It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold.
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To recreate:
1 - Place a hold in your system
2 - Set that hold (or all holds) to expire today
update reserves set suspend_until=CONCAT( CURDATE()," 00:00:00");
3 - Run misc/cronjobs/holds/auto_unsuspend_holds.p
4 - Note the hold is sitll suspended
5 - Visit /cgi-bin/koha/reserve/request.pl for the book with the hold
6 - Note the suspend date is tomorrow (and cannot be set to today]
7 - Click update holds - the date in db is now set to tomorrow
8 - Reset to today
9 - Apply patch
10 - Run the cron again
11 - Visit the page and note hold is unsuspended
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a regression after bug 14695.
This patch adds itemnumber and barcode as optional params in ReserveSlip used
by hold-transfer-slip.pl to generate HOLD_SLIP. This is for ReserveSlip to be
able to generate correct slips when items in multi-item holds are checked in.
Test plan:
1) activate a circulation rule with multi-item holds
2) Place two holds on same biblio for patron
3) for debugging, either use browser console to observe POST request and responses
or use info from reserves, e.g. reserve_id in the HOLD_SLIP
4) checkin two items from same biblio on pickup branch
5) note that both holds are effectuated, but reserve_id is the same on both slips
6) also note that there is no itemnumber or barcode in the requests from returns.pl
7) Apply this patch
8) repeat 2-4
9) note that reserve_id is now different on the two slips
and/or:
Run tests:
t/db_dependent/Reserves/ReserveSlip.t
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to call Koha::Hold->set_waiting to correctly
calculate the expiration date.
It fixes a regression introduced by
commit 26634151db
Bug 12063 - Fix QA failures
The expiration date has to be set for waiting holds
== Test plan (time to execute: less than 4min) ==
1. Set ReservesNeedReturns to "Don't automatically"
2. Place a hold on a specific item
3. Check it in and confirm hold
4. The hold should have an expiration date
record page → Hold → "Expiration" column
5. It should be listed in staff:/cgi-bin/koha/circ/waitingreserves.pl
6. Set ReservesNeedReturns to "Automatically"
7. Place a hold on a specific item
(which should also behave like we check the item in to
keep it for the patron)
8. The hold should have an *empty* expiration date
record page → Hold → "Expiration" column
9. Holds awaiting pickup page should crash
staff:/cgi-bin/koha/circ/waitingreserves.pl
10. Cancel the hold to remove the corrupted data
record page → Hold → the red X
11. Apply this patch
12. Place a hold on a specific item
13. The hold should have an expiration date (not empty)
14. It should be listed in staff:/cgi-bin/koha/circ/waitingreserves.pl
15. Celebrate!
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point the subroutine is not used anymore
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Following the pattern introduced by bug 19300, we are going to move the
OnShelfHoldsAllowed logic to Koha::IssuingRules->get_onshelfholds_policy
Test plan:
Make sure the onshelfholds policy is correct when placing a hold
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
[1] For consistency going back to IsItemOnHoldAndFound in this sub.
This call is used in the on_shelf_holds == 2 case too.
The routine will be refactored quite soon.
Adding the else branch for on_shelf_holds == 0 for more clarity.
[2] Removing the test for found==F in reserves. In Koha F is only used
when the hold is filled and moved to oldreserves.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
- Checkout an item
- Place hold on this item,
- Return the item
- Make sure the hold is waiting (found W) and AllowOnShelfHolds is
not to 'Allow'
- Check that the button "Place hold" appears in opac detail page of
the biblio
- do the samewith items/reserves in transit
Changes on C4::Reserves::IsAvailableForItemLevelRequest
Make sure this tests pass:
- t/db_dependent/Reserves.t
- t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
Rebased - 2017-12-12 - Alex Arnaud
Bug 4319 - [QA fix] Create Koha::Biblio->hasItemswaitingOrInTransit
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is quite trivial and can be replaced easily with a new
method of Koha::Patron
Test plan:
Overdue notices and shelf sharing must be send the to an email address,
according to the value of the pref AutoEmailPrimaryAddress
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point the subroutine is not longer in use, we can remove it
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetReservesForBranch simply returns the waiting holds, for a specific
branch of not. This can easily be replaced with a call to
Koha::Holds->waiting
To avoid any regressions, I reuse the exact conditions (priority = 0),
but I do not think it is useful.
Test plan:
Make sure the holds information are correctly displayed on the waiting
holds screen.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the following errors:
The method reserve_id is not covered by tests at /home/vagrant/kohaclone/C4/Reserves.pm line 859.
The method set is not covered by tests at /home/vagrant/kohaclone/C4/Reserves.pm line 871.
Can't call method "store" on an undefined value at /home/vagrant/kohaclone/C4/Reserves.pm line 871.
This is caused by
commit ba1f2f93ef
Bug 19058: Move C4::Reserves::GetReserveId to the Koha namespace
We are calling ->reserve_id on a Koha::Holds set.
Test plan:
- Serials -> Find subscription -> "Edit routing list" in the sidebar
- Add 1+ recipients
- Save -> "Save and preview routing slip"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
default hold policy "From home library" is ignored.
Test plan:
- Have a test user from one branch (eg Centerville)
- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
category (or everyone and everything)
- For "Default checkout, hold and return policy", set hold policy to "From home library"
-> make sure there is no "Default holds policy by item type" to override the setting
- Have two items for a record.
1. An item with home branch same as test user (eg Centerville)
-> check this item out to somebody else
2. an item with a different home branch (eg Fairfield)
-> available, not checked out
- Try to place a hold for your test user. Does not work.
- Apply the patch
- Try to place a hold. Should work now.
Followed test plan, worked as intended
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Followed test plan in the intranet and OPAC, worked as intended.
With few assumptions made:
- when the hold works, should be on the item 1 (Centerville)
item 2 is only there to trigger the bug
- the circ rules were identically setup on each branch and in "Standard rules for all libraries"
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The variable is no longer used.
Removed a few empty lines on the way.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Apply just the first patch - the one with test
1) Run t/db_dependent/Reserves.t - test for CancelExpiredReserves should
fail
2) Apply the second patch
3) t/db_dependent/Reserves.t should pass now
Followed test plan, patch worked as described. Passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Place hold on item from another branch
2) Switch to that branch
3) Check them in at the other branch to set them into transport status (T)
4) Switch back to your homebranch
5) Check items in again, use the different confirm buttons and
compare: Only "confirm and print" will be set to waiting, "confirm"
remains in transport.
6) Apply the patch
7) Repeat 1-5 - now should work as expected - the hold is marked waiting
on "confirm" button too
8) Check the hold from the same branch, to make sure this doesn't add
regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolves:
The method found is not covered by tests at C4/Reserves.pm line 815.
Test plan:
Run t/db_dependent/Holds/CancelReserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It's done!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is something wrong with the DELETE log, it should be replaced with
a FILLED log.
Anyway, here we do not want it to be logged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetReserveId can easily be replaced with a call to
Koha::Holds->search->next->reserve_id
It will ease next changes to use Koha::Hold objects
Test plan:
Cancel a reserve and print a slip reserve
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This GetReserve subroutine can be replaced with Koha::Holds->find
Test plan:
- git grep GetReserve
must not return results where GetReserve is called
- Cancel a reserve
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can easily be replaced with
Koha::Patron->holds->count
Test plan:
- Set maxreserves=5
- Place 3 holds for a given patron
- Place again 3 holds for this patron
3+3 > 5 => The holds must not be placed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is no longer in used and can be removed
Test plan:
git grep GetReservesToBranch
must not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
git grep GetReserveInfo
should not return results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This subroutine is only used once and can be replaced with a call to
Koha::Holds->find
It will avoid unnecessary joins.
Test plan:
- Define a HOLD_SLIP template notice using fields from the tables
reserves, branches, borrowers, biblio, biblioitems and items.
- Generate one and make sure the values are correctly filled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
At this point, there should not be any occurrences of
GetReservesFromBorrowernumber anymore.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The today parameter is properly handled from C4::Letters subroutines, we
do not need to pass it from callers.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch set the lang parameter when C4::Letters::GetPreparedLetter is
called to generate the notice.
Note that we do not need to pass it if want_librarian is set.
TODO: I do not know what to do with TransferSlip
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Remove expiration date calculation in C4::Letter since it's done
when setting the reserve waiting,
- remove expiration date calculation in circ/waitingreserves.pl. Use
the one in DB,
- add a new atomic update that calculate expiration date for
waiting reserves,
- add tests for days_foward function and fix the infinite loop.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes koha automatically set expiration date when reserves become
waitting. Also it adds a new syspref "ExcludeHolidaysFromMaxPickUpDelay" that allows to
take holidays into account while calculating expiration date.
Test plan:
- Install this patch and run updatedatabase.pl script,
- allow ExpireReservesMaxPickUpDelay in system preferences,
- set ReservesMaxPickUpDelay to 5.
- Place an hold on a checked out item and check in this item:
The hold's expiration date should be today + 5.
- Allow ExcludeHolidaysFromMaxPickUpDelay in system preferences,
- add holiday during this pickup delay period,
- Create a new hold and make it comes waitting:
The hold's expiration date should be today + 5 + number of closed
day(s).
Also:
- Check that ExpireReservesOnHolidays syspref works again
without ExcludeHolidaysFromMaxPickUpDelay.
- Check that cancel fees apply again if wanted.
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
At this point, there should not be any occurrences of
GetReservesFromItemnumber anymore.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch is a QA follow-up to fix several issues:
- 1 call to GetReserveFee was wrong in ModReserveFill
- Update DB entry was wrong and insufficient
- Add robustness to the tests in sco-main
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, Koha charges all patrons a hold fee in all circumstances, if
a hold fee is applicable to their patron category.
This is immediately applied at point of request.
However, it would be useful to let patrons make requests without a
charge
being incurred until they physically have the item in their hands and
checked out to their cards.
The hold fee will only be added to the account as soon as the item is
checked out to the requesting patron.
With this scenario, we will be certain that patrons have the correct
item, and they are happy with what has been supplied.
It also means that patrons can place holds via the OPAC without reaching
the usage limit that has been selected.
Test plan:
0/ All the following steps must be done with a patron using a patron category with a hold fee
1/ Make sure that the existing options for HoldFeeMode work as before
2/ Select the third option "any time a hold is collected"
3/ Place a hold on an item
4/ Note that the patron has not been charged
5/ Check this item from the staff interface
6/ Note that the patron has been charged
7/ Place another hold
8/ Use the self checkout feature at the OPAC for the checkin
9/ Note that the patron has been charged and a message is displayed to
inform about the fee.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the current code to make it works with the new
option's name of the syspref.
It also refactor the tests to make them more reusable and robust.
Sponsored-by: Cheshire Libraries
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
