This patch adds an HTML5-based offline mode to Koha's existing
circulation module, allowing librarians to check out items using a
basically familiar interface. The feature will be implemented using
the Application Cache and IndexedDB features of the HTML5 specification,
both of which are fully supported on Firefox 10+ and Chrome 23+, with
limited support going back to Firefox 4 and Chrome 11. The basic
workflow enabled by this patch is as follows:
Part 1: While connected to the Internet
1. Enable offline functionality by turning on the
"AllowOfflineCirculation" system preference.
2. Sync the offline circulation database on the computer that will be
used for offline circulation by following the "Offline circulation
interface" link on the Circulation home page, choosing "Synchronize (must be online)",
and clicking the "Download records" button. This process may take a while.
3. Bookmark /cgi-bin/koha/circ/offline.pl (the page you are currently
on) for easy access when offline.
Part 2: While disconnected from the Internet
4. Navigate to /cgi-bin/koha/circ/offline.pl using the bookmark you
created while online.
5. Start checking books in by scanning the barcode of an item that has
been returned into the box in the "Check in" tab.
6. Scan the barcodes of any additional items that have been returned.
7. Start checking out books to a patron by scanning the patron's barcode
in the box in the "Check out" tab.
8. Set a due date (the "Remember for session" box will be checked by
default, since circulation rules are not computed during offline
transactions and therefore a due date must be specified by the
librarian).
9. Scan an item barcode (if you did not set a due date, it will prompt
you) to check the item out to the patron.
10. If a patron has a fine you can see the total amount (current to when
the offline module was synced), and record a payment. Unlike when in
online mode, there will be no breakdown of what item(s) fines are
for, and you will only be able to record the payment amount and not
associate it with a particular item.
Part 3: While connected to the Internet
11. Click the "Synchronize" link and choose "Upload transactions" to
upload the transactions recorded during the offline circulation
session.
12. Navigate to /cgi-bin/koha/offline_circ/list.pl (there will be a
link from the Offline circulation page) and review the
transactions, as described in the documentation for the Firefox
Offline circulation plugin:
http://wiki.koha-community.org/wiki/Offline_circulation_firefox_plugin
RM note: the IndexedDB jQuery plugin bundled with this patch is
copyright 2012 by Parashuram Narasimhan and other contributors and is
licensed under the MIT license. The home page for the plugin is
http://nparashuram.com/jquery-indexeddb/.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well, no koha-qa errors
Test with Firefox 24.0
1) did some checkouts pre sync
2) synchronize database (Download)
3) go offline
4) Proceed to checkin some items from patron
5) Proceed to checkout items to patrons, setting date
6) Proceed to checkout to expired patron, warning appears
7) go online
8) Upload records
9) go to review transacctions and proceed
10) verified on patrons that checkin/out are done
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to define default values in the authorities framework.
Some code already existed but the feature did not work.
Test plan:
1/ Choose a framework, field and subfields.
2/ Define a default value.
3/ Create a new authority and check that the subfield is
automatically filled with the default value.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. koha-qa reports some tabs, fixed in followup
Test
1) Apply patch, run updatedatabase.pl
2) Edit auth framework, put default value someware, save
3) Add new auth, default value present
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Verified database update is done correctly.
Controlfields 0xx
- Edited an existing field (001)
- Set a default value for subfield @
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Fields
- Edited an existing field (100)
- Set a default value for subfield e
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In OAI set mappings, the value "is equal to" is hardcoded. This
enhancement changes it to a dropdown menu to choose between "is equal
to" and "not equal to".
To test:
* define a set
* define a mapping for said set with "is equal to"
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
* change mapping to 'not equal to', save
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Fix bug id in updatedb.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The LC NAF and SAF authority Z39.50 database are indeed production
services, so we may as well showcase the new authority Z39.50 search
functionality.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- improve POD
- remove extraneous comments
- correct license statement in new files
- remove backticks in database update SQL
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is necessary because Bcrypt hashes are longer than MD5 hashes.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10513 added two columns to table itemtypes,
but sample_itemtypes can't be loaded because
it relies on old structure.
This patch rewrites sample_itemtypes.sql, stating
explicitly columns, removing backticks and consolidates
all in one insertion.
To test:
1) On master with current DB structure, delete item types
2) try loading sample_itemtyes.sql
It fails with "ERROR 1136 (21S01) at line 1: Column count doesn't match value count at row 1"
3) apply patch
4) try again, this time it will load and itemtypes created
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
SQL change only.
Tested by running the web installer on an empty database.
All sample data loads without errors.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch deletes information for default
MARC21 auth framework on tags 68a and 68b.
Also added update for current installs.
RM note: The 68a and 68b fields were defined in an attempt to include
both MARC21 classification and MARC21 authority records in the same
default framework, but I don't think this has turned out to be useful,
as to my knowledge nobody tries to use MARC21 classification records
in Koha, and if one were to want to, a distinct record type (or at
least auth_type) would be a better way to do it.
To test with current authorities_normal_marc21.sql loaded
1) apply the patch
2) run updatedatabase
3) check on database that there are no more
references to tags 68a and 68b
To test for new installs
1) remove auth frameworks
2) load authorities_normal_marc21.sql
3) check that load without problem
4) check on database that there are no more
references to tags 68a and 68b
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Db rev for new pref ConfirmFutureHolds.
Test plan:
Run [your server]/cgi-bin/koha/installer/install.pl?step=3&op=updatestructure
Optionally, run a new install to test sysprefs.sql.
Or:
Edit sysprefs.sql, leave at least the last few lines including the new one.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With these patches we now have 3 preferences that deal with
fines/fees and lost items:
Replacement price
- On marking lost: WhenLostChargeReplacementFee
- On return: RefundLostItemFeeOnReturn (preexisting)
Overdue fines
- On marking lost: WhenLostForgiveFine
System preferences work according to their description.
Further notes:
- Patches pass all tests and QA script.
- LostItem is changed and needs unit tests.
All occurrences of LostItem have been changed.
- Database update is ok. I had to fix the sysprefs.sql
file that has been recently rewritten and alphabetized.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This allow to keep transfers informations without having untranslatable
strings in database.
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On basket.pl and parcel.pl there is a 'Transfer' link which allow you to
transfer order lines from a basket to another.
The link leads to a new page which allow you to search for a bookseller,
then display this bookseller's baskets. Then you can pick a basket and
the transfer will be done.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This trivial patch set the default to 'yes' for this system preference.
To test,
On a clean install
- Navigate Home > Administration > Global System preferences > Logs
- AuthoritiesLog is set to "Don't log"
Apply the patch, install koha on a new DB.
- Navigate Home > Administration > Global System preferences > Logs
- AuthoritiesLog should be set to "Log"
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
One line patch, changing the default for new installations only.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
By sorting the sql syspref file, the frequency of merge conflicts
when dealing with it should be reduced.
Test plan:
- create a new DB with a new table named systempreferences (with the
same structure as the one you know).
- insert the current sysprefs.sql file into this table.
- note the number of rows in the systempreferences table.
- Create a dump of the system preferences, e.g.,
mysql> \T sysprefs-1
mysql> SELECT * FROM systempreferences ORDER BY variable;
mysql> exit
- apply this patch.
- delete all rows of the systempreferences table.
- insert the new sysprefs.sql file.
- verify the number of rows is the same as the previous.
- Create a new dump of the system preferences, e.g.,
mysql> \T sysprefs-2
mysql> SELECT * FROM systempreferences ORDER BY variable;
mysql> exit
- Verify that the two dumps (sysprefs-1 and sysprefs-2) are
identical.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add db documentation to borrower_files table.
To test:
apply
review kohastructure.sql to be sure documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: No errors. Tested loading on new database.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add db documentation for the quotes table
To test:
apply patch
review kohastructure.sql to be sure documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds db documentation to the biblioimages table.
To test:
Apply patch
Review kohastructure.sql to be sure that the documentation is there
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When issuing a book, some libraries want to issue by title or other details.
This patch adds a systempreference and code that allows it.
To test:
1) scan a patron card or enter a surname to start checking out;
2) enter title or other keywords;
3) the circulation screen should display a warning allowing to choose between copies.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The department and term columns in the courses table started
as varchar(20), but since they refer to authorized values, need
to be varchar(80) to match authorised_values.authorised_value. This
patch increases the width of those columns.
To test:
[1] Create two DEPARTMENT authorised values, one whose code
is shorter than 20 characters and one whose code is longer
than 20 characters.
[2] Create two courses; give one course the short department and
the other the long department.
[3] Go to the courses list. Observe that the department column is
displays the department name only for the short course.
[4] Apply the patch.
[5] Edit the course with the long department and assign that long
department to it again.
[6] Go back to the courses list. Observe that both of the courses
now display their assigned department.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified changes are consistent for new installations
and updated installations.
Passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a new system preference AllowTooManyOverride to control whether
a librarian can override the 'Too many checked out' message which is
currently always overridable.
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Attempt to check out 1 more item to a patron than the max issues
4) You should be allowed to override by default ( current behavior )
5) Set AllowTooManyOverride to "Don't allow"
6) Repeat step 3
7) You should be blocked from being able to issue the item
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The new system preference is activated by default, which mean there
will be no change in behaviour on update.
The system preference is correctly added to the database and .pref
files.
Test plan and QA script passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When overduefinescap was added to the issuingrules the datatype
given was decimal. This translates in MySQL to decimal(10,0).
This doesn't allow you to store decimal values and therefore
values like 4.5 are saved as 5 in the database.
To test:
On a current installation:
1) Try to enter 4.5 as Overdue fines cap. Verify that the value
is not correctly saved.
2) Apply patch and run database update.
3) Try adding/changing an issuing rule setting Overdue fines cap
to 4.5 again.
4) Verify the value is saved correctly.
Create a new Koha installation from scratch:
1) Verify that the issuingrules table has been created correctly
and that you can add/mofidy issuingrules correctly.
Because this bug can create data loss, the old database update
has also been changed to avoid this problem for people updating
at a later point in time. Checkout an older version of Koha
pre 3.09.00.027.
1) Run the database updates.
2) Verify again, that adding/modifying issuingrules works correctly.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a bug that prevented the circulate/overdues_report
permission from being assigned to staff users during upgrade. This
patch will not affect databases that are already running 3.12.x
or later.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This will only fix the permissions for updates done
after the patch has been applied. But I agree with
Fridolyn, that we can not safely update permissions for
existing installations.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changes 8 INSERTs into INSERT IGNOREs.
This allows current installs to benefit easier from the new tags/subfields.
Note that running with --force will not achieve the same! The multi-value
inserts will still be aborted, though execution continues.
Test plan:
Run the file or do a new install.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Ran the file on a current install manually.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Applies to new installs, although with the follow-up
patch, users can run the installer/data/mysql/en/marcflavour/marc21/mandatory/marc21_framework_DEFAULT.sql
script through the mysql client to add new tag and
subfield entries.
To test:
1) Delete MARC21 default framework
2) Apply patch
3) Test that new default framework loads without problem
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Run this file with and without this patch.
This patch adds 24 tags (338 vs 314) and 323 subfields (3951 vs 3628).
Verified that last QA comments were incorporated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ind' rather than 'ita' was set as the ISO639-2 language
code for Italian in the fr-FR, it-IT, pl-PL, ru-RU, and uk-UA
installation SQL.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I checked nb-NO and de-DE - language code there had already
been corrected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
