Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Issue description:
- call to ModZebra was unconditional inside 'store' method for Koha::Item,
so it was after each item added, or deleted.
- ModZebra called with param biblionumber, so it is the same parameter
across calls for each items with same biblionumber, especially when we
adding/removing in a batch.
- with ElasticSearch enabled this makes even more significant load
and it is also progressively grows when more items already in DB
Solution:
- to add extra parameter 'skip_modzebra_update' and propagate it down to
'store' method call to prevent call of ModZebra,
- but to call ModZebra once after the whole batch loop in the upper layer
Test plan / how to replicate:
- make sure that you have in the admin settings "SearchEngine" set to
"Elasticsearch" and your ES is configured and working
( /cgi-bin/koha/admin/preferences.pl?op=search&searchfield=SearchEngine )
- select one of biblioitems without items
( /cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX )
- press button "add multiple copies of this item",
- enter 200 items, start measuring time and submit the page/form...
On my test machine when adding 200 items 3 times in a row (so 600 in
total, but to show that time grows with every next batch gradually):
WHEN ElasticSearch DISABLED (only Zebra queue):
- 9s, 12s, 13s
WHEN ElasticSearch ENABLED:
- 1.3m, 3.2m, 4.8m
WITH PATCH WHEN ElasticSearch ENABLED:
- 10s, 13s, 15s
Same slowness (because also same call to ModZebra) happens when you try
to delete all items ("op=delallitems"). And same fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This depends on the framework parameter. Which should be added back to
the call in C4::Items.
Test plan:
[1] Mark in Default framework one subfield A repeatable and B not repeatable.
Go to item editor. (Work on a biblio in Default framework.)
Check saving and reopening these subfields with VAL1 | VAL2.
Subfield A should be cloned, B should be glued as entered.
[2] Mark in another Framework A not repeatable and B repeatable.
Change framework for this biblio.
Go to item editor again. Reopen item. Behavior subfields in reverse?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Ere Maijala <ere.maijala@helsinki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch fixes an issue when editing items.
* The issue
Cannot blank a subfield when editing an item.
If you have an item with itemcallnumber=42, then edit it, blank it and
save. The itemcallnumber is still 42
* Why? (line numbers from https://gitlab.com/joubu/Koha/-/tree/bug_23463)
additem (and other item's edition forms) receives a list of tags,
subfields and values, generates a MARC::Record::XML then calls
ModItemFromMarc:
717 my $itemtosave=MARC::Record::new_from_xml($xml, 'UTF-8');
727 my $newitem = ModItemFromMarc($itemtosave, $biblionumber,
$itemnumber);
And ModItemFromMarc:
282 my $item = TransformMarcToKoha( $localitemmarc,
$frameworkcode, 'items' );
283 $item->{cn_source} = delete $item->{'items.cn_source'}; #
Because of C4::Biblio::_disambiguate
284 $item_object->set($item);
ModItemFromMarc never knows that the field has been blank.
Prior to bug 23463 we had a map of default values, and ModItemFromMarc
was doing:
426 my $item = TransformMarcToKoha( $localitemmarc,
$frameworkcode, 'items' );
427 my $default_values = _build_default_values_for_mod_marc();
428 foreach my $item_field ( keys %$default_values ) {
429 $item->{$item_field} = $default_values->{$item_field}
430 unless exists $item->{$item_field};
431 }
I do not want to reinsert that list of default values.
Here I wrote a generic method in Koha::Object to set the value passed in parameter,
or "blank" if not passed.
It's nulled if can be set to null in DB, or the default value is retrieved from
the schema info.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
There should not be any calls left
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We did not do anything useful here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
That's done in Koha::Item->store, and Koha::Object->store for integers.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Same as _set_defaults_for_add
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
From C4::Items to Koha::Item
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Starting to replace the ModItem calls with Koha::Item->store
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We are done with AddItem, only need to log and index.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Remove the unique call to _set_derived_columns_for_add
Even if design to deal with other values it only dealts with cn_sort
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
_set_defaults_for_add is no longer needed as it is handled by dbic and koha::object->store
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It is no longer used.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch adds handling to catch transfers that may have been triggered
on item return.
Test Plan:
1) Enable AutomaticItemReturn and accompanying system preference
2) Return an item to the wrong branch and note the transfer
3) Check the database for the new trigger value
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
It was displaying hundreds of:
Use of uninitialized value in concatenation (.) or string at
/kohadevbox/koha/C4/Items.pm line 862.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Test plan:
Check the tab order of the item block on additem.pl (item editor),
Acquisition (neworderempty or addiso2709), serials-edit.pl.
You could also check services/itemrecorddisplay.pl and pass a
biblionumber; this script is used in additem.js for cataloguing and
acquisition.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
its output is displaying tons of
Use of uninitialized value $field in regexp compilation at /kohadevbox/koha/C4/Items.pm line 2106.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In items search, we can filter by items issues count, data coming from items.issues.
Most of the time, for an item with no issues this column contains NULL.
This enhancement proposes to consider NULL as 0 to allow searching items with no issues.
Test plan:
1) Use SQL to count items with items.issues = NULL :
select count(*) from items where issues is null;
2) Go to items search
3) Perform search with filter "Checkout count" = 0
4) Check you get the same number of results as SQL query
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Note that we change both cataloguing/additem.pl and C4/Items->PrepareItemrecordfordisplay
I can find no code that uses callnumber from the C4/Items sub, except for the itemrecorddisplay script
which is not called with an itemnumber from Koha and should be deprecated for REST or ILSDI or OAI (imho)
To test:
1 - Define itemcallnumber syspref as "082ab,092ab,9520,245a"
2 - Find a record with no items
3 - Ensure it has no 082 field, but an 092 field
4 - Go to add an item - itemcallnumber is empty
5 - Apply patch
6 - Go to add item, itemcallnumber should be the 092ab fields
7 - Delete the 092 field
8 - Go to add item, itemcallnumber should be the 245a
9 - Edit the callnumber to be "testing" and save item
10 - For should now show itemcallnumber="testing" as default
11 - Browse to http://localhost:8081/cgi-bin/koha/services/itemrecorddisplay.pl?itemnumber=## subbing the correct itemnumber
12 - Ensure the callnumber is defaulting to testing
13 - delete the item you created
14 - browse to URL above - callnumber should now be 245 again
15 - Add an 092 field to record and ensure it is now default callnumber
16 - Add an 082 field, it should now be default
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With bug 24217 pushed, lot of warnings appears during the tests are run.
Most of them are "Use of uninitialized value in "
Test plan:
Take a look at the output of run 1049
https://jenkins.koha-community.org/job/Koha_Master_D9/1049/consoleFull
Most of the warnings from this run will be removed by this patch
At least 2 are not fixed:
Use of uninitialized value in numeric eq (==) at /kohadevbox/koha/C4/Reserves.pm line 791.
t/db_dependent/Items_DelItemCheck.t => see 23463
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
We absolutely need that for modules.
We are enabling strict by using Modern::Perl.
Note that other modules from C4 use strict and warnings, instead of
Modern::Perl
Test plan: git grep 2505 **/*.pm should not return any results
And let's see later what needs to be fixed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
The system preference AllowItemsOnHoldCheckout only affects SIP based checkouts. I believe we should rename it AllowItemsOnHoldCheckoutSIP so it matches AllowItemsOnHoldCheckoutSCO. We should also update the description as well.
As far as I know AllowItemsOnHoldCheckout has never affected anything except SIP traffic. That does not preclude the addition of another AllowItemsOnHoldCheckout syspref that would affect the staff interface, but that would be an enhancement and is outside the scope of this bug report.
Test Plan:
1) Test AllowItemsOnHoldCheckout via SIP
2) Apply this patch
3) Test AllowItemsOnHoldCheckoutSIP via SIP
4) Note there is no difference!
5) Note the syspref description has been update to mention SIP
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
t/db_dependent/Items/GetItemsForInventory.t .. 1/9 DBD::mysql::st execute failed: Expression #1 of ORDER BY clause is not in SELECT list, references column 'koha_kohadev.items.cn_sort' which is not in SELECT list; this is incompatible with DISTINCT [for Statement "
SELECT DISTINCT(items.itemnumber), barcode, itemcallnumber, title, author, biblio.biblionumber, biblio.frameworkcode, datelastseen, homebranch, location, notforloan, damaged, itemlost, withdrawn, stocknumber
FROM items
LEFT JOIN biblio ON items.biblionumber = biblio.biblionumber
LEFT JOIN biblioitems on items.biblionumber = biblioitems.biblionumber
ORDER BY items.cn_sort, itemcallnumber, title"] at /kohadevbox/koha/C4/Items.pm line 838.
We simply follow what the error says, and add items.cn_sort to the SELECT list
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1 - Find an item
2 - Check it in at anothe rbranch and initiate a transfer
3 - View the item details or check db - note that holdingbranch is set as the destination library
4 - Complete or cancel the transfer
5 - Apply patch
6 - Initiate a new transfer
7 - Note the holdingbranch is set to the initiating library
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
If the cn_source has a default value defined in the framework it will
not be used when ordering or receiving serials.
Test plan:
Set the pref DefaultClassificationSource to Library of congress
Define a default value=ddc (for Dewey) for the ACQ and default framework
Receive an order (AcqCreateItem=on ordering) and confirm that Dewey is
selected by default (the default value from the ACQ framework is used)
Receive a serial and confirm that Dewey is selected by default
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
In serials receive and acquisition order creation from iso2709, the item edition form shows inputs that are missing "input_marceditor" class.
They are also missing tabindex and id.
The side effect is that those inputs dont get the "noEnterSubmit" class so form is posted if a barcode scanner is used or if enter is used on keyboard.
Test plan :
1)
1.1) Verify you have an item subfield linked to items.itemnotes, ie 952$z
1.2) Verify system preference "AcqCreateItem" is on "placing an order"
2)
2.2) Go to cataloguing module and edit an item
2.3) Verify that $z has an id, tabindex and "input_marceditor" class.
2.4) Verify that typing enter in $z does not submit the form
3)
3.1) Go to a serial with items creation, click on receive
3.2) Change status to "Arrived"
3.3) Verify that $z has an id, tabindex and "input_marceditor" class.
3.4) Verify that typing enter in $z does not submit the form
4)
4.1) Go to an acquisition basket
4.2) Click "Add to basket" and "From a staged file"
4.3) Click "Add orders" on a staged file
4.4) Go in tab "Item information"
4.5) Verify that $z has an id, tabindex and "input_marceditor" class.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch removed references to setting and getting the items.paidfor
field. Where it was used for display, in moredetail.pl, we replace it
with a query on the accountlines.
Test plan:
1) Apply patch
2) Pay off a LOST item
3) Check for the associated display of 'Paidfor?:' on the itemdetails
page
4) Writeoff a LOST item
5) Check that a 'Paidfor?:' is not displayed on the itemdetails page.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch introduces after-action hooks for
- C4::Biblio::{Add|Mod|Del}Biblio
- C4::Items::{Add|Mod|Del}Biblio
After the action has taken place, a call to a helper method is done,
which loops through all plugins implementing the hooks, and calls the
plugin method. The related object is passed, along with an 'action'
string specifying the action that took place, and the object id (which
is specially important for the 'Del' case).
To test:
- Apply this patchset
- Run:
$ kshell
k$ prove t/db_dependent/Biblio_and_Items_plugin_hooks.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch changes pending_hold to has_pending_hold to signify that
we're returning a boolean and not a Koha::Hold object.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply all patches except this one
2) Checkout out an item to a patron
3) Check the item in - note that this will fail
4) Apply this patch, and repeat steps 1-3, noting instead that the the
check is instead successful
5) Verify also that reserves act as expected
5) Sign off
Sponsored-by: Catalyst IT
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new syspref "UpdateItemLocationOnCheckin" which
accepts pairs of shelving locations. On check-in the items location is
compared ot the location on the left and, if it matches, is updated to
the location on the left.
This preference replaces ReturnToShelvingCart and
InProcessingToShelvingCart preferences. The update statement should
insert values that replciate these functions. Note existing
functionality of all items in PROC location being returned to
permanent_location is preserved by default. Also, any items issued from
CART location will be returned to their permanent location on issue (if
it differs)
Special values for this pref are:
_ALL_ - used on left side only to affect all items
_BLANK_ - used on either side to match on/set to blank (actual blanks
will work, but this is an easier to read option)
_PERM_ - used on right side only to return items to permanent location
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateitemLocationOnCheckin
to the following (assuming sample data):
NEW: FIC
FIC: GEN
4) Create an item, set its location to NEW
5) Check in the item, note its location is now FIC
6) Check in the item again, note its location is now GEN
7) Check in the item again, note its location remains GEN
8) Test using _ALL_, _BLANK_ and _PERM_ for updates
9) Try entering various incorrect syntax in the pref and note you are warned
Sponsored by:
Arcadia Public Library (http://library.ci.arcadia.ca.us/)
Middletown Township Public Library (http://www.mtpl.org/)
Round Rock Public Library (https://www.roundrocktexas.gov/departments/library/)
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a 'pending hold' column to C4::Items:GetItemsInfo to
allow for displaying status of an item when it has been selected for a
hold by the holdsqueue and AllowItemsOnHoldCheckout is set to 'Don't
allow'
To test:
00 - Set AllowItemsOnHoldCheckout to 'Allow'
01 - Place a hold on an item
02 - Build the holdsqueue (kohadevbox example below)
sudo koha-shell kohadev
perl misc/cronjobs/holds/build_holds_queue.pl
03 - Search for the item on the OPAC
04 - Note item shows as 'Available' in results and details
05 - Toggle AllowItemsOnHOldCheckout to 'Don't allow'
06 - Repeat search, note there is no change
06 - Apply Patch
07 - Search for the item on the OPAC
08 - Note that item now shows as 'Pending hold'
09 - Toggle AllowItemsOnHoldCheckout to Allow
10 - Note item shows as available
11 - prove -v t/db_dependent/Items.t
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Forced by removal of C4::Items::GetItem from Bug 21206
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Automatic item modification by age cronjob is based on rules with conditions and substitutions.
When substitution value is equal to actual item value, the code should not call C4::Items::ModItem. It adds unnecessary action log and entry in zebraqueue.
With a rule than can impact all catalogue you can explode your database with action logs.
Test plan :
1) Run prove t/db_dependent/Items/AutomaticItemModificationByAge.t
2) Define a item modification by age with no condition
3) Run several times misc/cronjobs/automatic_item_modification_by_age.pl
4) Check it creates only one entry in action_logs and zebraqueue
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
substitutions field stores the item field with 'items.' prefix.
Looks like call of C4::Items::ModItem() works but it will not if ORM object is used in the futur.
So I prefer fix it now and it is needed for main patch.
Test plan :
Run t/db_dependent/Items/AutomaticItemModificationByAge.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The PrepareItemrecordDisplay method used to generate the item
display on receiving serials was using a hardcoded maxlength
of 255 on input fields. This patch updates it to use the
maxlength defined in the frameworks instead as the normal
item form does.
To test:
- Create or reuse an existing subscription
- Make note of the framework the record uses
- Add an item on receive
- Check the maxlength on the various fields is set to 255
(check source code or use developer tools)
- You can also verify that by adding a long note to
one of the note fields
- Apply patch
- Repeat tests, the maxlength should now be 9999
- In your framework settings, change the length of one
of the subfields to another value
- Verify that the item form reflects the change
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
