When Koha charges for holds, a message with the fee is
shown before the patron places the hold. The amount needs
to be formatted according to CurrencyFormat system preference.
To test:
- Add a hold fee to your patron category
- Log into the OPAC
- Search for a record to place a hold on
- Click Place hold
- Verify there is a note showing about the hold fee
- Toggle CurrencyFormat and HoldFeeMode and verify
that the formatting is always correct
Signed-off-by: Jack Kelliher <jke0429@stacmail.net>
Signed-off-by: Mikael Olangcay Brisebois <mikael.olangcay-brisebois@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also fully qualifies some subroutine calls that fail for reasons unkown.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes an issue where patron is not allowed to place a hold in OPAC
while their home library is not a pickup library.
Instead, they should be presented with a list of other available pickup locations.
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch enables the checks for transfer limits for given biblionumber in
OPAC when patron proceeds to place a hold. In case none of the items of that
biblio can be transferred to a library, that library will not be included in
the list of pickup locations.
To test:
1. Make sure you meet the following requirements:
1.1: You are able to make holds in OPAC
1.2: System preference UseBranchTransferLimits set to "Enforce"
1.3: System preference BranchTransferLimitsType set to "item type"
(for the sake of simplicity of this test plan, but you may also
set it to "collection code" and deal with ccodes instead)
1.4: System preference item-level_itypes set to "specific item"
1.5: You have the default libraries and item types, otherwise replace
the branchcodes and itemtypes in this test plan with your own
2. Make sure 'Fairfield' in cgi-bin/koha/admin/branches.pl has not disabled
its ability to act as a "Pickup location"
3. Have a biblio with exactly one item of item-level itemtype 'BK'
4. Set item holdingbranch as 'CPL'
5. Go to cgi-bin/koha/admin/branch_transfer_limits.pl (keep this page open in
a second tab for faster testing)
6. Select library 'Centerville'
7. Uncheck the checkbox 'FFL - Fairfield' and click Save
8. Go to OPAC and find your biblio, and start placing a hold on it
9. Click at the list of "Pick up location"s.
10. Observe that it is missing 'Fairfield'
11. Go back to cgi-bin/koha/admin/branch_transfer_limits.pl
12. Repeat step 6 and this time, check the checkbox 'FFL - Fairfield'
13. Refresh the page you arrived at step 8
14. Observe that it now includes 'Fairfield'
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I compared the template logic to the MARC detail page in staff.
We use $raw there instead of html, which will also make notes and other
fields with HTML in them display correctly. I am proposing to use the
$raw filter in OPAC as well.
To test:
- Go to the OPAC
- Search for a record with items
- Switch to the MARC view
- Verify empty cells show (html entity for space)
- Apply patch
- Repeat test
- Verify empty table cells now show as empty
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 14716 added a call to encode-uri() and namespace str. This
namespace declaration is sometimes missing in UNIMARC default XSLT
files.
This patch adds namespace declaration also where encode-uri is not used
because it may be used in the future. And those files are the base for
home made custom files.
Test plan :
1) Use a UNIMARC DB
2) Use default in all XSLT sysprefs
3) Apply patch
4) Perform a search on OPAC
5) Check display is OK
6) Click on a record for detail page
7) Check display is OK
8) Perform a search on staff interface
9) Check display is OK
10) Click on a record for detail page
11) Check display is OK
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In SCO Module there is no difference on how new checkouts and renewals are shown from previous ones. This commit is done to address that issue.
How to test:
1. Go to /cgi-bin/koha/sco/sco-main.pl and login.
2. Checkout a new item.
3. In checkout's table new checkouts should be easily identifiable.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 13618 took care of the KohaDates output but not if it is called
with a parameter (eg. [% var | $KohaDates with_hours => 1 %]).
We could avoid unnecessary processing by removing the extra html filter.
Patch generated with the following command:
% perl -p -i -e 's/KohaDates([^%\|]*)\s?\|\s?html\s?/KohaDates $1/g' **/*.inc **/*.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is already escaped correctly in
C4::Auth_with_cas::_url_with_get_params using URI::Escape::uri_escape
Note that shibbolethLoginUrl is not and must be url escaped in template
("be consistent, they said")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We must not escape query_cgi and limit_cgi template-side, they are already
escape properly from build_query_compat using uri_escape_utf8.
To fix further problems we should replace all occurrences to make things
clear (I decided to keep the html filter so far, which did not hurt, but uri or url do)
Same patch as the following commit will be provided
commit 2fc599c089
Bug 21526: Fix search result pages (url vs uri vs raw)
query_cgi is uri_escaped from the pl, so we should displayed as raw
Test plan:
Use wide characters ❤
Search, filter, facets, search history, rss (both interfaces)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
As per comment #3, this patch changes the order for all
the filters found with the recommended git grep.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
----------
1) start your kohadevbox
2) cd kohaclone
3) git checkout -b bug_21947 origin/master
4) git bz apply 21947
5) reset_all
6) log in to staff client and add a 500$a with lots
of blank lines between strings with some HTML.
7) look at the opac record Title notes tab.
-- does it have <br>-mess? Should not.
8) repeat steps 5-7 on master, and you'll see
a <br>-mess.
9) run qa test tools
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
0 - Apply patch
1 - Create a library group enabled for opac search limits and add some
libraries
2 - Check the DB (or advanced search dropdown) to get the id of the
group (using 7 as example below)
3 - Add to apache configuration (OPAC virtualhost)
SetEnv OPAC_SEARCH_LIMIT branch:multibranchlimit-7
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT
branch:multibranchlimit-7"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
4 - Ensure OpacAddMastheadLibraryPulldown is disabled
5 - Restart all the things
6 - Visit the opac
7 - Perform a search, confirm it is scoped to the branches in the group
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We need to adjust a few query_cgi | uri filters here too.
Note that sort_by should be filtered by uri, not url.
Similar change on staff side.
Test plan:
Toggle Show all items/Limit available items.
Check: git grep -l "query_cgi | uri"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We need to replace the uri filter on query_cgi to make some URLs work.
Test plan:
Check if the links on user page, search history work for biblio and auth
in current and previous release.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
query_cgi is uri_escaped from the pl, so we should displayed as raw
Test plan:
Use wide characters ❤
Search, filter, facets, search history, rss (both interfaces)
Please test deeply!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It is not totally happy because of the template file used in tests.
It has line breaks inside TT directives and QA test script complains
because line breaks in TT directives confuse the current translatable
strings extractor.
However this patchset (along with bug 20988) will hopefully make the
current extractor obsolete and thus make the 'no-line-breaks' rule
useless
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Locale::Maketext does not allow correct handling of plural translation
for languages that have more than one plural forms.
Locale::Messages does.
So Koha::I18N is now a wrapper around Locale::Messages, just like
Locale::TextDomain, and export the same symbols as Locale::TextDomain.
You can refer to documentation of Locale::TextDomain to know how to use
exported subroutines.
Example usage:
__("Hi")
__x("Hi {name}", name => 'Bob')
__n("item", "items", $num_items)
__nx("one item", "{count} items", $num_items, count => $num_items)
__p("Bibliographic record", "item")
This patch also brings Koha::I18N power to Template::Toolkit templates
by adding a TT plugin.
This plugin can be used like this:
[%# USE the plugin and define some macros %]
[% PROCESS 'i18n.inc' %]
[%# tn is the equivalent of __n %]
[%# macro names can't start with underscore, t is for "translate" %]
[% tn('item', 'items', num_items) %]
Extraction of strings from templates is a bit complicated and use
Template::Parser and PPI. Template is compiled into Perl code and then
analyzed by PPI. It is slow, but should be correct even with complex
constructions.
Remove dependency to Locale::Maketext and Locale::Maketext::Lexicon
Add dependency to Locale::Messages and PPI
Test plan for translation in Perl code:
1. Open a .pl script or .pm module with your favorite text editor
2. Add 'use Koha::I18N;' in the beginning of file
3. Use one of the subroutines exported by Koha::I18N and be sure to have
a way to visualize the result (pass result to the template for
example, or simply warn and watch the log file)
4. cd misc/translator && ./translate update fr-FR # try other languages
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
You may need to change the "Plural-Forms" header. See
https://localization-guide.readthedocs.org/en/latest/l10n/pluralforms.html
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is correct
8. prove t/Koha/I18N.t
Test plan for translation in templates:
1. Open a template file (.tt or .inc) with your favorite text editor
2. Add the PROCESS directive mentioned above in the beginning of file
3. Use one of the t* macros defined in i18n.inc. They are used like
their "__" equivalent, with one difference: the 'x' variants take a
hashref instead of a hash as last parameter
4. cd misc/translator && ./translate update fr-FR
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is
correct
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch was generated using codespell
Test plan:
Read through changes and confirm they make sense
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21706
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan (having Koha working with Elasticsearch):
- apply this patch,
- try searches with and without weight defined on search fields
https://bugs.koha-community.org/show_bug.cgi?id=20262
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It would be nice if the callnumber portion of the callnumber + label was in a span,
and it also makes sense to wrap the entire callnumber string in a span as well.
This was started on bug 21340 but I have found more callnumbers in the search results that need spans.
Test Plan:
1) Apply this patch
2) Search for something in the OAPC with multiple results
3) View the HTML source
4) Note the new spans around the callnumbers, like: <span class="CallNumber"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes two corrections to templates: One to correct the case
of a variable, an error which I introduced when adding html filters.
The other removes a redundant image tag from the recent comments
template.
To test, apply the patch and log in to the OPAC as a user with
checkouts. Cover images on the "your summar" page should appear
correctly.
View the "recent comments" page and confirm that images still appear
correctly.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and fix alignment of cover on Staff detail page.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds two new CSS classes specific to Adlibris covers.
Sponsored-By: Halland County Library
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Changes to OPAC templates.
Depends on new CSS clases defined in separate patch.
Test plan:
To test this particular patch (intranet templates) you need:
* The syspref patch applied
* The intranet CSS patch applied
To test:
* Apply this patch
* Enable covers (if not done already)
* Go to staff interface, log in as a priviliged user.
* Select "More" -> "Administration" ->
"Global system preferences" -> "Enhanced content".
* Set ""AdlibrisCoversEnabled" to "Show" under "Adlibris".
* Save changes
* Add a book with a known cover/ISBN (if none exists)
* Set MARC field 020 a,
"INTERNATIONAL STANDARD BOOK NUMBER" to: 9780451524935
* Set MARC field 245 a, "Title" to: 1984
* Save changes
* Test opac-results.tt
* Search library catalog from OPAC for "1984".
* You should be sent to:
http://127.0.1.1/cgi-bin/koha/opac-search.pl?idx=&q=1984
* Cover image should be shown to the right of each title
with CSS class: "adlibris-cover"
* Test opac-detail.tt
(continued from previous test's location)
* Click on the title with cover (1984, ISBN: 9780451524935)
* Cover should be displayed to the left in full size.
* If clicked, should link to the full-size image.
Test opac-results-grouped.tt
* This template is only used if an external "grouping" server is
setup and the syspref "OPACGroupResults" is set to "Use".
* Personally I did not test this, b/c: terminally lazy
* Test opac-showreviews.tt
* Could not find any links to this location, manually enter it:
http://127.0.1.1/cgi-bin/koha/opac-showreviews.pl
* Image should be shown to the right in full size.
* If clicked it should take you to the detail view with the
comments tab opened.
* Test opac-showreviews-rss.tt
* Click on the RSS icon from previous test's start location.
URL should be:
http://127.0.1.1/cgi-bin/koha/opac-showreviews.pl?format=rss
* An image tag linking to the full-size image without any
styling class should be present.
* Test opac-user.tt
* Click on your username to open:
http://127.0.1.1/cgi-bin/koha/opac-user.pl
* Covers should be shown for checked out items with
CSS class: adlibris-cover
* When clicked the destination should be the same as
clicking the title column entry: opac-details.pl
* Test opac-opensearch.tt
* Click on "Advanced search" and enter "1984" then press "Search"
* This search screen uses a different template.
* Cover image should be shown to the right of each title
with CSS class: "adlibris-cover"
* If clicked, should link to the OPAC detail view.
* Test opac-readingrecord.tt
* Click on your logged-in name to go to your personal page.
* Click on "Your reading history" tab on the left.
http://127.0.1.1/cgi-bin/koha/opac-readingrecord.pl
* Covers should be shown in leftmost column with
CSS class: adlibris-cover
* If clicked, should link to the same as the 'Title' link.
Sponsored-By: Halland County Library
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Added missing GetHiddenItems parameter change case
Without this prove t had a failure.
- Always use mocks, not set_preference
- Tweaks so t/db_dependent/00-strict.t passes
There was a typo botcat vs borcat and borrowernumber was never
defined. Grabbing from userenv, like other code does.
- Tweak t/db_dependent/Items.t to fully test changes
This will test all the if structures fully in GetHiddenItemnumbers.
prove t/db_dependent/Items.t
- Tweak borrower category code
$borrower->{categorycode} on a Koha::Patron is not the
same as $borrower->categorycode. Fixed error.
- Search was returning URLS for wrong interface
There was one search context place wrong. Changed it to $is_opac
as the logic for setting $is_opac was modified correctly.
- Corrected issues with category code.
When a user isn't logged in, $borrower is undef and causes error
when determining category code. Added conditional check.
- Properly trigger all changes in C4/Search.pm
- Fix QA Test tool failures
C4/Search.pm had some tabs.
- Add some commenting to make sense of logic
- Refactor EmbedItemsInMarcBiblio parameters to hashref
- Trigger GetMarcBiblio's EmbedItemsInMarcBiblio call.
prove t/db_dependent/Items.t
- Add missing test to trigger Koha/BiblioUtils/Iterator change
- Add borrower category overrides
These files generally add borcat parameter to GetMarcBiblio.
Others might include correction of filtering of items
(opac-basket), or a comment as to why no changes were done
(opac-search).
In the case of opac-search, correcting the first FIXME will
likely correct the OpacHiddenItems issues on tags. As such,
that is beyond this bugs scope.
Some code had loop optimizations and fixes made, like a
'next unless $record' when the biblio shouldn't even be in
the list.
- Modify opac-ISBDdetail and opac-MARCdetail
Both files had similar logic. They were rearranged and
optimized, so that both files would have practically identical
initial blocks of code.
Optimizations were possible, because GetMarcBiblio
returns a filtered record, so that there is no double call
(once in the opac-### file and once in GetMarcBiblio) to
GetHiddenItemnumbers.
- Fix hiding in opac-tags
opac/opac-tags.pl was not properly hiding.
There is currently one known bug associated with tags left.
If you have two biblios tagged by different people with the
same tag, the opac-search will show the one you tagged that
is supposed to be hidden, because tag searches work differently
than regular searches. This is beyond the scope of this bug.
See the FIXME's in opac/opac-search.pl
- Trigger the C4::ILSDI::Services changes
prove t/db_dependent/ILSDI_Services.t
- Added missing 'my'
- Test C4/Labels/Label.pm changes
- Improve C4::Record::marcrecord2csv test cases
- Corrected opac-details searchResult call
- Fix breaking issues constraint in ITerator test
- Fix ILSDI_Services test when clubs with branch exist
- Rebased again!
- Rebased t/db_dependent/Items.t conflict.
The test plan is in comment #112 last I checked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes a correction to a template filter to prevent
incorrectly-encoded HTML in media source links which were preventing
media from embedding correctly in the OPAC.
To test, apply the patch and enable the HTML5MediaEnabled and
HTML5MediaYouTube system preferences.
- Edit a record to include links to videos in 856$u. For example:
- https://www.youtube.com/watch?v=grTwH6Evdfc
- https://archive.org/download/POPEYEMeetsSindbadTheSailor1936/POPEYE%20meets%20Sindbad%20The%20Sailor%20%281936%29.ogv
View the record in the OPAC and confirm that the videos display in
the
"Play media" tab and that they play correctly.
Tested and works as described, also matches the intranet code.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Modify the conditional display of N/A in accordance with comment #17
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
All N/A strings in ILL templates wrapped in <span> to aid translation
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Switch getType -> get_type
- get_type now returns a type or undef
- Ternary now performed in template
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a method to the Illrequest object enabling it to return
its type, which is stored as an Illrequestattribute object
To observe broken state:
- Do not apply patch
- Ensure you have at least one Interlibrary loan created
- In OPAC view, go to "your interlibrary loan requests"
- => TEST: Observe that the "Request type" column is not populated
- Click on "View" for one of the requests
- => TEST: Observer that the "Request type" row is not populated
- In Staff view, go to "ILL requests"
- Click on "Manage request" on a request
- => TEST: Observer that the "Request type" row is not populated
To Test:
- Apply patch
- In OPAC view, go to "your interlibrary loan requests"
- => TEST: Observe that the "Request type" column IS populated
- Click on "View" for one of the requests
- => TEST: Observer that the "Request type" row IS populated
- In Staff view, go to "ILL requests"
- Click on "Manage request" on a request
- => TEST: Observer that the "Request type" row IS populated
Signed-off-by: Niamh.Walker-Headon@it-tallaght.ie
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fixes issues found during QA and unifies the SubfieldSelect function across the utils xsl's.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
4. Also try the attached test records and make sure their links work.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=14716
Test plan:
1. Catalog a record with series name "Series & more"
2. Find the record
3. Make sure clicking the "Series & more" link works and the ampersand is properly encoded in the URL.
4. Also try the attached test records and make sure their links work.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Based on the feedback of Jonathan, Katrin, Mark and Martin (thx), adding
the general remark that if lockout is enabled, an account may be locked
out after x attempts. This does not say that the account on hand is
locked or not.
Adding a <p> tag between 'Log in'-button and 'Forgot your password' for
presentation.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We should not expose more information than needed when someone tries
to login with invalid credentials. Saying that an account is locked
reveals that the account exists (or perhaps an email address).
Trivial fix. Keeping the var too_many_login_attempts for staff.
Note: We do not remove this distinction for the staff client here (in the
assumption that a library may well have additional security measures in
place for staff client). But it could be done too (on another report).
Test plan:
Enable lockout feature.
Enter invalid credentials until account locks out (on OPAC !!)
Note that message does no longer change to 'Account is locked'.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds two missing template filters as pointed out by the
template test.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new collection column to the item table when selecting
a specific item for a hold. The column will only appear if at least
one item has a collection set.
To test, in OPAC:
- Place a specific hold on
- a record with one or more items with collections
- a record with one or more items without collections
- Verify the collections display correctly when they exist
- Verify the table still works as expected
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch has been generated with the script provided on bug 21576.
It only affects variable used in the href attribute of a link *when*
href it the first attribute of the node (grep "a href")
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Why? Because we must filter the variables when we display them.
If we escape them on assignement, they will be double escaped:
[% XXX = "<span>pouet</span>" | html %]
[% XXX | html %]
=> <span>pouet</span>
Also it will bring trouble if we are assigning a structure (see bug
21663 for instance).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
SET opaclayoutstylesheet does not need KOHA_VERSION, its defined by Asset.css()
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix a bad resolution conflict
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes the padding for mobile screen sizes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds local copies of the font files specified in the original
patch. A new JavaScript file has been added, fontfaceobserver.min.js,
which helps gracefully load font assets.
https://github.com/bramstein/fontfaceobserver
Information about the new assets has been added to the about page.
When using web fonts, there can be a delay, while the browser loads the
font files, between the time the page loads and the time the fonts
render. Font Face Observer allows us to specify a default font for the
initial page render, and then apply the web font after it has loaded.
To test, apply the patch and regenerate the OPAC css. View any page in
the OPAC and confirm that the custom font renders properly.
View the About page in the staff client and confirm that the new license
information looks correct.
Patch applies and OPAC and license look good. Looking forward to this.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
A suggestion for updating the OPAC CSS
This patch updates the css styling of the OPAC
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test
1) Choose a public list from the 'lists' menu in the OPAC.
2) Click 'Send list'
3) Log in as necessary
4) Fill in your own email address
5) Click 'send'
6) Check your email, the sent email will contain the text
"sent you from our online catalog, the virtual shelf called".
Apply patch, re-test. The email will now contain
"sent you from our online catalog, the list called".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the opac ILL template to use the $KohaDates plugin
for displaying dates. Also updated:
- Added "title-string" sorting to allow for correct sorting of dates in
the table of requests.
- Corrected capitalization as per our capitalization rules.
- Added self-closing / to inputs as per coding guidelines.
To test, apply the patch and log in to the OPAC as a user who has
multiple outstanding ILL requests.
- In the table of ILL requests, the "Request placed" and "Last updated"
dates should be formatted according to your system's dateformat
preference.
- Sorting of those columns should work correctly.
- View a request and confirm that "Request placed" and "Last updated"
dates in this view are also formatted correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the display of Request ID to the OPAC views of all a
user's requests and the individual request.
To test:
1) Ensure you have ILL enabled
2) Log into the OPAC as a user with at least one request
3) Go to the "your interlibrary loan requests" page
4) TEST: Ensure that Request ID is displayed as the first column in the
table
5) Click the "View" button on a request
6) TEST: Ensure that Request ID is displayed along with all the other
request information
Signed-off-by: mmg@interleaf.ie
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Bug 20995: (QA follow-up) Add html filters and fix doubled up columns from merge
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The 'Items in your cart' message is obsolete with the cart dropdown
box being removed.
Therefore the assignment of this text into the
MSG_IN_YOUR_CART variable (which is done in the opac-bottom.inc), and
the use of the MSG_IN_YOUR_CART variable in the updateBasket() function
(in the OPAC's basket.js) has been removed.
Sponsored-By: Toi Ohomai Institute of Technology, New Zealand
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Feedback from the Koha mailing list in Aug 2018 showed there was
widespread concensus for making the default behaviour of the OPAC cart
to be to open with one click, rather than clicking on the cart icon then
on the dropdown box to load the cart popup.
This commit is a combination of Owen Leonard's alternative patch
(slightly changing the markup in masthead.inc) and my
work to remove the dropdown elements from the template and basket.js
Test plan:
1. In Koha OPAC click on the cart icon (making sure to have items in the
cart and the dropdown box 'Items in your cart:..' appears.
2. Click this dropdown and the cart popup appears.
3. Confirm you can successfully remove items from and empty the
cart
4. Apply patch
5. Restart memcached, and plack
6. Click on the cart icon (making sure to have items in the cart) and
notice no 'Items in your: ..' dropdown appears
instead the cart popup loads straight away.
7. Confirm the items in your cart are displayed by the cart popup
8. Confirm you can remove items from/empty the cart, and that as you do
this the number of cart items shown by the number to the right of the
cart icon changes accordingly
Sponsored-By: Toi Ohomai Institute of Technology, New Zealand
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enabled Overdrive and fill all preferences
2 - Make sure OverDrivePasswordRequired is true
3 - Go to opac account
4 - Log in to overdrive
5 - Note the input is shown
6 - Apply patch
7 - Repeat
8 - Note popup is now a modal
9 - Note password is now hidden
10 - Confirm overdrive integration works as before
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Carry out changes requested in commenbt #27
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the way biblionumbers are passed to the cart script
for adding and removing single items. The title's biblionumber is now
stored in a data-attribute on the links for adding and removing. This
should be a more robust, unified way to handle these single-item
operations.
To test, apply the patch and enable the opacbookbag system preference.
Test adding and removing items from the cart from various pages using
various methods:
- By clicking an "Add to your cart" / "Remove" link in search results
- By clicking an "Add to your cart" / "Remove" link on a detail page
- By checking boxes in search results and adding via the dropdown
Each operation should work correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds CSS to exclude serial issues history links from having
an icon background. There is no part of the icon sprite which is
designed for that purpose.
This patch also tweaks the positioning of a couple of icons and makes
other minor corrections to related CSS.
To test, apply the patch and regenerate the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Open the detail page for a bibliographic record in the OPAC which has
subscriptions.
- Click the "More details" link.
- Confirm that the "Brief history" and "Full history" links have no
icon.
- Click the "Full history" link and do the same.
- On the normal, MARC, and ISBD views, confirm that the icons for those
links look correct.
- View the purchase suggestions page as a logged-in user. Confirm that
the "new purchase suggestion" link looks correct.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There's happiness too. You know.
Sponsored-by: Escuela de Orientacion Lacaniana
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the XSLT logic add the $g subfield in the 773 display
in both the OPAC and staff interface MARC21 record detail pages.
The XSLT chooses between different ways to create the link for the
related content, but then it only adds the $g in two of the cases.
There's no obvious reason for a different display.
To test:
- Have a record with:
=773 $tHost title $gp4.
=> SUCCESS: Notice the Detail view shows:
In: Host title p4.
- Have another record with:
=773 $tHost title $gp4. $w100
- Enable UseControlNumber (only to cover the case):
=> SUCCESS: Notice the detail view shows
In: Host title p4.
- Have another record with:
=773 $tHost title $gp4. $0456
=> FAIL: The Detail view doesn't show p4.
- Apply this patch
- Reload
=> SUCCESS: The Detail view displays p4.!
- Sign off :-D
Sponsored-by: Escuela de Orientacion Lacaniana
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'Standard number' indicates that you can search ISBN, ISSN and other
standard numbers, but we are using the wrong index and only get a
very limited search for biblionumber instead.
This patch changes the index from sn to ident.
To test:
- Check both staff and OPAC advanced search:
- Search for Standard number = ISBN
- Search for Standard number = ISSN
Both should work.
Toggle [Intranet|OPAC]NumbersPreferPhrase system preferences
- Check the label creator
- Add a new batch
- Use 'add items' option and search for Standard number
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Testing will require an OverDrive account, you should be able to obtain a
developer account here:
https://developer.overdrive.com/
You will need to register a SIP connection for patron authentication
To test authentication:
1 - Set authname default in OD prefs
2 - Sign in as a patron whose branch matches authname
3 - Verify the patron can sign into OverDrive
4 - Set the patrons branch authname to be incorrect
5 - Verify branch specific authname is used and patron cannot sign in
6 - Set the default authname to be incorrect and patron's branch
authname to be correct
7 - Verofy patron can sign in
To test circulation:
1 - Fill out all OD prefs and enable circulation
2 - Sign in to opac
3 - Verify you have an OverDrive tab
4 - Click 'Login to Overdrive'
5 - If password required you shoudl be prompted, otherwise you should be
signed in and see account info
6 - Test logging out and in
7 - Log-in, perform a search on the opac - you should see hold/checkout
buttons
8 - Test the buttons
9 - After holding/checking out items, check your account page
10 - Verify info is correct
11 - Log out of overdrive
12 - Search catalog click overdrive results
13 - Test "Login to Overdrive" link on OD results
14 - Verify page is reloaded, buttons show and work
Signed-off-by: Sandy Allgood <sandy.allgood@citruslibraries.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
RM update: Remove accidental tabs from updatedatabase.pl
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also included recompiled version of opac.css that we forgot.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The service returns "60+" if there are more than 60 results.
Without this patch the "Found %s results in RecordedBooks collection"
line is removed.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Use String.format() to make translation easier
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add RecordedBooks to the users page in the public interface
To Test:
1/ Apply all 3 patches
2/ Set the sysprefs to valid values (you will need a test account with RecordedBooks)
3/ Try a search
4/ Login to the OPAC, try to place a hold, or check an item out
5/ Check the opac-user page, see if your items are showing on the oneclickdigital tab
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Generated with:
perl -p -i -e 's/\|\s?\$Price\s?\|\s?html\s%]/| \$Price %]/g' **/*.tt **/*.inc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It would be nice if the callnumber portion of the callnumber + label was in a span, and it also makes sense to wrap the entire callnumber string in a span as well.
Signed-off-by: Petter <petter@libriotech.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This addresses comment #13.
This also applies cleanly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To Test:
0 - Enable overdrive search results on your koha
1 - From a source develop a link to your koha instance that opens a new
window:
<a target="_blank"
href="http://localhost:8080/cgi-bin/koha/opac-search.pl?q=love">Test</a>
2 - Click that link
3 - Note Overdrive results do not load
4 - Note error in JS console
5 - Apply patch
6 - Click the link again
7 - Note OD results load
8 - Note no error in console
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
See comment60 on Bugzilla.
Although I intentionally did not want to show date and time of refusal,
we can obviously add one line saying that we already have a no.
Test plan:
Login without consent and see no additional line.
Agree and verify that you see the registered on xxx line.
Disagree and verify that you now see "You indicated recently...".
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We add a section for the GDPR consent in opac-memberentry (only for the
self-registration). Not when editing personal details.
Test plan:
[1] Enable selfregistration (with confirm) and GDPR policy.
[2] Register a new account in OPAC. Verify that the GDPR checkbox is
required.
[3] After you submit, you should see a date in borrower_modifications
field gdpr_proc_consent.
[4] When you confirm, verify that the consent is visible on your consents.
[5] Enable selfregistration without confirmation mail. Register again.
[6] Check your consents tab again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a consents tab to the OPAC user account menu. We now
add a GDPR section here, but it is open for future extensions. Think of
a newsletter checkbox for instance.
Script opac-patron-consent handles the tab. And now only includes some
GDPR code but is also written for more general use too.
Test plan:
[1] Set GDPR_Policy pref to Disabled. Verify that OPAC operates as usual.
[2] Set pref to Permissive. Try to save a consent or a refusal. Note that
you are not logged out when saving a refusal.
[3] Set pref to Enforced. Save a refusal. You should be logged out.
Log in again and verify that the consents tab shows a No.
Note: a follow-up patch will add further enforcements.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the OPAC and staff client's XSL template for the
detail page so that series links based on a traced 490 tag use both
author and series title from the 800 tag.
To test you should have multiple titles in the same series with matching
490 and 800 tags in each record. Apply the patch and restart Plack if
necessary.
View the detail page for one of the series' titles. The "Series:" link
should link to a search which uses both series title and author.
Clicking the link should return the correct results.
Test both the OPAC and staff client.
Signed-off-by: John Sterbenz <jsterben@umich.edu>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Before this patch, the 'Request article' link is displayed whenever the
pref is enabled. In many cases this might be useless. Instead of a guess
as in opac-search, we now call can_article_request to know for sure.
Note: at least this is the case when a user has logged in.
Update sidebar template with template variable artreqpossible.
Add code in opac-detail, MARCdetail and ISBDdetail to fill it.
Test plan:
[1] Look for two biblios with items: one that should allow article requests
and one that should not (respecting branch, patron, item type).
[2] Verify on detail, ISBD and MARC that the link is displayed for
the first biblio and hidden for the second biblio.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If you enable pref ArticleRequests, until now all search results got the
'Request article' link. This patch tries to improve the situation by
using the new sub with the itemtype of the search result.
In most cases the number of links will drastically decrease. It may still
be possible sometimes that a link is shown while it effectively is not
possible, but we do not get the performance burden of determining that and
going through all items.
Test plan:
[1] Look for two borrowers P1 and P2 within categories C1 resp. C2.
[2] Look for two biblios B1 and B2 with default item types I1 resp. I2.
(See 942c in case of MARC21.)
[3] Make sure that no circ rules allow article requests. Enable the pref.
[4] Add/modify circ rule category=C1, itemtype=I1, art_req=yes.
Log out. Search for B1 and B2, verify that only B1 has AR link.
Log in as P1. Verify that only B1 has AR link.
Log in as P2. Verify that no biblio has AR link.
[5] Add/modify circ rule category=C2, itemtype=I2, art_req=item_only.
Log out. Search for B1 and B2, verify that both have AR links.
Log in as P1. Verify that only B1 has AR link.
Log in as P2. Verify that only B2 has AR link.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch sets opac-reserve.tt to use the list of pickup libraries instead
of every library in the system.
To test:
1. Go to cgi-bin/koha/admin/branches.pl
2. Configure one of your libraries to "Pickup location" => "No"
3. Go to OPAC and place a hold
4. See the provided Pickup location list
5. Observe the library that you configured is not present in the list
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch corrects the CSS for the user icon which appears when the
browser width is very narrow.
To test, apply the patch, rebuild CSS, and clear your browser cache if
necessary. View the OPAC with and without a user logged in and confirm
that the user icon at the top of the page looks correct at narrow
browser widths.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch replaces Bootstrap's glyphicons with Font Awesome icons.
To test, apply the patch and clear your browser cache and regenerate the
OPAC CSS from the LESS file if necessary. Check these icons and confirm
they look correct:
- Cart and Lists icons in the OPAC header
- User icon in the header when the browser window is narrow
- Languages menu when multiple languages are installed and
the OpacLangSelectorMode system preference is "top" or "both top and
footer."
- Set the SuspendHoldsOpac system preference to "allow" and log in to
the OPAC as a user who has one or more holds.
- Check the appearance of the "suspend" and "resume" buttons both in
the table of holds and at the bottom.
- With one or more clubs defined, log in to the OPAC and check the
"Clubs" tab on the user summary page. The "Enroll" and "Cancel
enrollment" buttons should look correct.
- On the "your messaging" tab in the OPAC, the "Digests only"
information icon should look correct.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch moves generation of the OPAC detail page's results browser
from JavaScript to the template. This makes the template easier to
understand and easier to debug. It also makes it possible for the widget
to be completely non-dependent on JavaScript.
To test, apply the patch and regenerate the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Enable the OpacBrowseResults system preference and perform a search
in the OPAC which will return multiple results.
- Click on any title in the first page of search results.
- On the bibliographic detail page there should be a "Browse results"
link in the right-hand sidebar just as before.
- Test that the "Previous," "Back to results," and "Next" links work
correctly.
- Click the "Browse results" link. A list of the first 20 search
results should appear. An arrow should indicate the title you're
viewing.
- Click any title in the results browser. The page should correctly
load that record.
- Clicking the numbered links at the top of the results browser
should do the same.
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch revises the style of the OPAC's login form modal view. The
goal is simply to make it look nicer.
To test, apply the patch and regenerate the OPAC's CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
In the OPAC, click the "Log in to your account" link at the top of the
page. It should trigger the login modal. While the modal is displayed,
resize the browser width to confirm that the form handles different
widths well.
Sign off if you think this is an improvement.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In the staff client, when viewing the content of a list, it can be sorted by 'title', 'author' or 'call number' but not by 'date added'.
This patch adds 'date added' as an option for default sorting of lists. It also makes it available as a sorting option while viewing lists.
Test plan:
In the staff client and the opac:
1) View a list containing several items
=> Notice that you can't sort by 'date added'
2) Try to edit the list or create a new one
=> Notice you can't choose date added as the default sort order
3) Apply the patch
4) When viewing the list you should now be able to sort by date added
=> Make sure it orders correctly
5) Edit or create a list and choose date added as default sorting order
=> Make sure it uses date added as default
=> On the staff client: test that the filter for 'sort by' works for date added
=> On the opac: test that, while viewing the contents, choosing 'default sorting' in the dropdown menu sorts correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adding Type of Unit (300$f) to the Opac details and staff side searches results and details display
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Adding 245$f and 245$g to the Results and Detail pages on OPAC and staff side
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
On the OPAC result list, below each result, there is a link:
"Save to Lists".
Patch changes this to "Save to lists" following our
capitalization rules.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We are going to say it quietly but this test does not catch the problem
when there are no spaces....shhhh
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Syntax was wrong:
Template process failed: file error - parse error - bodytag.inc line 4:
unexpected token (_)
It's escaped later so sounds ok here
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Here we go, next step then.
As we did not fix the performance issue when autofiltering
the variables (see bug 20975), the only solution we have is to add the
filters explicitely.
This patch has been autogenerated (using add_html_filters.pl, see next
pathces) and add the html filter to all the variables displayed in the
template.
Exceptions are made (using the new 'raw' TT filter) to the variable we
already listed in the previous versions of this patch.
To test:
- Use t/db_dependent/Koha/Patrons.t to populate your DB with autogenerated
data which contain <script> tags
- Remove them from borrower_debarments.comments (there are allowed here)
update borrower_debarments set comment="html tags possible here";
- From the interface hit page and try to catch alert box.
If you find one it means you find a possible XSS.
To know where it comes from:
* note the exact URL where you found it
* note the alert box content
* Dump your DB and search for the string in the dump to identify its
location (for instance table.field)
Next:
* Ideally we would like to use the raw filter when it is not necessary
to HTML escape the variables (in big loop for instance)
* Provide a QA script to catch missing filters (we want html, uri, url
or raw, certainly others that I am forgetting now)
* Replace the html filters with uri when needed (!)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
it also removes 'category_type' and 'description' from a couple of
opac scripts, they are not needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set does several things:
- it removes USER_INFO and BORROWER_INFO
These 2 variables contained logged-in patron's info. They must be
accessed from logged_in_user
- Use patron-title.inc for the breadcrumb at the OPAC, for consistencies
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch catches the SCSS up to the latest changes in master:
Changes to opac.less:
Bug 20756
Bug 20559
Bug 7547
Changes to print.less:
Bug 16575
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch converts the OPAC LESS files to SCSS. In the process of
converting opac.less (and other .less files) to .scss, I have improved
the completeness of the nesting, reordered properties, and in general
done cleanup based on rules in .scss-lint.yml. All of these changes
should have no impact on the style of the OPAC.
This patch modifies the commands used to compile CSS so that OPAC and
staff assets can be processed separately:
'yarn build' <-- Builds the staff client assets by default
'yarn build --view opac' <-- Builds OPAC assets
To test, apply the patch and compile the CSS by running the command
above (or apply the follow-up patch with compiled CSS).
Do a thorough review of the OPAC, taking care to cover as many pages as
possible and checking responsive behavior at the same time. There should
be no visual differences in the OPAC before and after applying the
patch.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the logged-in patron's name to the search history page's
breadcrumb navigation.
To test, apply the patch and view the OPAC search history page with no
user logged in. The breadcrumbs should read:
- Home -> Search history
Log in and return to the search history page. The breadcrumbs should
read:
- Home -> Owen Leonard -> Your search history
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21137
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Go to opac detail page
2) There are up to three datatables
- items
- items from other branches (only if there are any and the OpacSeparateHoldings preference is set)
- subscriptions
3) try to find record with all three tables and confirm, there is button
"Columns visibility" above the table
4) Apply the patch
5) Repeat 1-3 and confirm the button is no more here
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch addresses the lack of sanitization of the "notes" field on
the OPAC "View Interlibrary loan request" page.
To test:
- Apply the patch
- As an OPAC user, create an ILL request
- Navigate to the request's "View Interlibrary loan request" page
- Add the following note:
Hello
<h1>TESTING</h1>
<script>alert('pwned');</script>
- Click "Submit modifications"
- TEST: Observe, when the page reloads, only the following is preserved in the
"Notes" textarea:
Hello
TESTING
- As a staff user, naviate to the ILL requests table
- Select "Manage request" for the request you created
- TEST: Observe that the Notes field only contains:
Hello
TESTING
- TEST: Observe that no Javascript alert is displayed
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the 'using_https' check in OPAC templates in calls to
Syndetics resources. Instead, https is always used.
To test, apply the patch and enable Syndetics-related preferences. View
the following pages in the OPAC:
- Bibliographic detail page
- Browse shelf section of the bibliographic detail page
- Search results
- List contents
- Recent comments
- Recent comments RSS
- User summary page
- Circulation history
NOTE: I tested with made-up Syndetics credentials. This means my changes
didn't make the template explode, but it doesn't confirm conclusively
that the resources work.
Signed-off-by: John Doe <you@example.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some files were left behind when Bug 12538 removed support for Solr.
This patch removes them.
To test, apply the patch and fail to observe the existence of these
files:
koha-tmpl/opac-tmpl/bootstrap/en/includes/search/facets.inc
koha-tmpl/opac-tmpl/bootstrap/en/includes/search/page-numbers.inc
koha-tmpl/opac-tmpl/bootstrap/en/includes/search/resort_form.inc
Perform a search in the OPAC to confirm that nothing broke.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch contains the compiled CSS for the OPAC print stylesheet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the OPAC and staff client carts to use CSS to
control print output, removing a print parameter which was passed to the
script.
Currently, when you click "Print" on the OPAC basket, it navigates to
a new page and initiates window.print() followed by a
window.location.href change again. Unfortunately, due to differences in
IE, Chrome, and FF, it will either show the print options, navigate away
without showing them, or refuse to navigate away after printing. By
changing to using print CSS, we don't navigate away from the basket in
the first place, so we prevent this irregular behavior.
TEST PLAN
1) Apply the patch
2) Create an OPAC basket by clicking "Add to cart" on multiple items
3) Using Chrome, IE, and Firefox (of any version), click the "Print"
button
4) You should see the relevant print menu without the OPAC basket
re-loading in any way.
5) After printing is complete, you should still be on the OPAC basket
pop-up
6) Perform the same tests in the staff client
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the index definitions for zebra faceting of ccode in
koha for marc21, normarc and unimarc.
We also add lines to the templates to expose the new facet and enable
non-zebra faceting for ccode too.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The grouped OPAC results page has several untranslatable
javascript-added texts, including the selection modifiers "Clear all"
and "Select all" links, and the entries in the shelves/lists dropdown.
Compare to opac-results.tt
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a check for UPCs and well as ISBNs to the Novelist Select conditionals in opac-detail.tt
To test (note that you must subscribe to Novelist Select):
1. If your library does not use the raton ratings feature, activate it for the purposes of this test.
2. Display a record that does not have an ISBN in the 020 field, but has a upc (or other code) in the 024 field. The rating option will
display as 5 radio buttons and a "rate it" button.
3. Apply the patch.
4. Display the same record again. The radio buttons will be replaced with stars. This indicates that the scripts on the page completed.
Rather that using the patron ratings as in indicator, you can also use a web page inspector/debugger such as firebug or the built-in
inspectors in most newer browsers to check for script errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't check with Novelist Select, but read and checked changed made carefully.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=19502
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch is to avoid hitting an error page. We should eventually make the
max number returned configurable for ES.
To test:
1 - Have Koha running ES with 10,000+ records
2 - Search for '*'
3 - Click 'Last' to view last page of results
4 - 'Cannot perform search' error
5 - Apply patch
6 - Search again
7 - View 'Last' page
8 - No error, you go to the last of 10000
9 - Note the warning above the pagination buttons
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Enable sco and setup AutoSelfCheck
2 - Try to use self checkout and print receipt
3 - You shoudl be redirected to the login page
4 - Apply patch and restart all the things
5 - Try to use self checkout and print a receipt
6 - Success!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 16621 reverted part of bug 12509
1. Log in the OPAC and staff interface
2. Restrict the user logged in the OPAC (restricting yourself works)
Staff interface → Patron page → Restrictions → Add manual restriction
Put this comment the "OVERDUES_PROCESS Give the books back or we're comming!"
3. Install the fr_FR locale and switch the interface to it
4. Go to OPAC: /cgi-bin/koha/opac-user.pl
5. Then you should see the ugly comment with "OVERDUES_PROCESS"
6. Apply this patch
7. Update the translation: ./translate update or equivalent
8. Open misc/translator/po/fr-FR-opac-bootstrap.po
9. Find the string containing "Restriction added by overdues process"
10. Remove the fuzzy flag
11. Install the language
12. Refresh the page in the OPAC
13. Then you should see the translation + the comment instead of "OVERDUES_PROCESS" + the comment
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- make next patch easely reviewable.
- fix lone quote. (Replace by <strong>
- add forgotten condition for 9999-12-31
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates the shelfbrowser include so that the system
preference check for Coce will function correctly.
To test, apply the patch and test the OPAC shelf browser with each of
the enhanced content options enabled: Coce, Amazon, Google. In each
case, page through the shelf browser to confirm that covers load
correctly.
Signed-off-by: Cab Vinton <bibliwho@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In Breeding.pm we let Z3950Search return the xslt handler error codes back
to the template. They are converted to text messages by using an new include
file (added for opac and intranet now). The generic xslt_err code is now
obsoleted.
In Record.pm the errstr call is removed. The croak is done with the new
error code in err. This seems sufficient.
Test plan:
[1] Run Breeding.t
[2] Run Record.t
[3] Add a nonexisting xslt file to one of your Z3950 targets. Search on that
target and check if you see a error 'XSLT file not found'.
The bonus is these error messages are now translatable as they are in
the templates
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Add some records to cart in opac and show the cart, look at the print button/link
--> without patch it has darker background than other buttons
--> with this patch it has the same background
Note: tested wir firefox 45, firefox 60 and chromium 66
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a DataTables-generated print button to the OPAC cart. To
make that process easier, the DataTables plugin has been upgraded to the
latest version (1.10.18) with the Buttons plugin included.
Changes to the OPAC LESS file style the DataTables button to look like
the static version.
Other templates in the OPAC which use the DataTables plugin have been
modified to use up-to-date option names.
To test, apply the patch and add several titles to the cart.
- Open the cart
- Re-sort the cart using something other than the default sort
- Click the 'Print' button.
- A print view should open in a separate window, sorted correctly,
and automatically show the print dialog.
- Click the cart's 'More details' button and click the print button.
- This should trigger the print dialog directly.
- Test DataTables sorting on other modified pages:
- Bibliographic detail page (holdings table)
- Course reserves (table of courses)
- Course details (table of titles)
- Full subscription history
- Detail page for a subscription -> More details -> Full history
- Most popular
- Purchase suggestions
- Self checkouts
- Tag cloud
- Your fines
- Your interlibrary loan requests
- Your reading history
- Your search history
- Your search IDREF for ppn (I don't know how to test this)
The DataTables plugin is removed from "Your routing lists" and Self
check-in because it is unused.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes an invalid attribute from OPAC template markup. There
should be no visible change to the OPAC.
To test, apply the patch and confirm that the following pages still look
correct when using various cover image sources: Coce, Amazon, Google:
- Bibliographic detail page (opac-detail.pl)
- The shelf browser
- Catalog search results
- Recent comments
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch contains the compiled OPAC CSS.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch removes some leftover references to a file which no longer
exists. In the OPAC, loading-small.gif was included in CSS which was
never used. In the staff client, loading-small.gif should have been
corrected to spinner-small.gif.
To test, apply the patch and go to Tools -> Batch record modification.
- Submit a batch of records to modify
- In the table of titles which will be modified, click the 'Show MARC'
button.
- The modal preview window should show "Loading" and an animated
spinner before the MARC record is loaded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch is a fresh attempt at redirecting back to search
results after logging in on opac-search.pl
To test:
- Perform an OPAC search
- Login on opac-search.pl with the search results displayed
- The page is redirected to opac-user.pl
- Log out
- Apply the patch
- Perform a new OPAC search
- Note the URL query string
- Login on opac-search.pl with the search results displayed
- The opac-search.pl page should be displayed with the correct
query string and the page should indicate a logged in status
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and the patch works.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Apply patch
2 - Visit the opac
3 - Sign in
4 - You should not see any difference
5 - Inspect the element 'Welcome, {username}'
6 - Note the attributes for borrowernumber and branchcode
7 - Add to OPACUserJS:
$(document).ready(function(){
console.log( $(".loggedinusername").attr('data-branchcode'));
console.log( $(".loggedinusername").attr('data-borrowernumber'));
});
8 - Check the console and note you can see the info expected
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the page for adding a title to a list so that the
"Add to existing list" option doesn't appear if there are no lists
defined.
TEST PLAN
---------
1) Make sure no lists exist at all.
2) Make there is at least one findable biblio record entered
3) Find that biblio record in the OPAC
4) Click 'Save to your lists'
-- Notice that the whole save to list section is there.
5) Apply this patch
6) Click 'Cancel'
7) Click 'Save to your lists'
-- Notice you can only add now, which makes sense.
8) Run koha qa test tools.
Perform the same tests in the staff client.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and the patch works.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch modifies the markup of the users's holds table in the OPAC so
that if hold priority is displayed, the table will be sorted by that
number.
To test, apply the patch and set the OPACShowHoldQueueDetails system
preference to "Show priority level" or "Show holds and their priority
level."
- Log in to the OPAC as a user who has multiple holds with various
priorities. Include priorities which could be sorted incorrectly
using a text sort, e.g. 1, 10.
- View the holds tab on the "your summary" page. Confirm that the
priority column is sorted by default with the lowest priority holds
first.
- Set the OPACShowHoldQueueDetails preference to "Show holds" and
confirm that the holds table still displays correctly, sorted by
"Placed on" ascending.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and the patch works.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
