Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
preference works as expected.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Tested that CircAutoPrintQuickSlip clear the screen still works well
* Switch from C4::Dates to $KohaDates
* Fix 'Resume All Suspended All Requests'
* Change button text to follow capitalization rules
* Change 'requests' to 'holds'
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Errors:
Variable "$totalprice" is not available at /srv/koha/circ/circulation.pl line 448.
Variable "%renew_failed" is not available at /srv/koha/circ/circulation.pl line 456.
Variable "$todaysdate" is not available at /srv/koha/circ/circulation.pl line 458.
Variable "@todaysissues" is not available at /srv/koha/circ/circulation.pl line 459.
Variable "@relissues" is not available at /srv/koha/circ/circulation.pl line 459.
Variable "@previousissues" is not available at /srv/koha/circ/circulation.pl line 461.
Variable "@relprevissues" is not available at /srv/koha/circ/circulation.pl line 461.
Test scenario:
1. go to circulation page
2. verify errors in console output of plack
3. apply patch
4. reload and verify that errors are gone
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Adds the ability to suspend reserves. The new system preference
AutoResumeSuspendedHolds enables the ability to set a date for
a suspended hold to automatically be resumed.
When a hold is suspended, it will continue to increase in priority
as the holds above it are fulfilled. If the first holds in line
to be filled are suspended, the first non-suspened hold in line
will be used when an item can fulfill a hold that has been placed.
http://bugs.koha-community.org/show_bug.cgi?id=7641
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested with the preference on and off:
1. placed several holds in the staff client
2. suspended some with a date
3. suspended some without a date
4. triggered hold message by checking in for hold with suspensions
5. the suspended hold was skipped as it should be
6. tested suspending holds in the OPAC w and w/out dates
7. ran the cron to clear suspensions with dates
All the above tests worked as expected. Signing off.
Branches can have their own version of notices - added branchcode to
letter table.
Support html notices - added is_html to letter table.
Support for borrower attributes in templates.
GetPreparedletter() is the interface for compiling letters (notices).
Sysprefs for notice and slips stylesheets
Added TRANSFERSLIP to the letters
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The 'Add Child' button is not shown if 'borrowerRelationship' is empty.
System preference description changed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Part 2: This patch shows the message at checkout and checkin
How to test:
* Add a note in cataloguing
* Check it displays at checkout and checkin
* Check items without a note don't display anything
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds a new system preference, CircAutoPrintQuickSlip:
When an empty an empty barcode field is submitted in circulation
[ clear the screen | open a print quick slip window ].
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixed a merge conflict with the updatedatabase.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Another merge conflict resolved. Marked as Passed QA.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
To test:
Create 4 holds on a bib, for patrons A, B, C, and D,
Check in the item to mark hold as waiting for patron A
Check out the item to patron B -> reserve for patron B should be removed
Check in the item to mark hold as waiting for patron A
Check out the item to Patron A, hold should complete normally
Check in the item to mark hold as waiting for patron C
Check out the item to patron D -> reserve for patron D should be removed.
Check in the item to mark hold as waiting for patron C
Check out the item to patron C, hold should complete normally
Check in the item -> there should be no more reserves.
We also tested:
Created 4 holds on a bib with two items, for patrons A, B, C, and D
All worked as expected.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
I know there's talk of getting rid of this patron search method, but I had a
request for this and so here it is.
To test:
verify that branchcode is displayed on patron search results from
circulation.pl.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Some code coming from BibLibre has been lost in the process of inclusion in
3.4. The result is that fine in days does not work at all (you can setup rules,
but it does nothing)
Step to reproduce:
- Koha > Admin > circ rules > set 1 day fine every day of overdue for default
rule
- Issue a book return date last week
- check-in the book => no debarment is set
The following patch will fix all of those problems by :
* updating borrowers.debarred to a date field (instead of tinyint). It contains
the limit of the debarment
* changing API of DebarMember and UpdateBorrowerDebarred to pass a date
* display debarrdate where applicable. Note that a debarrdate of 31/12/9999 is
considered as unlimited and not displayed
* added a debarrcomment, usefull to explain why a patron is debarred (this is
independant from debarrdate changes and can be used when placing an unlimited
debarment too)
[2011-05-12] F. Demians. It works as described. And I can confirm this
functionality is impatiently awaited by French libraries since one year. Thanks
BibLibre for the good work and for contributing this code.
Bug 6328 Followup--update DB structure
Thanks Katrin.
Bug 6328: make comment a textbox / fix debar by notice trigger
Debarring by notice triggers was broken, because the new function
expects a date as second parameter.
The comment field in patron account details was a very long text field.
Patch changes it to be a textbox instead.
Bug 6328: Lift debarment leaves patron account
'Lift debarment' redirects to an empty circulation page.
BZ6328 follow-up 3
Fixes comment 23 from Fernando L. Canizo : when the patron was debarred and debar removed
he still could not check-out.
The changes in the IsMemberBlocked (that were on biblibre/master) were lost somewhere
The sub was still checking for old_issues instead of calling CheckBorrowerDebarred
to get a debardate if applicable
Note : this bug was appearing only is you had issuing rules defined for itemtype/categorycode/branch.
Seemed to work if you had only default rules. That's probably why it hadn't been spotted before
BZ6328 follow-up 4
Comments fron Zeno Tajoli: The patch is OK and I sign-off it. Two little changes done on
installer/data/mysql/kohastructure.sql and installer/data/mysql/updatedatabase.pl
Signed-off-by: koha <koha@kohabase.localdomain>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as advertised, doesn't affect display for non-organisational patrons.
Note: Display change in OPAC only affects the summary tab.
It would be a little bit more consistent to make the name show the
same on all tabs in OPAC patron account.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I repeated Katrin's signoff here (with permission). The patch only changed for some minor rebasing and cosmetic QA requests. Passed QA now.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds a check for the value of the ExtendedPatronAttributes
preference to the scripts and corresponding logic to the templates
controlling the sidebar menu.
The patch also corrects a duplication of attributes code in moremember.pl
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
1) Added extended patron attributes in configuration, turned ExtendedPatronAttributes on
2) Altered patron details, added values for patron attributes
> Verified patron attributes show show correctly
3) Turned off ExtendedPatronAttributes
> Verified patron attributes were hidden everywhere
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Removed SearchMembers() and replaced with more generic Search()
Amended Search() to try cardnumber first
Replaced SearchMembers() calls with Search()
Replaced SELECT with Search() where appropriate
C4::SQLHelper:
- added support for '' key for search filter.
- when passing an array to filter, join with OR (rather than AND)
- added support for key => [val1, val2] in filter
- did not document - there was no input documentation to start with,
and SQLHelper should be replaced with something better anyway
Signed-off-by: Liz Rea <lrea@nekls.org>
(again - testing merge issue)
The functionality of the patch seems to be maintained with Biblibre's changes.
I tested the following:
Extended attribute searching: works
3 part name searching: works
2 part name searching: works
1 part name searching: works
From:
mainpage.pl
members-home.pl
Patron search limited by branch: Works
Patron search limited by patron category: works
Ordering by cardnumber instead of surname: works
The "Check Out" field in the masthead.
Circ Autocomplete is not reliably functional at this time, but the problem appears to predate this patch.
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Explicitly specifies which fields to return in C4::Overdues::checkoverdues
SQL: all of biblio, items, and issues, and everything in biblioitems
EXCEPT marc, marcxml and timestamp.
Bug 6801: member details page taking long time to load when many checkouts present
This patch removes the call to GetMemberDetails in build_issue_data; this heavy-weight
subroutine was being run for every single item a patron (or their relatives) have checked out.
Instead, the borrowers first name, surname and cardnumber are added to the GetPendingIssues query.
I believe this is reasonable since GetPendingIssues can now return issues for multiple borrowers.
Also corrects the $borrowernumber used for GetIssuesCharges and CanItemBeRenewed; was using the borrower whose
page we were on, NOT the borrower of that specific item (which would be different in the Relatives Checkouts tab).
Template calls to [% scope.borrowername %] are now broken up into [% scope.firstname %] [% scope.surname %].
Signed-off-by: Liz Rea <lrea@nekls.org>
On my test data, a patron with 180 checkouts (without this patch) would take more than a minute to bring back the circulation.pl and moremember.pl pages.
With this patch, the time is reduced to 5 or so seconds.
Big ups to Ian for tenaciously hunting this one down.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Show patron attributes in the sidebar on circ and patron pages
[Edit from Owen Leonard: This patch takes changes originally in
Bug 5436 and isolates just the parts relating to display of
patron attributes. Because function for pulling patron attributes
was merged with the function for displaying address information
in SetMemberInfosInTemplate() (also found in Bug 5749), I moved
the call to GetBorrowerAttributes into the individual scripts.
That keeps the functionality relating specifically to patron
attributes separate from the proposed changes to displaying
addresses.
Because I think it's important to keep the display consistent,
I added display of patron attributes to all pages which include
the patron information sidebar.]
Rebased for compatability with bug 3489 and database documentation by
Ian Walls, 9-21-11
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adds "checked out from" column to the right of "checked out on" on both
circ/circulation.pl and members/moremembers.pl. Columns are sortable with tablesort
(though only on circ/circulation.pl if syspref enabled).
The branch name is sourced from issues.branchcode.
EDIT BY Owen Leonard: Adjusting table columns which are sorted by default
to accommodate the new column.
Things look good! Thanks!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Liz Rea <lrea@nekls.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Change to parameter list in GetPendingIssues made it
callable by an empty list resulting in invalid sql being
sent to server. As this was occuring on most issues error log
was filling up. Put safeguard in the routine
Also don't bother calling when you have no need
Some of the processing was needlessly obscure
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The script tries to parse the patron expiration date without
checking that it is a valid date. If expiration date is empty
it doesn't get caught along with past expiration dates.
I wonder if this line was supposed to catch this problem:
Line 233: if ( $warning_year*$warning_month*$warning_day==0
This patch adds "!$borrower->{'dateexpiry'} ||" to that line.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
- Moving columns around to match display of patron's own checkouts
- Correcting terminology (issues, borrowers)
- Hiding columns added in previous patch which do not display in
the standard checkout list: materials, stock number, collection.
If these are to be added they should be added to all displays.
[edit] Adding display of relative's cardnumber alongside their name
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Adding state variable to various circ and member pages so that
sidebar display of patron details includes state.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Duplicate of '[PATCH] MT3747: Shows member relatives in issueslists' : Subject was wrong
MT3747, Follow-up: Adds siblings issues
MT3747, Follow-up: Shows member relatives in issues lists
- Now displays patron's and relatives' issues apart
MT3747, Follow-up: Shows member relatives in issues lists
- Removes renewal in circulation.pl
- Adds links to moremember.pl
MT3747, Follow-up: Shows member relatives in issues lists
- Remove unuseful warn
MT3747, Follow-up: Shows member relatives in issues lists
- Removes renewal in moremember.pl
MT3747, Follow-up: Shows member relatives in issues lists
- Adds sorting for circulation.pl
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Enables the library to choose whether to have patrons scan their barcodes for self checkout, or login
with username and password. Uses 'checkpw' for compatibility with LDAP authentication.
Also introduces a few new system preferences to make Self Checkout more secure and manageable:
SelfCheckTimeOut: the number of seconds before the self-checkout login times out for a patron
AllowSelfCheckReturns: indicate whether or not patrons can return materials via self-checkout
SelfCheckHelpMessage: user-configurable HTML to show specific text on the Help page.
Thank you to Marlboro College in Marlboro, VT for sponsoring and testing this development!
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Implements the RFC found at http://wiki.koha-community.org/wiki/Hard_Due_Dates_Circ_Rule_RFC. See squashed commits
messages below for details of implementation.
Squashed commit of the following:
commit 871b91af00871146eb1216ebf5ce673dda2c5925
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Tue Dec 28 15:09:49 2010 -0500
Hard Due Dates dev part 3: implementing the due dates in circ
CalcDateDue now calls GetLoanLength, rather than each invocation running separately one after another. Therefore, instead of
the 'loanlength' param, CalcDateDue now takes 'itype', and uses the info to get both the issuelength and the hardduedate info (if it exists)
Global Due Date no longer populates in the sticky due date field in Circ, since it can't be determined before the item is scanned. Any specified
due date still overrides the circulation rules, if allowed.
Hard Due Dates in the past will return an error message, but can be manually specified if truly desired.
Also, a small fix to updatedatabase.pl to allow the old data to populate if possible.
commit 14d5505f3c01287a2464a759f0076c1d4b665c49
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 18:28:11 2010 -0500
HardDueDates dev part 2: adding admin interface
Adds columns to Smart Rules page, including calendar for easy date selection.
Removes globalDueDate and ceilingDueDates from system preferences editors
commit 76e3e3d86a7a54c6ce4253e7f68278b4dc75a0bb
Author: Ian Walls <ian.walls@bywatersolutions.com>
Date: Mon Dec 27 15:58:05 2010 -0500
HardDueDates dev part 1: database changes
Adds two new columns to issuingrules, a hardduedate and a hardduedatecompare. If globalduedate is set, use that as the universal value
for all circ rules. Else, if ceilingduedate is set, use that as the universal value. Adjust the comparison accordingly (-1 before, 0
exact, 1 after). the old system preferences globalDueDate and ceilingDueDate are then removed.
Rebased onto 3.03.00.032
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The link to the Fast add framework was never shown.
Now the link is shown if you have the right permissions (fast cataloging or superlibrarian).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Double clicking on an item in the list of matching names now automatically
submits the form when checking out to a patron by name rather than barcode.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch improves the phrasing of several messages by
breaking the message variable into distinct parts for more
natural-sounding warnings when:
- Checking out an item on hold for another patron
- Checking out an item which is waiting for another patron
- Checking out an item which is checked out to another patron
- Checking out an item which is checked out to this patron
- Checking out to a patron who has too many checked out
I would appreciate special attention to my changes to the
TooMany function in Circulation.pm to make sure I handled
it correctly.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Raise warning rather than disallowing
Remove due date js validation when checking out
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed small error in circulation.tmpl
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This system preference allows the librarian to toggle on or off whether the JQuery tablesort is used on the
circ/circulation.pl page. For patrons with many checkouts, this sort may cause very slow page loading (and
therefore slow circulation transaction time), depending on the browser and local machine used. Staff can
still see a sortable list of current checkouts on the members/moremember.pl page.
My revision prevents the template from including *any* tablesorter code if the
preference is feature is turned off: both the circulation list and
the holds list will have no jQuery tablesorter.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Ian Walls <ian.walls@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
An embedded query in circulation.pl for BOR_NOTES authorized
values can be replaced with a call to GetAuthorisedValues
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The removed section of code contained a "my $dbh = C4::Context->dbh"
which was required for the query of BOR_NOTES. That line has been
moved accordingly.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works for HTML5 because it loads smoothly and no plugins required but *at
this time* this update will only work with staff clients which are Firefox
version >=3.5 (std for Koha) but other browsers will soon be adding support.
Additional sounds are included for people to modify and play with, but this
is such a simple upgrade I doubt at this time Koha needs another complex
selector so users can add their own sounds. It could be a nice enhancement
later, of course.
Suggest we stick with HTML5 <audio tag because it is a standard and no
plug-ins.
This simple update has been running live for SMFPL.org for almost 2 weeks
-Darrell Ulm
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Fix obvious warning generators
use of string comparison on numeric values
use of capture variables without testing comparison
reuse of variable names in same lexical scope
Tidy some layout issues
remove commented out code
remove unused variables
remove tabs from mixed space tab layouts
rewrite a couple of expressions where code flow obscured
The patch sets a "flagged" variable for displaying the messages correctly, bringing it in line with the way other messages are displayed. The patch also includes some markup tweaks and a change to make display of the "add message" link javascript-dependent.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
This system is indended to replace the old opacnotes
and borrowernotes fields in the borrowers table.
This system allows an unlimited number of Libraran and OPAC notes to be
attached to a borrower. Each note has a message, a message type,
the data it was created, and which library created it.
Each message can only be deleted by the library that created it unless the syspref
AllowAllMessageDeletion has been set.
This system may be used simultaneously with the old notes system and does not affect it in any way.
A new database table (messages) was added for this feature.
The System also allows for pre-defined notes for Borrower records
To use these, just create authorised values with the category BOR_NOTES
where the Authorized Value is the short description shown in the pulldown,
and the description is the text that should be in the note.
Original Author: PTFS Contractor <dbavousett@ptfs.com>
This work co-sponsered by Middletown Township Public Library, Middletown, NJ, USA
and East Brunswick Public Library, East Brunswick, NJ, USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Button added to clear the last Borrower record after transaction is complete
To enable, turn on the syspref DisplayClearScreenButton.
This work was sponsored by Middletown Township Public Library, Middletown, NJ USA
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Removed many unused variables.
Switched to elsif where appropriate.
Cleaned up some whitespace.
Corrected comments.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
The array was populated and values flagged with an accessor, like:
for (@failedrenews) { $renew_failed[$_] = 1; }
But this means that an array of possibly hundreds of thousands of elements
would have to be auto-populated for high itemnumbers. A hash is the correct
structure. We also haven't checked the user input for validity, so we do not know
for sure that @failedrenews really does contain just itemnumbers.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Store the stickyduedate in the session. So "Remember for Session" means
for session rather than "while on this page".
Includes some updates since initial submission of patch.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Per suggestion from Joe Atzberger, match on \s
instead of [ \t] for stripping leading and
trailing whitespace from barcode lookups.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
circulation.pl lacked the code to check whether category codes existed, meaning it would only display category types.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
GetPendingIssues did several bad things:
~ select * on a 4 table join,
~ including multiple namespace collisions,
~ including large fields marc and marcxml from biblioitems,
~ return ($count, \@array_being_counted).
Not everything is fixed here (see FIXMEs), but the situation is
improved considerably, with bug 2900 resolved. The "timestamp"
namespace collision in query should be resolved by separate patch.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a little javascript to the Patron Selection form input after searching for a patron to check out to.
On click it redirects to checking out to the clicked patron.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch also lightly refactors the conditional structure wrapping the
call to AddItem, renaming a couple variables to remove double-negatives and
abstruse logic. If SpecifyDueDate is ON, then the input box is used to pass
GlobalDueDate, allowing modification by circ staff, resulting in a default
'sticky' due date of the global due date in that mode.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Removed unused $dbh variables, converted to loop_context_var instead of togglecolor.
Prevented double comparison in sort. The rest is whitespace cleanup.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Originally by Jesse Weaver <jesse.weaver@liblime.com>
This patch creates a new system preference, AllowRenewalLimitOverride,
that, if YES, allows the renewal limit to be manually overridden. It
updates C4::Circulation and reserve/renewscript.pl to obey this.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
the stickyduedate input isn't sent on from the question dialogs. This
causes it to un-stick if there is a question.
Also removed month, day, and year as there seems to be no use for them.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This patch fixes several improperly named variables and includes the home library variable on the pages that were missing it. The category
description was added to the GetMemberDetails function since a couple of the pages using that function required the variable.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Added the zipcode to display along with the patron address when you are viewing a Patron from the intranet.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Title-level and item-level requests are now more
clearly distinguished in the patron details page
and the patron checkout page.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
This adds a variable to the checkout form, debt_confirmed, that is 1 when the de
bt block message has been canceled for this session.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This makes C4::Circulation::AddRenewal update lastreneweddate, then has circulation.pl check today's date against issuedate or lastreneweddate. It also cl
eans up a little parenthesis spacing.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Modified overdue check in circ/circulation.pl to use Date::Manip's Date_Cmp. This would likely be useful other places in the file.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This resolves all remaining significant parts of the bug.
Note that this may have to be revisited for hourly or partial-day circ functionality
for 3.2.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
If a patron's fine balance is over the limit set by the
noissuecharges syspref, checkouts are blocked. However,
this was not made very clear in the interface.
Improved the display by doing the following:
[1] If the fine balance is over the noissuecharges limit, use the "blocker"
styling (i.e., make all of the text red).
[2] Add wording to explicitly signal whether or not the fine balance is
blocking charges.
Documentation changes: new screenshots of blocked checkouts.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Adding a new routine GetBorrowercategoryList in C4/Member
Displaying categoryname when listing categories in memberentrygen.pl
using categorytype returned with GetMember wherever it is possible.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Adding New Systempreference AddPatronLists
This systempreference allow administrator to choose if patrons are created on categorycode lists or category_type ones.
Overloading GetBorrowerCategory so that if no parameter provided, it returns the list of category records
Changing memberentry.pl in order to use the categorycode when provided.
Bug Fixing Circulation.pl so that doesnot come up with Error 500
with no category selected for GetBorrowerCategory
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
* use Date::Calc to perform date arithmetic
* use Date::Calc::Today to consistently format the current date
* format date per syspref in overdue report
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Added GetPatronImage function to Members.pm
Added code to circulation.pl, boraccount.pl, readingrec.pl, and moremember.pl to grab patron image and pass it off to the template
Corrected code in circ-menu.inc to properly display patron image.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
NOTE: will fail if user manages to enter date
in wrong format. This is not a change from before
this patch, but is pointed out.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
- Member pages now use member toolbar include instead of circ one
- setstatus.pl now uses 3.0's patron renewal function
- Adding missing item-bullet.gif (Bug 1659)
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Refactoring to provide single place to get CGI::Session ojbject;
fixes bug for DB storage method other than 'mysql'.
This refactoring is also part of the patch series for
handling large input files for staging and processing
MARC records.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
item-level_itypes still need display changes in both opac and staff.
Signed-off-by: Chris Cormack <crc@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Abiding by Name Convention.
Using Members wherever it should be used.
Borrower is only used for borrower Categories.
+ GetBorrowersWhoHaveNeverBorrowed
and lists like that.
So this implies quite a change for files.
Sorry about conflicts which will be caused.
directory Interface::CGI should now be dropped.
I noticed that many scripts (reports ones, but also some circ/stats.pl or opac-topissues) still use Date::Manip.
