature in Koha.
Another option would've been to rename history.txt to something else
but that filename is already embedded in Koha and the Koha release
tools, so this seems the safer option.
Test plan:
0. Apply patch
1. Build Debian package
2. Confirm that /usr/share/doc/koha-common/history.txt is created
and /usr/share/doc/koha-common/changelog.gz is not created
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes the restart action in koha-common to continue with starting
services even if the last service cannot be stopped (because it may not
be running)
This needs a larger fix, to ensure all stopped services return a
warning, for now 'do_stop' simply returns the last success/failure
To test:
1 - Apply patch
2 - reset_all
3 - sudo koha-es-indexer --stop kohadev
4 - restart_all
5 - You are notified that ES indexer was not running
6 - You are notified that soem services could not be stopped
7 - The services are started
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 33108: (follow-up) Fix typo
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now background_jobs_worker.pl only processes jobs in serial. It would make sense to handle jobs in parallel up to a user definable limit.
Test Plan:
1) Apply this patch
2) Stop background_jobs_worker.pl
3) Generate some background jobs by editing records, placing holds, etc
4) Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5) Run background_jobs_worker.pl with parameter -m 3 or some other
number of max processes
6) Note the multiple forked processes in the ps output
Test notes - also tested the following on KTD:
1. Stop background_jobs_worker.pl
2. Edit /etc/koha/sites/kohadev/koha-conf.xml - set max_processes to 10
3. Generate some background jobs
4. Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5. Restart all
6. Confirm multiple forked processes in the ps output
Both methods work as expected and generate multiple forked processes
based on the value set for max processes.
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See also bug 32612.
The output option includes the stdout.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On bug 32594 we are adding a new worker, dedicated to Elastic indexing.
We should have a common place for workers, and we agreed on misc/workers
To test:
1 - Apply patch
2 - reset_all in koha testing docker
3 - ps aux | grep background
4 - Confirm the workers are running, and running in the new directory
5 - Perform a batch item modification
6 - Ensure the job is processed by the worker
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
this patch adds 2 files that stops dpkg-source from including ./node_modules dir into koha-common.deb package
to test...
- build a package, note failure
- apply patch
- build a package, note success
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It is not used; overruled by daemon's --output option.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply patch
2 - vim /etc/koha/sites/kohadev/log4perl.conf, Add lines below:
log4perl.logger.worker = WARN, WORKER
log4perl.appender.WORKER=Log::Log4perl::Appender::Screen
log4perl.appender.WORKER.stderr=1
log4perl.appender.WORKER.mode=append
log4perl.appender.WORKER.layout=PatternLayout
log4perl.appender.WORKER.layout.ConversionPattern=[%d] [%p] %m %l%n
log4perl.appender.WORKER.utf8=1
3 - Restart all
4 - Edit misc/background_jobs_worker.pl
- my $job = Koha::BackgroundJobs->find($args->{job_id});
+ my $job;# = Koha::BackgroundJobs->find($args->{job_id});
5 - In another terminal: tail -f /var/log/koha/kohadev/koha-worker-error.log
6 - Force enqueue a job (that won't be found because of #4
perl -e 'use Koha::BackgroundJob::BatchUpdateItem; my $bg = Koha::BackgroundJob::BatchUpdateItem->new(); $bg->enqueue({ record_ids=>['888888']});'
7 - Note error in log like:
[2023/01/11 19:26:10] [WARN] No job found for id=2983 main:: /kohadevbox/koha/misc/background_jobs_worker.pl (111)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
As far as I can tell, we are no longer using CGI::Session::Serialize::YAML or YAML::Syck, but they are still marked dependencies for the Debian package.
Signed-off-by: Danyon Sewell <danyonsewell@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is going to be awesome!
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This followup moves the configuration to the z3950 etc file, either the
default and or the custom file is used as per the existing script code.
In addition, the options and be set using an environment variable named Z3950_ADDITIONAL_OPTS.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The z39.50 responder has a number of command line options that are not
accessible if using the debian scripts to control it. We should be able
to set those options in the koha conf file to be passed to the script
itself.
Test Plan:
1) Apply this patch
2) Copy your kohaclone's koha-z3950-responder to /usr/sbin/koha-z3950-responder if necessary
3) Add "<z3950_responder_options>--add-item-status k</z3950_responder_options>" inside your <config> block in your koha-conf.xml file
4) Use koha-z3950-responder to start/restart the z39.50 responder, note the item status is now in subfield k!
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
