Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This permission exists in other installer files (for all other languages).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 2 circulation permissions: force_checkout and
lift_restriction.
During upgrade, these two permission are added to existing staff
users that already have the base circulate permission.
force_checkout allows a librarian to force a checkout if a limitation
occurred.
lift_restriction allows a librarian to lift a restriction for a patron.
Test plan:
1/ Find a debarred patron and go on the checkout page. The "Lift
restriction" button should be present only if the logged librarian has
the lift_restriction permission.
2/ If the force_checkout permission is set, a librarian should be
allowed to check out in several cases:
- age restriction
- the item is issued to another patron
- the item is not for loan
- the patron has overdue items
- the item is lost
- the item is a high demand item
- the item is reserved
- another case ?
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: The force checkout permission should not affect high holds
- typo checkout => check out.
- the force checkout permission does not affect high holds.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Bug 10863: Follow-up: Adding missing permissions to translated files
This patch adds the 2 new permissions to all remaining sample files.
If the permissions don't get installed, the problem is bigger than
having an English description.
Also adds back the question "Check out anyway?" for high demand items (HIGHHOLDS).
Test xt/permissions.t passes now.
Bug 10863: Rename lift_restriction with manage_restrictions
The pref manage_restrictions now takes into account "Lost card" and
"Gone no address" restrictions.
Test plan:
- log in with a user with manage_restrictions permission
- verify you can set/unset restrictions when editing a patron
- log in with a user without manage_restrictions permission
- verify you cannot set/unset restrictions when editing a patron
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Note: The AgeRestrictionOverride pref has to be set to "Allow" if you
want to override the age restriction, even if the new permission is set.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There were 2 INSERT in error.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I have gone ahead and fixed the typo pointed out by Mathieu:
Endommadgé-> Endommagé
Sample files install without problems, tests look good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds some categories of values in French installer :
- SUGGEST
- OPAC_SUG
- REPORT_GROUP
- LOST
- DAMAGED
SUGGEST and OPAC_SUG are used by Suggestions module.
REPORT_GROUP is used by Reports module.
It also adds a new status for "ETAT" (en commande)
It creates a 995$2 subfield in french frameworks when it did not exist.
It links existing 995$2 subfield with LOST category.
It cleans up the list of authorised values installed with "Lecture
publique" framework :
- some codes are moved in general 1-Obligatoire/authorised_values.sql
(SUGGEST, REPORT_GROUP)
- some are suppressed, because they are also defined in
1-Obligatoire/authorised_values.sql (langue, COUNTRY, statut)
- the code for inserting the ones left is changed (I suppress the `id`
column)
To test :
1. Take a fresh new Koha
2. Install Koha choosing French installer and UNIMARC Lecture publique
3. Check the authorised values are imported
4. Check the cataloguing frameworks are usable :
especially 995 $2 field, which must be mapped with LOST values :
Perdu, Long retard, Perdu et remboursé, Introuvable
you can also check 101$a (language codes), 102$a (country codes)
5. In OPAC, make a suggestion. See if you can select a cause for your
suggestion ("Bestseller" or "'L'exemplaire en rayon est endommagé")
6. In staff interface, manage some suggestions. See if you can select a
cause for rejection or acceptation ("Bestseller", "Budget
insuffisant" etc)
7. In reports, see if you can sort reports according to values of
REPORT_GROUP ("Circulation", "Catalogue", "Adhérents" etc)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_frequencies.* files have been moved from optional
to mandatory directories.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify all sample_numberpatterns.* files have been moved from optional
to mandatory directories.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All sample files for numbering patterns are moved from optional
to mandatory.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- List of libraries in basket.pl is now sorted by branch name, not code
- When IndependantBranches is ON, user has only the possibility to set
basket branch to its own branch, or to no branch at all.
- When basket do not belong to any branch, selected branch by default is
connection branch (was 'no branch')
- added id attributes to both added li elements
- change description of 'order_manage_all' permission to make it
clearer.
- remove Test::MockModule dependency
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new user permission for patron list management,
tools => manage_patron_lists.
This closes a security issue with the original patch series where
patron lists and their contents could be retrieved and modified
without requiring authentication of any sort.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
2d version, Correcting a typo
In French UNIMARC mandatory installer, some authorised values for languages, countries and unimarc function codes are wrong.
A lot of unimarc function codes and language codes are missing.
Reference for country codes is ISO 3166-1 standard
Reference for language codes is ISO 632-2 standard
Reference for Unimarc function codes are Unimarc Manual (french version online in BNF website and ABES website)
This patch correct wrong values and add new ones.
For the moment I keep some wrong codes, because they may be used by some librairies :
- language codes deu, lan, mla, sam
- function codes 571, 573, 574, 575
To test :
1) take a fresh new koha
2) apply patch
3) install Koha, choosing French UNIMARC settings
4) look if values are OK in authorised values and if you can use them in cataloguing module
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only, French installer installs authorised values
without problems.
Note: There is a problem loading sample labels unrelated to this
patch:
sample_labels.sql
ERROR 1146 (42S02) at line 3: Table 'koha.labels_templates' doesn't exist
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This followup adds Catalan language into languages
other than english.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Rebased to master
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This reverts commit 60508cb03d, reversing
changes made to 8579d07f14.
The patches for bug 7688 caused a failure in t/db_dependent/Serials.t:
not ok 8 - test getting history from sub-scription
Conflicts:
installer/data/mysql/kohastructure.sql
installer/data/mysql/updatedatabase.pl
kohaversion.pl
Serials numbering pattern and frequencies are no more hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This implies new sql tables (subscription_numberpatterns
and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
english and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern. You can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' infos
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Trivial string substitution.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Test Plan:
1) Run xt/permissions.t, note the errors
2) Apply patch
3) Re-run xt/permissions.t, note the errors are gone
Signed-off-by: Claire Hernandez <claire.hernandez@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds a new user permission overdues_report for the circulation module, and requires this permission to run the overdue items
report, rather than requiring full reports permissions.
Test plan :
With a user with permissions circulate_remaining_permissions :
- Add overdues_report permission to user
- Go to circulation home
=> you see "Overdues" link
- Clik on it
=> you are allowed to access and use this page
- Remove overdues_report permission to user
- Go to circulation home
=> you do not see "Overdues" link
- Edit URL : <server>/cgi-bin/koha/circ/overdue.pl
=> you are not allowed to access this page
- Go to main page
=> you don't have access to reports module
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolyn SOMERS <fridolyn.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Added a system preferences (RenewalSendNotice - default no) to controll the renewal notice sending.
Added to installer languages the renewal notice template.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass.
Installed Koha with all French sample data and checked that
all permissions were translated and diacritics were displayed
correctly.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
This feature will add the option of displaying a select quote
for the day on the OPAC homepage. It will include the addition
of a QOTD editor in the tools section of the staff interface
which will allow the addition, editing, and deletion of quotes.
A single system preference will enable/disable the display of
the QOTD on the OPAC homepage. A new granular permission will
also be added to conrol user access to the QOTD editor tool.
Possible extentions to this would be code to allow alternate
quote selection algorithms to be added to vary how the currently
displayed quote is selected from the table of quotes.
This patch is a squash of the following work:
--Adding quotes table to kohastructure.sql and updatedatabase.pl
Note: This patch is intended for a MySQL based installation only.
That means that it includes backticks because that is what is required
at this point in history to install Koha correctly on a MySQL based
installation.
Feel free to port this over to the Pg stuff in the data/Pg directory.
--Adding system preference to control display of QOTD on OPAC main page
--Adding sample quote data
These quotes are taken from various US presidents. I'm not sure these
are applicable to the rest of the world, so I'm leaving it to translators
and others to add sample quote data for other languages.
--Adding edit_quotes user permissions
--Squash with other db related patches in this series
--Adding quotes editor pages to tools
--Adding QOTD editor link to tools homepage
--Integration of DataTables into QOTD Editor
--Impleminting jEditable into the quote editor
--Adding delete and add option to editor
--Fixing OPAC display so the QOTD div does not show if no quote is returned
--Also removing useless code from tools/quotes.pl
--Adding spans around QOTD foo in opac-main.tt
--Also fixing quote selection logic to accomodate the possibility of
a single quote in the db a litte better.
--Changing timestamp column header to a more user-friendly 'Last Displayed'
--Fixing bug in quote selection logic. This bug caused a situation where
when the table had only a single quote with an id greater than 1 in it,
no quote would be selected.
--Fixing up sorting in the quote editor table. --jcamins
--Adding span element to quote separator --jcamins
--Overriding the default empty table message supplied by datatables-strings.inc
--Adds missing page heading
--Adds beginning of click-for-help elements.
--Refactors delete functionality to allow selecting of quotes to delete,
enabling multi-delete.
--Refactors saving added quote functionality so that striking <Enter>
saves the new quote.
--Refactors canceling aded quote functionality so that striking <Esc>
cancels the new quote.
--Removing debug console.log statements
--Implementng the YUI button widget/toolbar used on other pages.
--Adds a 5px radius to all YUI buttons to bring them into
conformity with the general trend toward rounded corners
--Fixes capitalization in quote editor
--Implements improvements suggested by jcamins and oleonard
--Adds DataTables Plugin dataTables.fnReloadAjax.js
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
new permission : edit_patrons
Plan test:
- Go on the page: tools > Patrons modification (modborrowers.pl)
- Enter a list of cardnumbers (or use a file)
- Modify one or more patron's fields (you can modify surname, firstname,
branchname, category, sort1, sort2, date of enrollment, date of expiry,
debarred date, debarred comment and borrower note)
- Save
- Check on the result page (or in database for non-displayed fields) if
modifications have been correctly made.
- re test with different attributes. For each attributes filled with an
authorized value category, you can select a value in a drop-down list.
Else it's a free input text. If your attribute is filled with a patron
category, the modification performs only on patrons belonging to this
category
- Save
- Verify on the result page
Signed-off-by: Mathilde Formery <mathilde.formery@ville-nimes.fr>
Signed-off-by: Stéphane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested:
Database update
- existing mapping
- no pre existing mapping
Frameworks
PROBLEM: some languages are still missing, I think only untranslated
frameworks are included in this patch.
Acquisition
- created a new order with edition filled out
- checked edition was saved to the correct field in cataloguing
- modified edition and checked display in acquisition
- edition also displays on basket summary page
http://bugs.koha-community.org/show_bug.cgi?id=7280
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Confirmed that the RELTERMS authorised values category is populated. Not
knowing French I can't comment on the translations, but any errors can be
corrected at a later date.
The previous patches missed adding the upload_local_cover_images permission to
languages other than en, and used a forbidden TT construct, giving jenkins
agitas and indigestion. This patch adds the permission to other languages and
corrects the syntax.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch adds 2 columns in the aqorders table :
- claims_count : number of claims for an orders
- claimed_date : date of the lastest claim
In the lateorders.pl table, you can not select orders from different
supplier because there is just one letter sent after clicking the "Claim
order" button. So, it's logic that you want to select only orders from
this supplier.
Modification in C4/Letters.pm:
refactoring code for claimacquisition and claimissues letter type.
Now, fields for theses letters check the table name. It's not possible
to chooce aqorders.title, this field doesn't exist !
Furthermore, you can add a <order> tag around your item fields, like
this :
-- Begin example
<<LibrarianFirstname>>
<<LibrarianSurname>>
<<aqbooksellers.contact>>
<<aqbooksellers.address1>>
<<aqbooksellers.phone>>
<<aqbasket.basketno>>
<<aqbooksellers.phone>>
<order>Library : <<items.homebranch>>
In your possesssion : <<biblio.author>>. <<biblio.title>>.
<<biblioitems.publishercode>>, <<biblioitems.publicationyear>>.
Callnumber : <<items.itemcallnumber>>. doc type : <<items.itype>>
Barcode : <<items.barcode>>
Date for the return : <<items.onloan>>.</order>
<<LibrarianSurname>>
-- End example
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch adds the field definition to
- it-IT (default and sample frameworks)
- de-DE, en, fr-FR, pl-PL (sample frameworks)
I am not sure about the database update. If we want to do that, it should perhaps update all frameworks and languages.
At the moment only en and de-DE default frameworks are updated.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds MARC21 field 545 to the English, French, German, and Polish MARC21
frameworks. The labels for the field still need to be translated into
French and Polish.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Some of the translated sql files still had 'Item_DUE' instead
of 'Item_Due' causing the staff interface to display 'unknown'
instead of the correct description.
To test:
- Do a new installation, using German, French, Polish, Russian or Ukrainian sample files.
- Actived EnhancedMessagingPreferences
- Create a new patron category and check message descriptions display correctly
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I verified that the new files works with the web installer, permissions
can be set and removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Sending messages will not work correctly without correct data in sample_notice_message_transports
and sample_notice_message_attributes tables. There is no way to configure those tables in Koha.
SQL files should be in the mandatory part of the web installer.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
There were some lines in the specific french sysprefs that were not french/unimarc specific at all
I've removed them, the file now only contains french & unimarc specific things
I also have removed NoZebra as it's deprecated, so should not be here anymore
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
