- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates MARC21 frameworks to Update No. 18 (April 2014)
Also updates values on database for MARC21 installs.
To test
1. Apply the patch
2. Run updatedatbase.pl, check that runs without error
3. Remove default framework, load again. Check that loads without
error.
4. Verify changes
Bibs
007/04 Sound recording -> q Quadraphonic, multichannel, or surround
347f -> Encoded bitrate
110/1,610/1,710/1,810/1 subfield c -> repeatable
Auth
110/1,410/1,510/1,710/1 subfield c -> repeatable
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Checked changes are according to documentation from LOC and
consistent between sample files and updatedatabase.pl.
No problems found, all English frameworks were updated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since this enh has been backported on 3.14, this patch should be applied
on 3.16 and master branch in order to update the updatedb entry.
It should not be executed twice otherwise the process is stuck on this
entry.
http://irc.koha-community.org/koha/2014-09-11#i_1567078
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a dbrev.
If people installed Koha after the initial dbrev (3.09.00.015), an install
with sysprefs.sql did not add the pref. So they still could not have it.
Test plan:
If you have the pref, running an database update should not do anything.
If you do not have the pref (delete it via mysql), it should be added.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 7955: [Statistics tab for Patron checkouts] introduced the pref
StatisticsFields but did not add it to the sql install file.
Test plan:
Run webinstaller or mysql ... < sysprefs.sql
Verify that the new pref is in your systempreferences table.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Run webinstall, new syspref loaded.
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- issues.auto_renew
- old_issues.auto_renew
- issuingrules.auto_renew
Default value is zero.
To test:
1) Run installer/data/mysql/updatedatabase.pl
2) Create SQL reports like:
SELECT * FROM issues LIMIT 0,1
3) Confirm that a column auto_renew was added to each of the three tables.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Item field permanent location should not be mapped to the MARC structure.
If a library did so, this dbrev will print a warning.
If refers to report 12818 for help in moving the data to more_subfields_xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by putting permanent_location in and out of the MARC structure.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like the ability choose to display the home branch
on search results while having circulation rules based on the holding
branch. This is currently impossible because both the display of the
branch in search results, and the selection of the home or holding
branch for circulation rules are controlled by the same system
preference: HomeOrHoldingBranch. This preference is described as being
used only for circulation rules, and makes no mention of its use for
display control. The display control should be split off into a separate
preference.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the value of the new system preference StaffSearchResultsDisplayBranch
matches the current value of HomeOrHoldingBranch
4) Set the preference to home branch
5) Perform a staff catalog search with results having items with differing home and
holding branches.
6) Note the home branch displays
7) Set the preference to holding branch
8) Repeat step 5
9) Note the holding branch displays
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, logic is now tied to a new system preference.
Passes tests and QA script.
Add LOC SRU server to sample servers installed.
This patch modifies four language files: de, en, es and nb.
For the other languages this may not be useful.
Test plan:
You could test this by using the webinstaller.
But you could also (backup) and delete your records in z3950servers, and
run the sample_z3950_servers.sql file from the command line.
Check if you see the new SRU server.
Tested using mysql. I truncated the table (to reset the IDs as well) and then ran the file. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- global replaced HightedStopWords syspref with NotHightedWords for
clarification purposes. Hopefully this is a bit better and still
not too verbose.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixed some tabs and a typo.
- changed sample words to and|or|not in sysprefs.sql and
updatedatabase
- changed systempreference name from OpacHighlightedStopwords
to HighlightedStopwords, as it also works for the staff
results page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch adds a system preference to control stopwords used to
prevent operators and other 'minor' words from being highlighted
in search results when the OpacHighlightWords syspref is enabled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised, I fixed the updatedatabase to use XXX so it won't
clash as much
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase.pl.
Also fixed tabs in opac-detail.tt
Feature passes all tests and QA script now.
Tested in intranet and OPAC with different words and searches.
Works on results pages and OPAC detail page.
Highlighting and unhighlighting still works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as expected.
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames name to servername and type to servertype.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all sql files by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removing icon, description and position from installer sql files.
Not all files contained them.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I have run all sql files on an empty table by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adjusts table z3950servers:
Drops unused columns icon, description and position.
Moves id column to first position.
Renames name to servername, and type to servertype. (This is not only more
clear but may eliminate some problems too with DBIx.)
Changes recordtype from varchar(45) to enumeration with two members. [The
upgrade replaces unknown record types with biblio, although it is very
unlikely to find such records.]
Adds SRU as servertype enumeration member. Removes opensearch, since it is
not used/supported. [The upgrade replaces unknown server types with zed
(z3950) (in exceptional cases).]
Adds new columns: sru_options, sru_fields, add_xslt.
Test plan:
Run database update via webinstaller.
Check your z3950servers table.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to choose a particular contact for
acquisitions and serials claims. To test:
1) Select a contact to use for claiming late orders and a contact
to use for claiming late issues.
2) Send a claim for a late order and a claim for a late issue.
3) Note that the claims went out to the proper people.
4) Run the unit test with:
> prove t/db_dependent/Letters.t
5) Sign off.
Note: the claim messages are recorded in the logs in the *Acquisitions*
module, not the Letters module as you might expect
This patch also fixes several perlcritic violations and centralizes
contact-related unit testing in Bookseller.t.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch normalizes the data structures used for bookseller
contacts.
To test:
1) Repeat tests described on previous patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan
Set up some overdue triggers, for example 5,10,15
Set up some holidays
Create some items that are past due (one due 5 days, 10 days ago etc)
Run the overdue notices script (misc/cronjobs/overdue_notices.pl)
Notice holidays are ignored
Apply the patch,
Switch the OverdueNoticeCalendar syspref to Use calendar
Run the overdue notices again
Notice holidays are now taken into account
Sponsored-by: BSZ
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Re-add the system preference maxreserves.
All the code using maxreserves is still in place. Though it
is not used in the Reserves module, it is used in all the
scripts where holds are placed.
Also adds a check so that a borrower cannot exceed the maximum
number of allowed holds by using the multi-hold feature via
the opac.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Set maxreserves to 3, set opactheme to bootstrap
4) Log into the opac as a patron
5) Place 3 holds
6) Attempt to place a 4th hold
7) Note you get an error message and cannot place a forth hold
8) Delete two of those holds
9) Attempt to place 3 or more holds as a multi-hold
10) You should see a warning that you cannot place this many holds
11) Try to anyway
12) You should see an alert to tell you to reduce the number of holds
you are placing.
13) Reduce the number for holds you are placing to 2
14) Your holds should now be placed
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Test scenario:
1. apply the patch
2. run updatedatabase.pl
3. install Croatian language
cd misc/translator
perl translate install hr-HR
4. go to Global system preferences > I18N/L10N preferences
check that Hrvatski(hr-HR) is available
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors.
Also tested translating to de-DE and on advanced search opac/staff
is listed translated.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Note: This also makes the language show up in the language pull
down in advanced search. Because the entry is the last in the file,
it will show last in the list. I am noting this here, the list
is not really consistently sorted right now and there is work under
way to change the way we handle this.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
